Used Leake Detector for sale (1,020)

Condition: used, CTS Type: CS-70/900 CTS climate testing chamber with Feuchet water cooling (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98 % RH Redpjziiztefx Akiech Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, rated current: 35.7 A Climate testing chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality Rcedpfjziiz Hox Akijh test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3).   Technical details   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A   Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulators, water-cooled Climate chamber 110 m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulators – i.e., a modular climate chamber that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's site. This allows for uncomplicated retrofitting (more depth or additional modules) as well as later relocation. Technical data of the climate chamber: Manufacturer: RS-Simulators Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in the front chamber door, heated 1x (1260 x 1000 mm) in the left side wall, heated Temperature range: -40°C to +120°C Rcsdezizldjpfx Akieh Time deviation: ± 0.8K – 1.5K according to DIN 50011 with empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500 kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VT³ 4100 Water-cooled temperature test chamber S!MCON/ (with touch panel) Features of this controller: Color touchscreen with intuitive menu (usually 5.7" or larger) Programming of temperature/humidity profiles with ramps and dwell times Data acquisition & logging (e.g., temperature profile, alarms) USB port for data export (CSV, optionally S!MPATI-compatible) Network interface (Ethernet) for remote monitoring and control User management with password protection Interfaces: Potential-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical data (temperature test chamber) Rcsdpfeziyxpex Akioh Test volume: 990 liters Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation within the chamber: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat dissipation capacity (max): 4500 W Calibration values: +23 °C and +80 °C Internal dimensions (W×D×H): 1100 × 950 × 950 mm External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The test chamber is equipped with feedthroughs on the left and right sides. These allow measurement cables and testing equipment to be placed in the test chamber. 1 x L1 NW 50 mm 1 x R1 NW 125 mm 3 x R1 NW 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant R452A Weight: 920 kg For your security as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Temperature Shock Chamber / Shock Test Chamber Vötsch VT 7012 S2 Temperature Shock Chamber Two-chamber system for rapid temperature changes from -80 °C to +220 °C Water-cooled version with a mobile cart and programmable controller For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH. The system is suitable for temperature shock and temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The test chamber operates with a hot and a cold chamber. The test specimen is moved between the two temperature zones using a mobile cart. The system has an observation window, test chamber lighting, and a programmable controller. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Device type: Temperature shock chamber / Shock test chamber Version: Two-chamber system / water-cooled Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -80 °C to +70 °C Temperature deviation (time): ±1.0 K Temperature deviation (spatial): ±2.0 K Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min Test chamber volume: approx. 125 liters Test chamber dimensions: 470 × 410 × 650 mm (W × H × D) Max. load capacity, mobile cart: 40 kg Max. total load capacity, mobile cart: 20 kg Pipe connection: Ø 67 mm Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.1 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW Cooling water supply: Inlet pressure: 3 to 6 bar Differential pressure, inlet and outlet: ≥2.5 bar Water connection: R 3/4" internal thread Dimensions: External dimensions: approx. 975 × 2,115 × 1,675 mm (W × D × H) Weight: approx. 1,000 kg Equipment: Two-chamber temperature shock system Hot chamber Cold chamber Motor-driven mobile cart Programmable controller Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Pipe connection Ø 67 mm Water-cooled refrigeration system Signal light Control terminal Accessories as shown in the pictures Application areas: Temperature shock testing Temperature cycling testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Vötsch VT 7012 S2 Temperature Shock Chamber Control terminal Original operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items not explicitly mentioned in the photos are not part of the sale. Rjdez Ehrgspfx Akiech Shipping or forwarding possible. Subject to changes, errors and prior sale. We are happy to answer further questions by phone.

Condition: used, Stäubli Type: Stäubli Robot RX160 and CS8C controller with handheld device, software, and PC. Measuring Robot Measuring robotics for measuring, analyzing, and evaluating quality characteristics. RobFlow (measuring robotics software) Full version and dongle on an integrated Siemens industrial PC. 6AG4114-1NC22-4EX0 Laser Distance Sensor Model ILR 1181-30 Technical Data: Measuring range 0.1 … 50 m on natural, diffusely reflecting surfaces, 50 m up to a maximum of 150 m on a reflector panel. Linearity ±2 mm (+15°C … +30°C), ±5 mm (-10°C … +50°C) Resolution 0.1 mm Repeatability ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at a distance of 10 m Beam diameter < 35 mm at a distance of 50 m Beam diameter < 65 mm at a distance of 100 m Laser divergence 0.6 mrad Operating temperature -10°C … +50°C Storage temperature -20°C … +70°C Applications: Rjdpfszdyt Ajx Akioch RobFlow is a modular system. The scope of functions of the standard package can be expanded with additional plugins for specific tasks and customer-specific extensions. With the available functions, the following applications can be implemented, for example: Infotainment testing: Optical and haptic tests Individual operations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column testing: Haptic tests along complex paths Large measuring range thanks to a multi-calibrated force/torque sensor Easy to program thanks to RobFlow Air vent end-of-line testing: Haptic and optical tests Interchangeable test adapters for a variety of devices Automatic testing, evaluation, and labeling including integrated leak test Vehicle seat testing: Functional and haptic tests Headrest distance measurements Comfort and stiffness assessments Service life and fatigue tests The advantages of RobFlow at a glance: User-friendly operation No programming language skills required Variable and dynamic test sequences Branching sequence control Easy exchange of test programs between development and production Extensive analysis and evaluation functions Graphical measurement data display and report generation Flexible and expandable through plug-in architecture Stäubli Robot RX160 with 379 operating hours Controller CS8C RX160 Lifting capacity (nominal load - kg) 20 kg and handheld device SP1 Total weight 500 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Scanlab PowerScanII 50i Aperture 50 mm Angle encoder, galvanometer scanner, analog position detector Optics, wavelength ranges (standard): 9400 nm, 10600 nm Max. laser power: 2500 W @ 9400 nm, 10600 nm Typical deflection angle: ±0.35 rad (optical) Dynamics, number of installed tunings: 1 Typical tuning: Fast-Vector-Tuning Settling time: < 0.45 ms Positioning speed (f = 160 mm): 20 rad/s Step response (100% full scale) 1% full scale: 1.0 ms 10% full scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position resolution (max.)*: 18 bits for XY, Rodpfx Akozikcfjijch 16 bits for Z * Non-linearity: < 2.1 mrad / 44° 8-hour drift (after 30 min) Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner Digital controller card Control interface (alternatives): digital SL2-100 Extended diagnostics: yes (iDRIVE) Supply voltage (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan axes: 3-axis system with integrated varioSCAN Housing versions: scan head Connector positions: relative to beam exit Weight without lens (standard housing): 35 kg Size (L x W x H) (standard housing) (433 x 268 x 266) mm³ (with varioSCAN) Beam offset: 72.72 mm Other features Water cooling: yes Air cooling: yes Other specifications Operating temperature: 25 °C ± 10 °C Deviation of deflection angle: < 5 mrad Deviation from zero position: < 5 mrad Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Shipping & Collection: Secure shipping on a pallet (by arrangement) or collection on site is possible. We will be happy to answer any further questions you may have by telephone.

Condition: new, Thermo Scientific Multiskan FC Microplate Photometer 357 with Incubator A wide range of applications, from enzyme kinetic studies to Lowry assays The Multiskan FC covers a wavelength range of 340 to 850 nm, enabling many different applications, starting from enzyme kinetic studies to Lowry assays. The device performs fast and accurate measurements. For example, a complete measurement of a 96-well plate is possible in less than seven seconds. The device is equipped with a linear shaker as standard. A model with an incubator reaches incubation temperatures of up to 50 °C and is capable of reading 384-well microplates. The SkanIt software supports the optimal use of the device through a visual workflow, effortless data analysis, and export functions. Features In addition to the common features of all microplate readers, the Multiskan FC offers: SkanIt Software The SkanIt software can be used to control the Multiskan FC and supports the optimal use of the device functions with a visual workflow, simple data analysis, and export functions. Wide Wavelength Range A wavelength range of 340 to 850 nm for a variety of applications such as ELISA immunoassays, protein quantification, endotoxin, cytotoxicity and proliferation assays, enzyme assays and growth curves. Pre-installed Filters Equipped with a filter wheel with eight positions and three standard filters, 405, 450 and 620 nm. Additional filters are easy to install and can be ordered. Proven Performance and Reliable Results Integrated self-diagnosis functions, IQ/OQ and verification aids make this device reliable and trustworthy. Specifications Compatibility: Robotic Detector Type: Photodetector Incubator Temperature: Room temperature +4 °C to 50 °C Interface: User: Integrated or via PC Rodpfx Akott R Syoiech Light Source: Quartz glass halogen lamp Measurement Speed: 7 s for 96-well plate (fast mode), 13 s for 96-well plate (normal mode) Measurement Technique: Absorption Plate Type: 96-well plate, 384-well plate Product Line: Multiskan™ Shaking: Linear Software Type: SkanIt Software Wavelength Selection: Filter Accuracy: ± 1% (0 to 3 Abs) or ± 0.003 Abs. The larger value at 405 nm applies. Depth (US): 15.7 in. Depth (metric): 40 cm Filter: Filter wheel with eight slots; installed filters: 405 nm, 450 nm and 620 nm Height (US): 8.7 inches Height (metric): 22 cm Hertz: 50/60 Hz Linearity: 96-well plate: 0 to 3 Abs, ±2% at 405 nm 384-well plate: 0 to 2.5 Abs ±2% at 405 nm Precision: CV ≤ 0.2% (0.3 to 3 Abs) at 405 nm Resolution: 0.001 Abs Voltage: 100/240 V Wavelength Range: 340 to 850 nm Width (US): 11.4 inches Width (metric): 29 cm Unit Size: Each More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: used, mileage: 49,905 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263269 Previous non-binding recommended retail price from the automotive manufacturer: 85,917 € 1st owner, fully serviced according to service schedule, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter package * Electric auxiliary heater * Charging package, instrument panel * Loading compartment package 2 * Smoker's package ASSISTANCE SYSTEMS * Mercedes-Benz emergency call system * Breakdown assistance * ECO start-stop function * Cruise control (TEMPOMAT) * Headlamp assist * Rain sensor * ATTENTION ASSIST * HOLD function * Active brake assist * Blind spot assist * Traffic sign assist * Active lane keeping assist * Parking package with reversing camera * Crosswind assist ENGINE, TRANSMISSION & CHASSIS * 9G-TRONIC AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * Communication module (LTE) for digital services Rodpfx Akoztuhteiech * MBUX multimedia system INTERIOR * Coat hooks in the driver's cab * Interior light(s) in the driver's and front passenger cabin with door contact * Lashing rails on the side wall at the roof frame * Loading compartment lighting via motion detector * Grab handles for driver and front passenger entry * Grab handle for entry in the sliding door of the loading compartment on the partition wall * Semi-automatic climate control system TEMPMATIC * USB socket 5 V * Entry handle on the rear left corner pillar * Climate zone 1 (cold/comfort) * Entry handle on the rear right corner pillar * Wooden flooring * Lashing rails on the side wall at the sill * Multifunction steering wheel * Seat heating for driver * Seat heating for front passenger * Load securing rail system * Storage compartment above the windshield * Electrical pre-installation, configurable special module * Fabric Maturin black * Cup holders in the front * LED light strip in the loading compartment * Comfort roof control unit * Airbag, driver * Airbag, front passenger * Comfort driver's seat * Front passenger seat, two-seater * Comfort headrest, driver * Partition, full height * Speedometer km/h * Steering wheel adjustable for tilt and height * Leather steering wheel * Cable duct on the side wall * Storage compartment under the cockpit * Cable duct on the rear portal LIGHTS & VISIBILITY * 3rd brake light * Adaptive brake lights TECHNOLOGY & SAFETY * Hill start assist * Parking brake, electric * Jump start contact * Seatbelt warning system for front passenger seat * Seatbelt warning system for driver seat * Outside temperature display * Seat occupancy recognition, driver's seat * Anti-theft alarm system EXTERIOR * Rear doors, double-leaf, opening to the side * High roof * WET WIPER SYSTEM * Step, rear door * Sliding door, right * Side marker lights * Exterior mirrors, electrically foldable * Heat-insulating glass with band filter on the windshield * Exterior mirrors, heated and electrically adjustable * Towing eye, rear * Acoustic package * Interior paneling of the loading compartment up to roof height (wood) OTHER EQUIPMENT * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * No uprating/downrating to 3,500 kg * Panel van * 3.5 tonne * Wheel arch suitable for loading * AGM battery 12 V 92 Ah * Step lights * Front axle with increased load capacity * Electrical system for trailer socket * Additional structural modifications * Generator 14 V / 250 A * Signage / printed materials in German * Basic * Noise reduction measures * Vibration dampers * Vehicle suitable for HVO * Head unit Europe/CIS/Mongolia

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). OilQuick OQ70-55 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €4,190.00 net / €4,986.10 gross A drawing of the hole pattern is available in the photos. - 2x 1/2" coupling - 2x 3/4" Poly couplings - 2x 1" coupling - Also available from stock with leak oil line coupling! Additional charge: €440.00 net - Excavator class: 18 to 32 tons - Weight: 302 kg Suitable for many attachments such as hydraulic breakers, sorting grabs, and also for the following Westtech products: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leak oil line) - Westtech CS580 (requires leak oil line) - Westtech CS780 (requires leak oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products are also in stock and immediately available! We have many more OilQuick adapter plates in stock for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Financing offers available on request. We are official sales and service partners of: - OilQuick - Holp - Gierking GMT - Weber MT - Westtech - DMS - Seppi M. - Magni Telescopic Handlers - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. Rcedpfx Aoyl Hgyskieh We supply the complete OilQuick range! Errors and prior sale excepted! = Additional Information = Application: Construction Please contact Marius Herden for more information.

Condition: refurbished (used), functionality: fully functional, pump pressure: 400 bar, This excellently maintained Agilent 1100 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent Service Engineers. The last maintenance was performed in July 2026, during which the system successfully passed the inspection. Configuration: Rodszzdxqspfx Akisch Agilent 1100 Solvent Tray Agilent 1100 Vacuum Degasser G1322A Agilent 1100 Quaternary Pump G1311A Agilent 1100 Standard Autosampler G1329A Agilent 1100 Thermostated Column Compartment G1316A Agilent 1100 Variable Wavelength Detector (VWD) G1314A Agilent 1100 Controller G1323B 3-month warranty 3-month warranty

Condition: used, mileage: 142,500 km, power: 125 kW (169.95 HP), color: white, gearing type: automatic, Equipment: ABS, air conditioning, central locking, power assisted steering, - Tel: , Mr. Kiel will be happy to assist you. To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. A50 front axle with increased load capacity, AR2 axle ratio i = 3.923, BA3 active brake assist, BH1 hold function, C6L multi-function steering wheel, CB7 stability level I, CL1 steering wheel adjustable in inclination and height, CT1 vibration damper, CW2 deletion of vehicle lowering function, D03 high roof, D50 full partition, E07 hill start assist, E1D digital radio (DAB), E1E navigation, E1U USB socket 5 V, E46 socket in the cab, E57 electrical system for trailer socket, E7M MBUX multimedia system, ED4 fleece battery 12 V 92 Ah, ED8 pre-installation of electrical system, parameterizable special module, EE5 ultracapacitor, automatic transmission interlock, ES0 jump start contact, ES5 charging package instrument panel, EW6 pre-installation for Remote Services Plus, EY2 live traffic information, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F1K coat hook in the cab, F2W winter package, F64 exterior mirrors electrically foldable, F68 exterior mirrors heated and electrically adjustable, FF5 storage compartment above the windshield, FJ1 folding cover for storage compartment, FJ4 storage compartment under the cockpit, FM3 WET WIPER SYSTEM, FU5 exterior mirrors without indicator, G43 9G-TRONIC, H15 seat heating for front passenger, H16 seat heating for driver, H21 heat-insulating glass with band filter in the windshield, HH9 semi-automatic controlled climate control system TEMPMATIC, IL5 left-hand drive, IR7 wheelbase 4325 mm, overhang 2015 mm, IT4 3.5-ton vehicle, J10 speedometer km/h, J55 seatbelt warning system for front passenger seat, J58 seatbelt warning system for driver's seat, J65 outside temperature display, JA7 blind spot assist, JA8 crosswind assist, JA9 traffic sign assist, JB4 active lane keeping assist, JB7 parking package with reversing camera, JF1 rain sensor, JH3 communication module (LTE) for digital services, JI7 start-up mileage, maintenance interval 60,000 km, JK5 instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 main tank 93 liters, L LEFT-HAND DRIVE, L44 direction indicator lamps on the side at the front, L65 ceiling light(s) in the LD-/FG-area with door contact, L71 cargo area lighting via motion detector, L94 deletion of parking lights, LA2 driving light assistant, LB1 side marker lights, LB5 3rd brake light, LC2 LED light strip in the cargo area, LE1 adaptive brake light, LG7 LED High Performance headlights, LX5 Europe, M60 generator 14 V / 250 A, M72 vehicle HVO compatible, MJ8 ECO start/stop function, MS1 TEMPOMAT (cruise control), MT5 EMISSIONS CLASS EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, P2L cargo area package 2, Q11 longitudinal member reinforcement, Q67 towing eye rear, RY2 tire pressure monitoring on front and rear axle, wireless, S02 driver's seat, S23 passenger seat (two-seater), SA5 airbag driver, SA6 airbag passenger, SK2 seat occupancy detection driver's seat, T16 sliding door right, T75 grab handles for entry for driver and passenger, T77 grab handle entry cargo area sliding door at partition, T85 entry handle on rear corner post left, T86 entry handle on rear corner post right, V42 lashing rails on side wall at the partition, V43 wooden floor, V52 wheel arches loadable, V94 cable duct on side wall, V95 cable duct on rear portal, VA2 interior panelling of cargo area up to roof height (wood Rjdpfe Agd Sujx Akioch

Condition: new, mileage: 100 km, power: 500 kW (679.81 HP), empty load weight: 7,100 kg, maximum load weight: 19,000 kg, axle configuration: 1 axle, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, load capacity: 11,900 kg, Equipment: Bluetooth, air conditioning, central locking, cruise control, onboard computer, rear view camera, • Reversing camera • GPS • Camera-based mirrors • Keyless start • Bunk • CARPLAY & Android Auto • LED daytime running lights • Automatic headlights and wipers • 540L fuel tank • Fog lights • Differential lock • Bluetooth • Air conditioning • Cruise control and speed limiter • Heated seat Rodpo Af Uawofx Akiech • Blind spot detector • Lane keeping assist • Traffic sign recognition • Webasto

Condition: used, Vötsch Type: VT 7011 Heraeus Vötsch temperature control cabinet, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Rjdpfxszdtd Ij Akijch Temperature gradient: 1 to 3 K Cooling rate: 3.2 K/min Heating rate: 3.5 K/min Refrigerant: R-404 A / R 23 Voltage: 1/N/PE AC 230V ±10%, 50Hz Rated power: 1.8 kW Rated current: 12 A For your security as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: VT³ 4150/S Redoziyvujpfx Akijch Vötsch temperature testing chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min. Rate of change: Heating approx. 4 K/min. Temperature testing Temperature range: -40°C to +180°C Layout External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 180398, clamping force: 1,200 kN, screw diameter: 35 mm, injection weight: 186 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Redpfxjzx Uc Is Akijch

Condition: used, This listing is for a Sysmex CA-50 Automated blood coagulation analyzer The CA 50 has 4-detector channel allowing random analysis of up to four different parameters in single or duplicate mode, providing convenience in coagulation screening. Reagent consumption is half of the manual method. Rsdpfx Aexzhcgekioch

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) Redoxlknmspfx Akijch • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: excellent (used), Year of construction: 2017, Stephan micro cut model MCH20FS with a ceia metal detector Rcjdpfxsufylas Akish

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Redpezz Afisfx Akijch Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: used, mileage: 113,900 km, power: 375 kW (509.86 HP), first registration: 11/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, electronic stability program (ESP), parking heater, Trailing axle can be lifted. * Fully maintained according to service schedule ----Palfinger roll-off tipper, type PH T20 SLD 5, lifting capacity 20,000 kg, suitable for containers up to 7,000 mm, radio remote control, hydraulic internal locking, hydraulic underrun protection. ----* Additional cab insulation * 12-speed automatic transmission * Load/axle load display in the instrument panel * VEB+ (Volvo Engine Brake+) * Differential lock, rear axle * Air-suspended rear axle * Duomatik brake connection * Electronic Stability Program (ESP) * Disc brakes * Smoke detector in the cab * Roof window and emergency exit can be opened electrically * Adaptive Cruise Control (ACC), collision warning + emergency braking function * Lane Keeping Assist (LSS-DW) * Globetrotter cab * Storage compartments above the bunk * Exterior sun visor, transparent * Electrically adjustable and heated exterior mirrors * Cool box in the cab * Rain sensor * Electric window lifts for driver and passenger doors * Air-suspended cab mounting * Leather steering wheel * Rearview mirror with close-range camera on the passenger side * Central locking with remote control * Immobilizer (transponder) * Volvo I-Shift transmission * Automatic climate control * Auxiliary heater * Heated driver's seat Rcjdpfx Ajzztawekish * Volvo I-ParkCool (integrated auxiliary air conditioning) * Engine: 6-cylinder * Volvo I-See with map-based topographical information * Telematics gateway with 4G * Reversing camera * Fuel tank: 550 liters * LED headlights * Headlight cleaning system * Engine design: Euro 6 * Engine design with AdBlue * Auxiliary drive * Fifth wheel coupling * Air-suspended driver's seat * Lower bunk * Volvo I-Torque: fuel-optimized cruise control (incl. I-Roll) * Driver comfort package * Steerable and liftable trailing axle * EBS * Without spare wheel ----For sale to businesses only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will be happy to provide you with a leasing or financing offer.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,607 h, Mazak Optiplex Nexus 3015 Fiber 3KW laser cutting machine Manufacturer: Mazak Type: Optiplex Nexus 3015 Fiber 3KW Year of manufacture: 2017 Condition: Very good, operational Operating hours: Laser: 11,282 hours Beam: 5,607 hours Power: 3KW CNC control: MAZATROL PREVIEW 3 Weight: 15,500 kg Dimensions: 8,490 mm x 3,485 mm x 2,010 mm Axis travel: 3,100 mm x 1,580 mm x 110 mm GENERAL MACHINE OPTIONS - Automatic calibration system - Focus position adjustment - Nozzle cleaning brush - Collection container for material scrap Rsdpozza Hkofx Akioch - Transformer for the European market - Protection window for multi-control cutting head - Programming function on the control panel via fixed programs - Cutting table layer detection - 1 set of adjustment tools - Machine feet / leveling shoes - Non-contact height measurement with repeat function - Manual workpiece clamping - Preparation for 3kW resonator - Additional selector switch for cutting gas - NC monitoring for protective gas pressure - Machine status indicator light - Support grid (distance between struts 100mm) will be newly installed - Preparation for dust extraction system - Work area lighting - Machine with CE marking - Automatic shutdown via circuit breaker activation - 2-position pallet changer - NC repeat function - Relocation detector - Mazatrol Preview 3 control - 15" Xga Color TFT monitor - LAN interface - USB interface for PC Special equipment - Automatic nozzle changer magazine with 8 positions - Intelligent monitoring + focus point detection - Extraction system for laser cutting machine Donaldson DFPRO4 Scope of delivery - Set of manuals in electronic form on CD - NOZZLES will all be included / customer cannot use these on the new machine - Lens for multi-control cutting head - Multi-control cutting head - 3rd auxiliary gas line (30 bar)

Year of construction: 2012, condition: used, Technical details: Number of working hours: ca. 700 h number: Rotormesserhalter: 5 number: Stattormesserhalter: 4 Rotor-Ø: 440 mm material: PET control voltage: 24 VDC kW Cutting mill (shredder) The plastic granulator is intended for industrial use. Application: Size reduction of all kinds of plastics, such as ABS, POM, PA6, PE, PP, PG and PET Plant consists of a granulator with belts and a bottle bunker. Material is fed into the bunker via feeding belt Hopper 20M2 V2A complete with gear motor 7,5 kW, The screw conveyor is activated by the control system of the granulator. Bucket volume approx. 20 m³, HxWxD: 4400x3300x3300mm, weight approx. 27,0 to, Bunker with discharge unit CentriCut 44SR granulator 55 kW, granulator 55 kW (50Hz, 400Volt) and feed screw 55 kW (50Hz, 400Volt) Grinding chamber: rotor knife length 272mm, weight approx. 2.0 to Conveyor belt NT9, belt length 3500mm, useful belt width 416mm, (guide profile height 60mm, driving bar height 60mm, driving bar distance approx. 500mm) total length 3550mm, total width 780mm, total height 2350mm, weight 250kg Rcsdpou Nw Ebofx Akish Sound insulation LxWxH: 2700x2300x2500mm, weight 1,3 to Tunnel detector 600 is integrated into the CentriCut cutting mill on the control side, scanning side 600mm, passage width 840mm, passage height 400mm, weight approx. 150kg The plant is ready for transport and for sale. i.D. *

Condition: used, Vötsch Temperature shock test chamber / Shock test chamber Vötsch VT 7012 S2 temperature shock test chamber Two-chamber system for rapid temperature changes from -74 °C to +220 °C Water-cooled version with mobile cart and programmable control   For sale is a used temperature shock test chamber from the manufacturer Vötsch Industrietechnik GmbH.   The system is suitable for temperature shock and temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests.   The test chamber operates with a hot and a cold chamber. Redpfx Ajz Ehuujkijch The test specimen is moved between the two temperature zones via a mobile cart. The system features an observation window, test chamber lighting and programmable control.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Equipment type: Temperature shock test chamber / Shock test chamber Version: Two-chamber system / water-cooled   Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -74 °C to +70 °C Temperature deviation over time: ±1.0 K Temperature deviation spatially: ±2.0 K   Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min   Test chamber volume: approx. 125 liters Test chamber dimensions: 470 × 410 × 650 mm (W × H × D) Max. load capacity, mobile cart: 40 kg Max. total load capacity, mobile cart: 20 kg Pipe passage: Ø 67 mm   Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 1.1 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g   Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW   Cooling water supply: Inlet pressure: 3 to 6 bar Differential pressure, inlet and outlet: ≥2.5 bar Water connection: R 3/4" internal thread   Dimensions: External dimensions: approx. 975 × 2,115 × 1,675 mm (W × D × H) Weight: approx. 1,000 kg   Equipment:   Two-chamber temperature shock system Hot chamber Cold chamber Motorized mobile cart Programmable control Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Pipe passage Ø 67 mm Water-cooled refrigeration unit Signal light Operator terminal Accessories according to images   Application areas:   Temperature shock testing Temperature cycling testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests   Condition:   Used Optical condition according to images   Scope of delivery:   1x Vötsch VT 7012 S2 temperature shock test chamber Operator terminal Original operating manual Accessories according to images   Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   The table shown in the photos or any other items not expressly mentioned are not included in the sale.   Shipping or freight forwarding possible. Subject to changes, errors and prior sale.   We wi

Condition: used, Weiss Type: WT3-600/70/5 Weiss temperature testing cabinet WT3-600/70/5 water-cooled version with S!MCON / 32 control system and touch panel Control panel "Touch Panel" By simply touching the function symbols on the "Touch Panel" control panel, all control and operating commands can be activated. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing cabinet is equipped with adjustable feet. Feedthroughs The testing cabinet is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber. Feedthroughs installed as standard: R1: DN 125 mm L1: DN 50 mm Test chamber volume: approx. 600 liters External dimensions including hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions excluding hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Data for temperature tests: Temperature range: -70 °C to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Redpoy Nibpofx Akijch Temperature change rate (according to IEC 60068-3-5): Heating: 7.5 K/min Cooling: 7.5 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: approx. 23 A Rated power: approx. 13 kW On-site fuse protection: 16 A slow-blow Sound pressure level: Measured at a distance of 1 m in front / 1 m height: approx. 58 dB(A) Refrigerant: R-404A / R23 Weight: approx. 620 kg For your safety as a buyer, here is the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.