Used Krauss Maffei Km 350 for sale (203)

Condition: new, Year of construction: 2025, Injection Molding Machine – Krauss Maffei KM 500-4300 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial computer using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing Unit Hnsdpjxdd S Nsfx Ag Ueg Complete plasticizing unit for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle. Nozzle radius: 15 mm Nozzle opening: 6 mm Technical data (standard version) Clamping Unit Clamping force: 5,000 kN Opening force: 350 kN Platen dimensions (H x V): 1430 x 1350 mm Tie bar spacing (H x V): 1040 x 910 mm Opening stroke: 1350 mm Mold height (min.–max.): 400–950 mm Daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 49 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20.0 Injection pressure: 1,839 bar Shot volume: 2,290 cm³ Shot weight (PS): 2,084 g Injection speed: 100 mm/s Injection flow rate: 636 cm³/s Screw speed (standard): 195 rpm Plasticizing capacity (at standard screw speed): 134 g/s Nozzle contact force: 129 kN Electro-hydraulic system Pump motor power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Dry cycle time (according to Euromap 6): 2.8 s / 728 mm Dry cycle time (according to KM standard): 2.5 s / 520 mm Hydraulic oil quantity: 1,180 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Parts placement on the operator-opposite side Axes: X-axis (from mold): 900 mm, servomotor Y-axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z-axis (crosswise): 2,500 mm, servomotor Dimensions and weight Net weight (with control cabinet): 25.0 t Machine dimensions (L x W x H): 8.08 x 2.80 x 2.39 m

Condition: good (used), Year of construction: 2006, operating hours: 65,000 h, clamping force: 2,000 kN, screw diameter: 55 mm, Hydraulic core pull 2x Hot Runner 4x Hnsdpstqifnjfx Ag Ueg Air valves

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer utilizing real-time Ethernet technology, equipped with a built-in 21.5" operator panel with a full-colour touchscreen. Plasticising unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Hnodpfexdd Spjx Ag Uog Ejector stroke: 200 mm Ejector force front/back: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heating capacity: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Hydraulic oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part removal to the operator’s opposite side Axes: X-axis (from mould): 900 mm, servomotor Y-axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z-axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with colour touchscreen display. Plasticising Unit Complete plasticising unit for thermoplastics, screw diameter 50 mm, with check valve and open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical data (standard version) Clamping Unit Clamping force: 1,600 kN Hedpfxoxdd N Us Ag Ujng Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie bar spacing (H x V): 520 x 520 mm Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force front/rear: 23 / 10 kN Injection Unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection rate (standard): 177 cm³/s Screw speed (standard): 265 rpm Electro-hydraulic System Pump motor power: 22 kW Installed heater power: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 l Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + drives + parts) Part removal on operator-offside Axes: X-axis (from mould): 620 mm, servomotor Y-axis (vertical, with brake): 1,200 mm, servomotor Z-axis (crosswise): 1,500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 6.10 t Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine Hnedoxcputjpfx Ag Ujg Year of manufacture: 2008 Additional equipment: Wittmann robot General description: The machine is equipped with a fully hydraulic clamping system. Control: MC5 with color monitor, integrated operator panel, and three built-in USB ports. Plasticising unit: Complete unit for thermoplastics in a wear-resistant version, screw diameter 120 mm, non-return valve, open nozzle. Technical data Clamping unit Mould clamping force: 11,000 kN Mould opening force: 770 kN Dimensions of clamping plates (h × v): 2210 × 1910 mm Tie bar clearance (h × v): 1550 × 1250 mm Mould opening stroke: 2000 mm Mould height (min–max): 600 – 1200 mm Platen stroke: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Max. shot weight (PS): 6175 g Screw speed (standard/option): 103 / 145 rpm Injection rate (standard): 1118 cm³/s Injection rate (with accumulator): 1696 cm³/s Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 82 kW Number of heating zones (barrel): 7 Number of dry cycles according to Euromap: 802 / h Oil tank capacity: 2440 l Dimensions and weight Net weight (incl. control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN Hjdpfxoxak Uce Ag Ujng 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Hsdow U Rcdepfx Ag Uong Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: good (used), Year of construction: 1999, Krauss Maffei KM 420 - 2700 C1 injection molding machine • Year of manufacture: 1999 Technical data Closing unit • Clamping force: 4200 kN • Max. mold opening force: 250 kN • Moving platen feed force (opening): 124 kN • Moving platen feed force (closing): 102 kN • Dimensions of mold mounting plates (W x H): 1270 mm x 1200 mm Hnodpfxjwqd Aqj Ag Ueg • Distance between columns (W x H): 800 mm x 800 mm • Mold opening stroke: 1020 mm • Min. mold height: 380 mm • Max. daylight: 1400 mm • Ejector force (forward / backward): 95 / 48 kN Unit injection • Screw diameter: 80 mm • L/D ratio: 20 • Injection pressure: 1829 bar • Stroke volume: 1433 cm³ • Injection weight (PS): 1304 g • Injection capacity: 513 cm³/s • Max. plasticization capacity: 108 g/s • Nozzle pressure: 173 kN Electrical and hydraulic installation • Pump motor power: 75 kW • Installed heating power: 36 kW • Number of cylinder heating zones: 7 • Oil tank capacity: 1075 l Dimensions and weight • Machine dimensions (L x W x H): approx. 7.06 m x 2.33 m x 2.51 m • Total machine weight: 20,500 kg

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine Year of production - 2011 LRX 500 robot Z axis 4000 mm X axis 1500 mm Y axis 1250/1250 mm Hydraulic-mechanical two-plate closing system with 4 pressure cushions and 4 locking units on the moving plate. PV - injection unit regulation. MC 5 control system with color monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with screw diameter 135 mm, with check valve and open nozzle Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - dimensions of the mounting plate (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - pressure injection: bar 1389 - injection volume: cm3 8588 - injection weight for PS: g 6098 - injection efficiency: cm3/s 1414 Electro-hydraulic equipment - rated power of the pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 Hodpfx Aewqdyijg Ujng - dimensions of the place for installation (length x width x height): m 11.72 x 2.92 x 2.71

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. The machine is equipped with a PV-type proportional valve injection unit adjustment system. Control is handled by the modern MC6 control system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a color display, LED backlighting, and visualization of all processes using ProcessDesigner. Plasticising unit: Complete unit for thermoplastics processing Wear-protected (abrasion-resistant) version Screw diameter: 105 mm Check valve and open nozzle Technical data: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen size (W x H): 1,660 x 1,530 mm Tie bar spacing: 1,180 x 1,000 mm Max. mould opening stroke: 1,600 mm Mould height (min – max): 500 – 1,100 mm Maximum opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1,778 bar Injection volume: 4,546 cm³ Shot weight (PS): 3,228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle contact force: 166 kN Electrical and hydraulic equipment: Pump motor rating: 120 kW Heater rating: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Hjdswyxbgepfx Ag Uong Oil tank capacity: 1,450 l Dimensions and weight: Net weight (with control cabinet): 40 t Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 800 – 12000 MX injection molding machine Year of production - 2006 Closing system: - Mold closing force: kN 8000 - Mold opening force: kN 560 - Dimensions of the mounting plate (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection system: - Screw diameter: mm 135 - Injection pressure: bar 1389 - Injection volume: cm3 8588 - Injection weight for PS: g 6098 Hsdpfx Agstmq Ake Uong - Number of screw revolutions, standard/option: rpm 121/153 - Injection efficiency (standard) Electric-hydraulic equipment - Nominal power of the pump motor: kW 110 - Installed power of heaters: kW 57 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (length x width x height): m 10.81 x 2.92 x 2.51

Condition: excellent (used), Year of construction: 2002, Krauss Maffei KM 80 -160 C2 injection molding machine Year: 2002 Control version: MC 4 Closing system: Clamping force: 800 kN Mould opening force, max.: 55 kN Moving platen feed force Opening: 31 kN Moving platen feed force Closing: 20 kN Mould platen size (h x v): 610 mm x 610 mm Distance between connecting rods (h x v): 405 mm x 405 mm Mould opening stroke: 500 mm Min. mould height: 250 mm Max. daylight: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 20/11 kN Injection system: Screw diameter: 30 mm Ls/D ratio: 26 Injection pressure: 2025 bar Sweep volume: 85 cm3 Injection weight, PS: 77 g Electrical and hydraulic equipment Nominal pump motor capacity: 11 kW Installed heating power: 9 kW Adjustable barrel heating zones: 5 Number of drying cycles: 1800 1/h Hnsdpfjv Dhnlox Ag Ujg Tank capacity: 270 ltr. Dimensions and weight Machine dimensions: 3.81 m x 1.40 m x 2.00 m Total machine weight: 3200 kg Max. mold weight: 860 kg

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Control type: MC 4 Number of operating hours 93 900 Closing unit Clamping force: 23000 kN Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Hodowq Ed Aspfx Ag Ueng Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Maximum mould height: 1800 mm Maximum daylight: 3700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Sweep volume: 8588 ccm Shot weight, PS: 7815 g Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 robot X-axis - 2,000 mm Y-axis - 3,000 mm Z-axis - 5,000 mm

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Maximum mould opening force: 160 kN Moving platen force – opening: 86 kN Moving platen force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie-bar clearance (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Maximum plasticizing rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Hydraulic oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: - Oil tank Hnedjw A N Hfepfx Ag Uog - Anti-vibration pads - 3 × core pullers - 8 × hot runner control zones - 2 × air valves - Robot interface according to Euromap 67 Additional information: - Machine located in Poland - Immediately available - Loading, transport, installation, and commissioning can be organized

Condition: excellent (used), Year of construction: 2007, KRAUSS MAFFEI INJECTION MOULDING MACHINE KM 300-1900 C1 Year of manufacture: 2007 Includes: Wittmann W 731 Robot General Description We offer a used injection moulding machine from the renowned manufacturer Krauss Maffei, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system and a modern MC4 control system with color monitor, integrated operator panel, and floppy disk drive. Plasticising Unit Complete plasticising unit for thermoplastics, anti-wear version, equipped with a 60 mm diameter screw, non-return valve, and open nozzle. Technical Data Hnjdpfxew Du Hts Ag Ueg Clamping Unit Clamping force: 3,000 kN Mold opening force: 160 kN Moving platen force: – Opening: 86 kN – Closing: 68 kN Platen dimensions (H x W): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mold opening stroke: 820 mm Minimum mould height: 330 mm Platen open stroke: 1,150 mm Ejector stroke: 200 mm Ejector force: 58 / 28 kN Injection Unit Screw diameter: 60 mm Injection pressure: 2,420 bar Shot volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Injection rate: 294 cm³/s Throughput at: – standard speed: 55 g/s – increased speed: 78 g/s Electro-hydraulic System Pump motor power: 55 kW Heater power: 30 kW Number of barrel heating zones: 6 Dry cycle rate (Euromap): 1,350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Net weight with control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Hjdpfxotrya Ro Ag Ueng Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot LRX 500 Year of production - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions Hjdewkhmmopfx Ag Uong - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: excellent (used), Year of construction: 2006, Krauss MAffei KM 300-1000 C2 injection molding machine Year of manufacture : 2006 Closing system : Closing force : 3000 kN Mold opening force, max : 160 kN Moving force of moving plate Opening : 86 kN Moving force of moving plate Closing : 68 kN Size of mold plates (h x v): 995 mm x 1050 mm Distance between columns (h x v): 630 mm x 630 mm Mold opening stroke: 820 mm Mold height min: 330 mm Max daylight: 1150 mm Injection system : Auger diameter: 55 mm Ls/D ratio: 20 Injection pressure: 1904 bar Injection volume : 523 ccm Hodjrbhhhepfx Ag Ueng Injection weight, PS: 476 g Injection speed: 428 ccm/s General Data : Dimensions m : 5.97 x 2.04 x 2.36 Weight t : 12.5

Condition: excellent (used), Year of construction: 2016, Krauss Maffei Injection Moulding Machine KM 1600 – 17200 MX Year of manufacture: 2016 General description: A modern injection moulding machine featuring a fully hydraulic clamping system. Equipped with an advanced MC6 control system, based on an industrial computer operating on real-time Ethernet technology. Control is managed via an integrated 19-inch control panel with a colour touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit: Complete system for thermoplastic processing Screw diameter: 135 mm Version with anti-wear (abrasion-resistant) protection Non-return valve Open nozzle Technical specifications: Clamping unit: Clamping force: 16,000 kN Mould opening force: 1,120 kN Platen dimensions (W x H): 2,550 x 2,100 mm Tie-bar spacing (W x H): 1,870 x 1,420 mm Opening stroke: 2,700 mm Mould height (min.–max.): 700 – 1,600 mm Max. daylight: 3,400 mm Ejector stroke: 350 mm Ejector force (forward/backward): 300 / 150 kN Injection unit: Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,784 bar Injection volume: 9,662 cm³ Shot weight for PE: 6,860 g Screw speed (nominal / max.): 81 / 100 rpm Electro-hydraulic equipment: Hsdpfx Agowyw Npo Uong Main drive power: 160 kW Installed heater capacity: 93 kW Number of barrel heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 / h Oil tank capacity: 2,400 l Dimensions and weight: Net weight with control cabinet: 92 t Machine dimensions (L x W x H): 14.17 x 4.04 x 2.93 m

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements height 470 mm Hnodpsx D Ea Usfx Ag Uog Dimensions Machine Length 470 mm Clamping Unit Clamping force 1100 kN This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Power supply, power converter, power supply unit, switching power supply, MC3 controller Hnjdpsg Td Dujfx Ag Usg -Manufacturer: Krauss Maffei, power supply unit from injection molding machine -Type: NT 100 -Dimensions: 260/140/H130 mm -Weight: 5 kg

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Machine Length 405 mm Hnodpfx Aex D Ea Ijg Ueg Clamping Unit Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape, heating sleeve Hnjdpfx Agelvyi Eo Ujg -Type: Ø 96 x 60 mm -Item No.: 401 2627 -Heating power: 670 W -Voltage: 230 V -Quantity: 2x heating tape available Price: per piece -Dimensions: 160/100/H60 mm -Weight: 0.3 kg

Year of construction: 2016, operating hours: 23,497 h, condition: ready for operation (used), overall weight: 3,900 kg, total height: 2,500 mm, product length (max.): 4,700 mm, This Krauss Maffei 80–180 CX was manufactured in 2016. It features a clamping force of 800 kN and a tie bar distance of 750 mm. Equipped with a Yaskawa robot, conveyor belt, UV dryer, laser for sprue separation, and a cleaning station. Dimensions are 4700x1600x2500 mm, and it weighs approximately 3900 kg. Power supply is 400 V/50 Hz with a connected load of 15 kW. Consider the opportunity to buy this Krauss Maffei 80–180 CX hydraulic injection moulding machine. Contact us for more information. • Power Supply: 400 V / 50 Hz Hnedpfxox Uq Nfo Ag Ueg • Connected Load: 15 kW • Current: 248 A • Screw Diameter: 30 mm • Clamping Force 800 kN • Conveyor belt • UV dryer • Laser for sprue separation • Cleaning station Dimensions Machine Depth 1600 mm

Condition: good (used), CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Krauss Maffei, MC3 control plug-in cards, circuit boards made from injection molding machine -Temperature controller card: Gossen Pantatherm DS 4 (3 pieces) -DC-DC Converter: Elba euro module PCD 54 CP on breadboard: Krauss Maffei AN 100 -Prop. Amplification: Bosch 0 / 0 002 / 0 -Plug-in card: Krauss Maffei SK201 -Individual components: see photos -Price/Sale: complete -Dimensions: 480/215/H270 mm Hjdpfx Ajg S Dkmjg Uong -Weight: 4.8 kg