Used Lumber Planer for sale (1,554)

Condition: used, Planer head for professional, machine-based machining of solid timber, wood-based materials and other suitable materials. Two clamping strips are missing, hence Z2. Dwjdpfezv Nmpjx Alted Technical data: - Blade: Z2 planer blade - Cutting circle (ø): 125 mm - Bore: 40 mm - Length: 150 mm - Material: steel

Condition: used, Planer heads for the professional, machine-based machining of solid timber, wood-based materials and other suitable materials. Technical data: - Blade: Z4 planer blade - Cutting circle (ø): 163 mm - Bore: 50 mm - Marking: MEC - Length: 150 mm - Material: Steel Dsdozwwvuepfx Altewd - Clamping: Hydro

Condition: used, Surface planer Manufacturer: Kampmann Technical details: Table width: 500mm Planer shaft: 4 knives Infeed table: 985mm Dsdpfx Aozuzdwsltswd Outfeed table: 1000mm Motor: 4kW Ready for plug-in operation Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Dedpfx Alez A Hhuotowd

Condition: used, Year of construction: 2023, New exhibition machine! List price €11,950 net • Equipped with a TERSA cutterhead for ultra-fast cutter blade changes • The TERSA cutterhead system enables particularly quiet operation • Helically toothed steel feed roller for consistent and uniform material feed • Material feed with two speeds via a separate motor • The particularly long planing tables facilitate easy and precise adjustment of the workpieces • Work tables are made of cast iron, annealed and stress-free, making them durable and permanently flat • Planing tables that open simultaneously towards the rear for short setup times • Planing table adjustment via handwheel with numerical display for planing height • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Material removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helically toothed feed roller (ideal for economical planing of hardwood) • Quality - Made in Europe Equipment details: Tersa cutterhead • No more adjusting and screwing required • Cutter blade changes in seconds • Self-locking • Particularly quiet operation The material feed • Helically toothed steel feed rollers for a consistent and uniform wood feed without leaving marks • Several teeth engage simultaneously for powerful feed • Wear-free compared to rubber feed rollers Fixed dust extraction hood • Thanks to the fixed dust extraction hood, there is no need to change the dust extraction hose when retooling • This saves valuable working time Simultaneous opening of the planing tables • Simultaneous tilting of the planing tables with spring support for quick and convenient adjustment for thickness planing in seconds Thickness table adjustment • FS 41 elite s with thickness table adjustment via handwheel with integrated display • The thickness table is mounted on four large-sized spindles, which ensure maximum stability under all working conditions. • Thanks to the special lifting device, the table position remains perfectly maintained even without locking. Anti-recoil guards • Massive anti-recoil guards prevent workpieces from recoiling • The 4-cutterhead ensures an optimal planing result Anodized aluminum planing fence • Large-sized (1200 x 150 mm) • Easy to move • Adjustable from 90° to 45° via a scale • Supplied as standard with an auxiliary fence for safe planing of even narrow workpieces Technical description - Planer Overall length of the tables 2200 mm - Planer Working width 410 mm - Planer Material removal max. 5 mm - Planer Dimensions of the planing fence 1200 x 150 mm - Thickness Dimensions of the thickness table 775 x 410 mm - Thickness Working height min. 3 mm - Thickness Working height max. 240 mm - Thickness Feed speeds 6 / 12 m/min - Cutterhead speed 5000 1/min - Cutterhead diameter 95 mm - Number of cutter blades 4 pcs. - Electrical connection 400V / 50Hz - Motor power 5.0 kW - Dimensions (L x W) 2250 x 1440 mm - Dust extraction port diameter 1 x 120 mm - Weight 450 kg Dsdpfxoz Ebprj Altswd Storage location: Rieth

Condition: new, Year of construction: 2026, machine/vehicle number: DMS 51 E, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, type of input current: three-phase, planing width: 510 mm, tool diameter: 100 mm, rotational speed (min.): 5,000 rpm, total length of planing tables: 860 mm, overall weight: 640 kg, Equipment: CE marking, Thickness planer DMS 51E with a three-row spiral cutterhead, 84 knives, four-way rotatable, and reversible indexable inserts 15x15x2.5mm. Dwedpfoz E A U Njx Altsd Planer width 510mm, 2 table slide rollers with fine adjustment in the thickness table. The thickness table is mounted on four large-sized spindles, ensuring stability and preventing tilting; the height adjustment of the thickness table is motorized via push buttons with fine adjustment and an electronic digital display, as well as an integrated handwheel on the side. Thickness table dimensions are 860 x 530mm, working/planing height is 3.5-230mm. Maximum chip removal is 6mm. Steel infeed roller with spiral teeth for optimal feed, and a satin-finished steel outfeed roller. Feed speed is continuously adjustable from 4-20 m/min. Minimum working length is 240mm. Dust extraction nozzle Ø160mm, standard with noise protection cladding. The robust steel-cast iron construction ensures a perfect planing result. The machine is test-planed at our facility before delivery.

Condition: used, SCM F410 Jointer Dodez Szbcepfx Altjwd 4-knife cutterhead Fence with comb guides Width 410 mm Table length 2600 mm Adjustable infeed table angle Well-maintained machine, quiet operation

Condition: used, TOS P23 four-sided planer – 250 x 180mm Manufacturer: TOS SVITAVY Model: P23 Max. height: 180mm Max. width: 250mm Adjustable feed rate: 5-40 m/min 8 cutterblocks 2 x bottom 2 x right 2 x left 2 x top Dedpfx Ajz Niiieltswd Pneumatic roller pressure Robust planer

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 3.8203, travel distance X-axis: 7,570 mm, travel distance Y-axis: 4,900 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 18,700 mm, table length: 6,850 mm, table width: 2,250 mm, total width: 8,500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,000 rpm, total height: 7,050 mm, table height: 300 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 2,750 mm, type of input current: AC, table load: 60,000 kg, workpiece weight (max.): 60,000 kg, distance table to spindle center: 2,500 mm, overall weight: 145,000 kg, spindle motor power: 63,000 W, feed length W-axis: 2,000 mm, MODEL: Portal Type AGE: 1990 S/N #: 3.8203 CATEGORY: Mills, Planer Type, CNC CAPACITY: Dsdpjyl S Ngjfx Altowd X-Axis Travel: 7570 mm Y-Axis Head Travel: 4900 mm Z-Axis Ram Stroke: 1000 mm, W-axis traverse movement: 2000 mm Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 2600-2750 mm Distance Table To Ram Face: 2500 mm Table Size: 2x3000+850 mm x 2250 mm, two tables for split or integral operation Spindle (Quill) Diameter: 225 mm Spindle Taper: ISO #50 Spindle Speeds: 0-2000 RPM Spindle Motor: 63 KW EQUIPPED WITH: SIEMENS System 840D CNC Control, new in 2008 CNC biaxial continous milling head Right angle Milling Head with Auto Indexing Right Angle Head prolonged with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors Way Covers 63 KW Spindle Motor Rapid movements: W-2000 mm/min, Z-10.000 mm/min, X and Y-15.000 mm/min Table loads: 30.000 kg+30.000 kg, max 60.000 kg Weight of the machine: 143.000 kg Outside dimensions: 18.700 x 8.500 x 7050 mm

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Djdpfx Asyahv Sjltowd Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 1987, Four-side planer Manufacturer: Weinig Model: Profimat 22 N Year of manufacture: 1987 Planing height: 220 mm Planing width: 120 mm Number of spindles: 4 Feed speed: 5 – 22 m/min, infinitely variable Total power: approx. 17 kW Spindle speed: 6,000 rpm Dwedpfx Aleww A T Ujtod - First spindle: bottom, 4 kW, tool diameter: 125 mm - Second spindle: right, 5.5 kW, tool diameter: 180 mm - Third spindle: left, 5.5 kW, tool diameter: 190 mm - Fourth spindle: top, 4 kW, tool diameter: 200 mm

Condition: used, functionality: unexamined, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 410 mm, number of blades: 2, actuation type: manual, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total length of planing tables: 2,500 mm, total width: 410 mm, overall weight: 650 kg, Kamro Planer AFK 4 Planing width 410 mm, Infeed table approx. 1280 mm, Outfeed table approx. 1200 mm, 2-knife cutterhead Motor 3 kW, Dedpfsy E Ivwsx Altowd As inspected, ex works from Seevetal location, Subject to prior sale.

Condition: used, Year of construction: 1992, completely shut down used good condition cleaned functionally tested partially overhauled Manufacturer: Martin Type: T 53 Year of manufacture: 1992 Machine no.: V190268 GS-tested for wood dust Control panel at the top Pendulum guard Table edges with low noise Safety cutter block Table adjustment with foot-operated hydraulics Digital display for chip thickness Digital display for groove depth Automatic brake Dedjz Np I Ejpfx Altowd Groove depth adjustment Motor kW: 5.5 Planing width approx. mm: 510 Table length approx. feeding length mm: total 2840 Dust extraction connection D mm: 160 Space requirement approx. L x W x H mm: 2900 x 900 x 1100 Weight approx. kg: 1000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Year of construction: 1978, condition: good (used), Weinig U 17N 7-head four-sided planer Planing width: 170 mm Planing height: 120 mm Number of spindles: 7 Spindle arrangement: bottom/right/left/right/top/bottom/universal Electric height adjustment Dwjdpeg Sa R Djfx Altod Feed rate: 6.5 to 45 m/min Drive for feed rollers: cardan shafts 11 pull rollers from above

Year of construction: 1995, condition: good (used), planing width 220 mm planing height 140 mm tool diameter max 160 mm 2 x 5.5 kW main engines 3 kW feed motor feed speed 6 - 36 m / min - on the inverter feed on cardan shafts Dwjdpjg E Uqcjfx Altsd heads supported on both sides electric height adjustment

Year of construction: 1996, condition: excellent (used), working width 230mm working height 120mm 8 heads arrangement of heads: bottom (grooved)/right/left/right/top/top/bottom/universal head adjustment in two axes spindle diameter 40mm smooth adjustment of the feed speed Dodpfxslx Ei Ro Altowd digital displays of working dimensions electric adjustment of the pressure beam, left and upper heads pneumatic clamps of the pulling rollers grooved top

Year of construction: 1984, condition: good (used), Four side planer / moulder Unimat 22A, 7 spindles Year of manufacture 1984 S/N 640-492 Manufacturer Weinig Germany planing width 220mm planing height 120 mm 7 planing shafts: 3 smooth driven rollers in the table Dressing table length 2000mm Spindle arrangement ( speed of the working spindles 6000 rpm ) 1. bottom, 4 kW 2. right, 3 kW 3. left, 4 kW Dodpfx Ajpqxuteltowd 4. right, 4 kW 5. top, 7,5 kW 6. bottom, 4 kW 7. universal, 11 kW driven smooth pull-out roller in table spindle diameter 40 mm Flight circle of the dressing spindle 125mm Flight circle of the jointing spindle 100-180mm Largest flying circle of the moulding spindles 180mm Cardan feed Infinitely variable feed rate (frequency converter) 6-36 m /min. Manual waxilit pump Outer dimensions L 4000 mm x W 1600 mm x 1700mm 4500 Kg

Year of construction: 2024, condition: new, max. cutting height – ø 340 mm min./max. cutting width 80 – 250 mm min./max. side fence 18 – 80 mm max. cutting length 6,000 mm Feed rate 5 – 30 m/min Saw motors 2 x 55 kW Feed motor 4.0 kW Width adjustment motor 0.55 kW Infeed roller motor 0.75 kW Weight 8,000 Optional equipment Self-adjusting laser Infeed table extension up to 8,000 mm Automatic width adjustment with 6 fixed dimensions Equipped with 1,000-mm-ø blades Motorized log rotating device Dwedpsu Izkefx Altsd Electronic braking system

Condition: used, Year of construction: 2017, Four-sided planer Manufacturer: WINTER Holztechnik Type: Timbermax 5-23 Year of manufacture: 2017 Technical data - Number of spindles: 5 - Processing range: 20-230 x 8-160 mm - Feed rate: 6 - 36 m/min - Suitable for processing wet wood - Weight: approx. 3,800 kg - CE marked Djdpfx Aszy Nx Hsltjwd Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been inspected by our specialist staff and is in mint condition. Technical specifications: - Planing thickness width 410 mm - 3 knife blocks (reversible knives) - Dual folding planing tables - Planer stop pivots 90-45° - Thicknessing height 4-225 mm - 5.5 HP (4 kW) motor / 400 volts Djdpfx Aev Scx Uoltjwd - Year of manufacture 2024 - Machine number 52.02.285.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planer, planing, thicknessing Reference: R-L0J2U

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Dwsdpfoy Sf Ukex Altjd Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: excellent (used), Year of construction: 2022, For sale is a used Hammer A3-31 planer-thicknesser with a planing width of 310 mm. The machine is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Planer-thickness width 310 mm - 3 knife shafts (reversible knives) - Thickness height 4-225 mm - Dual foldable planer tables - Pivoting planer stop - 2.9 kW / 4 HP motor / 400 volts - Year of manufacture 2022 Dwsdpfxsv Ianxe Altjd The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-AT0YY

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - max. width of the workpiece 230mm - max. height of the workpiece 170mm 6 spindles: 1) horizontal, lower 230mm, 5.5kW 2) vertical, right 170mm 3) vertical, left 170mm (2 and 3 spindles) 11kW 4) horizontal, upper 230mm, 11kW 5) horizontal, upper 230mm, 7.5kW 6) horizontal, lower 230mm, 11kW - all spindles adjustable up/down, left/right - spindle 4 and 5 with electric up/down adjustment - spindle speed 8000 rpm - spindle diameter 40mm - all spindles equipped with an electric brake - 6 feed rollers from above, pulling, toothed, including 1 double roller - feed roller from above, pulling, rubber, double - feed roller from below, pulling, rubber, double - side pressure - feed on Cardan shafts - rollers pressed pneumatically - stepless feed speed adjustment 6-24m/min - feed motor 4kW - electric adjustment of planing thickness - body lifting motor 0.55kW - central lubrication of the table - diameter of dust extraction nozzles 6x140mm - dimensions L/W/H 4900x2400x2000mm - weight approx. 4000kg ADVANTAGES - German production, WEINIG brand - with 6 heads - unpainted - used planer, very good condition Original photos Dwsdpfxezwwc Is Altsd Net price: 122900 PLN Net price: 28580 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Technical specifications: Max. planing width: 180 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom, right, left, top Number of steel upper feed rollers: 3 Smooth feed rate adjustment Feed mechanism: via universal joints Power supply: 400 V Total power: 16 kW Overall dimensions: Dwjdpfx Ao Ah Elnjlted Length: 3150 mm Width: 1100 mm Height: 1450 mm

Condition: excellent (used), CATALOG NUMBER: 6679 TECHNICAL DATA - max. width of workpiece: 250mm - max. height of workpiece: 170mm 6 spindles: 1) horizontal lower 250mm, 5.5kW 2) vertical right 170mm, 5.5kW 3) vertical left 170mm, 5.5kW 4) horizontal upper 250mm, 7.5kW 5) horizontal lower 250mm, 7.5kW 6) universal 250mm, adjustable at an angle of 360°, 5.5kW - 6 spindles with electric up/down adjustment - all spindles adjustable up/down, left/right - spindle diameter: 40mm - 6 toothed, pulling infeed rollers from above, including 2 double rollers - 6 pulling outfeed rollers from above, rubber, smooth, including 2 double rollers - 2 pressure rollers from above - toothed, pulling, swiveling infeed roller from below, in the bed before the first spindle - 2 pulling outfeed rollers from below, metal, smooth - 4 side pressure rollers from below Dwjdezxqvwspfx Altsd - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment on a frequency inverter: 6-30m/min - feed motor: 4kW - working pressure: 8-10 bar - electric adjustment of planing thickness - body lifting motor: 1.1kW - central lubrication of the bed - length of the infeed bed: 2180mm - diameter of dust extraction nozzles: 6x150mm - dimensions (L/W/H): 5000x1800x1900mm - weight: approx. 4600kg ADVANTAGES - Made in Italy - With 6 heads - DTR + CE documentation - Ideal for both wet and dry wood - Universal spindle - In perfect condition / like new Net price: 114900 PLN Net price: 26720 EUR Net price calculated at an exchange rate of 4.3 PLN/EUR (prices may vary with significant exchange rate fluctuations)