Double-sided sanding machine

Loewer DSM 2000

Condition: new, Number of sanding units 2 St. sanding width 190 mm Sanding height max. 2-180 mm LÖWER double-sided grinding machine DSM 2000 ----- Double-sided single wood sander for sanding Solid wood such as window wood etc. Stable top quality Guide with long casting tables, brushing and finishing equipment and conveyor belt feed. Suitable for high continuous loads even with higher chip removals. - Staggered sanding and finishing units at the top and bottom - Directly driven rubberized grinding rollers for slip-free power transmission - Combined grinding via roller and shoe for high chip removal at the same time flat intervention zone - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and higher grinding Grinding belt service life - Forced pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the sanding rollers Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom using a precision threaded spindle Dimension display via scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinders with constant clamping pressure - Sanding belt change with pneumatic belt relaxation in seconds - Adjustment of the sanding belt run when changing the belt - electro-pneumatic compressed air monitoring - Run-in protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated non-slip and non-stick conveyor belts over heavy, 1000mm long cast tables with a finely planed surface and Spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - automatic workpiece thickness scanning (no previous measurement necessary) - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Grinding thickness: 2-180mm - two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11 and 16 m/min. - automatic height adjustment: 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle: 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height: 850mm - Length: 2105mm Dwedsvu Hdtepfx Aa Ioc - Length with control panel 2490mm - Width: 880mm - Height: 1910mm - Weight: approx. 1500 kg - Operating voltage: 400 volts, 50 Hz, 3P - CE version ----- ----- Basic price of the machine on request! ----- ----- Special accessories with surcharge: continuous feed 4-20 m/min. for speed adjustment to the previous machine Price on request Workpiece blow-off - using nozzles from above and below at the machine ...

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure Dedpoyrty Hjfx Aa Ijwc - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 10229, functionality: fully functional, operating hours: 25,000 h, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 200 mm, grinding belt length: 1,800 mm, grinding height: 190 mm, height adjustment type: electric, actuation type: electric, total height: 1,890 mm, total length: 2,070 mm, total width: 1,020 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, The machine is in very good condition, has been used only a little, with the option of refurbishment upon agreement. Dsdpfxeyt Hkuo Aa Iswc