Used Machine Center for sale (87,647)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 24 kW (32.63 HP), pressure (max.): 120 bar, TECHNICAL DETAILS Minimum dimensions for double-sided machining: Diameter 12 mm, Length 200 mm Maximum dimensions for double-sided machining: Diameter 50 mm, Length 800 mm Rjdpfx Aasxxkd Ie Eock Minimum dimensions for single-sided machining: Diameter 12 mm, Length 75 mm Maximum dimensions for single-sided machining: Diameter 70 mm, Length 500 mm Cutter diameter: max. 140 mm Tool holder: SK40 Workpiece clamping: Hydraulic centering vice MACHINE DETAILS Performance Data Power: 24 kW Voltage: 400 V Frequency: 50 Hz Max. pressure: max. 120 bar EQUIPMENT Horizontal end machining center Simultaneous double-sided end machining of shaft-shaped parts

Condition: excellent (used), AGATHON 150 SL2 Centerless cylindrical grinding machine TECHNICAL DATA Working wheel: Diameter: 150 mm width: 50 mm Bore: 50 mm Regulating disk: Diameter: 100 mm Width: 50 mm Bore: 40 mm Workpiece diameter: Minimum: 0.1 mm Maximum: 12 mm Max. Length for plunge-cut grinding: 49 mm Weight: 750 kg Connected loads: 3 X 380 V / 50 Hz Compressed air: 5-6 bar Dimensions: Machine: 1000 x 500 x 880 mm Electrical cabinet: 1550 x 540 x 420 mm Coolant tank: 750 x 550 x 700 SCOPE OF OFFER U.A: (list not exhaustive): Grinding wheels regulating wheels Rcedpsr Hdi Aefx Aa Esk Spare flange mandrel Grinding pads Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided.

Condition: used, Year of construction: 1996, Technical details: grinding diameter: 1,5 - 75 mm grinding wheel diameter: 400 mm grinding wheel width: 160 mm work stroke: 0 - 1 mm working feed: stufenlos/ continous mm/min grinding wheel speeds: 1300 U/min control for program: Num 1020 GC total power requirement: 14 kW weight of the machine ca.: 3,8 t dimensions of machine: 3,0x2,2x2,2 m dimensions electric cabinet LxWxH: 1,5x0,4x2,0 m CIRCULAR GRINDING MACHINE - alloyed round steels as well as (grooving process) throughfeed process. - In the plunge process, the plunge-cut length is max. 160mm. Redpfsu Ngyzox Aa Eeck - Workpiece removal automatically via rail (its function or operation is not known to WMW AG) - grinding wheel with reshaping device, speed = 1300 rpm. - regulating grinding wheel with reshaping device, infeed angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system accessories: various grinding and regulating wheels on request The machine is operating in manual mode! The control is in the Catalan language and none of our employees can control the machine or understand the language. *

Condition: excellent (used), grinding wheel diameter: 508 mm, grinding length: 3,500 mm, overall weight: 8,000 kg, power of the servo motor: 42,000 W, year of last overhaul: 2010, Equipment: rotational speed infinitely variable, We are selling our own Lidköing 4B centerless grinding machine with circulation station from our subsidiary in Slovakia. The machine is powered and can be inspected. The circulation station is suitable for shafts up to a length of approx. 3,000 mm. This means that shafts with multiple grindings can be continuously finished. The coolant system has a cooling system for tempering the coolant. The Lidköping 4b grinding machine has an adjustable grinding and regulating wheel. The machine is from 1970 and was completely overhauled technically and electrically at Markmetall in 2010. The grinding machine was rebuilt in 2018 with a newly built circulation station from SH attachments/Markmetall. Since then, the machine can be operated as an automatic centerless grinding machine. Extensive documents are available. Rcjdpfx Aevuq Hxsa Esk

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 30013011, 27.10 25: The machine is running in series production. Shutdown planned for mid-2026. Used grinding machine, model year 2008, for plunge grinding, including base tray and part loading via gantry loader (Theilinger Automation). There are two used machines available for sale. ----- Please provide your offer price and desired quantity. Sale only within Europe (EU), including Turkey, the United Kingdom, and Switzerland. ----- Rodpfx Aajth Rzae Esck Technical specifications can be found in the handout. Without packaging; all warranty rights are excluded. If you wish to dismantle the equipment yourself, please indicate this in your bid. We do not guarantee the accuracy of the technical data, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements stipulated in the accident prevention regulations.

Condition: good (used), Year of construction: 2013, E.Büker - Type N76 End Finishing Machine / Beveling Machine Rcjdpsxnlnmjfx Aa Ejk - Working range: 6 - 76 mm - Speed: 10-1800 rpm - Power: 0.75 kW - Base frame - Emergency stop Dimensions: LxWxH 0.7x0.5x1.4 meters / Weight 250 kg Errors and input mistakes excepted

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U Rjdpfx Aasvp Sd Ie Eock - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Year of construction: 2005, condition: ready for operation (used), A centerless round and polishing belt grinding machine Loeser (RPS 376/2+2), retrofitted in 2024, is available. Stations grinding/polishing: 2/2, grinding range: 10mm-120mm, belt dimensions X/Y: 3000mm/200mm, feed rate: 15m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Rcjdpsxhnr Iefx Aa Ejk

Condition: used, Year of construction: 1996, functionality: unexamined, machine/vehicle number: 05.0-41740, grinding diameter: 650 mm, grinding length: 600 mm, workpiece diameter (max.): 300 mm, input voltage: 400 V, Centreless external cylindrical / plunge grinding machines Herminghausen Mikrosa SR 5 Inspection possible at any time! Operating voltage: 400 volts, power consumption: 88 kW, Workpiece diameter: 5 - 300 mm, Rcedsxl T Hlepfx Aa Ejk Maximum plunge grinding length: 600 mm, Grinding wheel diameter min/max: 480/650 mm, Grinding wheel bore: 304.8 mm, Regulating wheel diameter min/max: 270/350 mm, Regulating wheel bore: 152.4 mm, Grinding wheel peripheral speed: 40 m/s, max. 63 m/s with cover, Regulating spindle speed steplessly adjustable: 0 - 250 rpm, Control: Siemens S820, Machine weight approx. 15,500 kg

Year of construction: 1996, condition: good (used), functionality: fully functional, machine/vehicle number: 009005005, TECHNICAL DETAILS working range: 2 - 200 mm bar length: 500 mm dressing speed: 500 rpm control: Siemens 840 C control wheel width: 400 mm control wheel bore: 152 mm regulating wheel diameter: 350 mm control wheel speed: 10-150 rpm Control wheel drive: 11,3 kW Rodslmm Evepfx Aa Eock grinding wheel width: max. 400 mm grinding wheel diameter: max. 660 mm grinding wheel bore diameter: 304.8 mm grinding wheel speed: 63 m/s Grinding wheel drive: 45 kW MACHINE DETAILS weight: 10 t Connection: 400 V / 50 Hz / 3 phases Rated power: 115 kW

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 30013012, 27.10 25: Machine currently in serial production. Shutdown planned for mid-2026. Please state your offer price. Sale only within Europe, including Turkey. ----- For technical data, see handout. Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please indicate this in your bid. Rsdpfx Asth Sc Hea Eock We do not assume any liability for the accuracy of the technical data, the completeness of accessories and tool equipment, nor for compliance with all safety and environmental protection requirements as specified in accident prevention regulations.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 5028, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, grinding diameter: 125 mm, workpiece diameter (max.): 125 mm, Refurbished Herminghausen SR4 - overhaul was carried out in 2008 by the company SFS Werkzeugmaschinen GmbH, 63165 Mühlheim a. M. The machine can be used for plunge grinding or through-feed grinding. The machine was in use at Daimler-Benz, Gaggenau from October 2008 - 2017. It was regularly serviced and is in good condition. The machine was then taken over by us, but unfortunately was never used due to lack of use. The machine was always stored dry and well. Rcodov H A Edepfx Aa Esk Accessories: Through-feed workpiece support holder Pinion wrench

Condition: used, Year of construction: 2002, Centerless Grinding Machine BOCCA MALANDRONE R 80/200 CNC GENERAL CHARACTERISTICS: Redpfx Aohzvkdea Esck Grinding Wheel Dimensions: Ø610xØ304,8x300 mm Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

Condition: good (used), Centering Machine - KUHN KAZ 80-2 - Max. workpiece diameter / round: 80 mm - Max. workpiece diameter / square: 60 mm - Centering length: endless - Clamping unit with self-centering vise - Spindle drive: 1.8 kW - Drill chuck - Chip tray - Power cable - Forklift slots for transport Dimensions: Rcedpfxjxcmhwj Aa Esk LxWxH 1.7x0.7x1.4 meters / Weight 600 kg Subject to errors and input mistakes.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Suitable for facing, internal and external chamfering - machine in very good condition and with lots of accessories! Rsdpfx Aevpgtqsa Ejck TECHNICAL DETAILS Workpiece diameter: 25 - 80 mm Workpiece length: 50 - 1,200 mm Workpiece weight (max.): 12 kg Control: Siemens PLC Tool holder: HSK 63C Spindle speed: 350 - 12,000 rpm Working height: 1,000 mm Axial movement of the milling spindle (automatic/manual, max.): 300 mm MACHINE DETAILS Total power requirement: 26 kW Machine weight: approx. 6.8 t Space requirement: approx. 7.7 m x 2.9 m x 2.1 m EQUIPMENT - 1 workstation - 2 spindle units. - Feed belt - Discharge belt - Fully automatic process flow

Year of construction: 1994, condition: good (used), functionality: fully functional, machine/vehicle number: 073000312, TECHNICAL DETAILS grinding diameter: max. 200 mm regulating wheel width: 400 mm grinding wheel width: max. 400 mm Control name: Siemens 840 C Profile depth: max. 15 mm Gr. workpiece length plunge grinding: 500 mm drive grinding spindle: 50 kW regulating wheel speed: 10 - 150 1/min regulating wheel drive: 3 kW regulating wheel inclination: +2° / -6 ° peripheral speed: 31,5 / 63 m/sec Rsdpfx Aslmmy Uja Eock MACHINE DETAILS machine weight: approx.10 t operating voltage: 400 V / 3 phases / 50 Hz rated current: 160 A

Condition: not inspected (used), Year of construction: 1992, functionality: unexamined, machine/vehicle number: 447, grinding wheel diameter: 250 mm, No minimum price - guaranteed sale to the highest bidder! Bidding commits you to timely pickup between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Grinding wheel diameter: 250 mm Control: SINUMERIK 805 Grinding speed: 63 m/s Axes X-axis: plunge slide Y-axis: dressing quill S Z-axis: dressing slide S C-axis: support U-axis: support R W-axis: dressing slide R CNC controlled: X / Y / Z / C MACHINE DETAILS Overall height: 2,200 mm Overall width: 2,500 mm Overall length: 2,800 mm Overall weight: 4,500 kg Redswvi E Uopfx Aa Eeck Operating voltage: 380 VAC 50 Hz Rated current: 100 A Connected load: 38 kW Transport can be carried out easily by a standard truck.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, power: 4.4 kW (5.98 HP), Löser KS100 BA contact belt grinding machine, centerless for pipes and rods, used, with pneumatic belt tensioning, year of manufacture 1999, in very good condition Rcodpfx Asqk Uyasa Ejk

Condition: used, Year of construction: 1978, grinding diameter max. 100 mm regulating wheel width 200 mm max. width of grinding wheel 200 mm grinding diameter 100 mm grinding length 250 mm feed in mm Rcsdpjt Hwtrofx Aa Esk working area mm speed m/min Bar length mm total power requirement 25 kW weight of the machine ca. 4.500 t dimensions of the machine ca. m K O E N I G & B A U E R (Germany) Centreless Grinder with Plunge-in Grinding Device Model Multimat 150 - 5 Year approx. 1978 S/Nr. 73 918 _____ Grinding Ø regular/maximal 2 – 50/100 mm Max. length of workpiece for Thru-Feed-grinding 250 mm Max. length of workpiece for plunge-cut grinding 200 mm Grinding wheel size, Ø x width 600 x 200 mm Regulating wheel size, Ø x width 300 x 200 mm Grinding wheel speed, max. 1.450 rpm/35 m/sec. Regulating wheel speeds (stepless) 10 – 140/230 rpm Regulating wheel tilt plus/minus +3 / –5 ° Stroke of Dressing Device 200 mm Grinding wheel drive, approx. 18,5 kW Total electrical load approx.. 25 kW - 380 V - 50 Hz Weight approx.. 4.500 kg Accessories/Special Features: * Machine is suitable for a Plunge-In Grinding Process with a manual workpiece Injection device and a pneumatic driven workpiece lift-off device after grinding Process. The final removal of the finished parts is by hand. * Actually mounted a workpiece rest for medium sized workpieces, (maybe 50 mm) * The Regulating wheel slide/workpiece rest carriage can be inclinate by 3 to 5 degrees to compensate cylindrical errors. * The infeed adjustment of workpiece saddle is controlled by a hydraulic plunge-in device with a cam device for quick-feed forward and backwards, also there is a fine infeed actuated by a step motor controlled by MARPOSS – Unit. * The grinding spindle unit is fixed and accommodates a complex hydraulic dressing device with template and the slide can be swivelled for profiling plane shoulders, stepmotor for the infeed of diamond tool compensation, also there is mounted a hi pressure coolant nozzle to cool down the diamond tool and to rinse the grinding wheel. * Hydraulic driven Copy Dressing device mounted above the regulating wheel. * The regulating wheel speed is steplessly adjustable, higher speed during dressing poc. * The control panel contains all machine functions like Numbers of dressing cycles, number of workpieces, adjustable spark-out time, speed range, manual or automatic process, etc. * some sep. Flanges and grinding and regulating wheels, tool for changing the flanges,separate Hydraulic and sep. Switch cabinet, central lubrication, MARPOSS Unit, * ! Actually there is no Coolant device available ! Condition : Good to very good. Machine can be inspected under power. Ideal for small batch production. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, grinding wheel width: 220 mm, grinding wheel diameter: 500 mm, controller manufacturer: Siemens, controller model: Sinumerik, TECHNICAL DETAILS Grinding Grinding wheel diameter: 500 mm Grinding wheel width: max. 220 mm Control Control system: Siemens Sinumerik MACHINE DETAILS Redpfxswymdve Aa Eeck Electrical data Total power requirement: 35 kW

Condition: used, Year of construction: 1997, Centerless grinding machine BOCCA MALANDRONE R 120/500 CNC Rjdpfx Ashzvkwja Ejck GENERAL CHARACTERISTICS: Grinding Wheel Dimensions: Ø610xØ304,8x508 mm Regulating Wheel Dimensions: Ø355xØ152,4x508 mm

Condition: ready for operation (used), Year of construction: 1983, Process: centerless plunge grinding, max. workpiece diameter: 20mm, max. workpiece length: 80mm, without automation by vibratory bowl. An on-site inspection is possible. Rjdpfx Asw U T Txsa Ejck

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 5064, Please let us know your asking price. Sale only within Europe, incl. Turkey Rcodpeu Rdm Ujfx Aa Ejk Robot is not scope of supply - Robot not scope of supply Technical data see hand out Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: used, Year of construction: 1973, grinding diameter max. 30 mm regulating wheel width 12 mm Rcodot Hwwwspfx Aa Ejk max. width of grinding wheel mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, grinding wheel width: 230 mm, grinding wheel diameter: 500 mm, controller manufacturer: Siemens, TECHNICAL DETAILS Grinding Grinding wheel diameter: 500 mm Grinding wheel width: max. 230 mm Axes Redpfxjwyl Uys Aa Eock X-axis: Plunge slide Y-axis: Dressing quill "S" for rollers V2-axis: Dressing quill "R" W2-axis: Dressing slide "R" U1-axis: Support "S" U2-axis: Support "R" Control Control: Siemens MACHINE DETAILS Electrical Data Total power requirement: 35 kW