Used Magazine Nailer for sale (2,086)

Condition: used, Year of construction: 1999, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm control: Unipro 90 Pallet changer 2x: 400 x 500 workpiece - installed height: 800 mm max. clampable workpiece diameter: 720 - 850 mm spindle taper:: SK 40 Dwedpfx Ajy Rmk Robzea spindle turning speed - stepless: 10 - 8000 1/min Spindle power: 20 / 30 kW Spindle Torque: 95/143 Nm tool magazin:: 80 SK 40 total power requirement: 55 kW weight of the machine ca.: 11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 - coolant device with coolant through spindle 7 pressure levels - full A & B-axis - chip conveyor *

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. Djdpfoyqybbsx Abzswa The machine has just received a new milling spindle. *

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Dwsdpoy S T T Usfx Abzea Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: used, Year of construction: 2015, Technical details: turning diameter: 65 mm turning length: 120 mm control: Index C200-4D SL z-axis main spindle travel: 390 mm z-axis subspindle travel: 390 mm x-axis subspindle travel: 600 mm Travel Y1: ± 80 mm Travel y2: ± 80 mm x-axis rapids: 45 m/min y-axis rapids: 15 m/min z-axis rapid travel: 45 m/min Spindle 1 RPM: 5000 1/min Spindle 1 Power: 35,5/27,5 kW Djdpfsyxpadjx Abzowa Spindle 1 Torque: 170 /125 Nm Spindle 2 RPM: 5000 1/min Spindle 2 power: 35,5/27,5 kW Spindle 2 torque: 170/125 Nm c-axis: 0,00014 ° bar material dia.: 65 mm spindle nose: AD 140 spindle bore: 85 mm Milling spindle 1 RPM: 18000 1/min Milling spindle 1 power: 11 kW Milling Spindle1 torque: 19 Nm Milling spindle 2 RPM: 18000 1/min Milling Spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axes swivel angle: 230 ° B-axes torque: 440 Nm B-axes angle resolution: 0,001 ° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 tool magazine static tools : 6 x VDI 25 internal coolant system feed: Knoll 80 bar / Ecofluid weight of the machine ca.: 16,3 t dimensions of the machine ca.: 3,73x2,92x2,58 m Accerories Chip conveyor Spindle 1 Chuck SMW HFKN 165-46 mm Spindle 2 Chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck subspindle Hainbuch Spanntop Barfeeder Interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main- and sub-spindle Conveyor for partsdisposal Air Filter Büchel High performance heavy duty turning and milling center with 2 multi axis milling heads and two spindles. Both milling heads are full 5-axis. The z-axes are installed in the spindle heads The x2 axis is installed in the spindle head of the subspindle Milling1 head has x/y/b -axes Milling head 2 has y/b-axes Both milling heads have B-(Swivel-)axis 230° The machine is equipped with an IRCO short barfeeder and parts gripper for finished parts. Max. dim for finished parts: Ø 65 mm, length 120 mm, weight 5 kg. Rest piece length 200 mm All linear- axes are equipped with linear scales. Coolant through main and subspindle. Tool breakage control from drill Ø 1mm All existing tool from machine are part of delivery Machine is in excellenten Condition! *

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Dedpfjyv Dnksx Abzewa Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: used, Year of construction: 2001, Technical details: turning diameter: 120 mm turning length: 100 mm control: Fanuc Spindle 1 power: 7,5 kW Spindle 1 RPM: 4500 1/min Spindle 2 power: 7,5 kW Spindle 2 RPM: 4500 1/min Distance between spindle noses: 600 mm Turret No.1 stations / rotary tools: 15/15 Power rotary tools turret 1: 2,7 kW RPM of rotary tools turret 1: 4000 1/min Turret No.2 stations / rotary tools: 15/15 Power rotary tools turret 2: 2,7 kW RPM of rotary tools turret 2: 4000 1/min Travel x/z turret 1: 250 / 300 mm Dwjdpfx Abey D Nxdezoa Travel x/z turret 2: 250 / 920 mm Bar capacity spindle 1: 51 mm Bar capacity spindle 2: 51 mm power chuck: 165 mm Spindle bore sp. 1: 62 mm Spindle bore sp. 2: 62 mm dimensions of the machine ca.: 3700 x 2300 x 3000 mm weight of the machine ca.: 5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 120 x 100 mm Doublegripper capacity 2 x 3 kg *

Condition: used, Year of construction: 2014, Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Accessories: Total enclosure Integrated loading system and tool magazine Automatic machining of up to 12 HSK 63 tools Program for erosion across the tool center at the cutting edge and for free erosion Hardware and software for DNC service Gripper fingers for workpiece automation SK40/HSK63-A,E/HSK63-B,F Adaptation to the A-axis on HSK63-A,E including 25 mm diameter test mandrel (HSK63 A,E system) Grinding mist extraction N 181 Cooling unit for dielectric fluid Automatic fire extinguishing system Measuring probes Dwodpfozguflox Abzja Machine lamp Automatic central lubrication Cutter outside diameter: Max. 250 mm Cutting length: Max. 260 mm Shank tool diameter: 10-250 mm Tool weight: Max. 20 kg traverse: X-axis 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm Rotation range A-axis: 360 ° tool holder: ISO 50 E-axis swivel range: 120 ° Dimensions machine: W x D x H = 2535 x 2200 x 2280 mm Weight: about 4500 kg Connected load: 4.5 kW (400 V / 50Hz) colour: telegrey RAL 7045/7047

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 04780000161, Sales location: Landgrafenstraße 45, 41069 Mönchengladbach Machine: Twin 500 Machine number: 04780000161 Year of manufacture: 2001 Siemens 840 D Main spindle: 45 kW, 3200 rpm, swing: 610 mm, spindle distance: 1850 mm Counter spindle: 45 kW, 320 rpm Travel ranges: Saddle 1 X-axis: 605 mm Y-axis: 210 mm B-axis: 240° Z-axis: 1470 mm Turning/milling spindle: 10 kW, HSK 63, 12000 rpm Saddle 2 X-axis: 267 mm Z-axis: 1440 mm Turret Saddle 3 Z-axis: 1460 mm Dwodpfxszn H Dvj Abzoa Tool magazine: 80 positions

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Dwsdoyr R A Espfx Abzja Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: used, Year of construction: 2009, operating hours: 28,600 h, functionality: fully functional, machine/vehicle number: 10915566124, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 15,000 rpm, overall weight: 7,800 kg, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 eVo 5-Axis Universal Machining Center Machine Brand: DMG MORI Model: DMU 50 eVo Linear Year: 2009 Control: Siemens Sinumerik 840D Technical Specifications * Machine Type: 5-Axis CNC Universal Machining Center * Simultaneous 5-Axis Machining * Travels (X / Y / Z): 500 × 450 × 400 mm * NC Swivel Rotary Table * Table Diameter: Ø630 mm * Maximum Table Load: 300 kg * B-Axis Swivel Range: -5° to +110° * C-Axis Rotation: 360° * Maximum Workpiece Diameter: Ø630 mm * Maximum Workpiece Height: 500 mm * Rapid Traverse (X / Y / Z): 24 m/min * Spindle Speed: 15,000 rpm * Spindle Taper: SK40 Dwjdpezl Rxxsfx Abzsa * Main Spindle Power: 19 kW * Maximum Torque: 130 Nm * Tool Magazine: 30 Positions * Maximum Tool Diameter: 80 mm (130 mm with adjacent pockets free) * Maximum Tool Length: 300 mm * Maximum Tool Weight: 8 kg * Direct-Drive Spindle * Roller Linear Guideways * Precision Ball Screw Drives * Digital AC Servo Drives * Automatic Tool Changer * Through-Spindle Coolant Preparation * Flood Coolant System * Central Automatic Lubrication System * Electronic Handwheel * Rigid Tapping * Helical Interpolation * High-Speed Machining (HSC) * Full Machine Enclosure * Machine Weight: Approx. 7,500 kg * Machine Dimensions (L × W × H): Approx. 2,600 × 2,400 × 2,900 mm

Condition: used, Year of construction: 2009, operating hours: 42,787 h, functionality: fully functional, machine/vehicle number: 10915566134, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 15,000 rpm, overall weight: 7,800 kg, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 eVo 5-Axis Universal Machining Center Machine Brand: DMG MORI Model: DMU 50 eVo Linear Year: 2009 Dwjdpfx Abszl Rvqszoa Control: Siemens Sinumerik 840D Technical Specifications * Machine Type: 5-Axis CNC Universal Machining Center * Simultaneous 5-Axis Machining * Travels (X / Y / Z): 500 × 450 × 400 mm * NC Swivel Rotary Table * Table Diameter: Ø630 mm * Maximum Table Load: 300 kg * B-Axis Swivel Range: -5° to +110° * C-Axis Rotation: 360° * Maximum Workpiece Diameter: Ø630 mm * Maximum Workpiece Height: 500 mm * Rapid Traverse (X / Y / Z): 24 m/min * Spindle Speed: 15,000 rpm * Spindle Taper: SK40 * Main Spindle Power: 19 kW * Maximum Torque: 130 Nm * Tool Magazine: 30 Positions * Maximum Tool Diameter: 80 mm (130 mm with adjacent pockets free) * Maximum Tool Length: 300 mm * Maximum Tool Weight: 8 kg * Direct-Drive Spindle * Roller Linear Guideways * Precision Ball Screw Drives * Digital AC Servo Drives * Automatic Tool Changer * Through-Spindle Coolant Preparation * Flood Coolant System * Central Automatic Lubrication System * Electronic Handwheel * Rigid Tapping * Helical Interpolation * High-Speed Machining (HSC) * Full Machine Enclosure * Machine Weight: Approx. 7,500 kg * Machine Dimensions (L × W × H): Approx. 2,600 × 2,400 × 2,900 mm

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Distance from spindle center to front of column: 730 mm Djdpfoztpmdjx Abzswa Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 21,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 1,185 mm, total height: 3,040 mm, total width: 4,100 mm, overall weight: 15,000 kg, controller manufacturer: HEIDENHAIN, controller model: Plus IT 3D CNC Pilot 4290 plus it, product length (max.): 7,800 mm, number of axes: 7, This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information. - Guide Way Type: Roller guide ways- Main Spindle: - Drive Power (100% ED): 21 kW - Drive Power (40% ED): 28 kW - Spindle Speed Range (100% ED): 5000 rpm - Spindle Speed Range (40% ED): 5000 rpm - Base Speed: 850 rpm - Torque max. (40/100% ED): 240 / 320 Nm - Drive Type: AC/1, Integrated Spindle Motor 76 - C-Axis Speed: 5000 rpm - C-Axis Torque: 320 Nm - C-Axis Resolution: 0.001 deg - Chuck Diameter: 200 - 315 mm - Bar Capacity max.: 65 mm - Spindle Flange: Flachflansch 170 h5 - Spindle Bore Diameter: 80 mm - Clamping Cylinder Bore Diameter: 67 mm - Diameter in Front Bearing: 120 mm- Tool Spindle / Milling Spindle: - Tool Holder: HSK63-A - Spindle Speed max.: 12000 rpm - Drive Power (100% / 40% ED): 13.2 / 22 kW - Torque (100% / 40% ED): 60 / 100 Nm- Spindle 2 (Counter Spindle - option): - Drive Power (100% / 40% ED): 21 / 28 kW - Speed max.: 5000 rpm - Chuck Diameter: 315 mm - Bar Capacity max.: 65 mm- Working Range / Turning Diameter: - Swing diameter max.: 640 mm - Turning diameter max.: 520 mm - Turning diameter over counter spindle max.: 400 mm - Turning diameter over counter spindle & turret max.: 250 mm - Turning diameter over tailstock max.: 400 mm - Spindle distance: 1500 mm - Turning length (short / long): 1175 mm - Workpiece weight chuck parts (flange weight) max.: 150 (100) kg - Workpiece center of gravity from spindle flange max.: 200 mm - Workpiece weight shaft parts with tailstock max.: 800 kg- Slide Travel: - Slide 1 (top): X1 = 550 mm, Y1 = 180 mm, Z1 (short/long) = 1185 mm, B1 = 240 deg - Slide 2 (option): X2 = 180 mm, Z2 (short/long) = 1050 mm - Slide 3 (counter spindle): Z3 (short/long) = 1150 mm- B-Axis: - Swivel speed max.: 30 rpm - Torque B-Axis (S6-40%/max.): 2860 / 5720 Nm - Resolution B-Axis: 0.001 deg - Clamping hydraulic (at 30 bar): 2000 Nm- Tool Magazine: - Number of tool pockets: 36 - Tool weight max.: 8 kg - Tool length max.: 400 / Ø80 mm - Tool length max. with free space: 250 / Ø125 mm - Tool diameter standard: Ø80 mm - Tool length max. without free space: 230 / Ø80 mm - Turning tool f-dimension standard: 40 mm - Turning tool f-dimension with free space max.: 62.5 mm - Tilting moment tool standard max.: 60 (100) kg/cm - Lifting movement: 85 mm- Turret 2 (Option): - Driven Tools Equipped: Yes - Number of tool stations: 12 - Shaft diameter acc. to DIN 69880: 40 mm - Number of driven tools: 12 - Drive power (max. 100% ED): 10.7 kW - Torque (max. 100% ED): 32 Nm - Speed range: 4000 rpm - Indexing time (30/180 deg.): 0.34 / 0.64 s - Tool load max.: 100 kg - Permissible imbalance due to tool loading: 63 Nm- Feed Drives & Rapid Traverse (Schlitten 1, 2, 3): - Rapid traverse X/Ys/Z (Slide 1): 40 / 24 / 70 m/min - Feed force X/Ys/Z (Slide 1, S6-40%): 7 / 11 / 7.5 kN - Travel resolution X/Ys/Z (Slide 1): 0.001 mm - Ball screw X (Slide 1): Ø32 x 20 mm - Ball screw Ys (Slide 1): Ø40 x 15 mm - Linear motor Z1-Axis: 1FN3600-4WB00 - Rapid traverse X/Z (Slide 2): 24 / 36 m/min - Feed force X/Z (Slide 2, S6-40%): 9 / 11 kN - Rapid traverse Z (Slide 3): 36 m/min - Feed force Z (Slide 3, S6-40%): 13 kN- Coolant & Chip Conveyor: - Coolant capacity: 370 l - Drive power: 0. Dwodpfx Aeyfv Rbjbzoa

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: 640M, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details. Dedpfey Ey N Nex Abzewa • Table size: 500 × 500 mm • Tool magazine capacity: 120 positionsCondition • Machine in working condition • Complete and fully operational • Sale due to reallocation of production assetsAvailability / Sale terms • EXW sale • Technical documentation available upon request • Available for commercial valuation • Possible technical inspection / site visit • Direct purchase negotiations possible Additional equipment • Pallet system: Palletech – 12 stations + 2 loading/unloading stations • Renishaw workpiece probe • Laser tool presetting • High-pressure coolant system: 18 bar • Belt-type chip conveyor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 100 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 800 mm, total height: 1,800 mm, overall weight: 2,200 kg, controller manufacturer: FANUC, controller model: 31i B, number of axes: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Additional equipment • Automatic bar loading magazine with adjustable part length and bar diameter • Remnant extraction system • Guide channel made of polyurethane plastic • Displacement system for longitudinal movement Machine Benefits Qualitative Machine Benefits • No spindle reduction required Technical Machine Benefits • Cooling: thermocompensation system • Axes: c-axis and y-axis • System: linear guide system, digital drive system • CATCHING DEVICE Pneumatically operated precast catching device for the gentle unloading of precast elements. The precast elements are transported into a catching box (standard) or onto a conveyor belt (optional). Max. precast element length: 175 mm Max. precast element diameter: 65 mm Max. • Tool system: 12-position tool turret, vdi30 radial • Driven tools: up to 12 driven tools • Sub-spindle speed range: 0–7000 rpm • Bar length capacity: 1200 – 3200 mm • Diameter passage: 20 – 65 mm • Feed speed: 0 – 627 mm/sec • Turning length is 650mm Extra Information Control Unit Control: Integrated PLC Features: Fully automatic work cycle, Monitoring and error diagnostics (display output) Tools Max Power: 6.7 kW Max Torque: 25 Nm Speed Range: 0–5000 rpm C-Axis: Available Media Power Supply: 200/220/400 V AC Air Requirements: Min. 7 bar Air Consumption: 45 L/min Mount Position (Assembly) Installation Kit includes vibration-absorbing, height-adjustable leveling shoes, and mounting brackets. Machine History Note: Machine like new with only 100 hours of use Dedpex D H Sfefx Abzowa Dimensions Machine Depth 4500 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,148 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 650 mm, spindle motor power: 37,000 W, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, positioning accuracy: 0.008 mm, tool weight: 20,000 g, number of slots in tool magazine: 48, number of axes: 5, This 5-axis LICON LiFLEX II 766 i3 DT B22 was manufactured in 2016. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 96 tools. The machine is equipped with advanced i³ technology, allowing independent control of the X, Y, and Z axes for both spindles. If you are looking to get high-quality machining capabilities, consider the LICON LiFLEX II 766 i3 DT B22 horizontal turning machine we have for sale. Contact us for further details. Technical Data • Machine Type: Twin-Spindle Horizontal Machining Center • Control Unit: Siemens SINUMERIK 840D sl • Operator Panel: Siemens OP15T with integrated TCU • ECO Mode • Remote Diagnostics (eWON Router) • PROFIBUS Interface for Automatic Workpiece Loading • Signal Tower (3-color LED) Travels • X-Axis Travel: 750 mm • Y-Axis Travel: 660 mm • Z1-Axis Travel: 650 mm • Z2-Axis Travel: 650 mm Rapid Traverse • X-Axis: 60 m/min • Y-Axis: 60 m/min • Z1/Z2 Axes: 90 m/min Axis Performance • X-Axis Acceleration: 6 m/s² • Y-Axis Acceleration: 6 m/s² • Z1/Z2 Axis Acceleration: 9 m/s² • Feed Force X: 15,000 N • Feed Force Y: 15,000 N • Feed Force Z1/Z2: 10,000 N • Positioning Accuracy: 8 µm Spindle • Number of Spindles: 2 • Precision Motor Spindles • Tool Holder: HSK-A63 (DIN 69893-1) • Spindle Speed: 12,000 rpm • Spindle Power: 37 kW (40% ED) • Spindle Torque: 85 Nm (40% ED) • Maximum Torque: 100 Nm • Direct Drive Axes / Swivel System • 2 NC B-Axes • 2 NC Rotary Axes (A-Axes) • Swivel Range: 0°–180° • Swivel Time (0°–180°): approx. 5 s Technology • Independent X, Y and Z Axes for both Spindles • Separate Direct Measuring System for each Axis • Independent Z-Axis Correction Range: 5 mm Tool Magazine • 96 Tool Stations (2 × 48) • Maximum Tool Length: 400 mm • Maximum Tool Diameter (Adjacent Pockets Occupied): 80 mm • Maximum Tool Diameter (Adjacent Pockets Free): 250 mm • Maximum Tool Weight: 20 kg Lubrication • Automatic Central Lubrication • 5-Channel Media Transfer (Oil or Air) Cooling / Coolant • 70 bar Through-Spindle Coolant • Coolant Tank Capacity: 2,300 l • Coolant Flow Rate: 400 l/min • High-Pressure Pump: 15 kW • Automatic Coolant Refill • Coolant Cleaning System • Water Cooling • Cooling Water Temperature: 22 °C • Cooling Water Flow Rate: 800 l/h Chip Management • Scraper-Type Chip Conveyor • Chip Conveyor Discharge Height: < 1,150 mm • Dry Machining Ready • MMS (Minimum Quantity Lubrication) Compatible Electrical Data • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V DC • Connected Load: 150 kW Additional Features • Automatic Workpiece Loading Interface Dedpfszqr Skjx Abzewa • Automatic Tool Changer • Closed Machine Enclosure • Machine Lighting • Pneumatic Equipment • Energy Monitoring System • Automatic Media Connections • Modular Machine Design Additional Information • Motor Spindle 11 replaced in Week 19/2024 • Motor Spindle 12 replaced in Week 24/2023 Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 4,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,400 mm, overall weight: 27,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 28,000 W, product length (max.): 10,200 mm, number of axes: 3, This 3-axis STAMA MC 546/S was manufactured in 2001. It features a powerful main spindle motor with a maximum speed of 6,000 RPM and a torque of 840 Nm. The machine is equipped with Siemens control and motors for precise operation. If you are looking to get high-quality machining capabilities, consider the STAMA MC 546/S vertical machining centre we have for sale. Contact us for further details. - Throat Depth: 890 mm- Table to Spindle Nose Min.: 450 mm- Table to Spindle Nose Max.: 1200 mm- Max. Workpiece Weight: 15 kg- Table Clamping Surface Length: 4500 mm- Table Clamping Surface Width: 840 mm- T-Slots: 2 (22 DIN 650)- Slot Width: 22H12/H7- Slot Distance: 700 mm- Table Height Above Floor: 890 mm- Required Floor Area (L x W x H): 10.2 m x 6.4 m x 4.0 m- Total Weight: 27,400 kg- Connected Load: 50 kVA- Total Power Requirement: 50 kW- Voltage: 400 V (3~, 50 Hz)- Rated Current: 80 A- Spindle Bearing Diameter: 95 mm- Tool Taper / Holder: SK50- Max. Torque: 840 Nm with gear ratio i=4 (at 40% ED)- Spindle Speed Range: 36 - 6000 rpm- Tool Magazine Capacity: 60 tools- Tool Clamping Force: 20,000 N- Max. Tool Diameter: 180 mm- Max. Tool Length: 400 mm- Feed Rates (X, Y, Z): 1 - 10,000 mm/min- Rapid Traverse Rates (X / Y / Z): 30 m/min / 30 m/min / 22 m/min- Max. Feed Force (X / Y / Z): 12,000 N / 12,000 N / 18,000 N- Max. Milling Capacity: 1,000 cm³- Max. Drilling Diameter: 90 mm- Max. Tapping Diameter: M40- Included features: Weekend switch-off circuit; internal lighting- Not included: Clamping table; vices Technical Specification Dwedpfx Aboy Nk T Tjzea Taper Size SK 50

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With Heidenhain iTNC 530 path control Year of manufacture: 2005 Travel distances: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm stepless (HSK 63) With the following accessories: Rigid angle table, 1250 mm x 700 mm clamping surface 3D measuring probe Heidenhain Tool measurement in the working area via BLUM Laser Vertical tool changer with 32 magazine slots (HSK 63) Full protection enclosure with sliding doors and internal lighting Electronic handwheel Operating modes 3 + 4 Chip conveyor Coolant system 3 height-adjustable machine mounts Spindle oil cooler Control cabinet cooling unit (Rittal) Dedpfx Aoy A Sf Rebzjwa Operating manuals

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Djdsviq U Eopfx Abzowa Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Dodpszilp Tjfx Abzowa Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine CAT Tooling 4th Axis Swarf Conveyor Mazak Tool length measuring unit Spindle thru coolant UK Buyers - Price £42,000 +VAT Carriage/delivery is additional

Condition: used, Makatrol Smart Control Serial Number 254702 YOM 2014 EIA & Mazatrol Programming Full Factory 4th Axis 30 Tool Magazine CAT Tooling USB Ports No swarf conveyor or thru coolant UK Buyers - Price £39,000 +VAT Dwedpfezilpmox Abzea Carriage/delivery is additional

Condition: used, Year of construction: 2014, Mazatrol Smart Control Serial Number 249154 30 Tool Magazine EIA & Mazatrol Programming USB Ports No swarf conveyor No thru coolant Dodpfx Aszillhebzswa UK Buyers - Price £32,000 +VAT Carriage/delivery is additional

Condition: used, maximum load weight: 35,480 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment: Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, neck height at the front approx. 130 mm. Coupling device: 2-inch kingpin. Underrun protection: bolted design, according to EC. Side underrun protection: according to EC, made of aluminum profiles, anodized. Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side. Axles: 3 x 9 t air suspension axle unit, disc brakes 22.5". Total stroke approx. 180 mm, raising and lowering device via rotary slide valve. Braking system: Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit. Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice. Tire pressure monitoring system (TPMS) via CAN bus system of the EBS. Fenders: according to EC. Spare wheel holder: none. Load securing: - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t - In the outer frame, holes for attaching lashing straps are provided every approx. 400-600 mm. Front wall: Reinforced steel construction, fixed, approx. 1,400 mm high. Internally lined with approx. 9 mm screen-printed material (approx. 1,250 mm high). Floor: approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles. Lighting system: according to EC, 24 Volt, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. Lane departure warning lights LED. 1x15- and 2x7-pole plug connections on the front crossmember. Equipment: - 2 wheel chocks with holder - Warning signs ECE 70 - Holder for rotating beacon, incl. rotating beacon - 2 rubber impact buffers at the rear - Access ladder at the rear right, foldable and extendable (without platform) - 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles. Painting: Front wall: RAL 3002 carmine red. Chassis: hot-dip galvanized. Outer frame: hot-dip galvanized + RAL 3002 carmine red. Center beams: RAL 3002 carmine red. SSV: Aluminum, anodized. Underrun protection: white (RAL 9016 traffic white). Components: galvanized/KTL black. Rims: silver. Outline marking: complete, yellow. Incl. special accessories. First axle liftable, with fully automatic, load-dependent lift control. 10 pairs of stake pockets in the outer frame, evenly distributed. 4 rows of stake pockets transverse to the loading area. 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm. Inside the front wall, a magazine for 20 stakes. 5 x 25-mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes. Side board and stake magazine: under the chassis, left and right, sliding rails for side boards and stakes. Container locks for 1 x 40' and 2 x 20' containers, rear-flush. Container locks for 1 x 20' container in the center. Work lights on the lamp carrier (switched via reverse gear). 2 Dwodpfxezrq U Hj Abzja

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, total height: 2,372 mm, total width: 1,731 mm, total length: 1,000 mm, table width: 630 mm, quill stroke: 250 mm, table length: 400 mm, workpiece length (max.): 800 mm, workpiece width (max.): 500 mm, workpiece height (max.): 265 mm, GF AgieCharmilles FORM 20 Year of manufacture: 2008 Travel paths: X=350 mm, Y=250 mm, Z=250 mm Max. workpiece size: X=800 mm, Y=500 mm, Z=265 mm Max. workpiece weight: 200 kg Max. electrode weight: 50 kg Distance table – chuck: 230 - 480 mm APG FORM Generator – working current: 72 Amperes Best achievable surface finish: Ra 0.2 µm Including pneumatic chuck Erowa ITS 50 Including 4-position electrode changer in magazine Machine weight (net): 2000 kg Machine dimensions (L x W x H): 1300 x 1850 x 2500 mm The machine will be cleaned, serviced, and subsequently tested after your order is received. Dsdpfszrut Tex Abzewa We are happy to commission the machine for you as well.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,802 h, spindle speed (max.): 10,000 rpm, total height: 4,500 mm, total width: 10,500 mm, overall weight: 41,500 kg, table width: 1,000 mm, table length: 1,250 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, product length (max.): 10,500 mm, table load: 3,000 kg, number of axes: 5, This 5-axis DECKEL MAHO DMC 160 U Hi-Dyn was manufactured in 2002. It features an impressive X-axis travel of 1600 mm, Y-axis travel of 1250 mm, and Z-axis travel of 1000 mm. The machine includes a tool changer capacity of 60 slots and a maximum load of 3000 kg on the pallet table. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 160 U Hi-Dyn universal machining centre we have for sale. Contact us for further details. Dsdpfx Abszqcz Nszowa - Tool Changer Capacity: 60 slots in rack magazine- Gripper Type: Double gripper- Operating Hours: 78,814 hours (as of 11/2024)- Program Run Hours: 20,802 hours (as of 11/2024)- Spindle Hours: 21,295 hours- Enclosure: Full protection cabin- Internal Coolant Supply (IKZ): 40 bar through spindle center (theoretical pump capacity)- Air Blast: Through spindle center, retrofitted (Original DMG)- Chip Conveyor: Scraper belt conveyor- Coolant Tank Capacity: 900 liters- Pallet Changer: Duo-Block pallet changer with 2 pallets- Pallet Table Surface: 1250 x 1000 mm- Clamping Grid: 100 x 100 mm, M20 thread- Milling Head: Universal milling head with controlled B-axis for 5-axis positioning and simultaneous machining- Universal Touch Probe: Heidenhain TS642- Calibration Kit: 3D Quick-Set in case- Operating Mode: Mode 4 capable- Cleaning Equipment: Wash-down gun with pump Technical Specification Taper Size SK 50 Through-spindle Coolant Yes