Used Leake Detector for sale (972)

Condition: used, This listing is for ATI Porta Sens 11 Gas leak detector The unit is in full working condition and ready for immediate use. Reliable handheld gas monitor designed for efficient leak checks across laboratory facilities. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility Chedoxv Dh Ijpfx Ac Teb • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Leak test device/pressure test device for ventilation ducts Manufacturer: Airflow UK Type: LM 1 Serial number: 125674 4 meters of hose Chjdpfx Acjcxb Has Tob 230 Volts Documentation available

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Codpfx Aexhfqbec Tjhb Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Condition: used, Helium Leak Detector Manufacturer: Pfeiffer Type: HLT 260 Chsdpfxjc S D A To Ac Tsb Condition: Tested and ready for use Connection: 230V Delivery time: in stock (subject to prior sale)

Condition: used, Year of construction: 2018, functionality: fully functional, Helium leak detection device. Chedpfx Aeyt Sm Uoc Tsb

Condition: used, Ref: MM6192 Safeline Signature metal detector with pneumatic push-arm reject system into a lockable bin. Cedpfox Emkyox Ac Tjhb This unit is fitted with a full retail kit so meets all retail specifications. Model - Signature 30H. Serial number - 11410. Aperture dimensions - 360mm wide x 120mm high. Belt dimensions - 2000mm long x 300mm wide. Electric supply - 3 phase.

Condition: excellent (used), Year of construction: 2016, Loma Systems Metal Detector with Rejector Model: IQ³ Chodpov T Ah Eefx Ac Tsb Model conveyor: MD Conveyor, serial number: G7B3C2RS-35150D Year of construction: 2016 220-240 V, 1 Ph, 50/60 Hz, 3 A Belt width: 300 mm, clearance: 350 mm x 150 mm Total dimensions: 2020 mm x 1080 mm x 1120 mm

Condition: used, Ishida Checkweigher and Metal Detector Cjdpsxtfymefx Ac Tshb Fully stainless steel Reject bin Weighing range - 0 to 1200 grams 240 volts

Condition: excellent (used), Year of construction: 2020, Elektron Metal Detector Aperture 180mm Wide x 405mm High Belt length 1500mm Long Stainless Steel Two run features options - alarm and stop or air reject blast Reject bin Chedpfsvw D Iujx Ac Tjb In excellent condition

Condition: excellent (used), Year of construction: 2012, Lock met 30+ Throat / Vertical Fall Metal Detector The MET 30+ UNIVERSAL compact vertical fall system can be installed at the beginning of the Cedpfeu Dntlex Ac Tjhb production line to inspect materials in bulk powder or granule form or anywhere for free falling products. • Detects real-life contaminants • ATEX zone 21 approved • Throughput up to 50 tonnes per hour • Quick release sealed valve or cowbell reject mechanisms available • Sealed to IP 66 for washdown applications

Condition: good (used), Fortress Phantom Metal Detector Fully stainless steel Aperture 500mm wide x 225mm high 1500mm long Belt Chsdpfextfw Sex Ac Tob Stop and alarm Video available on request

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards. Chodeyq Rkyjpfx Ac Teb

Condition: like new (used), Thermo Scientific metal detector Model: Apex 500 Stainless frame, elevates from 300mm to 950mm, pneumatic blow reject with reject bin, 450mm x 160mm, belt dimensions 3300mm x 320mm, 3Ph, mobile Codpfx Acjfiud Ee Tehb

Condition: excellent (used), Goring Kerr Metal detector Model: DSP2 Cjdegmtiaopfx Ac Tshb Stainless frame, belt dimension 2400mm x 200mm, aperture 300mm x 100mm, pneumatic blow reject into reject bin, 3Ph

Condition: like new (used), Cintex Metal detector Codpfxogpqqxs Ac Tehb Model: Sentry Stainless frame, belt dimensions 900mm x 150mm, aperture 220mm x 85mm, pneumatic blow reject into reject bin, with alarm, 3Ph

Condition: good (used), Lock Metal detector Stainless, belt dimensions 1500mm x 500mm, aperture 530mm x 100mm, Password 1111, stop / start with alarm, 3Ph Chsdpfx Acsyhhxie Teb

Condition: good (used), Cintex CS4000 Metal detector checkweigher Stainless, combination metal detector checkweigher, belt dimensions 2100mm x 150mm, aperture 220mm x 100mm, weigh platform 350mm x 150mm, weight range 20g to 1Kg, pneumatic blow reject into reject bins, with spare belts, 1Ph Cjdpfx Acjwvbuze Tjhb

Condition: like new (used), Fortress Stealth metal detector with star flex checkwigher. Aperture 400 x 110mm. fully rebuilt. Twin push arm rejects into lockable bins. Video on request. very tidy machine. Chjdpfxex Syn Eo Ac Tjb

Condition: ready for operation (used), A spare front panel display for a Boekels Discovery C metal Detector - tested and working Cedpezpy E Nofx Ac Tshb

Year of construction: 2001, condition: like new (used), machine/vehicle number: ECB1101424575, metal detector checkweigher Chjdpfxsdwhkms Ac Tsb 2001, stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins

Year of construction: 2025, condition: new, functionality: fully functional, Description This is a brand new Ceia THS21ET/3F, manufactured in 2025, it includes a standard manufacturers 12-month warranty. It comes with Three frequency technology which means that the machine will automatically select a suitable frequency for the product. This means far more flexibility of types of products that this detector can run, compared to traditional metal detectors Cedpfxjum I Slo Ac Tohb This machine will be ready to view at the end of September, and will be available immediately from that point to Buy or Rent. Technical Specification Aperture dimensions 550 wide x 350 high Belt stop & alarm reject system Modular belting Variable speed Currently runs right to left but can easily be changed to left to right. Protected reset system

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 x Loma Systems IQ2F / IQ3 twin-head metal detector with alarm and belt stop on detect reject system, mounted on a height-adjustable frame. Manufacturer - Loma Systems Date of manufacture - 2010. Serial number IQ3 standard head - MD301-12429D. Aperture dimensions: IQ2F Ferrous-in-foil head - 370mm wide x 135mm high (105mm useable) / IQ3 standard head - 350mm wide x 150mm high (115mm useable). IQ3 standard head frequency - Variable. Handing - Left to Right. Belt type - rubber. Cjdpey Hinksfx Ac Tjhb Belt dimensions - 2600mm long x 300mm wide.

Condition: excellent (used), functionality: fully functional, TTK FG-SYS wall-mounted digital liquid leak detection and locating panel in a lockable metal enclosure. The unit is designed for continuous monitoring and precise location of conductive liquid leaks, including water, bases and acids, when used with compatible TTK sensing cables. It is suitable for data centres, server rooms, electrical rooms, commercial buildings, industrial facilities and other critical infrastructure. The FG-SYS can identify the location of a leak to approximately 1 metre, detect cable breaks and display alarm information on the integrated LCD screen. It can monitor up to 120 sensing-cable sections across three independent circuits, with a maximum cable length of 600 metres per circuit. Main features Manufacturer: TTK Model: FG-SYS Equipment type: Digital liquid leak detection and location panel Wall-mounted version Integrated LCD display and keypad Three independent sensing circuits Up to 40 sensing-cable sections per circuit Up to 120 sensing-cable sections in total Maximum monitored cable length: 1,800 m total Chsdpfx Acszlixqj Tsb Leak-location accuracy: approximately ±1 m Detection of leaks and sensing-cable breaks Audible and visual alarm indication 30-event alarm and fault history Eight configurable relay contacts Additional power-failure relay RS232 and RS422/RS485 communication JBUS/MODBUS connection for BMS integration Lockable metal enclosure The FG-SYS is compatible with TTK FG-EC and FG-AC digital sensing cables and can also support compatible analogue sensing cables through the appropriate interface boxes

Condition: excellent (used), functionality: fully functional, REF: MM6472 1 x Fortress Phantom metal detector on inclined conveyor belt with alarm and belt stop on detect reject system. Stainless steel frame mounted on height-adjustable feet. Manufacturer - Fortress Technology. Model - Fortress Phantom. Serial number - K-24417-13183. Chsdpfxjzqt Hcs Ac Teb Aperture dimensions - 550mm wide x 295mm high (clearance). Handing - Inclined, Left to Right. Belt type - Modular plastic. Belt dimensions - 1750mm long x 530mm wide. Electrical requirements - 380 V / 50 hz / 3 phase.

Condition: excellent (used), functionality: fully functional, 1 x Cintex Ferrous-in-Foil metal detector mounted on a conveyor belt with retractable belt system into a lockable bin. This metal detector meets full retail specification. Manufacturer – Cintex. Model – Sentry. Cedpfxjyn N Rme Ac Tshb Aperture dimensions - 370mm wide x 105mm high (clearance). Belt dimensions - 300mm wide x 1500mm long. Direction - runs Right to Left. Electrical requirements – 230 V / 50 hz / 1 phase. Full retail specification, features - reject confirmation, reject bin full monitoring, low-air monitoring, electronically lockable bin with bin door open monitoring, backup PEC. Upgraded from an Autosearch 2 and fitted with new conveyor belts, new pressure gauge, received PLC program adjustment and received a full service.