Used Krauss Maffei Km 350 for sale (221)

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Kjdju Rda Iepfx Anwolu Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Year of construction: 1998, condition: good (used), Part of an old direct extrusion line for pipes (which is also still available). This machine is supplied with the following components: - 4-component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control system for dosing and extruder Kjdex S Rimspfx Anwjlu - Single-circuit oil tempering - Maag melt pump

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving force of the moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Clearance (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool mounting height: 380 mm Opening distance: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed standard / optional: 1/min 285/349 Screw speed standard or stage 1: 95 PS Screw speed optional or stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for the injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inches) for data backup Kledpfjxu Uvasx Anweu Plasticization: 1 complete thermoplastic plasticization unit in wear-resistant design, screw diameter 70 mm with backflow prevention and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 3626

Condition: like new (used), Year of construction: 2007, operating hours: 27,000 h, clamping force: 6,500 kN, KraussMaffei KM650-3500 C2 injection molding machine for sale. The machine is in very good condition. It has only been operated in single-shift production and used exclusively for small batch and sample production. A new hydraulic pump was recently installed (approx. 300 operating hours ago). - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and guideways are undamaged and in like-new condition - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic cylinder Kljdpfsyn Sc Esx Anwju - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Inspection under power is possible. Other accessories such as Motan dryer, chiller unit, and much more available upon request. The machine can be dismantled and loaded by us upon agreement. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 62,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 70 mm, displacement volume: 1,077 cm³, Clamping unit: Ksdjzfpthopfx Anwolu Clamping force 2500 kN Mould opening force, max. 169 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1877 bar Stroke volume 1077 ccm Shot weight (PS) 980 gr. Injection rate 385 ccm/s Screw speed 220 1/min Plasticising rate max. 76 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 29 kW Adjustable barrel heating zones 6 Oil Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,50 x 2,20 x 2,40 m Total machine weight 14500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei robot LR100 X: 550 mm, Servo Y: 1200 mm, Servo Z: 2000 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x hydr. core pull - 1 x Air valve - Accumulator - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2004, functionality: fully functional, Clamping force: 1250 kN Screw diameter: 35 mm Tie bar spacing: 470 mm Shot weight: 142 g Minimum mould height: 300 mm Total weight: approx. 6,000 kg Kljdewthfuepfx Anwsu

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67 Kjdpeymn Nfsfx Anwelu

Condition: excellent (used), Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, Clamping unit: Clamping force 800 kN Mould opening force, max. 55,3 kN Travel force movable platen opening 31,1 kN Travel force movable platen closing 22 kN Size of mould platens (h x v) 720 x 670 mm Distance between tie bars (h x v) 470 x 420 mm Mould opening stroke 500 mm Mould height min 250 mm Max. daylight 750 mm Kjdpfozd Amxsx Anwolu Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 40 mm Ls/D ratio 20 Injection pressure 1860 bar Stroke volume 201 ccm Shot weight (PS) 182,9 gr. Injection rate 126 ccm/s Screw speed 295 1/min Plasticising rate max. 26 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Installed heating capacity 11 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 400 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 2,00 x 2,20 m Total machine weight 3900 kg Max. mould weight 995 kg Accessories: - Anti vibration pads - Anti vibration pads - 8-fold water distributer - BluePower - Krauss Maffei Robot SPX10 Additional Options: - 1 x Air valve - 1 x hydr. core pull - Robot interface according to Euromap 67 - 8 x hot runner controller

Condition: used, Year of construction: 1998, operating hours: 99,161 h, clamping force: 32,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 230,000 kg, # Sales Description A high-performance injection molding machine from the German manufacturer KraussMaffei is available for sale. This is the KM 3200-19000 MC model, specifically designed for the production of large-sized plastic components and industrial series manufacturing. The machine offers very high clamping force and is particularly suitable for applications involving technical plastic parts or large-scale items. The machine features a clamping force of 32,000 kN, a screw diameter of 130 mm, and a maximum shot weight of 8,100 g. This allows for the efficient production of large parts with high material requirements. In addition, the system is equipped with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also included in the package. Technical Data * Manufacturer: KraussMaffei * Model: KM 3200-19000 MC * Machine No.: IMM MC3F No.12 * Year of manufacture: 1998 * Operating hours: approx. 99,161 h Performance * Clamping force: 32,000 kN Kledpfsyt H Dhjx Anweu * Screw diameter: 130 mm * Max. shot weight: 8,100 g Dimensions and Weight * Machine weight: approx. 230,000 kg * Machine depth: approx. 4,900 mm * Machine height: approx. 4,200 mm The machine represents a robust and proven solution for industrial plastics processing and is especially suitable for manufacturers requiring large-format injection molding capacity. Further information, photos, or inspection appointments are available upon request.

Condition: used, Year of construction: 1998, operating hours: 98,806 h, clamping force: 40,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 255,000 kg, 2x KraussMaffei KM 4000-19000 MC – Injection Moulding Machines – Year 1998 For sale are two identical injection moulding machines manufactured by KraussMaffei, model KM 4000-19000 MC equipped with MC3F control system. These machines are particularly suitable for producing large plastic components that require very high clamping force. The systems are fully equipped and include several peripheral devices for material feeding and process control. ## Technical Data * Manufacturer: KraussMaffei * Model: KM 4000-19000 MC * Control: MC3F * Year of manufacture: 1998 * Operating hours: approx. 98,806 h * Clamping force: 40,000 kN * Maximum shot weight: 8,100 g * Screw diameter: 130 mm ## Dimensions & Weight Kljdpfxjyt Hy Ns Anwju * Machine depth: 4,900 mm * Machine height: 4,200 mm * Machine weight: approx. 255,000 kg ## Equipment * Robot interface: KUKA KRC4 * Sequential injection controller: S.I.S.E. IS-Tech * Temperature control units: GWK * Dosing and mixing system: Motan Colormetric * Belt conveyor ## Available Machines * Machine No. 14 * Machine No. 15 The machines can be purchased individually or as a package. Inspection by appointment is possible.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Kodsv Stbmspfx Anwslu Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Kodpfx Anezc Nw Aswelu Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX Kedpozc Nwpsfx Anwolu Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 228 g Injection pressure: 2500 bar Dosage volume: 251 cc Clamping Unit: Clamping force: 130 t Tie bar distance: 470x470 mm Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Pneumatic core pull x 6 Control system with 18 hot runner zones Injection unit hardened – bimetal Proportional valve on injection unit – accurate injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Robot interface Control unit with air valve Ksdpfxozc Ngde Anwolu Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Screw speed 265 1/min Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Ksdpfx Anjy Nlb Sewjlu Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Total machine weight 8200 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Servomotor Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - Interface for robot according to Euromap 67 - 8 x hotrunner controller

Condition: ready for operation (used), Year of construction: 1999, operating hours: 57,830 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, Clamping force 3000 kN Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Klsdpjy Nk Tasfx Anwou Ejector force 58 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1778 bar Stroke volume 1047 ccm Shot weight (PS) 953 gr. Injection rate 400 ccm/s Screw speed 218 1/min Plasticising rate max. 75 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 35 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads Additional Options: - 1 x Air valve - 3 x Core pulls - Robot interface according to Euromap 12

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100 – 12000 MX injection molding machine Robot - Wittmann Year of production - 2008 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, screw diameter 120 mm, with non-return lock and open nozzle TECHNICAL DATA Closing unit - Mold closing force: kN 11000 - Mold opening force: kN 770 - Dimensions of the mounting plate (h x v): mm 2210 x 1910 - Clearance between columns (h x v): mm 1550 x 1250 - Mold opening path: mm 2000 - Mold installation height (min - max): mm 600 - 1200 - Plate opening stroke: mm 2600 - Ejector stroke: mm 300 - Ejector force: kN 220/110 Kjdpfx Ansvu Hp Aowelu Injection unit - Screw diameter: mm 120 - Pressure injection: bar 1758 - Injection volume: cm3 6786 - Injection weight for PS: g 6175 - Number of screw revolutions, standard/option: rpm 103/145 - Injection efficiency (standard) ccm/s 1118 - Injection efficiency (accumulator) ccm/s 1696 Electric-hydraulic equipment - Nominal power of the pump motor: kW 132 - Installed power of heaters: kW 82 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 802 - Oil tank capacity: l 2440 Dimensions and weight - Net weight with control cabinet: t 73 - Machine dimensions (length x width x height): m 12.47 x 3.65 x 2.82

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Screw diameter: 135 mm Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 9662 cm3 Kjdpfxeyh I Emo Anwelu Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2011, operating hours: 54,980 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 90 mm, clearance between the columns: 1,350 mm, displacement volume: 2,290 cm³, injection pressure: 1,839 bar, mold height (min.): 978 mm, opening stroke: 1,020 mm, plate width: 1,710 mm, plate height: 1,650 mm, overall weight: 35,000 kg, number of injections: 1, Equipment: documentation/manual, KRAUSS MAFFEI KM 420-4300 CX with OVERSIZED CLAMPING UNIT Year: 2011 Pump Hours: 54.968 Control: MC 5 Injection unit, it is STANDARD for this type of machine: Screw: 90 mm Shott volume: 2290 cm3 Injection pressure: 1.839 bar The Clamping unit is oversized: Plates: H x V: 1.710 mm x 1.650 mm Tie bars distance H x V: 1.350 mm x 1.250 mm Min mould: 978 mm Daylight: 1.998 mm Because of that the weight of the machine is 35.000 kg instead of 24,2 t. The machine is built with Clamping force: 350 t, because of such needs from the buyer. The machine has possibility to start injection 2-3 mm before machine lock the mould. Last service: 26.05.2025. Last inspection: January this year. Condition of the Screw: Cmk is 3,62 Changed Accu bottles. It is possible to get some video on it in running and can be sent by WhatsApp. The machine is available some time W 35-38 (August- Sept). Until that it will be in running, but with very short series. Kljdpfjzcam Ujx Anwju We are speaking only about the machine, no other equipment is included. Maybe, it will be one SEPRO robot (big one) from one other machine, not this on the photos. Model: 5X – 35 Year: 2017

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Kedpfx Asy D Adtjnwolu Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, clearance between the columns: 1,120 mm, injection pressure: 1,795 bar, ejector stroke: 250 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Injection force: 8,000 kN Distance between columns (h x v): 1,120 mm x 1,000 mm Maximum mold opening distance: 1,400 mm Minimum/maximum tool installation height: 600 mm / 1,100 mm Opening stroke of the clamping plate: 2,000 mm Ejector stroke: 250 mm Ejector force: 226 kN (rearward: 59 kN) Injection unit Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Injection volume: 3,367 cm³ Injection size for PS: 3,064 g Injection capacity: 690 cm³/s Kledpfx Aney Ulhcjweu Nozzle clamping force: 166 kN MACHINE DETAILS Control model: MC4 Connected power of pumps: 90 kW Heating power: 61 kW Dimensions & Weight Machine dimensions (L x W x H): 10.4 m x 2.86 m x 2.39 m Net weight: 45 t Transport dimensions Closing unit - Dimensions (LxWxH) 6000x2740x2390mm / Weight 30t Injection unit Dimensions (LxWxH) 6200x2620x2300mm / Weight 16t

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Ksdpfexqhuusx Anwelu Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: Kodpfxoyf Uy Us Anwolu From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Kledpfx Aneh Dp R Eowju Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX injection molding machine Year of manufacture: 2010 We offer a high-class hydraulic injection molding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system with a color monitor, an integrated operator panel, and three USB ports. Thanks to its robust construction and high performance, it is perfectly suited for the production of thermoplastic parts. Equipment Fully hydraulic clamping system MC5 control system with color monitor Integrated control panel 3 USB ports Complete plasticizing unit for thermoplastics Ø 70 mm screw made of wear-resistant material Backflow valve Open nozzle Technical data Clamping unit Parameter Value Clamping force 3000 kN Mold opening force 169.3 kN Plate movement force – opening 86.3 kN Plate movement force – closing 67.8 kN Dimensions of mounting plates (h × v) 995 × 1050 mm Clearance between columns (h × v) 630 × 630 mm Mold opening stroke 820 mm Minimum mold height 330 mm Maximum opening stroke of plates 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection unit Parameter Value Screw diameter 70 mm Maximum injection pressure 1877 bar Injection volume 1078 cm³ Injection weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220 / 310 rpm Electro-hydraulic system Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Number of dry cycles (Euromap 6) 1350 / h Oil tank capacity 720 l Dimensions and weight Parameter Value Kedpfx Aeza Uuzsnwjlu Net weight 14.5 t Dimensions (l × w × h) 6.5 × 2.2 × 2.3 m