Used Liquid Fertilizer for sale (1,871)

Condition: used, Year of construction: 2009, Transformer Manufacturer: SGB Type: DOTUL 400 H/20 Year of manufacture: 2009 Rated power: 400 kVA Rated current: 550 A Voltage ratio: 24.0/1.1 kV Rated frequency: 50 Hz Protection class: IP54, operating DB Connection group: Dyn 5 Cooling: ONAN Insulating liquid: Nytro 4000X Oil quantity to be drained at +20° C: 3.8 l Total weight: 1,600 kg Oil weight: 0.300 kg 191026ä Pjdsz Atgaopfx Akiegu

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement Pgjdpfoy Ah Rcsx Akisu EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 660 mm, number of axes: 5, number of slots in tool magazine: 22, controller manufacturer: BIESSE, controller model: XP600, spindle speed (max.): 22,000 rpm, This 5-axis BIESSE Rover C 6.65 was manufactured in 2009. It features a working area of 6,200 x 1,520 x 275 mm and a powerful main electrospindle with a maximum speed of 22,000 RPM. The machine includes a 22-position tool changer and an integrated vacuum system for efficient operation. If you are looking to get high-quality CNC machining capabilities, consider the BIESSE Rover C 6.65 CNC processing center we have for sale. Contact us for further details. Pedpfez Trctjx Akiogu - Control Unit: Biesse XP600 (Upgraded to PC with Windows 10 OS in 2021)- Main Electrospindle Power (S1 100%): 12 kW @ 12,000 RPM- Main Electrospindle Power (S6 40%): 15 kW @ 12,000 RPM- Max Spindle Speed: 22,000 RPM- Tool Interface: HSK F63- C-Axis: 360° continuous rotation (Replaced complete in 2015)- B-Axis: +/- 100° (positioning), +/- 98° (interpolation)- Z-Axis Stroke: 660 mm- Z-Axis Feed Speed: 30 m/min- Drilling Head: BH 9 (5 vertical spindles at 32 mm pitch in Y, 2 horizontal double-output spindles)- Tool Changer: 22-position chain-type tool changer (180 mm pitch, max tool dia 250 mm) + 1-position Pick-up tool changer- Work Table: 10 ATS work tables (L = 1,525 mm), 30 module supports with Electronic Positioning System (EPS X-Y)- Vacuum System: Vacuum pump 250 m³/h (Replaced in 2016)- Cooling Unit: 1,600 W liquid cooling unit for electrospindles- Chip Conveyor: Integrated chip transport belt in machine bed- Optional Equipment: Uniclamp clamping devices (20 double-stroke, 10 round), 8 horizontal clamps, 20 vacuum modules (132x146 H74mm), 6 vacuum modules (132x75 H74mm), 8 positioning aids (36 kg lift force each), saw blade 350 mm Z=28, safety fence elements, control cabinet with air conditioning.- Software: NC-Hops 5-axis license, ACADemy 2D CAD, Automatic suction cup positioning module.

Condition: used, Year of construction: 2023, operating hours: 1,621 h, machine/vehicle number: 6000030, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 575 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 875 mm, total height: 6,600 mm, total length: 8,200 mm, total width: 4,800 mm, overall weight: 32,000 kg, spindle speed (min.): 17,500 rpm, spindle speed (max.): 1 rpm, distance table to spindle center: 1,300 mm, distance table center to spindle nose: 425 mm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Technical Data Operating time: 1,621 hours Technical Data Supply voltage: 3 × 400 V / 50 Hz (earthed) Supply system: TN-S or TN-C system Total connected load: 105 kVA Nominal load factor RDF: 0.6 Circuit breaker: 160 A gG (5 s) Dimensions Footprint including coolant cleaning system (W × H × D): 8.20 × 4.80 × 6.60 m Weight Operating weight of the machine: 32,000 kg Transport weight: 27,000 kg Control System CNC control: SIEMENS SINUMERIK 840D SL Main Spindle Spindle arrangement: horizontal Design: liquid-cooled motor spindle, AC synchronous technology Spindle lubrication: oil lubrication with minimum quantity lubrication Tool holder: HSK-A63 Tool Clamping System Mechanical clamping force: > 18 kN Setting dimension: 10.5 ± 0.1 mm Performance Data Speed range: 1–17,500 min⁻¹ Acceleration time: 0.7 s Power: 35 kW Nominal power: 26 kW Torque: 80 Nm (40% duty cycle) Nominal torque: 60 Nm Tool Magazine Tool change system: pick-up Tool management: permanently coded Capacity: 40 (1 × 40) tools Maximum total tool load: 200 kg Working Area X-axis: 3000 mm Y-axis: 1800 mm Z-axis: 875 mm Distance between spindle and center of swivel table: 425–1300 mm Tool change position X/Y/Z: 0/0/-310 mm Drive System General Design: Three-phase linear motors Position measuring system X-/Y-/Z-axis: direct, absolute X-axis Rapid traverse speed: 120 m/min Maximum acceleration: 10 m/s² Relative acceleration increase (G0): 200 m/s³ Relative acceleration increase (G1): 50 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Y-axis Rapid traverse speed: 120 m/min Maximum acceleration: 16 m/s² Relative acceleration increase (G0): 600 m/s³ Relative acceleration increase (G1): 300 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Z-axis Rapid traverse speed: 120 m/min Maximum acceleration: 20 m/s² Relative acceleration increase (G0): 1000 m/s³ Relative acceleration increase (G1): 500 m/s³ Peak force: 7,000 N Nominal force: 3,500 N Accuracy Positioning accuracy A: ≤ 0.010 mm Repeat accuracy R: ≤ 0.006 mm Tool Change Average chip-to-chip time at n < 17,500 min⁻¹: 4.00 s Workpiece Handling Design: Swivel table driven by an AC servomotor with two opposing clamping surfaces Swivel table: bilateral locking via gear coupling, hydraulically actuated Swivel time 0/180 degrees: 4.0 s Maximum asymmetrical load: 3000 Nm Repeat accuracy at a diameter of 1200 mm: ≤ 0.010 mm Maximum dimensions of clamping device and workpiece: Ø 2200 mm × 3480 mm Maximum weight of clamping device and workpiece per side: 1000 kg Swivel range: 358° Swivel range with parallel loading: -16°–0° and 164°–180° Worm gear division: 2° Maximum speed: 16 min⁻¹ Interface for Control Programs Rotary Distributor Rotary distributor pair for NC rotary table (A/U-axis): unregulated, leak-proof sealed Distribution channels: 16 Maximum hydraulic operating pressure: 250 bar Maximum operating pressure: 8 bar Nominal diameter: 6 Maximum permissible speed at p = 200 bar: 20 min⁻¹ Hydraulic System Operating pressure: 250 bar Flow rate: 9 dm³/min Psde Aax U Ispfx Akiegu Capacity of the hydraulic tank: 120 dm³ Hysteresis when charging the accumulator: 230–260 bar

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory liquidation mask production line. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for dispatch. Pgjdpexqgk Ujfx Akiju - Cross tables available - Ink return system integrated - Lateral lift integrated, can be deactivated if required The HERMETIC series can be used both as manual workstations and in automated applications. In manual operations, the machine impresses with its wide range of settings and high printing force; in automated applications, it stands out for its cam control system, which ensures a smooth and stable printing process. The absolute highlight is its drive mechanism: both the up-and-down movement of the printing pad and the forward and backward movement of the pad printing cliché are controlled by a cam disk.

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Storage location: Customer Psdpfx Aey D Rv Dekisgu

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 Motor grinding spindles (liquid-cooled, with forced air/oil mist lubrication) and REFU HF converter 316/25 Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032, 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF converter High-frequency converter (inverter, frequency converter) 316/25 Frequency converter/inverter for supplying the motor spindles GMN tool spindle motor grinding spindle The spindles are fully functional, without warranty – manufactured approx. 1992 A collection of various grinding spindle shafts/arbors for grinding wheels is available for these grinding spindles and can be purchased separately. e.g. for supplying the spindles of a Voumard grinding machine 400 CNC T4. Grinding spindle insert BM-15-170 Length 135 Spindle Ø130 Wheel Ø 188 M36 18-150 L 90-Ø120 Wheel Ø149M16 15-170 L125-Ø90 Wheel Ø148M36 15-170 L 120-Ø50 Wheel Ø198M36 24-150 L 128-Ø50 Wheel Ø88M10 18-150 L 195-Ø80 Wheel Ø136M36 24-150 L 70-Ø33 Wheel Ø48M10 24-150 L 120-Ø120 Wheel ØM14CBN 24-150 L 94-Ø50 Wheel Ø90M10CBN TSSV-170 L 125-Ø82 Wheel Ø125M36 170 L 125-Ø52 Wheel Ø79M36 170 L 185-Ø80 Wheel Ø96M36 170 L 105-Ø80 Wheel Ø86M36 170 L 148-Ø40 Wheel Ø84M36 170 L 165-Ø50 Wheel Ø70M36 24-150 L 65-Ø36 Wheel Ø66 CBNM10 15-170 L 95-Ø80 Wheel Ø100M36 24-150 L60-Ø40 Wheel Ø60M10 M15-170 L 155-Ø58 Wheel Ø120M36 Grinding mandrel TSSV -170 L 75 - Ø20M36 TSSV-170 L 230-Ø30M36 TSSV-170 L 144-Ø35 Wheel Ø37M14 BM18-150 L 132-Ø27 Wheel Ø29M14 TSSV-170 L 159-Ø20 Wheel Ø24M36 BM18-150 L 225-Ø20 Wheel Ø40M14 TSSV-170 L 158-Ø17 Wheel Ø18M36 TSSV-170 L 216-Ø30 Wheel Ø32M36 TSSV-170 L 140-Ø50 Wheel Ø52M36 TSSV-170 L 220-Ø23 Wheel Ø27M36 TSSV-170 L 230-Ø37 Wheel Ø38M36 BM15-170 L 195-Ø58 Wheel Ø72M36 BM15-170 L 270-Ø58 Wheel Ø74M36 TSSV-170 L 300-Ø45 Wheel Ø45M36 TSSV-170 L 245-Ø50 Wheel Ø75 CBNM36 TSSV-170 L 226-Ø42 Wheel Ø27M36 TSSV-170 L 235-Ø30 Wheel Ø36 CBNM36 TSSV-170 L 220-Ø48 Wheel Ø49M36 BM24-150 L 170-Ø35 Wheel Ø35M14 TSSV-170 L 197-Ø25 Wheel Ø38M36 BM18 -150 L195-Ø45 Wheel Ø66 CBNM14 BM24-150 L 156-Ø20 Wheel Ø23M14 BM24-150 L 194-Ø25 Wheel Ø38CBNM14 BM24-150 L 120-Ø25 Wheel Ø35CBNM14 TSSV-170 L 20-Ø20 Wheel Ø34M36 BM24-150 L 116-Ø20 Wheel Ø45M10 BM24-150 L 110-Ø26 Wheel Ø34M14 BM24-150 L 85-Ø25 Wheel Ø61CBNM14 BM24-150 L 10-Ø40 Wheel Ø30M14 BM24-150 L 75-Ø16 Wheel Ø19M14 TSSV-170 L 157-Ø40 Wheel ØM36 BM24-150 L 176-Ø45 Wheel Ø65 CBNM14 Grinding spindle insert BM 24-150 Length 40–Ø 40 Wheel Ø60M10 BM18-150 L 40-Ø37 Wheel Ø100 CBN M18 TSSV-170 L 15 -Ø40 Wheel Ø58M16 BM24-150 L 30-Ø18 Wheel Ø18M14 150 L 29-Ø20 Wheel Ø20M14 150 L 50-Ø20 Wheel Ø34M10 150 L 50-Ø40 Wheel Ø41M14 BM18-150 L 10-Ø40 Wheel Ø55M16 BM24-150 L 10-Ø26 Wheel Ø32M16 150 L 10-Ø25 Wheel Ø60M16 150 L 52-Ø13 Wheel ØM14 150 L 92-Ø26 Wheel Ø37M14 15 L 10-Ø40 Wheel Ø50M16 150 L 80-Ø47 Wheel Ø66CBN M14 150 L 85-Ø12 Wheel Ø15M14 150 L 10-Ø42 Wheel Ø50M16 150 L 25-Ø25 Wheel Ø25M14 Pjdjl Tn Afepfx Akiogu 150 L 30-Ø26 Wheel Ø41M14 150 L 100-Ø10 Wheel Ø25CBNM14 150 L 43-Ø20 Wheel Ø30CBNM14 150 L 54-Ø13 Wheel Ø47M14 150 L 63 Ø35 Wheel Ø48CBN M14 150 L 40-Ø40 Wheel ØM10 150 L 30-Ø20 Wheel Ø35M14 150 L 45-Ø20 Wheel Ø24M14 150 L 17-Ø25 Wheel Ø60M16 150 L 55-Ø19 Wheel Ø30CBNM14 150 L 25-Ø25 Wheel Ø38CBNM14 Price / Details on request. All technical specifications are subject to errors and omissions. We only sell to countries within the European Co

Condition: good (used), Year of construction: 2012, overall weight: 10,000 kg, Used TechnoTurn Machine equipment: Fixed portal. The following components are mounted on the portal: B-axis with 360° movement, automatically controlled by the CNC. The group carrier plate is mounted on the dovetail slide. “TURN” milling head for milling and sawing on all 6 sides of the workpiece. The milling head has the following features: Special milling unit with 2 independent outputs (A-B). A-output: Tool holder HSK 63 F for automatic tool changing, infinitely variable speed from 1000 to 18000 rpm. B-output: Flange mounting for the saw blade, max. Ø 600mm with programmable speed from 1000 to 4,000 rpm. Spindle power of 12 kW at 7000 rpm. Programmable speed from 1000 to 18000 rpm. Liquid cooling. C-axis rotation 540°. Z-axis travel 1200 mm. X-axis travel 800 mm. Inverter 22 kW for spindle control from 1000 to 18000 rpm. Technical data: 7 controlled axes: 2X-Y-V-Z-B-A Axis travel X: 800 mm Axis travel Z: 1200 mm Rotation axis B: 260° Rotation axis A: 540° Maximum standard dimensions of the supports: 7,000 x 400 (h) x 240 mm. Maximum length of the supports with optional supports: unlimited. Minimum dimensions of the supports: 50x50 mm. Travel speed axis X: 63 m/min Travel speed axis Y-V: 102 m/min Travel speed axis Z: 68 m/min Psdpfx Aks Adrcgoiogu Rotation speed axis B: 12 rpm Rotation speed axis A: 28 rpm Electrical system: 400/50Hz ±5% Air consumption (6 bar): 400 l/min. Tool changer with 11 positions. Additional supports in the infeed and outfeed area. Processing of workpieces of virtually unlimited length. We will gladly answer any further questions upon request.

Condition: new, Landert Engines 112-28-MK-FAM2, liquid-cooled engine, serial number: 89289/002, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Psdpfoi D I Emex Akijgu

Condition: used, This Still low-lift order picker, type: EXU - S 24, will be auctioned off online as part of our industrial auction / machinery auction – site liquidation – former porcelain factory Triptis | tools | pallet racking | storage boxes | forklifts. You will find this and many other items on our platform. Psdpfx Ake Af Ivijijgu

Condition: good (used), Item description: Hofmann 4th axis RWNC - 160 from DMG DMU50T ----- Item condition: The item comes from a company liquidation. Condition: used. Functional video available. Internal number: 26,564 Pjdpezzkldjfx Akiegu

Condition: used, Year of construction: 2002, Used Machine Year of Manufacture: 2002 Features and Technical Specifications - CNC machining center for drilling, milling, and grooving operations - HOMATIC 2000 control system with woodWOP for convenient, workpiece-oriented programming - Liquid-cooled milling spindle for consistent operating temperatures and reliable operation at high cutting rates - HSK 63 tool holder with high clamping force for precise machining - Automatic tool changer - Digital axis drives - Positioning accuracy according to the manufacturer: 0.03 mm - Travel speeds X/Y/Z: 80/60/20 m/min - Travel range of the Z-axis: 370 mm - Maximum workpiece thickness: 100 m - Working length X/Y: 3,250/1,300 mm - Usable machining area depends on the tool and unit - Electrical power consumption: 14–22 kW, depending on configuration - Vacuum pump capacity according to brochure: starting at 100 m³/h - Compressed air connection: R 1/2 - Required compressed air pressure: 7 bar - Central exhaust connection: Ø 250 mm - Required extraction capacity: at least 4,950 m³/h Pedpj Af I Uwsfx Akiogu Additional features: - Vertical drilling spindles, individually controllable - Horizontal drilling spindles in the X and Y directions - Groove saw unit - 8-position tool changer, moving in the X and Y directions, for short tool change paths - C-axis for freely programmable positioning of compatible units from 0–360° - Crosshair laser as a positioning aid for quick setup - Cantilever table with freely positionable, hose-less vacuum suction cups; alternatively, a base or matrix table - For the console table version: workpiece loading aids, lowerable stops, and electric vacuum monitoring - Weight: approx. 4,500 kg Machine is available for demonstration in 15528 Spreenhagen The connected SCHUKO VacoVent 750 dust collector is also available for purchase: samstag.gmbh/maschinenbestand/1333-5931

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Podpfszwg H Aex Akijgu Mouse: Yes Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: used, Year of construction: 2007, Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data Pgsdpez I Rcaefx Akiou - Product: still wine - Containers: glass bottles, design bottle 0.75 l - Line output: 12,000 bottles/h - Closures: natural cork, aluminium roll-on screw caps, shrink capsules - Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line - Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off depalletizer, layer-pad and empty-pallet handling, 14,000 containers/h | 2023 | - Bottle washer | KHS | INNOCLEAN | single-end washer for returnable glass, up to 14,500 bottles/h, drive and panel modernised in 2022 | 2007 | - Empty bottle inspector | Krones | LINATRONIC M | base, finish, thread, sidewall and residual liquid inspection | 2018 | - Filler-closer monoblock | KHS | INNOFILL NRF | 50 filling valves, cork closer and Zalkin roll-on capper with 10 heads each, CIP, 12,000 bottles/h | 2007 | - Capsuling machine | Kematec | MBK 12 AS | shrink capsules, 12 heating stations, up to 12,000 bottles/h | 2006 | - Bottle dryer | Kematec | T20-3 KMT | air-knife tunnel | 2006 | - Labeller | Krones | ERGOMODUL | 2 cold-glue and 2 self-adhesive stations | 2020 | - Case packer | KHS | INNOPACK SP | pick-and-place packer, KUKA controller | 2006 | - Palletizer and stretch wrapper | ABB, Strapex | FLEXPALLETIZER, SWR 30 | 2 robot cells, pallet destacker, ring wrapper | 2007 | - Pallet labeller | Logopak | LOGOMATIC 920 II PF | print-and-apply | 2007 | - Conveyors | all connecting bottle, case and pallet conveyors of the line Process area - Filtration system | KHS | CORVUS | cartridge microfiltration, 4 housings | 2007 | - Wine warmer-cooler | KHS | INNOPRO | plate heat exchanger, up to 9,900 l/h | 2006 | Condition Used, still installed. Each machine is also listed on its own page with full technical data and photos - follow the link at the end of each row in the scope of delivery. Availability Available immediately. Location: Belgium. Delivery terms: Ex Works Belgium.

Condition: used, Year of construction: 2007, Overview This GALDI RG50/2 UCS is an automatic form-fill-seal machine for gable-top cartons, built in 2007 in Italy. It erects the cartons from flat blanks, fills and seals them at up to 3,000 cycles per hour, and a cap applicator is included. The machine currently fills liquid egg products and is suitable for milk and other liquid food products. It is still installed and in production. Technical data - Manufacturer: GALDI (Italy) - Model: RG50/2 UCS - Year of manufacture: 2007 - Machine type: automatic form-fill-seal machine for gable-top cartons - Capacity: up to 3,000 cycles per hour Podpfx Akoz Ipa Rsiogu - Carton format: 95 x 95 mm cross section - Products: liquid egg products; suitable for milk and other liquid foods - Installed power: 28 kW - Power supply: 380 V / 50 Hz - Weight: 5,000 kg Equipment - Magazine for flat carton blanks - Filling station with sanitary product valves - Cap applicator - Control panel with QuickPanel View touchscreen HMI and push-button controls Condition Used. The machine is installed and in production. A spare parts list is available. Spare parts can be offered in addition. Availability From 31 December 2026. Location: Belgium.

Condition: ready for operation (used), Year of construction: 2025, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, overall weight: 6,464 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2025. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool capacity of 30+1. If you are looking to get high-quality machining capabilities, consider the HAAS UMC-750 universal machining centre we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Spindle Nose to Platter (~ max): 24.0 in / 610 mm • Spindle Nose to Platter (~ min): 4.0 in / 102 mm • Spindle Max Torque: 90.0 ft-lbf @ 2000 rpm / 122.0 Nm @ 2000 rpm • Spindle Drive System: Inline Direct-Drive • Spindle Taper: CT40 | BT40 | HSK-A63 • Spindle Bearing Lubrication: Air / Oil Injection • Spindle Cooling: Liquid Cooled • B Axis (Tilt) Travel: +120° to -35° • B Axis Max Speed: 170 °/sec • B Axis Continuous Torque: 2240 ft-lbf / 3037 Nm • B Axis Brake Torque: 2000 ft-lbf / 2712 Nm • C Axis (Rotation) Travel: 360° • C Axis Max Speed: 179 °/sec • C Axis Continuous Torque: 1854 ft-lbf / 2514 Nm • C Axis Brake Torque: 900 ft-lbf / 1220 Nm • Max Part Swing: 27.0 in / 686 mm • Platter Diameter: 19.70 in / 500 mm • Max Weight on Platter: 660 lb / 300.0 kg • Max Weight on Platter w/ Pallet Pool: 200 lb / 90.7 kg • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Number of Std T-Slots: 7 • T-Slot Center Distance: 2.48 in / 63 mm • Max Cutting Feedrate: 833 ipm / 21.2 m/min • Rapid Feedrate (X, Y, Z): 1200 ipm / 30.5 m/min • Max Thrust X / Y: 3300 lbf / 14680 N • Max Thrust Z: 4050 lbf / 18015 N • Tool Changer Type: Side-Mount Tool Changer (SMTC) • Tool Capacity: 30+1 • Max Tool Diameter (full): 2.5 in / 64 mm Pjdsz Nmigepfx Akiogu • Max Tool Diameter (adjacent empty): 5.0 in / 127 mm • Max Tool Length: 12.00 in / 305 mm • Tool-to-Tool Time (avg): 1.80 s • Chip-to-Chip Time (avg): 2.40 s • Coolant Capacity: 55 gal / 208 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Air Pressure Min: 80 psi / 5.5 bar • Electrical Input AC Voltage (3 Phase): 220 VAC (70 A) / 440 VAC (35 A) • Shipping Weight (Standard): 14250 lb / 6463.8 kg Technical Specification Taper Size BT 40

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. Psdpfx Aey Ehrxjkiogu — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 Pjdjz Rrbwjpfx Akiogu WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: ready for operation (used), Year of construction: 2011, - 10-head rotary bottle filling machine - suitable for liquids such as wine, juices, sauces, beverages, oil, etc. - for bottles and/or jars Pedpfx Aez Ry Dajkiogu

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Psdpfxjw Ed U Ne Akijgu Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, Year of construction: 2008, Technical details: voltage: 400 V/A total power requirement: 26 kW weight of the machine ca.: 690 kg coolant device: 134a dimensions L x W x H: 1,75 x 0,8 x 2,0 m Pjdpfeyt Na Sox Akisgu The Riedel L16/29-TR3.24 cooling unit is an industrial water chiller manufactured by Riedel Kooling (Glen Dimplex Deutschland GmbH). It is commonly used for cooling laser machines, for example in TRUMPF laser systems. Device type: Industrial water chiller / laser chiller Application: Cooling of CO2 lasers, machines, and industrial equipment Design: Air-cooled liquid chiller Refrigerant: R134a *

Condition: used, Year of construction: 2022, Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Pjdpfx Aoz R Upljkiogu Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: - Automatic valve opening/closing - Centralized fill-level adjustment (±50 mm) - Maintenance-free lifting cylinders - Automated lubrication system - Integrated washing/CIP system - Remote teleservice via Ethernet Safety: CE compliant, transparent guards with microswitches Includes: Format parts for 600 & 1000 ml bottles; adjustable star wheels (+/- Ø55-95mm)  

Year of construction: 2026, condition: new, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro XL from the premium manufacturer Rational (successor to the VCC 311). Please inquire about availability! This multifunctional tilting frying pan can be adjusted to Balance Power (reduced power) as needed. This is new goods, in original packaging, fully functional, with a full manufacturer's warranty. The offer does not include any accessories, but they can be purchased for an additional charge if desired. The list price for this unit is €26,730 net = €31,808.70 gross. Psdpfozbk Efsx Akisgu You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational service partner throughout Germany. Our service for you: * Full manufacturer's warranty / from commissioning * High-quality branded equipment at fair prices * Professional overhaul / inspection & expert cleaning * Tested & fully functional - or money back * Flexible shipping or self-collection options * Competent advice - before and after purchase * Provision of operating instructions, connection diagrams & spare parts * Inspection according to DGUV V3 Technical data: * W x D x H: approx. 1365 x 894 x 1078 mm * Power connection: V: 400 / kW: 34 / Hz: 50 * Year of manufacture: 2026 * Capacity: 150 liters * Weight: 245 kg Condition: New goods, in original packaging, full manufacturer's warranty Further information: * Balance Power: reduced connection value from 41 to 34 kW * Integrated 230 V socket * Integrated hand shower with automatic retraction and spray dosage * High-quality pot bottom, seamless with rounded corners * Core temperature sensor with 6 measuring points * 1,200 programs, each with up to 12 steps, programmable and nameable * Integrated spray hose on the unit * Integrated water drain in the pot * Temperature unit adjustable in °C or °F * Cooking pot can be tilted * Lid with integrated water inlet * Automatic display of service messages * IPX5 splash water protection * USB interface for HACCP data output and updates * Including base with plastic feet Functions: * Manual mode (30°C-250°C): adjust liquid temperature, adjust pot bottom temperature, adjust oil temperature * Automatic, liter-precise water filling device * Delta-T cooking * Auto Lift: lifting and lowering device (baskets for cooking and frying) Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: used, BÜHLER Laboratory Stirred Ball Mill / Wet Grinding System BÜHLER FPML2 Premium Universal laboratory stirred ball mill for process development and product optimization For sale is a used laboratory stirred ball mill from the manufacturer Bühler AG, Switzerland. The PML 2 is a modular laboratory stirred ball mill for the research, development, and optimization of wet grinding and dispersion processes. It is suitable for low to medium viscosity products, as well as for the development and scaling up of industrial production processes. Technical Data Manufacturer: Bühler AG Type: FPML2 Premium Model: PML 2 Machine No.: 10425639 Year of Construction: 2007 Power Connection: 400 V Frequency: 50 Hz Connection: 3+N+PE Rated Current: 16 A Active Grinding Chamber Volume: 0.2 - 1.2 dm³ Volume of Inert Liquid Tank: 2.4 dm³ Inert Liquid Pressure: max. 7 bar Motor Power: 2.2 kW Rated Motor Speed: 3,000 rpm Rotor Speed: 500 - 4,500 rpm Machine Dimensions: Width: 617 mm Depth: 458 mm Height: 862 mm Cooling Water Inlet: G 1/2" Cooling Water Outlet: G 1/2" Compressed Air Connection: G 1/4" Pgjdezhkcpspfx Akieu Machine Weight: approx. 150 kg Hose Pump Weight: approx. 30 kg Gear Pump Weight: approx. 25 kg Laboratory Hose Pump Weight: approx. 8 kg Attachment Container Weight: approx. 5 kg Vat Weight: approx. 1.5 kg Application Areas Automotive OEM & Refinish Paints Anti-Corrosion Paints Industrial Paints Display and Electronics Materials Color Filter Technologies Metal Pastes Ceramic Pastes Glass Pastes Inkjet Inks Liquid Printing Inks Liquid Toners Agrochemicals Pigment Concentrates TiO₂ Dispersions Adhesives and Sealants Equipment Modular Laboratory Stirred Ball Mill Integrated Grinding Chamber Cooling Connections Control Unit Industrial Design Accessories according to scope of delivery and images Condition Used Optical condition according to images Signs of wear and tear due to age and use Scope of delivery as shown in the images Scope of Delivery 1x Bühler FPML2 Premium 1x Laboratory Stirred Ball Mill PML 2 Existing accessories according to images Important Note: A complete technical functional test has not been carried out. Sale according to condition and scope of delivery as shown in the images. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Changes and errors in the technical data and information are reserved. We would be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020012.010, total height: 870 mm, total width: 750 mm, total length: 1,400 mm, Equipment: documentation/manual, COMMERCIAL SALE As part of the liquidation of a company, we are selling the following used packaging machines. All machines offered are fully functional and were used in ongoing operations until recently. If you have any questions about the individual machines, possible combinations, or further details, please do not hesitate to contact us. Delivery and collection are possible by arrangement. Location: 41564 Kaarst-Holzbüttgen 1. & 2. Simons+Harren carton sealer NH-FJ-2 Two identical semi-automatic carton sealers, type NH-FJ-2 - 1x manufactured in 2020 - 1x manufactured in 2018 Technical data (both machines): - Operation: manual / pneumatic, 230 V - Sealing: Tesa adhesive tape - Dimensions: L 1,160 x W 970 x H 750 mm - Carton sizes approx.: L 150–∞ x W 120–470 x H 120–450 mm Price, manufactured in 2020: 3,000 EUR net Price, manufactured in 2018: 2,500 EUR net 3. Youngsunpack carton sealer MHFJ1AB (2013) Pjdpfx Akez S Hwvsijgu Semi-automatic, 230 V, Tesa adhesive tape Dimensions: L 1,100 x W 770 x H 700 mm Carton sizes approx.: L 150–∞ x W 120–480 x H 120–480 mm Price: 1,000 EUR net 4. Heripack HV-TX52.B (2018) Semi-automatic carton sealer / bottom closing machine 230 V, Tesa adhesive tape, automatic format adjustment Dimensions: L 1,400 x W 750 x H 870 mm Price: 2,700 EUR net 5. Simons+Harren bottom flap folding machine CF-10T (2017) Pneumatic side gusset folding machine Dimensions: L 1,400 x W 750 x H 870 mm Carton sizes: L 200–600 x W 150–480 x H 120–500 mm Price: 1,700 EUR net 6. Heripack bottom flap folding machine HB-Sonder (2020) Pneumatic/electric, side gusset folding machine Optimized for combination with item 4 (HV-TX52.B) Dimensions: L 1,650 x W 740 x H 750 mm Carton sizes approx.: L 150–800 x W 110–400 x H from 90 mm Price: 2,500 EUR net (Particularly attractive as a set with HV-TX52.B) All machines are available individually.