Used Lab Extruder for sale (2,130)

Condition: new, Year of construction: 2025, Sample system for filling liquids into bottles, closing them with a twist-off cap and then bottles labelling. Complete system consisting of: Bottle unscrambler; Filling machine with 4 filling heads for liquids with high or low viscosity; Lid closing machine for different sizes and shapes of lids including lid unscrambler; Labelling machine for bottles/cans/containers made of glass or plastic; Collecting table. The individual machines of the packaging line are connected to each other via conveyor belts, which gives the installation of the line high flexibility. -Specifications: Number of filling nozzles: 4; filling range: 100-1000ml; dosing method: by piston pump; accuracy: +/- 1%; bottle height: 15-400mm; bottle diameter: 25-200mm; speed: max. 1000 bottles/hour; label size: L25-300mm, W20-180mm, product contact parts are made from 304 stainless steel. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. The machine photo just shows the 4-head filling machine. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kwsdov Nlbaepfx Adtst

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L13998xW5404xH2350 mm; total weight: about 10600kg; power: 19kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the flow wrap packaging and lid closing unit on request. Kodev Nmawepfx Adtswt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 1997, operating hours: 31,850 h, condition: good (used), Conical twin screw extruder - Manufacturer: CINCINNATI - Type: Titan 45 - Conical screws Ø45mm - Year: 1997 Ksdpov D Nzmofx Adtowt - 31850 operating hours - Engine power: 15kW - Flow rate: 120kg/h - Replacement motor - Replacement vacuum pump - Replacement material feed screw

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 Kwsdpfxepaiaij Adtet POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Layers: 5 Web Width: 1,500 mm Film thickness range: 10–45 μm Output: - 15 μm: up to 745 kg/h - 17 μm: up to 845 kg/h - 23 μm: up to 905 kg/h Final film widths (per bobbin): - 3 x 500 mm - 6 x 250 mm - 3 x 400 mm - 2 x 750 mm Coextrusion Structure / Number of Layers: 5 layers Layer distribution: B / A / D / A / C Percentage: 10 / 35 / 10 / 35 / 10 % Raw materials: - LLDPE: 2.8–5.0 g/10min (190°C/2.16kg) - VLDPE: 2.8–5.0 g/10min (190°C/2.16kg) Extruder "A": 90/33 L/D, Maximum LLDPE output: 800 kg/h Extruder "B": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "C": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "D": 60/28 L/D, Maximum LLDPE output: 200 kg/h Flat die lip width: 2,050 mm Roll width: 2,100 mm Chill roll C1 diameter: 1,600 mm Maximum mechanical speed: 650 m/min MATERIAL FEEDING AND DOSING "A": - 1 main component material feed - 1 additional component material feed - 1 gravimetric batch dosing system (mounted directly on the extruder, 3 components) MATERIAL FEEDING AND DOSING "B, C, D": - 3 main component material feeds - 6 additional component material feeds - 3 gravimetric batch dosing systems (mounted directly on the extruder, 3 components each) Extruder "A": - SML Single-Screw Extruder SML-ES-90/33 - Tool unit: Manually operated screen changer SML-MF-man/90 Extruder "B, C, D": - 3 SML Single-Screw Extruders SML-ES-60/28 - 3 Tool units: Manually operated screen changers SML-MF-man/60 Cloeren 5-layer/3-up Stretch Film System consisting of: - 1 five-layer feedblock FG - 1 automatic flat die, 2,050 mm (for automatic die control) - 1 die splitting system for flat die body separation and cleaning - 1 vacuum box, 2,050 mm - 1 triple-chamber vacuum box SML-TC/2050mm Cooling and take-off unit: - 1 casting section SML-CS/2100/650 - 1 electrostatic edge pinning device - 1 thickness measuring unit (X-ray sensor for automatic dies, stretch wrap film) - 1 recovery system for feeding stretch wrap film with vertical scraptruder for SML 90 mm single-screw extruder - 1 antistatic pipe - 1 power supply unit for antistatic pipes Winding unit: - 1 Cast Film Turret Winder Series W4000 for stretch wrap films - Max. end film width: 3 x 500 mm - Number of turrets: 1 - Number of winding shafts: 4 - Winding shaft diameter: 3" - Max. mechanical winding diameter (3" bobbins): 400 mm - Min. winding diameter: 82 mm - Winding tension: 15–100 N/m - Contact pressure: 50–500 N - Cycle time (3" core magazine): 20–25 s - High-speed Cast Film Turret Winder for stretch wrap film—compatible with 3" air shafts, contact winding mode Kwedpjxyuffefx Adtjt - 1 automatic core and roll handling system W4000 4S1T (per turret) - 1 oscillating frame SML-OF/2100 Control and data logging: - 1 SML Automatic Control System SML-CS-2/SMILE/4 extruder - 1 SML Data Logging System: SMILE Process Analyzer - 1 E-container (20 ft) Chiller: Frigosystem Compressor unit: MSD V 30-37

Year of construction: 2001, operating hours: 64,499 h, condition: good (used), Conical screws, approx. 110 kg/h. A.C. motor 30.0 kW. New motor, 64,499 operating hours. Kwodpfx Asw Hy Uuodtjt

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Kwsdpsduyyzsfx Adtjt

Condition: used, Year of construction: 2004, System for attaching a butyl cord. approx. length = 3000 mm Kwjdpfx Asw A Ny Eodtjt approx. depth = 700 mm approx. height = 850 mm Weight: net/740 kg Condition of the goods: good/second-hand

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Ksdpfxev Uz Awe Adtowt

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Kedpfxevw Aqhj Adtewt

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Kodpfohx Elfex Adtewt Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Year of construction: 2011, condition: ready for operation (used), Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. Kwedpfx Adjhtvmhotjt

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Kwjdpfxohz Dyao Adtot

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 133846, LDPE extruder, head diameter 150 and 200 mm, screw diameter 55 mm, width up to 1200 mm, 30-180 micron, single winding Ksdpfx Ajxdknqsdtswt

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1/10/2025, control cabinet height: 1,000 mm, Extruder FI 25, 3 cylinder heating zones + 2 die head heating zones, versatile application with a nitrided plasticizing unit. - Nitrided plasticizing unit, 25 mm diameter - Barrier screw with mixing tip (for rigid PVC), - Screw output torque 236 Nm - maximum screw speed 152 rpm - Screw start interlock to prevent start-up under insufficient heating - Cylinder fitted with hopper zone cooling (liquid-cooled) - 3 cylinder temperature regulation zones - Extrusion output with die Ø8: 25 kg/h - Heating and cooling system (band heaters, cooling fan) - Lenze gearmotor with 4 kW motor - feeding - Stepless adjustment via potentiometer on frequency inverter Kwodpfjxtf Hgox Adtot - Temperature regulation via Omron controllers with full control - Heating element current measurement - heater burnout detection - Heating tuning function PiD - type "J" thermocouples - Die head with 2 heating zones without cooling

Year of construction: 2020, condition: new, Oxygen and temperature measurement in molten metals Kodpfx Ajgqr A Dedtewt

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Kedpfx Asurvzrjdtjwt Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Kodpfx Aot Tvx Tjdtowt Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.

Condition: new, Year of construction: 2025, functionality: fully functional, Der Getreideextruder EGK-60 wurde entwickelt, um die Qualität des Futters zu verbessern, hochwertiges Futter zu erhalten, um das Wachstum der Tiere deutlich zu verbessern und die Menge der produzierten Milch zu erhöhen.

Der Extruder verwandelt Getreide in eine schaumige Masse in Form von kleinen Stäbchen oder Flocken. Die Antinährstoffe in den Hülsenfrüchten werden deaktiviert. Unter dem Einfluss hoher Temperaturen findet eine Desinfektion des Futters statt, die schädliche Mikroflora, Pilze und krankheitserregende Bakterien abtötet, für die junge Tiere und Küken besonders empfindlich sind.

Außerdem werden unter Druck und Hitze die für den Verdauungstrakt schwer verdaulichen Stärkebestandteile in leichtere und einfache Kohlenhydrate und Zucker aufgespalten. Vitamine und alle anderen Nährstoffe bleiben erhalten, da die Wirkung der Temperatur nur von kurzer Dauer ist und im Bruchteil einer Sekunde eintritt. Dadurch verlieren die Tiere nicht ihre Kraft bei der Verdauung des Futters, sondern setzen ihre gesamte Energie und Kraft für die Steigerung ihres Körpergewichts und der Milchproduktion ein. Die Verdaulichkeit des Futters durch die tierischen Organismen liegt bei 90 %.

Das fertige Produkt eignet sich hervorragend für den Transport und die Lagerung, da es sich nicht auflöst oder bröckelt.

Länge: 750.0(mm) Breite: 800.0(mm) Höhe: 500.0(mm) Gewicht: 80.0(kg) Warenart: Futtermittelextruder / Extruder Anwendung: Zur Futtermittelextrusion Antriebsart: Elektrisch Leistung: bis zu 60.0(kg/h) Motorleistung:
7,5 kW Spannung:
400 V Drehzahl: 1500 (U/min) Tankinhalt:
3L Rohmaterial für die Verarbeitung:
Getreide (ölfreies Getreide | Feuchtigkeitsgehalt 15-25 %) Gewonnenes Erzeugnis: Stangen mit einem Durchmesser von 10 mm und einer Länge von 10 mm Kjdpfx Ajwk Ipnsdtjwt

Condition: new, functionality: fully functional, Die Arbeitseinheit des Getreideextruders vom Hersteller Technomaszbud – WE-30 – verarbeitet Getreide zu einer Masse, die in kleine Stäbchen oder Flocken geformt wird. Kjdpowi Sc Nefx Adtswt Durch dieses Verfahren werden unerwünschte Stoffe und Verbindungen, die in Hülsenfrüchten enthalten sind, deaktiviert.

Condition: excellent (used), Year of construction: 2016, Field X 4250mm Field Y 2210mm Field Z 1000mm Motor 9.6Hp Tool changer 10 positions Drilling head 10 + 4 + 2 2 Pumps x 250mc in total 500mc Kjdswq Ir Nopfx Adtowt

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Kwsdpfx Aeu Itqdodtjt

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Kwedpfxjibikwe Adtst Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Year of construction: 1992, condition: excellent (used), functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x250x50mm Perpendicularity 1µm 4-sided! Measurement report on request for an extra charge Kedpoq I R N Rofx Adtswt

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 1000x275x100mm Perpendicularity under 1µm! Incl. Kunz vacuum slide and Mahr measuring probe Kjdpfjix Ahxex Adtjwt Measuring protocol on request against surcharge