Used Manual Crimping Machine for sale (72,124)

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Podpfjzmyzfex Adzjra

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Pedpfx Adozg D I Aszsra NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: good (used), Year of construction: 2019, 400mm swing, 220mm max turning diameter, Pedpfx Asyyaq Njdzera 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4500rpm, 3 jaw chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor,

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger. Pedpeq R Tnzjfx Adzora

Condition: new, sheet length: 1050sheet thickness: 1,0weight approx.: 0,185messurements (LxWxH): 1,4x0,7x1,12 Psdpfjd Eqrpjx Adzjra

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 06584, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: Hurco Ultimax, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Axes: 3 Travel in X-axis: 1,020 mm Travel in Y-axis: 510 mm Travel in Z-axis: 610 mm Spindle speed (max.): 8,000 rpm Motor power: 15 kW Table length: 1,220 mm Table width: 510 mm MACHINE DETAILS Control system: Hurco Ultimax Drive system: CNC Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,350 x 2,400 mm Psdpfjzuw A Nsx Adzsra Weight: 5,000 kg Shipping packages: 1 EQUIPMENT Documentation CE marking

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Prsdpfxszf Nk Tj Adzea Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO. Pedpfx Ajy Nd Sisdzora

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK Prsdoy Du N Uopfx Adzsa COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: new, bending length: 1050sheet thickness: 3.3upper roll diameter: 90 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel Podpsd Ab T Asfx Adzsra - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 274,-- - Hardened rolls EURO 480,-- - Variable speed of Rotation  We have many references!

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA1/017825, functionality: fully functional, travel distance X-axis: 5,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, number of slots in tool magazine: 12, TECHNICAL DETAILS Number of controlled axes, milling spindle: 5 Tool holder: HSK-F63 Type of milling table: Cross table Tool changer positions: 12 Working area, X-axis: 5,200 mm Working area, Y-axis: 1,550 mm Working area, Z-axis: 160 mm MACHINE DETAILS System/Software: SCM Maestro Vacuum pump Manufacturer: Becker Type: VTLF 2.250/0-791 Year of manufacture: 2014 Main motor power: 5.5 kW Capacity: 244 m³/h Negative pressure: 200 mbar Overall length: 9,000 mm Pedpezuwt Usfx Adzsra Overall width: 5,000 mm Overall height: 3,100 mm EQUIPMENT Vacuum pump Becker VTLF 2.250/0-791 Manual control CNC documentation on USB stick Safety light curtain Safety fence CE certificate Documentation

Condition: new, bending length: 2050sheet thickness: 1.8upper roll diameter: 95sheet length: 2050 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  Predpfx Adod Ab Tuozoa - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 432,-- - Hardened rolls EURO 940,-- - variable speed of roation  We have many references!

Condition: repair required (used), functionality: unexamined, Year of construction: 1990, overall weight: 92,000 kg, load capacity: 20,000 kg, working height: 8,500 mm, Equipment: documentation/manual, Two rail-mounted electric container gantry cranes are offered for sale from an industrial site in Riga, Latvia. The cranes were designed for loading, unloading, transferring and stacking ISO 1C and 1CC containers. Their 20,000 kg rated lifting capacity, 25 m span and powered travelling trolley make them suitable for container terminals, railway yards, ports, logistics hubs and industrial storage areas. The cranes were manufactured in 1990 by KRAN / Uzlovsky Machine-Building Plant in the Tula region. The factory type designation is 20-25-8.5-5. Two units are available. Podpfszmtcijx Adzsra EQUIPMENT AND DOCUMENTATION Rail-mounted gantry structure with electrically driven crane travel mechanism. Powered travelling trolley and main hoisting mechanism. Operator cabin control. The factory passport specifies a rotating 20 t container spreader for ISO 1C and 1CC containers; A technical passport for factory no. 029 is available in Latvian and Russian, including historical inspection and repair entries. Further technical information and detailed photographs can be provided on request.

Year of construction: 2018, condition: good (used), Bagging line consisting of Prjdpfx Aeinbhtsdzea Incline Conveyor with Flights and product speed control Weigher 4 Dispensing Buckets PLC Controller for complete system In good working order

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears - Top roll is idle ( free turning ) Pedsd Eqq Ajpfx Adzsra - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Options: - digital display EURO 858, -- Angular side guide rollers EURO 1,287, -- Double speed STANDARD Brake motor EURO 150, --                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears - Top roll is idle ( free turning ) Pjdpfxod Eqqzj Adzora - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working STANDARD - Brake Motor Option EURO 150,--                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Pedpfx Adoza T A Rozora Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! Podpfxozuw D Tj Adzsra MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking CE certificate

Condition: new, Year of construction: 2024, functionality: fully functional, Brand new machine never used, selling at very low price. Pjdjwcfvpspfx Adzsra

Condition: new, sheet length: 1275sheet thickness: 1,5weight approx.: 0,225messurements (LxWxH): 1,5x0,8x1,2 Prjdpfjd Eqqvjx Adzja

Condition: new, bending length: 1250sheet thickness: 2upper roll diameter: 75 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  Pedpfod Ab T Eex Adzera - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 314,-- - Hardened rolls EURO 465,-- - Variable speed of Rotation  We have many references!

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Podpfsyhdi Rsx Adzsra Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: new, bending length: 1050sheet thickness: 1upper roll diameter: 56 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover - Hardened rolls EURO 336,-- Prjdpfjd Ab Uxex Adzea We have many references!

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Prodpezu N Absfx Adzsa Automatic wire threading

Condition: new, Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400 Technical specifications: - Steel frame - Two rolls direct driven by a gear system - Rolls are hardened - Rolls shafts are special steel material hardened and ground - Roll shafts housed by bearings - Standard rolls - Guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working   EURO 600,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   PK 35 file TypeSizeMin. DiaNotes160x10         40x10500         400Standard Rolls2100x15         60x10450         350Standard Rolls335x35         20x20900         300Standard Rolls4Ø 35         Ø 30600         400Optional Rolls5Ø 70x2         Ø 30x21000         500Optional Rolls62”x2,9         1”x2,31000         350Optional Rolls7 70x30x2         50x40x31200 Prodpfx Aded Eqqwozsa         1200Optional Rolls8 50x3         40x31700         600Optional Rolls9 50x50x5         40x40x5800         600Optional Rolls1050x50x6         30x30x31000         500Optional Rolls1160x7         30x4 700         400Standard Rolls1260x7         30x4800         500Standard Rolls1360x7         30x4 700         500 Standard Rolls14UPN 80         UPN 301000         500Optional Rolls*15UPN 80         UPN 301200         800Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength