Used Max Simmel for sale (24,611)

Condition: used, maximum load weight: 36,755 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire stock of vehicles, including those available immediately or at short notice, on our website. Excerpt of equipment features. Full specification available upon request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading platform approx. 30 mm thick timber flooring, set in Omega profiles * 10 pairs of folding lashing rings (LC 2,500 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Loading width approx. 2,480 mm Landing legs: * JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW air-suspended axles with disc brakes (approx. 430 mm), with lift/lower function (ET 120) * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Axle toolkit Tyres: * 385/65 R 22.5 tyres Brake system: * Brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: Nksdpfx Aoya Shljgnsu * Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * High-quality single-colour 2-component (2K) top coat in RAL 3002 carmine red * Rear section metallised and coated in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings at the galvanised front connection rail * 2" king pin * Yellow reflective tape to EU regulations, fitted to sides, extension and rear of trailer * European reflective warning boards (red-yellow) at the rear of the trailer * Loading platform approx. 30 mm thick timber flooring, set in Omega profiles * Holder for approximately 1,000 mm long stakes, mounted at rear central beam * 1 spare wheel holder under the loading platform, left side * Bracket for rotating beacon at the rear of the trailer * At the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Load pressure gauge for axle load determination including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Folding aluminium side boards with rear double-wing doors (anodised), on the sides of the loading platform, approx. 600 mm high, with KINNEGRIP folding posts * Holder for aluminium side boards, mounted under the platform before the axles * Holder for KINNEGRIP posts, under the platform behind the axles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, fitted to the outer frame of the platform * Rear underrun protection, left and right on the rear traverses * 6 pairs of WADER container locks in the platform, for 1x 20' container, 2x 20' containers or 1x 40' container * 1 INOX toolbox, approx. 600 x 350 x 600 mm, fitted under the platform left side * 4 pairs of stake pocket strips fitted longitudinally on the loading platform, for plug-in stakes 100 x 50 mm * Lifting axle on the front axle, controlled by TEBS E in line with current axle load and loading condition * On the warning boards, holder for beacon * Acoustic reverse warning signal * 2 LED reversing lights mounted on rear panel * HRM (High Resistance Metallisation) metallisation of outer frame

Condition: new, maximum load weight: 33,750 kg, overall weight: 47,000 kg, axle configuration: 2 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Neck: - Gooseneck in SNT design to optimize load platform length, approx. length 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical kingpin load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines run protected inside the extendable beams and adjust automatically to the respective bed length - 5 pairs of fold-out lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for fitting bolted RUD rings Rear running gear: - Rear running gear with closed outer frame, checker plate surface, and continuous prism-shaped digger recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of laying lashing rings in the recess LC 16,000 daN - 1 pair of laying lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE system, all axles forced-steered hydro-mechanically - Hose break valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Axles finished with 2 layers of 2K paint, single-color painted in FAY-Grey-34-0260 - Technical axle load: 12,000 kg per axle, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – Brand at our discretion. Load index (146/146F) TPMS: - TPMS tyre pressure monitoring system according to ECE R 141 Brake system: - Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Electrical system: - Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal Nksdpfx Aoxbmn Usgnsu - ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: - Complete steel structure automatically shot-blasted after welding with a blast wheel system - Second blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red per RAL system 841GL Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear via cable control with push buttons, including axle tracking control (without installation in tractor unit) - Electro-hydraulic power unit - 2 pairs of bolted container locks on the outer beams; includes 2 pairs of container locks for 1 x 20' or 1 x 40' container - On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H) - Rear galvanized plug-in stakes are removable

Condition: used, mileage: 112,448 km, power: 232 kW (315.43 HP), first registration: 08/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, 1344Bh 4/25 Left-hand drive, differential lock, steered/liftable trailing axle, stop brake for waste collection vehicle, 3-seater, ASR, ADR, central locking, speed limiter 30/85 km/h, radio, rotating beacons, pop-up roof, decorative inlays, armrests, sun blind, cornering light, daytime running light, LED position lights, emergency brake signal (ESS), Brake Assist 2, Lane Guard System 4, HS turning assistant, Olympus Industrial 23 m³ with HS dumping hopper Comfortlift type U-K-KL EuroMax, suitable for 80 l to 5 m³, bulky waste collection with foldable chute, comfort gearshift, central lubrication system, hopper lifts approx. 2 t, Welvaarts scales Njdpfx Agewcikqjnoku

Condition: used, mileage: 347,649 km, power: 368 kW (500.34 HP), first registration: 01/2022, fuel type: diesel, color: white, gearing type: automatic, Equipment: had accident, LOCATION: Nedpfeyf Thdex Agneku Ales Kresnik Transporte Albert-Tillmanns-Weg 12 D – 42899 Remscheid Tel: !!!ENGINE DAMAGE!!! General condition: EURO VI, E, M, in relation to age and usage, the vehicle/object is in a condition typical for its age and use, apart from the described damages/defects. Number of seats: 2 Detail info on COLOR -1-: White, solid paint Detail info on COLOR -2-: LOGO Drive type: Diesel Number of axles: 2 Number of driven axles: 1 Overall length: 5911 mm Overall width: 2540 mm Overall height: 3925 mm Axle 1: Tyres: Left 315/60 R 22.5, W/O, . , 6 mm Axle 1: Tyres: Right 315/60 R 22.5, W/O, . , 6 mm Axle 2: Twin tyres: Left inner 295/60 R 22.5, W/O, . , 10 mm Axle 2: Twin tyres: Left outer 295/60 R 22.5, W/O, . , 10 mm Axle 2: Twin tyres: Right inner 295/60 R 22.5, W/O, . , 10 mm Axle 2: Twin tyres: Right outer 295/60 R 22.5, W/O, . , 10 mm

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate Nksdpfxeyg Ecvj Agnju (Prices may change with significant fluctuations)

Condition: good (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KPL91607, mileage: 75,063 km, power: 368 kW (500.34 HP), first registration: 03/2024, fuel type: diesel, empty load weight: 8,581 kg, maximum load weight: 9,419 kg, overall weight: 18,000 kg, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 06/2026, fuel: diesel, fuel tank capacity: 1,050 l, brakes: intarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power mirror, seat heater, second fuel tank, soot filter, traction control, Our vehicle number #30587 - Sleeper cab, long version - Euro VI emission standard - 500 HP - 4x2 drive - Wheelbase: 3,600 mm Nksdox H Svkspfx Agnsu - Intarder - BL suspension - Tire size: 315/70 R 22.5 - Fuel tank capacity: 600 liters - Additional tank: 450 liters - Color: frost white - Fifth wheel height: 1,130 mm - Permissible gross weight: 18,000 kg - Payload: 9,419 kg - Unladen weight: 8,581 kg - Differential lock - Automatic transmission - Air conditioning - Disc brakes - Auxiliary heater - Cruise control - Traction control - Aerodynamics package - 2 bunks - Driver’s air-suspension seat, heated - Electric stationary air conditioning - Ford multimedia audio system - Navigation system - Refrigerator - Adaptive cruise control (ACC) - Emergency brake assist (AEBS) - Forward collision warning system (FCW) - Lane departure warning system (LDWS) - Hill start assist - Electronic Stability Program (ESP) - Eco-roll function - Air-sprung front axle - Diesel particulate filter (DPF) - Side underrun protection (SB) - Central locking with remote control - Rain sensor - Electric windows (double) - Electrically adjustable & heated exterior mirrors - Cornering lights - Front fog lights (NSW) - Lane assist (ASW) - LED daytime running lights - Electric sun blind - Roller blinds, left & right - Communication preparation (NA pre-installation) - Rear axle load indicator - On-board computer - Leather multifunction steering wheel - Max Cruise Level - Air gun Financing available on request!

Condition: good (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KNP96309, mileage: 211,687 km, power: 368 kW (500.34 HP), first registration: 05/2023, fuel type: diesel, empty load weight: 8,581 kg, maximum load weight: 9,419 kg, overall weight: 18,000 kg, tire size: 315/70 R 22.5, tire condition: 80 %, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 06/2026, fuel: diesel, fuel tank capacity: 1,050 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, hill-start assist, lane keeping assist, navigation system, onboard computer, parking heater, power assisted steering, retarder, seat heater, second fuel tank, soot filter, spoiler, tire pressure monitoring, traction control, our vehicle number: #30346 Ford F-MAX 500 Tractor Unit Cab: Sleeper Cab Long, air-suspended Euro 6 DPF Diesel Particulate Filter Auxiliary brake: Intarder Diesel Tank: 600 + 450 ltr. Rear axle air suspension Tyres: 315/70 R 22.5 Aluminium rims Disc brakes ABS EBS ASR ESP Transmission: Automatic Differential lock Rocking mode PTO preparation Cruise control ACC Adaptive Cruise Control AEBS Emergency Brake Assist FCW Forward Collision Warning System LDWS Lane Departure Warning System Hill Start Assist Eco-Roll Max Cruise Level Full aerodynamic kit 2 bunk beds Refrigerator Driver’s air-suspended seat/heated Electric sunroof Electric windows (double) Electric/heated exterior mirrors Ford Multimedia Audio System Navigation system Sun visor Electric sunshade Sun blind left/right Central locking with remote control Rain sensor LED daytime running lights Cornering lights Nsdpfxsw H I I Ae Agnoku Fog lights Work lights Rear axle load indicator On-board computer Leather multifunction steering wheel Reverse warning system Tyre temperature and pressure monitoring system Air blow gun Trimble Truck4U Leasing or financing also available on request!

Condition: good (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KNB97428, mileage: 177,123 km, power: 368 kW (500.34 HP), first registration: 06/2023, fuel type: diesel, empty load weight: 8,581 kg, maximum load weight: 9,419 kg, overall weight: 18,000 kg, tire size: 315/70 R 22.5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 06/2026, fuel: diesel, fuel tank capacity: 1,050 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, hill-start assist, lane keeping assist, navigation system, onboard computer, parking heater, power assisted steering, retarder, seat heater, second fuel tank, soot filter, spoiler, tire pressure monitoring, traction control, Our vehicle number: #30345 Ford F-MAX 500 Tractor Unit Cab: Sleeper cab, long, air-suspended Euro 6 DPF Diesel Particulate Filter Additional brake: Intarder Diesel tank: 600 + 450 liters Rear axle air-suspended Tyres: 315/70 R 22.5 Alloy wheels Nkedpowuyw Sefx Agneu Disc brakes ABS EBS ASR ESP Transmission: Automatic Differential lock Rocking mode PTO pre-installation Cruise control ACC Adaptive Cruise Control AEBS Emergency Braking Assistant FCW Collision Warning System LDWS Lane Departure Warning System Hill Start Assist Eco-Roll Max Cruise Level Full aerodynamic kit 2 bunks Refrigerator Driver’s air-sprung seat / heated Electric sunroof Electric windows (double) Electric / heated external mirrors Ford Multimedia Audio System Navigation system Sun visor Electric sunblind Roller blind left/right Central locking with remote control Rain sensor LED daytime running lights Cornering lights Fog lights Work lights Rear axle load indicator On-board computer Leather multi-function steering wheel Reverse warning system Tyre temperature and pressure monitoring system Air gun Trimble Truck4U Leasing or financing possible upon request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Euromecc Euro5 MAX Wet – double mixer Year of manufacture: 2019 Theoretical output: approx. 120–150 m3/h Total production to date: 145,000 m3 5 hoppers – each 45 m3 Silo feeding via belt conveyor Truck loading (hopper volume 25 m3) COMPLETE plant with winter enclosure Mixers: 2 planetary mixers with turbomixer (EUROMECC MEP 2000) Aggregate dosing – weighing hopper Mixer feeding via Y-shaped dosing system (1 weighing hopper for 2 mixers) Water: 2 units / 1 water level per mixer (capacity 500 kg per level) Nkjdeym Uw Nopfx Agneu Additive dosing: 2 units / 1 additive scale per mixer (2x12L) Cement: 2 units / 1 cement scale per mixer (capacity 1000 kg per scale) Cement silos: 6 units 4 x 150 m3 (D = 4.6 m) 2 x 75 m3 (D = 3.5 m) Control container (ElettronData)/operator station included Plant in excellent condition and fully operational. WE ALSO CONSIDER TRADES WITH ALL VEHICLE BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR WITH EARTHMOVING MACHINERY SUCH AS CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Nkedefh Hahopfx Agnsu Maximum pressure 10 bar tank capacity 270 l Air outlet ½ " UNIT 1 Dimensions and weights Length approx. 1200 mm width/depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Input power electric motor 7,5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Engine(s) Motor type Electric Location: From warehouse 54634 Bitburg - immediately available-

Condition: good (used), Year of construction: 2000, Hettich Blue Max 8 hardware drilling machine Make Hettich Type Blue Max 8 FS Number of spindles in row 5 pieces Press-in die Workpiece clamping cylinder 2 x pneumatic Pneumatic drilling feed Stop rulers Pendulum stops Foot control Space requirement approx. 1200 mm x 700 mm x 1500 mm Weight approx. 150 kg Some drill bits included The stops cannot be seen in the photos, but are included Noder Igt Dopfx Agnsku Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2024, condition: used, For inquiries about the crawler, Mr. Herden will be happy to assist you by phone. Seppi M. MAX 75 HP / 75 PS / Radio-Controlled Crawler Vehicle / Recovery Winch / Seppi M. MICROFORST rc 155 Forestry Mulcher / Seppi M. H 5 rc 175 Mulcher / In stock & immediately available Price for crawler without attachments: €126,190.00 net / €150,166.10 gross Standard configuration and features: Dimensions*: - Total width with tracks retracted: 1,650 mm - Total width with tracks extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Track length: 1,570 mm - Track width: 230 mm - Lateral/longitudinal incline: 55° Nsdpsyfrpgefx Agnoku - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Power: 55 kW / 75 HP - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversible fan (automatic fan cleaning) Drive: Hydraulic system for attachments: - High-flow hydraulic circuit (closed loop) for attachments (double-acting): - Capacity: max. 93 l/min at 2,750 rpm - Pressure: 380 bar Service hydraulic system: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: max. 15 l/min at 2,750 rpm - Pressure: 200 bar Vehicle hydraulic system: - Capacity: max. 154 l/min at 2,750 rpm - Max. pressure: 400 bar Undercarriage: - HIGH GRIP: Stability and traction on inclines up to 55° under optimal conditions - Hydraulically adjustable vehicle width 800 mm (2x400 mm) - AUTO TRACK TENSION: Active automatic track tensioning - Patented track derailing protection - Stability and traction due to robust tread and large contact area of the tracks Control: - Radio remote control with graphic display (vital machine parameters and tilt indicator) - Range: 150 m - Potentiometer for speed control with variable travel speed from 0 to 100% Lifting system: - FLOAT: Lifting mechanism with assisted float position (contact pressure regulation) Standard equipment: - Vehicle with rollover protection bar - LED headlights - Internal components protected by highly robust steel covers - Underguard to protect engine and hydraulics - Colour: anthracite RAL7021 | red RAL3020 OPT 573 Bio hydraulic oil OPT 221 Rear forestry protection with recovery winch. Optional: SEPPI M. MICROFORST rc 155 – Hydraulic forestry mulcher Price: €23,130.00 net / €27,524.70 gross Optional: SEPPI M. H5 rc 175 – Hydraulic mulcher Price: €13,770.00 net / €16,386.30 gross We have a large selection of various Seppi M. products in stock and immediately available! Mr. Herden (Tel.) will be happy to assist you. Upon request, we can also provide financing offers. We are an official Seppi M. distributor and service partner. We supply the complete Seppi M. product range! Errors and prior sale excepted! Rental available = More information = New: Yes Contact Marius Herden for further information.

Condition: new, Year of construction: 2026, The Holzing G-MAX 380 straight edge bander with pre-milling and corner deburring ensures a high-quality end result. Coils up to 3 mm thick and strips up to 4 mm, this inexpensive machine comes with 1.2 kg glue tank, pre-milling, automatic gluing, edge cutting, end trimming, up-down milling, radial scraper and polishing function. As standard, it is equipped with an easy-to-use control panel with a touch screen. Feed speed 7 m / min. Board thickness 12-45 mm Edge thickness 0.4 - 3 mm Nksdpfsgyi Tvex Agnju Min. Board width 90 mm Minimum plate length 170 mm Earning corners min. plate length (12-30mm) 170 mm Earning corners min. plate length (30-45mm) 220 mm Table working height 856 mm Extended support width 560 mm Dust extraction Ø4 "* 3 Engine power 6.0 kW-1 HP; 5.75 kW-3 HP Net / gross weight 500 kg / 632 kg Package dimensions: 2920x720x1320 mm Pre-milling 12,000 rpm Milling front / rear 12,000 rpm Milling up / down 10500 rpm Polishing 2800 rpm. Feed motor power 0.75 kW Pre-milling motor power 1.5 kW Spindle motor power with adhesive 0.25 kW Front / rear milling power and corner making 0.35 kW Up / down milling power 0.55 kW Polisher motor power 3KM-0.12 kW; 1KM-0.18 kW Preheating power 0.4 kW Heating power of the glue tank 1,315 kW Collecting size of the pre-milling machine 0 - 2 mm

Condition: used, No. 3254 Hinge-hole boring machine / hinge-hole drilling machine Hettich Blue Max Mini Used Hinge-hole boring machine / hinge-hole drilling machine Hettich Blue Max Mini together with a hole-line drilling machine Technical data Hettich Blue Max Mini: Drill motor 400 V, 1.1 kW, 2800 rpm Pneumatic feed Technical data hole-line drilling machine: 1.1 kW, 2800 rpm With foot pedal Transport dimensions approx. 1200 x 800 x 900 mm LWH Nksdpex T Rzfefx Agneu Weight approx. 100 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 1991, weight of the machine ca. 1,5 t ja Nkjdsx Ni E Iepfx Agneu

Condition: new, Year of construction: 2026, Compact machine with pre-milling unit. Nkodpfx Aged H Elkenou Technical data: • Feeding speed – 7 m/min. • Panel Thickness - 12-45 mm • Edge Thickness – 0,4 – 3 mm • Mini. Panel width – 90 mm • Mini panel length – 90 mm • Working table height - 856 mm • Extensible support width - 560 mm • Extraction connector Ø in mm - Ø4" • Total Motor Power - 6,0 kw-1PH ; 5,75 kw-3PH • Overall Size (LxWxH) – 3200 x 1200 x 1200 mm • Weight, kg (with standard equipment) – 500 kg / 632 kg (N.W./G.W.) • Packing size (LxWxH) – 2820 x 720 x 1320 mm • Pre-milling – 9000 rpm • Up/down – 10500 rpm • Front/rear – 8800 rpm • Buffing – 2800 rpm • Power (kW) of each motor : • Feeding motor – 0,75 kW • Glue spindle motor - 0,25 kW • Front/rear trimming motor - 0,18 kW • Flush trimming motor - 0,55 kW • Upper buffing motor – 3 ph-0,12 kW; 1ph-0,18 kW • Lower buffing motor – 3 ph-0,12 kW; 1ph-0,18 kW • Pre-heating – 0,4 kW • Glue pot heating (5 elements) – 1,315 kW

Condition: used, maximum load weight: 39,780 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from equipment – full equipment list on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear slope approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed front lashing rings in the platform (LC 10,000 daN) * Cutouts in the outer frame for lashing strap hooks (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with checker plate covering Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * 205/65 R 17.5 twin tyres Axles: * BPW axles, two fixed axles, two air-suspended trailing steering axles with drum brakes and lift/lower function * Trailing steering axles can be locked electronically during reversing via reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Nsdpfxsx Uvlro Agneku Painting: * First-class, durable anti-corrosion protection on the standard shot-blasted welding frame, ensured by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single color, RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 pure white * Wheels in silver Electrical System: * Electrical system according to EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Spare wheel carrier in front of front wall * Yellow-red air couplings at the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Mounts in the rear area of the gooseneck for ALU ramps * Galvanized folding supports under the rear slope of the loading platform * Bracket for warning beacon at rear of trailer * Yellow reflector tape as per EU regulations on sides, sliding section, and rear of trailer * On gooseneck and rear end, left and right, holders for warning boards incl. socket * Mud flap at rear of trailer * Manual and documentation on USB stick * European reflector signs (red-yellow) at rear * 80 km/h speed stickers at rear and both sides * Acoustic reverse signal * Load manometer for axle load determination incl. load diagram

Condition: new, maximum load weight: 34,660 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Nkedpek Ugacefx Agnju Loading area: * Loading platform in double-extendable design with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing gear: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice Axles: * BPW axles, hydro-mechanically forced steering * Air suspension with lift and lower valve * Axle tool kit Brake system: * Brake system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: * Top quality, long-lasting corrosion protection of the standard shot-blasted welded chassis, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-colour in RAL 3002 carmine red * Rear section metallised and painted in RAL 9010 (pure white) * Wheel rims in silver * Metallic paintwork not possible Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets; connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including accessories: * Remote steering from front and rear via cable remote control with push buttons, with single-track axis control (without installation in the tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with bracket on front wall * 2-inch king pin * Yellow-red air couplings on galvanised front connection panel * Yellow reflective tape according to EU regulations – on the sides, on the sliding extension and at the rear of the trailer * European reflective warning plates (red-yellow) at the rear of the trailer * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Loading area with heavy-duty hardwood floor * 10 pairs of stake pockets for plug-in stakes, 100 x 50 mm, in the outer frame * Bracket for rotating beacon at the rear * Galvanised supports under the loading area taper * Bracket for rotating beacon at the rear * Hook-in profile for ALU loading ramps at the rear of the vehicle * 80 km/h speed stickers, rear and both sides * Load gauge for axle load determination, including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard grease NLGI-2 and removable guard around the pump * Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m length, max. 250A) between trailer and tractor unit with connector (NATO-NATO) * Anti-slip sand layer painted onto the centre beam * 6 pairs of WADER container pockets in the loading platform, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; in the extension, an additional ...

Condition: like new (used), Year of construction: 2024, functionality: fully functional, FARO Quantum M Max 3.0m – 7-axis measuring arm for sale incl. Polyworks We, R+S Metallbearbeitung & Lasertechnik GmbH & Co. KG, are selling a FARO Quantum M Max 3.0 m 7-axis FaroArm, 6th generation. Features - FaroArm Quantum M Max, 3.0 m, 7 axes - Bluetooth and Wi-Fi technology - Calibration kit - Mounting plate - iProbes (3 mm & 6 mm) - USB cable & power supply - Robust transport case - 1 rechargeable battery Additionally: Nsdpfsw R Tk Nsx Agnoku - Magnetic Mount G3+ (150 mm) - iProbe adapter (M4 thread) - Software: Polyworks incl. IGES & STEP - "Complete Care" service plan valid for 5 years (maintenance, calibration & repairs) (4 years remaining) Location: 32130 Enger, Germany If you are interested or have any questions, we look forward to hearing from you.

Condition: good (used), Year of construction: 2022, functionality: fully functional, We are offering our Kornit Atlas Max, built in March 2022, for sale. The machine is first-hand, has always been well-maintained, and regularly and professionally serviced under a maintenance contract. Machine details: • Model: Kornit Atlas Max • Year of manufacture: March 2022 • Location: Germany • First-hand • Regularly serviced (maintenance contract in place) • Very good condition - fully functional and ready for use • Excellent print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer need the Kornit Atlas Max. We have always been very satisfied with the machine and can fully recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. Nkodpfx Ajv Sci Tognju • Perfect for companies specializing in on-demand production and custom print jobs. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in delivery: • Kornit Atlas Max DTG printer • Maintenance records and documentation • Original accessories A viewing and demonstration of the machine is possible at any time by arrangement. You are also welcome to conduct a test print on-site to see the print quality for yourself. If you are interested, we look forward to hearing from you! An excellent offer for anyone looking for a powerful and reliable DTG printing machine! ----- We are offering our Kornit Atlas Max, manufactured in March 2022, for sale. The machine is first-hand, has been well-maintained, and has been regularly and professionally serviced under a maintenance contract. Machine Details: • Model: Kornit Atlas Max • Year of Manufacture: March 2022 • Location: Germany • First-hand ownership • Regularly serviced (Maintenance contract available) • Excellent condition - fully functional and ready for immediate use • Outstanding print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer require the Kornit Atlas Max. We have always been very satisfied with the machine and can highly recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print orders. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in the sale: • Kornit Atlas Max DTG Printer • Maintenance documentation and records • Original accessories Inspection and demonstration: An inspection and demonstration of the machine can be arranged at any time by appointment. We are also happy to perform a test print on-site to demonstrate the excellent print quality. Price and Contact: If you are interested, we look forward to hearing from you! A fantastic opportunity for anyone looking for a powerful and reliable DTG printing machine!

Condition: excellent (used), ALP passenger lift Here we offer you an ALP passenger lift. ALP passenger lift PHCI 800 EU 1 Maximum working height 8m, payload 140kg, for inside and outside The ALP lift type PHC800 is a particularly compact passenger lift that impresses with its extremely small space requirement and particularly lightweight construction. The transport dimensions are also so compact with a height of 1.98m and a width of just 0.77m that the model easily fits through a standard door. Despite this space-saving design, the PHC 800 impresses with its high performance. The working height of the ALP lift PHC800 is 8m and that with a maximum payload of 140kg. The robust aluminum construction and the hot-dip galvanized chassis ensure enormous stability and maximum durability. Like all ALP passenger lifts, the PHC series is available with either hand or foot control and can be used flexibly both indoors and outdoors. Developed and built in accordance with the applicable safety regulations, all PHC lifts also bear the CE mark. Areas of application: The ALP passenger lift PHC 800 can be supplied with various accessories and is therefore specifically suitable for various areas of application. Working height: 8.00 m Standing height: 6.00 m Payload: max. 140 kg Height: 1.98 m Floor area (indoor use): approx. 1.41 m x 1.39 m Nodpfx Aovx Th Hegnjku Floor area (outdoor use): approx. 2.43 m x 2.28 m Own weight: approx. 280 kg Maintenance platform for 1 person: ALP PHCI 800 Approved for indoor and outdoor use Version EU1 Drive / Motor: Single-phase AC electric motor 230V/50Hz 1.5KW Control 12V/13V DC Supply cable 3x1.5 Protection class IP 55 Type: PHCI 800 EU 1 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Nodotwphwepfx Agnsku Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: used, used, great condition, little usedMake HettichType Blue Max mini PMPneumatic drill feedStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Nodjvwf Dqepfx Agneku

Condition: good (used), Pipe grab, round grab -self-locking Nkjdjb A I Sbspfx Agnsu -Replacement arms -up to approx. max.: Ø 150 cm -Clamping claws -Total weight: 350 kg

Condition: good (used), Cardan shaft, drive shaft -Flange: Ø 120 mm Nsdpeb A Nfrjfx Agnoku -Toothed shaft: Ø 50 mm -min. length: 665 mm -Max. length: 780 mm -Weight: 14 kg