Used Leake Detector for sale (972)

Condition: good (used), Vötsch Type: VTS 7011-5 Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: width 560 mm, depth 350 mm, height 630 mm External dimensions: width 850 mm, depth 1030 mm, height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to 1 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 10 K/min Refrigerant: R-404 A / R 23 Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 7.5 kW Rated current: 13 A Weight: 360 kg For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components Bodpfjzg Tpcjx Ac Tswt 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by telephone.

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. Bodpfozg Tzxox Ac Towt In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), BILWINCO 14-Head Multi-Head Weighing Machine – Stainless Steel BILWINCO 14-head multi-head weighing machine, designed for the automatic, precise, and continuous weighing of food products before dosing and packaging. The equipment uses a multi-head combination weighing system that automatically selects the most suitable combination of hoppers to achieve the target weight of each dose. Its 14-head configuration allows for efficient operation in industrial lines that require precision, repeatability, and continuous feeding. Primarily made of stainless steel, this BILWINCO weighing machine is designed for integration with packaging machines, filling machines, and other automatic dosing systems. MAIN FEATURES -Manufacturer: BILWINCO -Type: Multi-head weigher / combination weigher -Number of heads: 14 -Automatic combination weighing system -Dosing controlled by weight -Multiple weighing hoppers -Automatic product distribution -Continuous industrial operation -Construction primarily in stainless steel -Hygienic design for the food industry -Compact configuration for in-line integration -Designed for automatic feeding of packaging machines -Integrable into existing weighing and packaging lines APPLICATION The BILWINCO 14-head multi-head weighing machine is designed to divide the product among different weighing hoppers and automatically calculate the combination that best approximates the programmed weight. Once the combination is selected, the corresponding hoppers discharge the product to form the required dose, which can be transferred directly to a packaging machine, filling machine, or other downstream equipment. Bwedpfx Aszw D Htec Tet This system allows for an automatic, fast, and repetitive weighing and dosing process, reducing manual intervention. It can be integrated with: Elevators and feeding systems Product conveyors Vertical packaging machines Pouch packaging machines Tray and container filling machines Dosing systems Weight controllers Metal detectors Packaging and end-of-line equipment APPLICATIONS Especially suitable for food industries, frozen food manufacturers, snack producers, vegetable processors, prepared food companies, and packaging companies that require automatic weight-based dosing. Depending on its configuration, it can be used for a wide variety of solid, granular, diced, or portionable products. The combination of BILWINCO technology and 14 weighing heads provides a particularly interesting solution for automatic lines that require precision and continuity in dosing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Bsdpfxszpcvde Ac Tjwt Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: used, Cryogenic gas tank semi-trailer CRYOBASE used for liquid oxygen, nitrogen and argon Bwjdpfxeznb Nyo Ac Tst Capacity: 24 m³ Date of first registration: 29.09.2025 Pump, flow meter, vaporizer, vacuum insulation. New technical inspection (HU), vacuum and leak test. We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: used, Year of construction: 2004, operating hours: 19,000 h, machine/vehicle number: D35601, The Senzani CM5 is a continuously operating, vertical cartoning machine from Senzani Brevetti, specifically designed for the precise packaging of individual items such as capsules, pouches, or smaller packaged products into pre-glued folding cartons. Machine features: Operating principle: Continuous motion for high process stability. Application: Vertical filling of pre-glued cartons, often combined with counting and dosing systems (coffee or tea capsules, lawn seeds, muesli, or pet food). Bwedpfx Acozp Iw Hs Tst Integration: Seamless integration into fully automatic primary and secondary packaging lines is possible. The machine operated for almost 19 years at Flechtorfer Mühle, where it was only used to fill one product. After being taken over by a birdseed company, it successfully completed a test run. Following the sale and a longer period without power, a software update from Senzani is necessary, costing approximately €12,000. A metal detector is included in the offer. A pendulum cup feeder can be purchased separately to ensure consistent feeding.

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm Bwjdpfx Acezk Nmrs Tst - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: like new (used), TECHMI 10-Piston Automatic Filler – Stainless Steel TECHMI automatic filler with 10 pistons, designed for precise and continuous dosing and filling of liquid, semi-liquid, and viscous products in industrial production lines. The machine is equipped with 10 pistons/filling nozzles, allowing multiple containers to be filled simultaneously in each production cycle, offering an efficient solution for medium to high production industrial processes. Bwodpjzwwa Tjfx Ac Tot Primarily manufactured in stainless steel, it incorporates an in-line container conveyor, a protected filling area, and a control panel for the operator. MAIN FEATURES -Manufacturer: TECHMI -Type: Automatic piston filler -Number of filling pistons: 10 -Multi-nozzle configuration -Automatic volumetric filling system -Simultaneous dosing of multiple containers -Integrated container conveyor -Automatic positioning under the nozzles -Stainless steel construction -Closed filling area with safety guards -Integrated control panel / HMI -Adjustable filling system -Designed for continuous industrial production -Integrable into automatic filling and packaging lines APPLICATION The TECHMI filler is designed for automatic volumetric dosing using a 10-piston system. The containers are automatically transported to the filling area and positioned under the nozzles. The piston system dispenses a controlled amount of product into several containers simultaneously before transferring them to the next stage of the line. The piston filling technology is particularly suitable for products that require controlled volumetric dosing, including products with higher viscosity or consistency than those typically processed by gravity filling systems. It can be integrated with: Container feeding systems Bottle and jar conveyors Capping and sealing machines Cap feeders Weight checkers Metal detectors and inspection equipment Labeling and coding equipment Stacking and end-of-line systems APPLICATIONS A solution especially suitable for food manufacturers, sauce and condiment producers, canning companies, and packaging companies that require an automatic multi-head volumetric filling system. Depending on its configuration, it can work with sauces, creams, purees, pastes, jams, tomato-based products, condiments, and other liquid or viscous products. The 10-piston configuration allows for the simultaneous filling of multiple containers, making it particularly interesting for industrial lines that require automated and repetitive dosing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, functionality: limited functionality, Year of construction: 2017, operating hours: 8,041 h, load capacity: 25,000 kg, fuel type: electric, drive type: Elektro, Tractor Condition: Limited operational readiness Technical condition: poor Battery voltage: 80V Description: oil leak from the steering gear Bsdjxlwtcepfx Ac Tswt

Condition: excellent (used), Door opening button, push button, door opener, automatic door sensor -Manufacturer: eao, Opening and presence detectors for railway interior doors, original packaging -Type: RS-1 Hitachi Bwodpfx Acjud Du Ns Tet -Technology: Active Infrared Technical data: see photo -Transport dimensions: 200/140/H40 mm -Weight: 0.1 kg

Condition: good (used), Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing Bjdpfx Aceghh T Uj Tswt -Pipe sealing cushions -Outer diameter: 248 mm -Height: 20 mm -Hole circle: Ø 200/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 10x pillows available -Price: per piece -Weight: 1.1 kg/piece

Condition: good (used), Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings Bwsdsb A Hwcepfx Ac Tjt -Pipe sealing cushions: DN1200 -Diameter: 1200 mm -Dimensions: 1200 x 450 mm -Weight: 200 kg

Condition: good (used), Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings -Pipe sealing cushions: DN1200 -Diameter: 1180 mm -Dimensions: 1180 x 500 mm -Weight: 140 kg Bwjdpfx Aeb A Iuuec Tot

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 50,000 l, Heating oil tank – storage tank – diesel tank – tank system – steel tank brand new – with a capacity of 50,000 liters – according to EN 12285-2 – Class B – (replacement for DIN 6616), above ground, double-walled, including test certificate, suitable for installation in areas of seismic zone 0. The tank has two saddle supports, a manhole with a dome cover, and is equipped with the following fittings: 1 filling pipe with a TW closure (filling cap) and dip tube, 1 gauging pipe with a gauging rod and gauging rod closure, 1 vent pipe with a vent cap, 1 brand new limit switch with type approval (AIII), 1 ladder and 1 spare socket for withdrawal purposes, 1 optical leak detection device with type approval and leak detection fluid. The tank will be sandblasted, primed, and painted white externally / RAL 9016 color (sample photo). (Other RAL colors are also available on request!) L = approx. 10.70 m – D = 2.50 m – Weight approx. 9.5 tons – ex works, loaded free of charge – General: You will receive an invoice with VAT shown. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! Bwsdpfx Asi A Hz Asc Tet In addition, we purchase existing tank systems and can, with certified specialist company qualifications in accordance with the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Condition: refurbished (used), Tanks with a capacity of 50,000 liters, Height: 2.85 m Length: 8.5 m Perfect for a retention tank or fire protection tank. Drinking water tanks are also available. The tanks are in very good condition, leak-free, and have been sandblasted by us. Freshly painted with durable, anti-corrosive epoxy resin and polyurethane paint on the outside. They are leak-proof and prepared to meet fire department regulations. We offer tanks with and without beds. The price for a tank without steel beds is PLN 10200€, the price for a tank with beds is PLN 11200€. The raw tank (not sandblasted or painted) costs 5600€. The tanks come with a leak-tightness certificate, a declaration of compliance with fire protection standards, required for fire department inspection, and an Operation and Maintenance Manual (available upon request). The customer can decide on the nozzle arrangement. An over-tank sump covering the tank outlet is available for PLN 4,000 net per unit. Bwsdpsfngf Isfx Ac Tot A float valve costs PLN 820€- 1500€ depending on the size. Installation is included in the price. The estimated time for completing a single tank is approximately 21-28 business days. Payment: 10% of the total amount as a deposit, with the balance due upon delivery, but before unloading the tank. We offer our own transport of the tank to the customer.

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/Inside: Ø 125/60.3 mm -Height: 58 mm -Number: 12x pillows available Bjdpjd Sqyisfx Ac Tewt -Price: per piece -Weight: 1.3 kg/piece

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/125 mm Bsdpod Tfq Eofx Ac Tewt -Height: 58 mm -Number: 9x pillows available -Price: per piece -Weight: 2.9 kg/piece

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions Bjdpfod Tfq Usx Ac Tswt -Outer/inner diameter: 200/116 mm -Height: 58 mm -Number: 10x pillows available -Price: per piece -Weight: 3.4 kg/piece

Year of construction: 2020, condition: like new (used), functionality: fully functional, Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Bodpfx Aow Sfg Esc Tjwt Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Bwjdpfsxcp R Usx Ac Tjt Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. For use in industry, research, and quality assurance. Operating Condition Display: Manual mode / Warning (Drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor pre-cooling: 11,432 h Pump circulation: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial version Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1120 x 1875 mm Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-shipment Service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Visual condition see pictures. Note Bwsdpfxoy H Hmwj Ac Tet Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: like new (used), MESPACK H-320 SCD – Automatic Pouch Filling and Sealing Machine The MESPACK H-320 SCD is an automatic pouch filling and sealing machine designed for the industrial filling and packaging of products in pre-formed flexible pouches. MESPACK is a manufacturer specializing in flexible packaging machinery, and the H-320 SCD is designed to automate the various stages of the process, including pouch handling, opening, filling, and sealing, within an industrial line. The machine automatically manages the pouches from feeding and positioning to final filling and sealing, providing an integrated solution for continuous production packaging lines. MAIN FEATURES -Manufacturer: MESPACK -Model: H-320 SCD -Type: Automatic pouch filling and sealing machine -Format: Pre-formed flexible pouches -Automatic pouch feeding -Pouch opening and positioning -Product filling station Bwsdpfxsy Nzm De Ac Tet -Automatic sealing -Automatic packaging handling -Continuous industrial production -Robust construction for professional use -Integrable with different feeding and dispensing systems -Compatible with inspection, transportation, and end-of-line equipment APPLICATION The MESPACK H-320 SCD is designed to automate the various operations necessary for packaging products in pre-formed pouches. The machine individually receives each pouch, positions and opens it, and then performs the filling operation using the corresponding dispensing system. Once the product has been introduced, the machine automatically seals the pouch, preparing it to continue to the next stage of production. Depending on the product and the line configuration, it can be combined with: -Product feeding systems -Volumetric dispensers -Liquid dispensers -Weighing machines -Weight controllers -Metal detectors -Inspection equipment -Conveyors -Stacking and end-of-line systems APPLICATIONS A particularly interesting solution for food manufacturers and processing and packaging companies looking to automate the filling and sealing of products in pre-formed flexible pouches. The MESPACK H-320 SCD can be integrated into both existing packaging lines and new installations designed for the processing and automatic packaging of products in pouch format. Machine available for inspection. Additional technical information, dimensions, photographs, or videos can be provided upon request.

Condition: excellent (used), Espec Type: EGN28-6CWL Espec, water-cooled Temperature test chamber, N series Power supply: AC 400 V, 3-phase, 50/60 Hz, 38 A Bedpfxjzg Tyne Ac Tjwt Temperature range: -70 to +180 °C Temperature change rate: Heating: 10 °K/min Cooling: 5.5 °K/min Internal dimensions (W x H x D) in mm: 1000 x 1000 x 800 External dimensions (W x H x D) in mm: 1205 x 1920 x 2159 Usable volume: 800 liters Refrigerant: R-404A Refrigerant: R-508A Weight: approx. 695 kg For your safety as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Bwedpfx Ajzg Ty Uoc Tst Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: used, CTS Type: TS-70/600-13 Water-cooled temperature test chamber Type series: TS-70/600-13 Bodozg Tzfopfx Ac Tewt Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from 120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Electrical connection: 400/3P/N/PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.