Used Line Drilling Machine for sale (69,949)

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Nodpfxsxyk Ucj Ahfslf

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Nlodpsx S Rcmsfx Ahfof

Year of construction: 1998, condition: ready for operation (used), A CNC PCB drilling and milling machine for PCB manufacturing is available. Stations: 2, Speed: 125000rpm, Collet: 3.175mm, Tool diameter range: 0.1mm-6.35mm, Working dimensions X/Y: 630mm/765mm, Positioning accuracy: 5µm, Repeatability: 4µm, Rapid traverse: 25m/min. Documentation available. An on-site inspection is possible. Nlodpfx Ahozhw Thofef

Year of construction: 1970, condition: ready for operation (used), A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible. Njdsxyk Tlepfx Ahfjlf

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Nedpfx Ahjy Tn Ntofolf

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Nledpoylbrqsfx Ahfjf

Year of construction: 1999, condition: ready for operation (used), Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement. Njdpfx Ahey Ull Usfslf

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Nlsdot Hkh Aepfx Ahfjf

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Nlodpfxex Tpyte Ahfof

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Column diameter 250 mm Nlsdjt Uzk Ropfx Ahfef Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1987, total width: 800 mm, total length: 1,200 mm, total height: 2,600 mm, Colour: Green Empty weight: 700 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 14441 - Drive system: Conventional - Drive system: Gear drive Njdozkq Aujpfx Ahfjlf - Power [kW]: 2.2 - Table type: Fixed table - Table length [mm]: 500 - Table width [mm]: 500 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 32 - Reach [mm]: 320 - Tool holder: MK4 - Main spindle power [kW]: 1.5 - Min. spindle speed [rpm]: 85 - Max. spindle speed [rpm]: 1500 - Options: Drill unit feed - Transport dimensions: 1200mm x 800mm x 2600mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15441 € 296.47 € 40 mm MK 4 300 mm 1,5 / 3,0 kW M30 610 mm 850 mm 1920 mm 440 kg 0 - 300 mm/U 160 mm 125 mm 150 - 700 mm 590 x 450 mm PV - DISPLAY WITH FOLLOWING FUNCTIONS: Nsdpfszv Ezcox Ahfslf - Display - Operation via function keys and rotary/push button - Selection of operating mode: manual drilling / drilling with feed / tapping - Infinitely variable speed adjustment - Feed rate setting - Zero point setting - Drilling depth setting - Piece counter - Spindle stop (automatically stops the spindle after the drilling cycle) - Free cutting time mode - Chip breaking mode(option, price on request) - Jump switch mode, for efficient drilling of square tubes (option, price on request) Drilling capacity / normal drilling performance 35/40 (in E335/ST60) Automatic feed Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection 3 years warranty for single shift operation Digital drilling depth, speed and feed rate display Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M30, setting the thread cutting depth via digital depth display Drilling depth shut-off; programmable; easy operation Drilling cross with pushbutton for feed on/off switching LED lighting as standard Art. - Nr. 207.208 R1(100-2.000 1/min) + cover black Art. - Nr. 207.226 R1(100-2.000 1/min) + cover transparent Art. - Nr. 207.209 R2 (70-.1.400 1/min) + cover black Art. - Nr. 207.227 R2 (70-.1.400 1/min) + cover transparent OPTIONS: Drill package (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2025, neu 2025 030140 prompt, Zwischenverkauf v Deutschland 13429.36 € 257.84 € 1 30 mm MK 3 280 mm Stufe 1: 125 - 2000; Stuf U/min 0,9 / 1,45 kW kW M20 820 mm 520 mm 1900 mm 320 kg 0 - 300 mm/U 240 - 790 mm 420 x 340 mm 125 mm PV - DISPLAY WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Selection of operating mode: manual drilling / drilling with feed / tapping - Infinitely variable speed adjustment - Feed rate setting - Zero point setting - Drilling depth setting - Piece counter - Spindle stop (automatically stops the spindle after the drilling cycle) - Free cutting time mode - Chip breaking mode(option, price on request) - Jump switch mode, for efficient drilling of square tubes (option, price on request) Njdpfexcg D Esx Ahfslf Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off; programmable; easy operation Drilling cross with pushbutton for feed on/off switching Optional transparent or black protective hood (stock machine transparent) LED lighting as standard OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: excellent (used), Caser radial drill mod. F50-1250 complete with cube Nsdpfxsv Hngmo Ahfelf

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm Nljdpfx Aszmixmehfef feed ja m/min weight of the machine ca. 1,1 t

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. Nedpfxsh Ek H Se Ahfslf The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 13616, Offer 26182 Technical data: - Drilling capacity in steel ST 60 approx. 75 mm - Drilling capacity for enlarging holes approx. 90 mm - Thread cutting up to approx. M 60 - Drill spindle mount MK 5 Nedpeztp Diofx Ahfjlf - Drill spindle stroke 380 mm - Overhang min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the arm approx. 1380 mm - Min. / max. distance: - Spindle - base plate approx. 370 - 1750 mm - Base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feed rates 0.09 - 0.75 m/rev - Drill spindle drive 400 V / 10 kW - E - Central clamping system - Coolant system - T-slot table - Various chucks + drills - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 8000 kg

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, We are offering this ready-to-use, "DIY" multi-spindle drilling machine, manufactured in 2014. Manufacturer: DIY, pneumatic Overall width: 3200mm Connection: 3-phase Model: See image Njdjznlypepfx Ahfjlf Year of manufacture: 2014 Condition: ready for use Category ID: 137 Type: Multi-spindle drilling machine If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, spindle mount: MK 2, quill stroke: 120 mm, Equipment: type plate available, Gillardon pillar drilling machine Manufacturer: Maschinenfabrik Wilhelm Gillardon II, Bretten i. Baden According to the information on the attached nameplate, the drilling machine is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor Three-phase asynchronous motor, type KPER 80 K 4 VEM Motors Thurm GmbH, D Zwickau 3 speed ranges via belt drive. Pinole stroke approx. 120 mm, drilling spindle with Morse taper 2, weight approx. 150 kg / approx. 1380 RPM MK2 drilling column Power consumption 0.75 kW, mains connection 380 volts, 50 Hz. Good used condition Nameplate present An inspection of the bench drilling machine while it is powered on is possible after prior appointment. Nlodpfx Ahjh N Svlofef Price negotiable Our asking price is €390 net ex works, plus packaging costs. All technical specifications are subject to typographical errors/mistakes. Sale exclusively within EU countries.

Condition: used, High-performance drilling machine ALZMETALL, type Abomat 20 Production drilling machine Serial No. 452, Year of manufacture 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle mount: SK 40 - M16 Overhang: 280 mm Drill slide stroke: 500 mm Distance from spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, infinitely variable Drill slide feed: 20 - 224 mm/min, infinitely variable Drill slide rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Nljdpfx Ahjikrtqjfef Drill spindle motor power: 1.1 kW (speed 1000 rpm) Mains connection: 400 volts, 50 Hz - Spindle speed infinitely variable via frequency inverter - Drill slide feed infinitely variable via frequency inverter - 2 operating modes: setup and automatic operation - Central lubrication - Control cabinet on the back of the machine - Swiveling control panel - Mounted on a steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement L x W x H: 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Condition: used, Year of construction: 2011, total width: 1,500 mm, total length: 3,000 mm, total height: 1,750 mm, Colour: White Empty weight: 450 kg - Year: 2011 - Documentation available: No - CE certificate present: No - Serial number: 11060282 - Main motor power [kW]: 1.3 - Table length [mm]: 2000 - Table width [mm]: 520 - Max. drilling stroke [mm]: 60 - Number of spindles [pcs]: 27 - Spindle speed: Manual - Min. spindle speed [rpm]: 2820 - Max. spindle speed [rpm]: 2820 - Distance between spindles [mm]: 30 - Workpiece clamps [pcs]: 10 - Workpiece support/Guide: Traverses - Drills included: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3000mm x 1500mm x 1750mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Njdpfxjzizqgs Ahfjlf VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet Nodpor U St Usfx Ahfolf - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition Nsdpfxju Tln Ns Ahfelf

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Nlsdpoiy Ekvefx Ahfof Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 Nsdpfxohik Ezs Ahfjlf - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition