Used Krauss Maffei for sale (233)

Condition: excellent (used), Year of construction: 2003, KRAUSS MAFFEI Injection Moulding Machine KM 4000-24500 MC with optional ESS Energy Saving System Basic Data Manufacturer: KraussMaffei Model: KM 4000-24500 MC Year of manufacture: 2003 Control system: MC4 Software languages: German, English, Swedish Clamping Unit Clamping force: 40,000 kN Mould opening force: 2,525 kN Platen dimensions: 3,315 × 2,920 mm Tie bar clearance: 2,240 × 1,800 mm Mould opening stroke: 3,100 mm Minimum mould height: 1,100 mm Maximum mould height: 2,000 mm Kwodsyuf N Eepfx Aalsw Maximum daylight: 4,200 mm Ejector stroke: 350 mm Ejector force: 772 / 368 kN Injection Unit (HPS-AT) Screw diameter: 150 mm L/D ratio: 23 Max. injection pressure: 1,843 bar Shot volume: 13,254 cm³ Shot weight (PS): 12,061 g Injection rate: 1,431 cm³/s Plasticising rate: 266 g/s Electro-hydraulic System Hydraulic pump motor power: 200 kW Heater power: 159 kW Number of barrel heating zones: 7 Dry cycle time (EUROMAP 6): 270 cycles/h Hydraulic oil tank capacity: 2,700 l Machine Dimensions and Weight Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m Machine weight: 247 t Maximum mould weight: 90,000 kg Optional ESS Energy Saving System (Energy Saving Systems) The machine can be equipped with a state-of-the-art ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency converter, adjusting the motor speed to match the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is actually needed. Key Benefits of the ESS System - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in the plastics processing industry - Reduced energy consumption during idle operation - Lower hydraulic system heat generation - Extended service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines without modifications to the machine’s structure The ESS system offers a modern solution to considerably reduce the operating costs of the injection moulding machine while maintaining full production capacity.

Condition: excellent (used), Hydraulic motor for Krauss Maffei injection molding machines. MOS 6500-30-168 Kjdpfxjx Uqv Sj Aaloww

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN Kwodpfeyrrwkjx Aalow - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: used, CNC control, control cards, MC3 control, plug-in cards, printed circuit boards, electronics housing -Manufacturer: Krauss Maffei, control module from injection molding machine Ksdpfx Aaench Iioloww -Electronic module: HU 100 5089750 3AO63 -Electronic housing: phoenix contact type UEGM -Number: 14x module available -Dimensions: 90/25/H85 mm -Weight: 0.1 kg/pc.

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump Kwodpfxog Avqco Aalew -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Condition: excellent (used), Year of construction: 2003, KRAUSS MAFFEI KM 4000-24500 MC Injection Moulding Machine _____ Basic Information • Year of manufacture: 2003 • Control system: MC4 • Software languages: Swedish, German, English _____ Clamping Unit • Clamping force: 40,000 kN • Mold opening force: 2,525 kN • Platen dimensions (H × V): 3315 × 2920 mm • Tie bar clearance (H × V): 2240 × 1800 mm • Mold opening stroke: 3,100 mm Kwedpfx Aoyifg Dsalsw • Min./max. mold height: 1,100 – 2,000 mm • Maximum daylight: 4,200 mm • Ejector stroke: 350 mm • Ejector force (front/rear): 772 / 368 kN _____ Injection Unit (HPS-AT) • Screw diameter: 150 mm • L/D ratio: 23 • Maximum injection pressure: 1,843 bar • Injection volume: 13,254 cm³ • Shot weight (PS): 12,061 g • Injection rate: 1,431 cm³/s • Plasticizing capacity: 266 g/s _____ Electro-Hydraulic System • Hydraulic pump motor power: 200 kW • Installed heater power: 159 kW • Number of barrel heating zones: 7 • Dry cycle time (Euromap 6): 270 cycles/h • Hydraulic oil tank capacity: 2,700 l _____ Machine Dimensions and Weight • Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m • Machine weight: 247 t • Maximum mold weight: 90,000 kg

Condition: excellent (used), Year of construction: 2011, Year of construction: 2011, Kjdpjtxymmjfx Aaljww Arm range: 1717 mm, weight: 20 kg, Control unit: DX100

Year of construction: 2016, condition: as good as new (ex-display), Kategorie / Category: Doppelschneckenextruder / Twin-screw extruder Nummer / Number: DE27621 Hersteller / Manufacturer: KraussMaffei Berstorff Type: ZE 110 R x 28D UTmi Year of manufacture: 2016 like new, less than 100 operating hours Kwodpsiux Nmofx Aaljw Screw diameter / Screw diameter: 2x Ø 127,0 mm L/D: 28:1 (extension of the processing unit possible / extention of processing unit possible) Antrieb / Motor: 250,0 kW (AC) - Wasser gekühl / water cooled Details: co-rotor, screw speed: max. 300 rpm, degassing, 2x Busch vacuum pumps MM 1202 A VA3, segmented screws and barrels, 1 x Berstorff ZSFE 120 side feeder - Control system: Siemens S7 with screen control The offer does not meet your expectations? Please visit our website Plama or send us your detailed inquiry, we have the right product for almost every budget.

Condition: good (used), Year of construction: 2016, Synchronization of the saw carriage - 6 pieces available Kwsdjuzxrgepfx Aalow

Condition: good (used), Year of construction: 1997, Krauss-Maffei KM 110-520 C1 Year: 1997 Screw diameter: 45 mm Clamping force: 110 tons Tie bar distance: 47x47 cm Shot weight: 234 g Kjdjyh Rymopfx Aaljww

Condition: used, Year of construction: 1994, Krauss-Maffei KM 65-190 C1, Year of manufacture: 1994, Clamping force: 65 tons, Screw diameter: 35 Kwodpfx Ajyh Rygsaljw

Condition: like new (used), Year of construction: 2025, KraussMaffei Injection Moulding Machine KM 320-2000 PA CN Year of manufacture: 2025 Machine equipped with a five-point, double toggle lever clamping unit (three-platen system) with a servo-electric drive. Injection unit with servo-electric drive for injection, plasticizing, and aggregate movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing system Complete system for thermoplastics. Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 3,200 kN Mold opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar spacing (H × V): 820 × 770 mm Mold opening stroke: 650 mm Mold height (min.–max.): 300–700 mm Daylight: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Shot volume: 1,078 cm³ Shot weight: 981 g Kodpfsyft Nzex Aaleww Injection speed: 160 mm/s Injection rate: 616 cm³/s Screw speed: 191 rpm Plasticizing rate: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater capacity: 29.2 kW Number of heating zones (cylinder): 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight incl. control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in modern servo-electric configuration, ensuring high precision, energy efficiency, and process repeatability.

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 420-3000 CX Injection Moulding Machine Year of manufacture: 2011 Control system: MC5 Clamping Unit: Clamping force: 4,200 kN Tie bar spacing (H x V): 900 x 800 mm Platen dimensions (H x V): 1,400 x 1,250 mm Min. mould height: 780 mm Max. daylight between platens: 1,400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6,700 kg Injection Unit: Screw diameter: 80 mm Injection pressure: 1,856 bar Shot volume: 1,608 cm³ Shot weight (PS): 1,464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional Equipment: 2 x hydraulic nozzle controls (GK) 2 x hydraulic core pulls – moving platen 1 x hydraulic core pull – fixed platen Masterbatch dosing unit control 14 GK zones Kwjdsydbbvspfx Aalow Electrical and General Data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1,075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Condition: ready for operation (used), Year of construction: 1995, Krauss-Maffei KM 125-620 C1 Clamping force 125 tons Year 1995 Screw diameter 50 mm Injection volume 377 cm³ 343 g Tie-bar distance 47x47 cm Kedpewyx Ruofx Aaleww

Condition: good (used), BOSCH B 830 303 227 Kwjdpfx Ajquuptealow

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm Kwsdpfx Aeyv D Hgoaljw screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Year of construction: 2000, condition: ready for operation (used), This Krauss Maffei 110-520 C1 was manufactured in 2000. It features a MC4 controller, Euromap Interface 12, and a hydraulic unit. With a screw diameter of 45 mm, it offers a maximum pressure of 1878 bar and an injection volume of 275 cm³. Consider the opportunity to buy this Krauss Maffei 110-520 C1 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Euromap Interface: 12 / Hydraulic Units: 1 Machine Benefits Technical Machine Benefits • Max. Pressure: 1878 bar / max. Injection volume: 275 cm³ Kwedpfx Aaoyaryuelow • Hot nozzle zones: 1 / screw diameter: 45 mm

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment Kwjdpfxjyaizve Aaljw • Hydraulic ejector • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Year of construction: 2001, condition: ready for operation (used), This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information. Machine Benefits Technical Machine Benefits • Screw diameter: 50 mm/ max. Pressure: 1521 bar / max. Injection volume: 340 cm³ Kwedpfsyary Uox Aalsw • Euromap interface: 12 / hydraulic units: 1 / air units: 1 / hot nozzle zones: 1

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm Kwodpfx Aoylkxasaljw • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phases • Operating voltage: 400 V • Frequency: 50 Hz Additional equipment • Cooler (included)

Condition: ready for operation (used), Year of construction: 2013, clamping force: 1,100 kN, total height: 470 mm, product length (max.): 470 mm, This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. • Mold opening force: 70.0 kN • Clamping plate (L x W): 745 x 770 mm • Internal dimensions (L x W): 470 x 470 mm • Mold opening stroke max: 600 mm • Mold installation height min: 300 mm • Opening width: 900 mm Additional equipment • Robot (included) • Water temperature control equipment (not included) Kwsdpsx D Ea Usfx Aalew • Conveyor belt (not included)

Year of construction: 2013, operating hours: 42,681 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details. Kwodpfjym Uv Ssx Aalew • Plasticising Size: 180 • Plasticising Arrangement: H • Screw Diameter: 28 mm • Nozzle Radius: 10 mm • Nozzle Bore: 4 mm • 3 units available

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g Kodpfx Asyhbq Eoaloww • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Year of construction: 2002, condition: ready for operation (used), screw diameter: 40 mm, This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine. • Pump operating hours: 50,327 Kodpjx D Hxlsfx Aaloww • Automatic operating hours: 36,908 • Screw diameter: 40 mm • Condition notes: Machine operational; SGM functional; SR circuit board has an intermittent/loose connection Additional equipment • Robot: Sepro SR Success22 S3 Trans • Operating hours (powered on): 49,267 • Operating hours (automatic): 3,854 • Condition: Fully functional, good used condition • Storage conveyor belt (2014) • Optional: Reinhardt-Technik dosing system LSR 200 LLA (2013)

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm Kedpfxeydnp Hj Aaljww • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s