Pillar Drilling Machine

INFRAETIREA ORADEA G 16

Condition: new, welding current max. 250 A open-circuit voltage max. 66 Volt connected load frequency 400 V weight 65 kg Dimensions (LxWxH) 900 x 500 x 750 mm Fsdpfx Aijy Aa Itokopp MIG/MAG gas-shielded welding machine: incl. 3m hose package.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg Fpjdpfx Aiez Dtxcokop

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg Fsdpfxsu Et Nbj Aikspp - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Model: LP100 Year 2009 Type: Self-aligning/Self-centering Fsdpfx Aelffdysikjpp Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Wheel width: 235mm Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V They have manual and Ce.

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle Fsdozrmk Rjpfx Aikopp at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: good (used), NHH lathe Type: 1N611N Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Fodpfjqgdkisx Aikjpp Turning lenght: 600 mm Digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Fjdpfx Aiovqbdyskspp Technical data: - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing system - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Condition: used, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 6,900 mm, fork length: 1,200 mm, total length: 5,920 mm, - Max. Tragkraft 3000 kg - Max. Hubhöhe 6.90 m - Maximale seitliche Reichweite 4 m - Kippwinkel 11 ° Fpjdsxd E N Aspfx Aikop - Schüttwinkel 116 ° - Wenderadius (über Räder) 3.33 m - Getriebetyp Hydrostatisch - Standard Bereifung ALLIANCE 380/75 R20 148A8 A580 - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 24.90 km/h - Festellbremse Hydraulik - Lenkräder (vorne / hinten) 4 / 4 - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Heben 9.42 s - Senken 7.53 s - Teleskop ausfahren 7.43 s - Teleskop Einfahren 9.36 s - Ankippen 3.21 s - Auskippen 2.15 s - Motornorm Stage V - Motor Modell V3307-CR-TE5B - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm - Nennleistung Verbrennungsmotor - Leistung (kW) 55.92 kW / 54.60 kW - Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm - Zugkraft 3860 daN - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 24.90 km/h - Festellbremse Hydraulik - Pumpenart Zahnradpumpe - Hydraulikfördermenge / Hydraulikdruck 88 l/min / 245 bar - Motoröl 11 l - Hydrauliköl 115 l - Fassungsvermögen des Kraftstofftanks 90 l - Geräuschpegel im Fahrerstand (LpA) 74 dB - Umgebungsgeräusch (LwA) 103 dB - Schwingungsbelastung Hand/Arm < 2.50 m/s² - Lenkräder (vorne / hinten) 4 / 4

Condition: new, table length 2000 mm table width 1000 mm table height 920 - 1000 mm weight of the machine ca. 0,45 t Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Height adjustable from approx. 920 - 1000mm Ribbed bottom for reinforcement. including floor storage Accessories optional!! Fodsvn Uycopfx Aikspp Accessories shown are optional!!

Condition: good (used), Year of construction: 1990, 1 x L+Z Lathe Harrison M 250 Year of manufacture: approx. 1990 Well-maintained machine from a small toolmaking workshop. Technical specifications: Centre height: 145 mm Centre distance: 500 mm Swing over bed: 280 mm Spindle bore: 35 mm Spindle speeds: 80 - 3,000 rpm Feeds: longitudinal: 0.012 - 0.4 mm/rev cross: 0.006 - 0.2 mm/rev Fedpfx Ajx Utc Isikepp Tailstock: Taper: MK 3 Accessories: 1 x 3-jaw chuck 125 mm UVA 1 x faceplate 1 x Multifix A quick-change toolpost with 4 tool holders 2 x revolving tailstocks 1 x fixed centre for tailstock 1 x fixed centre for spindle 1 x drill chuck 1 - 13 mm Operating manual in English Various turning tools Hand tools The machine can be inspected under power.