Used Machine Center for sale (68,252)

Condition: good (used), Year of construction: 2015, Traverses X Y Z; 630 x 560 x 510mm, A axis -125/+ 10 degrees, C axis 0.001 degrees, table size 300mm diameter, Maximum diameter 520mm, Gjdpfx Afoyfv Dhonsin maximum workpiece height 350mm, spindle taper BT40, 90 station ATC, spindle speed 20,000rpm, Fanuc G-Tech 31I control, through spindle coolant and swarf conveyor, spindle probe.

Condition: excellent (used), Year of construction: 2014, mega Design Solutions UK LTD Use and recommend Haas machines. HAAS TM3P 3AXIS MACHINING CENTER LARGE CAPACITY Godpfx Afjyhhgmjnoin Outstanding condition very little used complete with 8 BT40 tools as shown Good tooling package Travels X 1016MM Y 508MM Z 406 MM We can help with setup and training if required.

Condition: used, Year of construction: 2013, Kitamura Mycentre HX400G Horizontal Twin Pallet Machining Centre with Arumatik-Mi CNC Control, Table Size 400 x 400mm, Max Pallet Load 350kgs, Travel X/Y/Z=610/610/610mm, 50 Tool ATC, Spindle Taper NST No.40, Spindle Speed 15000rpm, Full B-Axis at 0.001 deg, Max Workpiece Size 630 x 745mm, 15 Bar Through Spindle Coolant, Coolant Tank, Swarf Conveyor, Qty of Spindle Tooling as Lotted, Machine Weight 13,800kgs, Dimensions (L x W x H) 4000 x 3100 x 2700mm. S/No. 44140 (2013) Gjdpsyhdiwofx Afnsin Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), New 2006 Brother CNC-B00 Control Giedperfxr Uefx Afnsn Pallet Change time 3.4 seconds Pallet Size 600 x 425mm X axis 550mm Y axis 400mm Z axis 415mm Spindle speed 12000rpm 40 Station ATC BT30

Condition: used, YOM 2004 Mazatrol PC Fusion 640 M Axis X 1660 mm Axis Y 510 mm Godpfsv Ax Uyex Afnsin Axis Z 510 mm Table length 2000 mm Table width 510 mm Max. part weight 1000 kg Number of tool pockets 30 Spindle taper CAT 40 Max. spindle speed 10000 rpm Spindle motor power 18.5 kW

Condition: excellent (used), Year of construction: 2019, operating hours: 4,101 h, functionality: fully functional, machine/vehicle number: 1159962, Equipment: chip conveyor, HAAS VF 5 SS VERTICAL MACHINING CENTRE YEAR 2019 SPINDLE SPRRED 12,000 RPM Godpjw N Nw Ajfx Afnoin TRAVELS - X AXIS - 1270 MM Y AXIS - 660 MM Z AXIS - 635 MM TABLE SIZE 1321 X 584 MM THROUGH SPINDLE COOLANT HIGH SPEED MACHINING 40 TAPER RIGIT TAP 30 ATC 4TH AXIS ENABLED SWARF AUGER HOURS IS ON THE PHOTOS

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Hand Wheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Gisdpfx Aoygct Ejfnjn Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79020 Serial No: VKC064 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, FOR SALE 5-AXIS Machining Centre Model: DMG SAUER ULTRASONIC 20 LINEAR Year: 2011 Configuration: Complete machine with robot To complete the technical file, could you please specify the following characteristics: - Table capacity / Axis travel (X × Y × Z): [e.g., 800 × 500 × 500 mm] - Payload / Max. table load: [e.g., 1,200 kg] - Accepted raw workpiece dimensions: [e.g., Ø 500 mm / 700 × 500 mm] - Spindle power / Torque: [e.g., 18 kW, 200 Nm] - Robot capacity (Payload / Reach): [e.g., 10 kg, reach 1,200 mm] - Ultrasonic machining capability: [Amplitude, frequency, compatible tools] SIEMENS CNC Gsdpfxeyi Tpij Afnjin Awaiting your response, I remain at your disposal for any further information.

Condition: refurbished (used), Year of construction: 2007, CNC FANUC EZ, travels X axis 4200 mm, Y axis 1400 mm, Z axis 585 mm, A axis ±40 degrees, B axis ±40 degrees, table 4000 x 1250 mm, spindle 10,000 rpm HSK 100, power 27 kW, tool magazine for 60 tools. Machine can be viewed in operation and is available immediately. Godpfx Afsyh Hcqenein

Condition: excellent (used), Year of construction: 2006, Cincinnati MAG MEGA 5 (XT) HPC-800HP 5 Axis CNC Horizontal Machining Centre With Siemens 840D Control Cincinnati MEGA 5-800 5 Axis Horizontal Machining Centre Utilises The Basic MEGA Twin Ball Screw-Driven Axes Configuration In 'X'=1,425mm - 'Y'=1,350mm & 'Z'=1,265mm, MEGA 'B'-Axis Table 360,000 Positions In 0.001˚ Increments, Compact 'A'-Axis Tilt Spindle With +60˚ to - 120˚. Max Component Dimension ⌀1,300mm x 2,000mm High. Work Surface Table Dimension Square 800mm x 800mm, Rectangular 800mm x 1,000mm (5 'T' Slots). Maximum Spindle Speed 15,000rpm. Maximum Table Load 2,200kg. Rapid Traverse 60m/min. Acceleration/Deceleration Rate Of 1G. Maximum Tool ⌀125mm (⌀300mm Non Adjacent), Maximum Tool Length 690mm, Maximum Tool Weight 30kg. S/No.MH00B01050001 (2006). Gjdpsydmnzefx Afnein With Renishaw Probe Interface, Siemens Electronic Handwheel, Barnes Chip Conveyor, ICS Chiller, Chip Blaster High Pressure Coolant System, Donaldson Torit Extraction Unit & Large Quantity Of HSK Tooling Included. Approx Overall Dimensions W6,400 x D5,000 x H2,800mm.

Condition: excellent (used), Year of construction: 2006, Haas TM 2 TRAVELS X 1016MM Y 406 MM Z 406MM Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM2 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. Gijdpfoyftdfjx Afnen We use the machine for occasional toolmaking so we can demonstrate if required.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Haas TM1 4 K SPINDLE TRAVELS X 762 MM Y 305 MM Z 406MM This machine has the option to run on 240v single phase 2003 machine in good condition Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM1 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. Gisdpfxoyfn Ils Afnon This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required. The machine is 2.7m high with the head up and 2.2 with it down.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC640, spindle speed (max.): 10,000 rpm, We offer in good condition with around 2.500 spindle hours Posmill CE1000 with following options: Heidenhain linear scales in X, Y and Z-axis Gisdpfx Aeyindajfnjn Heidenhain TNC 640 control Air true spindel Spindel 10.000 RPM ISO40 Tool changer 40 tools ATC Internal coolant 20 bar Hexagon Touch probe Chip conveyor Thermal spindel compensation Z-axis Technical specification:" X-Axis Travel: 1060 mm Y-Axis Travel: 600 mm Z-Axis Travel: 600 mm

Condition: excellent (used), Year of construction: 2017, Excellent Condition Table Diameter - 320mm Max Workpiece size - 400 x 300mm Table loading capacity - 200kg T-slot size - 12 x 90 Travel X/Y/Z - 400/650/485mm Distance from spindle nose to table top - 0-485mm A axis travel (rotate along with X axis) +30 degree C Axis travel (rotate along with Z axis) 360 degree Spindle Spindle speed - Direct drive 12,000rpm Spindle taper - BT40 Spindle motor (cont./30min) - 11/15kW Spindle max. torque (cont./30min) - 70/95Nm Feedrate Linear guideway on X/Y/Z axis - Ball way 35/45/45 mm Rapid Traverse rate on X/Y/Z axis - 36,000 / 24,000 / 10,000mm/min Rapid traverse rate on A/C axis - 20/27rpm Cutting feedrate - 10,000mm/min Tool Magazine Tool Magazine - 24 pocket Max tool diameter / adjacent pocket empty - 80mm Max tool length - 300mm Max tool weight - 8kg Space requirement & weight Machine length x width 2950 x 2350mm Machine height 3140mm Machine weight 7200kg CNC Control - Fanuc 0MP Miscellaneous Pneumatic requirement - 6kg/cm power requirement - 40KVA Giodpfsxmhbaex Afnsn coolant tank capacity - 400ltr

Condition: used, Year of construction: 2001, FANUC ROBO DRILL T14 iC COMPACT MACHINING CENTER 14 Tool tool changer Gjdpfxoydvp Us Afnoin 5 off BT30 tools

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Gedpfxsydil Ns Afnein Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: used, Year of construction: 1998, Bridgeport VMC 600/22 Digital CNC Milling Machine with Heidenhain TNC 410PA CNC Control, 830 x 410mm Work Area/Bed, 22 Position ATC, BT40 Spindle Taper. S/No. 821424 (1998) Machine Weight 2500kg. Country of Origin: United Kingdom Godpfjyfgcbjx Afnoin Location: These lots are located in York, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller model: HEIDENHAIN TNC 530, table width: 540 mm, table length: 1,120 mm, spindle speed (max.): 8,000 rpm, Model: GX-1000 Year: 2008 Gijdpsx Swyrsfx Afnon S/No.: NVC A8 BOO22 Control: Heidenhain TNC 530 Table Area: 1120 x 540mm X Axis: 1020mm Y Axis: 540mm Z Axis: 540mm Spindle Taper: BT40 Spindle Speed: 8000 RPM 20 Station Tool Changer Motor: 21KW Machine With: Nikken 4rth Axis Swarf Conveyor Selection Of Tooling

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, For sale 1 machining center Hartford LG 800S Year 2007 3 axes Gisdpfxjxvz Tne Afnen Fanuc A1100 Machining Capacities Axis travels X/Y/Z: 800 mm (X-axis) x 510 mm (Y-axis) x 630 mm (Z-axis) Table dimensions: 950 mm x 510 mm Maximum workpiece weight: 500 kg Spindle speed: Typically 8,000 rpm, optionally 10,000 rpm Spindle taper: BT40 (or ISO 40) Tool magazine (ATC): 24-position automatic tool changer Machine weight: Approx. 5,800 kg BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Feed rates m/min: 80/50/50 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø500x380 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Oil skimmer Giodpfjyi Dniox Afnjn Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Tool changer: 60 positions Accessories: Giodpfx Aox Dlf Refnjn Chip conveyor High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe

Condition: used, Year of construction: 2005, Technical details: x-travel: 2200 mm y-travel: 2200 mm z-travel: 1400 mm spindle taper ISO: 50 spindle diameter in front bearing: 110 mm spindle turning speed range: 45 - 6000 U/min pallet table size: 1000 x 1250 mm pallet worktable capacity: 6000 kg feed range: 1 - 60000 rapid traverse: 60 m/min spindle drive motor: 27 kW dimensions of the machine ca.: 15 x 8,5 x 5,7 m total power requirement: 133 kVA weight of the machine ca.: 50 t Machine with SIEMENS 840 D control - full B-axis - palette changer for 3 palettes - tool changer for 244 tools Gisdpfx Ajvgmitefnsn - coolant through spindle - max. workpiece swing 2200 mm *

Condition: excellent (used), Year of construction: 2013, Technology Inline direct drive Speed 12,000 rpm Power 22 kW Tool holder SK40 Tool changer SMTC, 41 positions Technology 2 axes, with counter bearing B axis -35° / +110° C axis 360° Clamping surface ø630 x 500 mm Table load (max.) 300 kg Cooling Standard coolant incl. P-Cool and through-spindle internal cooling (TSC) Renishaw probe WIPS system with part and tool measurement probe 8M functions Rotation and scaling 16MB memory storage Gijdpfsyimncsx Afnon HSM high-speed milling Rigid tapping Machine hours cycle time: 5,446 h Machine on-time: 21,246 h

Condition: good (used), Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MB56VA 3-axis vertical machining center U100M ATC 32 SK40 Main spindle 12,000 rpm Oil mist extraction system Godpfx Asyiu D Iefnsin Cutting time 9,675 h Chip conveyor Coolant system *optionally, a large selection of SK40 tools matching the machine

Condition: like new (used), Year of construction: 2009, operating hours: 25,546 h, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 1,000 kg, total height: 3,200 mm, total length: 3,200 mm, total width: 3,100 mm, table width: 1,000 mm, table height: 800 mm, table length: 1,000 mm, overall weight: 24,450 kg, spindle speed (min.): 16,000 rpm, spindle motor power: 28,000 W, Year of construction: 2009 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1500 Y-axis travel mm: 800 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001º) A-axis degrees: 0º/-90º B-axis degrees: ±90(0.001º) Rapid traverse m/min: 30 Worktable Number of pallets: 4 Table dimensions mm: Ø1000x800 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 16000 Spindle drive power kW: 28(100%ED) Spindle torque Nm: 84/63 (40/100%ED) Tool system Tool holder: HSK-A 63 Tool magazine slots: 208 With free neighboring places mm: 140 With occupied neighboring places mm: 80 Max. Tool Length mm: 330 Max tool weight kg: 10 Chip-to-chip time s: 7 Equipment Chip conveyor Signal lamp Tool measuring arm Gsdpfxeyiarbj Afnjin Bar loader Chuck foot switch (double) for main and counter spindle Driven tools included Machine running times Under power: 25546 Rated power kVA: 54 Basic machine dimensions / weight Length mm: 3200 Width mm: 3100 Height mm: 3200 Weight kg: 24450