Used Launch Diagnostics Device for sale (11,918)

Condition: good (used), Offer 25475 Manual double unwind/rewind reel Bodpfxjzkhbno Ac Tjwt Technical data: - Coil weight, left + right, up to approx. 1 t - Coil width, each side, up to approx. 300 mm - Coil inner diameter, approx. 380 to 500 mm - Coil outer diameter, up to approx. 1250 mm - Arbor height, approx. 750 mm - Space requirement, approx. W 1250 x D 900 x H 1300 mm - Weight, approx. 200 kg

Condition: used, Manufacturer: KHALMANN Type: AGM 10 Bwjdpezxqzyefx Ac Tjt Load capacity: 75 kg Outreach: 4200 mm with pneumatic gripper adapter

Condition: used, Format: Equipment: Speed: 4,300 cycles per hour Bedpfx Aex N Ng Esc Tewt Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Set Thickness: 2.5mm Reverse Reading: Yes Cascade Feeding from all Feeders: Yes High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)

Condition: used, Format: 0x0 Equipment: Linotype-Setzmaschine Bwsdox Rcw Topfx Ac Tot

Condition: used, Manufacturer: KHALMANN Type: AGM 10 Load capacity: 75 kg Bjdpozxqw Uofx Ac Tewt Outreach: 4200 mm with magnetic adapter

Year of construction: 2003, condition: excellent (used), Press-in device for ceramic pins in rotor shafts Principle of operation: The ceramic pins are fed by means of an oscillating conveyor pot via a pneumatic hose to an inspection station in which the position of any one-sided hole is checked. This is done with an optical sensor. Incorrectly positioned parts are conveyed by a pneumatic slide into a collecting container. Pins in the correct position are fed through another pneumatic tube to the separator of the press-fit tool. The actual press-fit process is also performed pneumatically with a punch guided by a roller bearing. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too lightly into the shaft. A pressure p2, which is also manually adjustable, then presses the pin into the rotor shaft as far as it will go. A disk spring package preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into the die, removed and clamped by an operator. This process is safeguarded by a light curtain. Design Bwsdpfeib H U Dsx Ac Tet Self-supporting station integrated in complete system for pressing in ceramic pins and balls. Rotor shafts Ø: 5 - 20 mm L: 50 - 200 mm Ceramic pin Ø: 3 mm L: 5 +/- 0,2 mm Working cycle Power: 15 strokes per minute Safety safety door with safety switch Category 4 light curtain Emergency off Airborne sound emission Continuous sound pressure at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse. 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year 2003 Electrically height adjustable work table Documentation and wiring diagrams are available

Condition: good (used), load capacity: 3,000 kg, Protec Reiss welding rotator, optionally with a perforated table, size as desired. 360° rotation. Adjustable axis. Bjdjziyh Djpfx Ac Tewt Can be used without a perforated table for customer-specific parts or with a perforated table. Table height, top surface: 1.16 m. We have several of these rotators in stock. Additional cost for a new perforated table: €2,600 (2.0 x 1.0 x 0.2 m).

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Bwsdpsi Dagksfx Ac Tst Maximum moment load of the work table: 1250 g/mm Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Total height: 1675 mm

Condition: used, Year of construction: 2010, centre height 170 mm Bwsdpjzwxyhefx Ac Tet Control CNC Achse rotary table dia. 180 mm total power requirement 2 kW weight of the machine ca. 92 kg dimensions of the machine ca. 0,6x0,35x0,4 m

Condition: used, DECKEL Spiral milling attachment – scope of supply and condition as shown in the pictures. Bwedpfx Aozwn Dvsc Tjt

Condition: ready for operation (used), Switch Testing Device - 3x test stations for appliance switch testing - Voltage: 0–600V AC / DC - Current rating: max. 40A - Operation of test switches via pneumatic cylinders - Testing with resistive and inductive loads according to EN 61058 (VDE 0630) - 1x thermal chamber (oven) for testing at ambient temperatures up to 125°C - Testing of appliance switches with rated data 250Vac / 16(4)A / 125°C Bodpfxjx I Ef Uj Ac Tewt Buyer responsible for disassembly!

Condition: excellent (used), Mettler Toledo Type: TGA/DSC 1 STAR® Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for thermal analysis of materials. The device combines thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) in a single system, making it ideal for applications in industry, research, materials testing, and quality assurance. Features & Applications - Thermogravimetric analysis (mass changes) - DSC analysis (heat flow, melting points, Tg) - Analysis of plastics, polymers, chemicals, pharmaceuticals, and materials - Temperature- and time-dependent measurements - High precision and stability - Network and PC-connectable (STAR® system) Technical Data (approx.): - Dimensions: approx. 500 × 500 × 600 mm - Manufacturer: METTLER TOLEDO - Model: TGA/DSC 1 STAR® - Sensor type: SDTA FRS2 - Power supply: 100–240 V / 50–60 Hz - Power consumption: approx. 300–600 W - Weight: approx. 35–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) Bjdezix Ddopfx Ac Tjwt Please feel free to contact us by phone for further questions.

Condition: used, functionality: fully functional, Automatic dosing device for coating the filter plates with dry additive or for applying a filter aid layer. Bedpfx Acowvh A Eo Towt

Condition: excellent (used), Here we offer you a weathering test device. Heraeus Atlas Xenotest BETA – a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOSENSIV drive Control of lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature up to 80°C, regulated Measurement sensor on sample level XENOSENSIV E(300-400 nm) Humidification / irrigation Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Bsdpfszdtkusx Ac Tjwt Black standard temperature: Surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V ± 10 % 50-60 Hz Power connection: 32A Power consumption: approx. 12 kVA Rated power of the xenon lamp: 2200 VA Power of the xenon lamp: 2800 VA Rated current: 16A Lamp current max.: 20A Dimensions: Width 900 mm x Depth 1200 mm x Height 1800 mm Maximum sample area: 4000 cm² Weight: approx. 400 kg Type: Heraeus Atlas Xenotest BETA LM Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Weiss Umwelttechnik GmbH Salt spray chamber / corrosion test chamber Used salt spray chamber Weiss SC/KWT 450 for corrosion, salt spray, and condensation water tests according to common industry standards. The system is suitable for material testing, coating testing, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Test chamber volume: 450 liters Bjdpfx Aezd Az Aoc Tjwt Max. load: 100 kg Brine reservoir: 180 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Salt spray test up to +50 °C Condensation water test up to +45 °C Humidifier up to +75 °C Power connection: 230 V / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment: Control unit Test chamber with sample holders Brine supply system Documentation / Service manual Accessories as shown in the pictures Scope of delivery Salt spray chamber Weiss SC/KWT 450 Documentation Accessories as shown in the pictures Condition Used, optical condition as shown in the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: repair required (used), Year of construction: 2014, functionality: not functional, overall weight: 1,500 kg, for excavate Bwodexggc Nopfx Ac Tet machine without flywheel drive motor and frequenzy regulator

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, overall weight: 426 kg, load capacity: 4,000 kg, DGUV certified until: 07/2027, Seith 40.55 rotating device with the following specifications: Load capacity: 4,000 kg Load center of gravity: 500 mm Mounting: FEM IIIA Overall width: 1,100 mm Year of manufacture: 2015 Own weight: 426 kg Own center of gravity: 95 mm Bodezhhcyepfx Ac Tswt Overhang: 210 mm Net price ex works, without fork arms (Price for fork arms upon request) Inspection and demonstration available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. Transportation costs upon request. Further information and offers can be found on our newly designed website.

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Bedpezinzlofx Ac Tswt Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: excellent (used), Here we offer a fastening system. Bsdpfjzgabfex Ac Tewt Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: excellent (used), Mitutoyo Model: QV-L404Z1L-D Item Description: For sale is a CNC vision measuring machine from the renowned manufacturer MITUTOYO. This is the Quick Vision Active 404 model. The device is ideal for precise optical measurements in production, quality assurance, and research. Technical Data: Brand / Type: Mitutoyo QV-L404Z1L-D (Quick Vision Active 404) Measuring range (X / Y / Z): 400 × 400 × 200 mm Camera: CMOS color camera Software: Mitutoyo QVPAK QVPAK (R) Version: 13.301.0075 Optics: Zoom lens, LED illumination system Worktable: High-precision glass stage Equipment: Control PC with QVPAK measuring software 2 × 22" TFT monitors Keyboard & mouse Control panel Swivel office chair for comfortable operation Scope of delivery: Mitutoyo Quick Vision Active 404 measuring device Bjdpfezii Duox Ac Tswt Control PC with QVPAK 2× TFT monitors (22") Keyboard, mouse Control panel Swivel office chair Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors reserved!) Further questions can gladly be answered by phone.

Condition: good (used), External measuring device STUDENROTH Bü-Fix. Bwjdpfx Aeztdb Nsc Tjt

Condition: used, Year of construction: 2006, Main areas of application: Animal feed industry: Production of high-quality sinking or floating fish feed and pet food. Food industry: Processing of cereals, protein concentrates and structured food ingredients. The Kahl LTW 160 twin screw extruder is a high-performance industrial machine from the German manufacturer Amandus Kahl, primarily used for mixing, kneading, cooking, and shaping viscous materials (such as animal feed, fish feed, or food components). The machine is characterized by its modular design and integration into complete, turnkey production lines. Format: Screw diameter (??): 160 mm Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, Bwjdpfx Acovfxqye Tjt 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s Bsdpfx Aozii Akec Towt - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Bsdpozil T Esfx Ac Tswt Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg -Control: with hand terminal, foot pedal and digital speed setting -Three-jaw chuck: Forkardt Ø 400 mm, three-jaw chuck bore Ø 140 mm -Speed: 0-1 1/3 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes Bodpfozkfulox Ac Towt -Base frame: without adjustable feet -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox type CUSII260/720-S -Translation: 1:6375, 1:1530 -Input shaft: Ø 30 mm -Output shaft: Ø 170 mm -Transport dimensions: 2390/1110/H1520 mm -Weight: 2700 kg