Used Maintenance Furnace for sale (6,801)

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Itedpfxeyabxys Amieg Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Ijdpfx Aoyvix Ismijtg

Condition: not inspected (used), Padeltherm shaft furnace Itodoywt I Nspfx Amisg Must be dismantled and collected by the buyer.

Year of construction: 1994, condition: used, max. temperature 1100 Grad voltage 230 V output 3 kw Isdpfothr Ncex Amistg range - high tensile Innen 295x230x125 mm

Year of construction: 1990, condition: used, degree max 1800 Itsdpjrgbyvefx Amijg total power requirement 5 kW

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and a length of up to 300 mm. The hopper feeder sorts the parts and automatically loads the inductor with consecutive pieces for heating. The feeder is ideal for producing large nails, screws, etc. Its operation can be seen in a YouTube video. The efficiency is very high. For small elements, heated parts at 1100 degrees are retrieved every 6 seconds. We have two inductors for the furnace to heat materials with thicknesses up to 20mm and up to 16mm. It is possible to modify the furnace to suit your needs. Replacing the inductor with other sizes costs approximately 3000 EUR. The machine is very versatile in terms of the sizes of heated products. It is possible to heat flat bars, round rods, or square rods. Itjdpew Hqldjfx Amieg

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Itsdpfx Amjvcyf Toieg Heating capacity 100 KW

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With exhaust system and table Upward opening door keeps hot surface away from user Soft self-closing door (for 5, 13, 21 & 23 liter models) Standard start delay and process timer function Durable aluminum oxide support plates for the heating elements; sturdy door surround and base plate High quality fiber insulation with low thermal mass Itodpfx Amjpygpfoieg Powerful heating elements on both sides provide very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) Itjdpfx Aod Spx Domijg Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2000, condition: repair required (used), We are offering this SAFED conveyor belt furnace in need of repair, year of manufacture 2000. Numerous spare parts are included. Manufacturer: Safed Model: 1 used continuous furnace Year of manufacture: 2000 Operating temperature (hardening furnace): 870-930°C Gas power: 240 kW A Max. gross batch weight: 400 kg/h Max. batch width: 600 mm Quenching type: oil Tempering furnace: Gas power: 215 kW Operating temperature: 170-650°C Max. batch weight: 400 kg/h Washing machine: Max. batch weight: 400 kg/h Iodpfx Amjyr Atpjijtg The system is still operational until the end of March 2026. Several spare parts are also included. Original purchase value approx. €85,000. All prices are ex works Kehl; disassembly and all subsequent costs are the responsibility of the buyer. VAT is not included in the prices. Subject to prior sale and errors. Used equipment is sold without any warranty or guarantee. We cannot be held liable for personal injury or property damage during disassembly by the buyer. Place of jurisdiction is Germany. All agreements are made under German law. The material remains the property of the seller until full payment has been received. If you have any questions or require further information, please feel free to write us a message or give us a call.

Condition: new, # suitable for treatment under inert gas Ijdpfx Ajcdi R Ejmiotg # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Ijdpfxoxurpwe Amietg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Itodpfoim Ik Ssx Amijg Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: used, Year of construction: 2011, functionality: unexamined, total length: 1,700 mm, total height: 1,400 mm, total width: 680 mm, overall weight: 400 kg, Centrotherm VLO 20-N2-HCOOH Vacuum Furnace/Process System Itodpfxoyubphe Amieg Thermal process system with nitrogen and formic acid supply, including Leybold vacuum pump and control system. Year of manufacture: 2011. Well-maintained exterior condition, but without documentation and no available password – therefore only partially tested. Power: 10 kW; Load current: 25 A; Supply: 3/N~ 400/230 V 50 Hz; Breaking capacity: 0.3 kA; Operating hours: approx. 21,286 h

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valve: MS6-EM1-1/2 -Filter control valve: M56-LFR-1/2-D7-ERM-AS -Switching valves: M56-EE-1/2-V24 M56-EE-1/2-V24-S -Pressure build-up valve: M56-DL-1/2 -Branch module: M56-FRM-1/2-Y -Individual components: see photos -Number: 3x maintenance unit available -Price/Distribution: per piece, complete unit -Dimensions: 440/120/H340 mm -Weight: 5.2 kg/pc. Itjdpsx Ryiajfx Amisg

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve Itjdpjx Ryhisfx Amisg -Type: MS9-LFR-3/4-D7-EUM-AG-BAR-AS 562531 -Quantity: 1x filter control valve available -Dimensions: 440/115/H205 mm -Weight: 3 kg

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valves: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Filter control valve: M56-LFR-1/2-D6-CRV-AS -Branch modules: M56-FRM-1/2-Y -Pressure build-up valve: M56-DL-1/2 -Individual components: see photos Itjdpfx Amex Rx S Toisg -Price/Fee: complete -Overall dimensions: 440/340/H110 mm -Weight: 5.3 kg

Condition: used, Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Manufacturer: Festo, maintenance unit with filter and control valve orig -Type: LFR-1/8-D-MINI Iodpfxjiint Ns Amiotg -Pressure: max. 16/12 bar -Number: 1x filter control valve available -Price per piece -Weight: 0,5 kg/pc.

Condition: used, Filter bowl, pneumatic filter, filter regulator -Manufacturer: Festo, pneumatic filter type MS6-LF-1/2-CRV -Connection: G1/2 Itjdpsfvqvgofx Amisg -Pressure: max. 12 bar -Price: per piece -Number: 3 Stück -Dimension box: 280/120/H150 mm -Weight: 0.7 kg/Stück

Condition: good (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, filter regulator with pressure gauge -Type:LFR-1/4-D-MINI 159631 -Pressure: max. 16 bar -Quantity: 1x filter control valve available -Dimensions: 210/120/75 mm Iedpfx Amsxv S N Tjijtg -Weight: 0.6 kg

Condition: used, Filter control valve, on-off valve, service unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination Itedoiintwopfx Amieg -Manufacturer: Festo, maintenance unit with pressure sensor/switch, branching modules and filter -Pressure sensor: Type MS4-LFR-1/4-D6-ERM-AD1-AS -Pressure switch: type PEV-1/4-B-OD -Branch modules: Type MS4-FRM-1/4 -Individual components: see photos -Dimensions: 170/85/H220 mm -Weight: 1 kg

Condition: good (used), Filter control valve, switching valve, maintenance unit, water separator Ijdpsb A Ikzofx Amiotg -Manufacturer: Festo, Maintenance unit LFR-D-Maxi / HE-D-Maxi -Connection: 1/2 -Quantity: 16 pieces available Price: per piece -Dimensions: 220 x 270 x 90 mm / 280/270/130 mm -Weight: 2.5 kg/pc.

Condition: good (used), Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance device combination, filter control valve -Manufacturer: Festo, maintenance unit D-MIDI -On valve: HE-D-MIDI / HEE-D-MIDI-24 -Branch module: FRM-D-MIDI -Control valve: LFR-D-MIDI -Pressure: max. 16 bar Iedpfx Amsxlpu Ejistg -Individual components: see photos -Dimensions: 340/100/H270 mm -Weight: 3.1 kg

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valves: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Filter control valve: M56-LFR-1/2-D7-CRV-AS -Branch modules: M56-FRM-1/2-AD7 -Pressure build-up valve: M56-DL-1/2 Iedexvxw Rspfx Amiotg -Individual components: see photos -Price/Fee: complete -Overall dimensions: 470/300/H110 mm -Weight: 4.5 kg

Year of construction: 2012, condition: good (used), Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Handover: in the current condition as seen -Maintenance unit: incomplete, see photos -Manufacturer: Festo, maintenance unit from CNC machining center Santenberg GTC S 2 -Type: D-MIDI BD43 BO43 Individual components see photos -Pressure: max. 16/12 bar -Dimension: 530/105/H270 mm Itedpfsi Sdg Djx Amieg -Weight: 4.9 kg