Used Lumber Sorting for sale (749)

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Dodpfx Ajw Sy T Hehujcp

Condition: used, Year of construction: 2022, machine/vehicle number: S220193, Wafer alignment system, max. wafer size 150 mm, max. wafer thickness 4.4 mm, with optical alignment module, underside microscope and CCD camera, as well as rack unit. NOTE: The system is in like-new condition and has not yet been used in production! Dcedpfx Ajxqiiaohujp

Condition: used, fuel type: diesel, Year of construction: 2017, operating hours: 9,667 h, Drive: Wheel Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW30 - Bucket 1800mm - Engcon tiltrotator system - Central grease system - Piping for hammer and sorting grab Dsdpfx Ahjwhiikeujcp

Condition: new, Year of construction: 2024, General information Field of application: Construction Reference number: 10 Weights Empty weight: 1.000 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Djdpfx Ahoq Ixtxjuocp Other information Delivery terms: DAP, EXW Working pressure: 210 bar Required hydraulic flow: 90 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you all range of selector/ demolition/ sorting grab/ grabs/ grapples. All grapples with one year warranty. Contact us for details. We have grapples from 100kg to 5000kg. selectorgrab, selector grab, grapple, grapples, grappin, Schrottscheren, greifen, megragad, grajfer, PINZAS DE SELECCIÓN Y DEMOLICIÓN, PINCE DE TRI, KOCKÁZATKÖVEK, TORTAS DE CLASSIFICAÇÃO, PUNCTE DE SORTURI, Pinze Demolitrici, Selezionatrici, Pinces de Demolition, chwytaka, chwytak

Condition: new, Sheet Rack New Dcsdpfxjxllvxe Ahusp Significantly less space required compared to stack storage Clearly organized sorting of all sheets – no searching, no restacking Expandable with additional sections – grows with your business Clean, orderly work environment – professional appearance Easy handling thanks to castor wheel at the front of the rack Delivered as a kit – low freight costs Robust steel construction – durable and resilient Technical data: Length: 2500 mm Width: 870 mm + 410 mm per additional section Height: 2390 mm Section width: 370 mm Images: show examples with and without extension section Can be expanded as needed with extension sections: Cost per section €1080 + VAT Availability: short lead time, available from stock Location: 26892 Heede/Ems

Condition: good (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 22,800 mm, conveyor belt width: 1,200 mm, total length: 22,800 mm, total width: 1,650 mm, Equipment: emergency stop, type plate available, Telescopic Belt Conveyor / Telescopic Conveyor / Conveyor Belt - Approx. 22.8 meters length Manufacturer: Caljan Condition: Very good, used Model type: CB4H 7.5/15.3-800 Serial no.: 204279 Year of manufacture: 2017 Drive: Hydraulic Total length (retracted): approx. 7,500 mm Total length (extended): approx. 22,800 mm Overall width incl. control cabinet: approx. 1,650 mm Overall width without control cabinet: approx. 1,200 mm Belt width: approx. 800 mm Djdoxprddspfx Ahuscp Belt type: smooth Conveying height incl. feet: approx. 970 mm Includes control cabinet Includes wiring diagrams The conveyor system has been operational until dismantling. Thanks to the excellent workmanship of the conveyor, your material glides gently to the destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic units for loading and unloading your goods, we are your competent partner! We will be happy to provide you with a customized offer or advise you on design and assembly. Simply let us know your requirements and local site conditions. Take advantage of our many years of experience and extensive network of specialists. We have already successfully implemented projects for companies in various industries, such as logistics, pharmaceutical, crafts, or the electronics sector. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer fully automated sorting technology or complementary components such as picking racks or containers. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Dcodpfsvvi Tyox Ahusp Storage location: Customer

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 2,200 h, CAT MH3024, still under full service contract. The excavator will be available from the end of February 2026. All maintenance carried out by AVESCO. Includes sorting grapple (almost new, 3 months old). Dcodpfx Ahjxtffvjusp

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Dodpfx Ahsxr Nwaeujcp

Condition: used, mileage: 49,000 km, power: 62 kW (84.30 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,800 kg, first registration: 12/2010, emission class: euro5, color: yellow, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net sales price: €8,190.- VAT deductible. EURO 5 2x sliding doors 1st owner Please do not send emails / no emails Emails cannot be processed due to time constraints. Thank you for your understanding! Opening hours and further information: Viewing and purchase possible without appointment: MO - THU: 9.00 to 16.00 FRI: 9.00 - 13.00 SAT: 9.00 - 12.00 Address: Tabakried 11 84076 Pfeffenhausen Please do not send emails / no emails Emails cannot be processed due to time constraints. Thank you for your understanding! For questions, please contact Christian Hirsch or our friendly staff. --- 3 seats registered / retrofit possible Three seats registered in the documents Special equipment: - Cab floor covering: rubber - Electric package 1 - Tailgate with window - Heated rear window with wiper system - High partition wall with fixed window in cargo area - Multifunction display/on-board computer - Instrument cluster with 2 gauges - Rear park distance control - Smoker package - Spare wheel with standard tires - Sliding door left in cargo/passenger compartment - Mud flaps front and rear - Seat trim/upholstery: Heavy-duty seat covers - Driver’s seat with lumbar support - Semi-high hardboard interior trim in cargo/passenger compartment Further equipment: - Driver/passenger airbag - Exterior mirror (aspherical, left) - Exterior mirror (convex, right) - Brake Assist (HBA) - Vehicle without windows in cargo/passenger compartment - No child lock in cargo/passenger compartment - Body/structure: panel van - Body version: standard roof - Headlight range adjustment Dcodpfjvh S Rlex Ahujp - Truck registration - Engine: 2.0 L - 62 kW TDI - Pollen filter - Wheelbase: 3000 mm - Low emission to Euro 5 standard - H4 headlights - Sliding door right in cargo/passenger compartment - Adjustable driver's seat - No front passenger seat - 1st row seating in cargo/passenger area omitted - Heat-insulating glazing - Permitted gross weight: 2.80 t Further offers in stock: !!! Large selection !!! !!! Constantly changing stock of Volkswagen T5 Transporters !!! VAT deductible --- more T5 Transporters in stock Prices: Price depends on: - Mileage - First registration - Visual condition - Technical condition - TÜV due / new TÜV - Service due - New service - 1-seater - 2-seater - 3-seater --- VAT deductible For questions: Christian Hirsch: !!! Emails will not be answered !!!! For questions, please contact Christian Hirsch or our friendly staff. For questions: Christian Hirsch For questions: Christian Hirsch Please try several times as we are often in customer meetings. Special equipment: Cab floor covering: rubber, electric package 1, tailgate with glazing, heated rear window with wiper system, high partition wall with fixed window in the cargo area, multifunction display/on-board computer, instrument cluster with 2 gauges, rear park distance control, smoker package, spare wheel with standard tire, sliding door left in cargo/passenger area, mud flaps front and rear, upholstery: heavy-duty seat covers, driver seat lumber support, semi-high hardboard interior trim in cargo/passenger area Further equipment: Driver/passenger airbag, aspherical left exterior mirror, convex right exterior mirror, brake assist system:

Condition: used, Year of construction: 2010, Demolition and sorting grapple, rotatable, manufacturer: CAT, model: 452-3054, year of manufacture: 2010, fully functional. Dcsdpfx Aow D N Acjhuop

Year of construction: 2022, condition: as good as new (ex-display), Log cleaner Disc screen, disc cleaner for cleaning and sorting firewood. Dedpjci U I Nsfx Ahuecp Fire Wood Cleaner Woodsifter

Condition: good (used), Year of construction: 2019, operating hours: 673 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 720 mm, bale height: 1,100 mm, overall weight: 12,500 kg, oil tank capacity: 800 l, power: 37 kW (50.31 HP), Technical data baler: Manufacturer Riko Ekos d.o.o Type S-60K (5) Year of construction 2019 Operating hours 673 hours, as of August 24 Number of pressed bales 1,127 bales, as of August 24 Pressing force main press 60 tonnes Dimensions of feed chute 1,100 x 1,400 mm Dcsdju Thicepfx Ahusp Filling volume / pressing cycle 2.1 m³ Bale dimensions 720 x 1,100 mm (W x H), the length is variable Drive power 37 kW Connected load, total 47 kW Tying 4-fold horizontal, fully automatic Throughput capacity with a bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour Filling volume of hydraulic oil tank 800 litres PLC control Siemens SIMATIC S7-1200 Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H) Transport weight press 12.5 tonnes Condition of the baler: The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use. Scope of delivery for the baler: 1 piece baler without conveyor belt, hopper and chute 8 pieces wire pulling stations, without wire 1 piece bale chute 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Used Hein Lehmann Double Deck Flip Flow Screener Year 2017 Dcedpfx Aou U N Ebehuop Screening Area 6 Metres x 1.2 Metres Double Deck c/w Poly Mats Top & Bottom Deck Complete With Chute and Framework Electric Motor c/w Prop Shaft Very Tidy Unit Weighs Approx 11 Tonne

Condition: refurbished (used), Year of construction: 2024, Saw blade solid carbide / HSS: max. 425 mm Drive power: - Two-stage with chain: 1.7/2.6 kW, - Two-stage with belt pulley: 3.7/4.5 kW Cutting speed saw blade (400 mm): - two-stage with chain: 10/20 m/min, 13/26 m/min, 15/30 m/min - two-stage with belt pulley: 20/40 m/min, 30/60 m/min Infinitely variable saw speed control fully electronic Working range square 90° max.:120 x 120 mm 45° max: Working range flat: 90° max.:230 x 80 mm 45° max: Working range round: 90° max.: 140 mm Dcedpfxeuiy Sbs Ahusp 45° max: Feed length single stroke:5-2000 mm Multiple stroke:5-9999 mm Feed speed AC servo max.: 500 mm/s Weight approx.:3600 kg Dimensions LxWxH:3500mm x 1300mm x 2100mm Installation area LxW: 3500mm x 1300mm Technical description Kaltenbach KKS 401/ KKS 451 NA 2000 Retrofit Kaltenbach KKS 401/ KKS 451 Retrofit High-performance automatic saw for steel. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and trouble-free operation of the system. Due to the design of the sawing system, it is possible to realize a very precise length tolerance. The machine is generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - Maintenance or replacement of all hydraulic cylinders and valve terminals - Optimization and overhaul of the cooling system - Replacement of general wear parts - Overhaul of the machine body The machine also features - Fully automatic feed - Fully automatic miter adjustment +/- 60° Warranty: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Scraper - Chain magazine for 6m materials - Removal gripper system for sorting the cut-off pieces - Removal gripper system for sorting the cut-off pieces and realizing a multiple recut at the end of the workpiece - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), Year of construction: 2012, Doosan MX 2600 ST , year 2012 Location 78176 Blumberg Turning diameter 760 mm turning length 1540 mm Control FANUC 31i Chuck diameter 254 mm Bar diameter 76 mm Spindle bore 86 mm Turning diameter over bed 1000 mm x-axis 630 x 220 mm z-axis 1585 x 1515 mm y-axis 230 mm Speed 4,000 rpm Spindle nose A2-8 Milling spindle speed range 10,000 rpm Djdpfx Asrcf Dyohuscp Tool changing device 80-fold Tool turret 12-position Tool holder BMT 65 P, Capto Drive 26/22 kW Total power requirement 100 kVA Machine weight approx. 15.5 t Space requirement approx. 6.1 x 2.7 x 3.0 m with counter spindle, lower tool turret, driven tools and 80-fold tool magazine Hydraulically operated hollow clamping device 12-station tool turret at the bottom with BMT 65 P Chuck blow-out system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on the counter spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for the main and counter spindles Automatic shutdown at the end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended coolant system High pressure and paper belt 80-fold tool magazine Due to high office costs (customs regulations) we do not deliver to Turkey, Iran, Russia and Belarus. Request more information

Year of construction: 2001, condition: used, Fully automatic feeding for finger jointing line Table width max 620 mm Dedpfx Ash Icimjhuscp Spinfeeder Automatic length sorting 3 lengths Bundle formation 3 x Buffer Packet turner Packet destacking Manual loading Buffer in front of zinc tray with 6 compartments Specification: Wood input length: min. 150 mm max. 600 mm wood cross section: min. 20 x 40 mm max. 80 x 180 Capacity: 6 milling tables/ min working height: 960mm Table width: 620 mm Plant width: Plant length: see pictures Plant is immediately available, already dismantled

Condition: good (used), Year of construction: 2019, operating hours: 2,320 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 720 mm, bale height: 1,100 mm, overall weight: 12,500 kg, oil tank capacity: 800 l, power: 37 kW (50.31 HP), Technical data baler: Manufacturer Riko Ekos d.o.o Type S-60K (6) Year of construction 2019 Operating hours 2,320 hours, as of August 24 Number of pressed bales 4,359 bales, as of August 24 Pressing force main press 60 tonnes Dimensions of feed chute 1,100 x 1,400 mm Filling volume / pressing cycle 2.1 m³ Bale dimensions 720 x 1,100 mm (W x H), the length is variable Drive power 37 kW Connected load, total 47 kW Tying 4-fold horizontal, fully automatic Throughput capacity with a bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour Filling volume of hydraulic oil tank 800 litres PLC control Siemens SIMATIC S7-1200 Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H) Transport weight press 12.5 tonnes Condition of the baler: The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use. Scope of delivery for the baler: Dsdpfx Ahsu Thipeuocp 1 piece baler without conveyor belt, hopper and chute 8 pieces wire pulling stations, without wire 1 piece bale chute 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture Dsdpfx Ahoncc Icjuocp crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Transport can be organized

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Dcsdpfxeu R Rtbs Ahujp

Condition: refurbished (used), Model 11 completely overhauled Description: CNC cross-cut system Paul MKL or K or KE as desired Manufacturer: Paul Dcodpfx Ahjb Rl I Houep Year of manufacture: General overhauled with newest technology Condition: As good as new Technical data: Cutting width 150 mm Cutting height 85 mm Saw blade diameter:450 mm Saw motor 5,5KW Input length as required CNC Maxi 5 control with optimization Sorting belt as desired Machine would be completely overhauled, all bearings new motors new with latest eff Class, new control, new swingarm.

Condition: used, Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Dcedpfeu Tg Siox Ahuep Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochures, etc.) is not held by the spikes and falls into a paper bunker or onto a discharge conveyor after the chute. The spiked cardboard boxes are knocked off the sorting roller by the knock-off shaft and then fall onto the cardboard removal belt or into a separate bunker. Throughput capacity: Depending on pre-sorting, the nature of the feed material and machine settings, between 10 and 12 tonnes per line, per hour can be processed. Scope of delivery: 2 pieces PaperSpike 2G incl. 2 geared motors 2 pieces accelerator belt incl. gear motor 2 pieces paper discharge belt incl. gear motor (The cardboard discharge belt is not for sale and is therefore not included in the delivery! There are two lines available for sale. Depending on the customer's request, either one unit or both units together are sold. The sales price always applies to one unit. Comments: The plants are expected to be dismantled by the end of October and will then be ready for loading. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Feed by means of rollers, 6 pieces top, 6 pieces bottom CNC control Maxi 8.0 Dcsdpfx Asr A Et Tehuop 1 X sorting unit per 11.5 m Machine is set up according to your wishes

Condition: used, Technical data IFE cascade screens (vibrating waste screens): Manufacturer IFE Aufbereitungstechnik GmbH, Austria Type SM 2400 x 5000 F - UW30 Year of construction 2009 Drive motor 22 kW Rated current 43 A Screen dimensions overall 5,000 x 2,400 mm (l x w) Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d) Screen hole grid 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments) 400 mm Swing width max. 18.5 mm Weight approx. 6,600 kg Possible applications: The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for screen cleaning are the greatest advantages of this plant technology. Dcjdju Tg Rrepfx Ahuep Remark: The screen plates / screen segments have been covered with steel plates without a screening function over the course of time for use in the paper sorting system. The steel plates are only attached and can be removed again. Remarks on the overall layout: Technical documentation for the machine is only available in German. An inspection of the machine is possible by arrangement. We do not accept any liability for the technical data or any errors.

Year of construction: 2002, condition: good (used), Min. inlet length: 500 mm, max. 5.5 m. Cross section: max. 85 X 150 Motor: 5,5 kW Djdpsbg Svhjfx Ahuecp Sawing stroke servo rocker Feed by rollers, 5 pieces on top, 5 pieces on bottom CNC control Maxi 4.0 1 X sorting each 11,5 m year of manufacture 2002