Used Knife Grinder for sale (2,752)

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg Ledpfx Amewrxqxsreac

Condition: used, Year of construction: 2009, Three knife trimmer Müller Martini Orbit (3675) Year: 2009 For three side trimming of book blocks and brochures, operable in connection with soft- and hardcover book production lines. Description: - Colour monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 72 mm Maximum size (cutted): 304 x 303 mm Ledpfswuthwsx Amrjac Minimum size (cutted): 136 x 70 mm Book thickness: 2 - 80 mm Max. mechanical speed: 1.000 to 7.000 cycles/hr Condition: This machine is offered fully cleaned and checked in good running condition Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2001, Three knife trimmer Lsdsylblkopfx Amrjac Müller Martini Merit S Year: 2001 Hour counter: 30400 Description: - Digital display - Infeed conveyor from the left - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 434 x 310 x 80 mm Minimum size (cutted): 136 x 100 x 2 mm Max. mechanical speed: 1.000 - 4.000 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Gea combiGrind 200 frozen block grinder. In lovely condition. Has been fully checked over. stainless steel worms. Laodpjy U Hrisfx Amroc

Condition: excellent (used), Countersink drill bit Reaming cutter Lajdjd Sgvfspfx Amrec Manufacturer: Bilz HSS (High-Speed Steel) Various sizes Ø 32 mm Ø 34 mm Ø 38 mm Ø 39 mm Ø 40 mm Ø 44 mm Ø 45 mm Ø 47 mm Ø 49 mm Ø 50 mm Ø 52 mm Ø 57 mm Ø 60 mm Ø 62 mm Ø 65 mm Ø 68 mm Ø 70 mm Ø 71 mm Ø 74 mm Ø 75 mm Ø 80 mm Ø 85 mm Ø 88 mm Ø 96 mm Ø 125 mm Individual sale possible.

Condition: excellent (used), Flax cutter Manufacturer: Bilz Carbide Various sizes: Ø 32 mm Ø 34 mm Ø 39 mm Ø 44 mm Ø 47 mm Ø 49 mm Ø 50 mm Ø 52 mm Lodpfed Sgvdox Amrsac Ø 57 mm Ø 60 mm Ø 62 mm Ø 65 mm Ø 68 mm Ø 69 mm Ø 70 mm Ø 72 mm Ø 74 mm Ø 75 mm Ø 80 mm Ø 87 mm Ø 90 mm Ø 92 mm Ø 107 mm Ø 117 mm Individual purchase possible.

Condition: used, Herkules Siegen LAB250H Roll grinder Model LAB250H 20 ton capacity Single head 1000mm swing 6500mm between centres 900mm chuck Ledpfx Aey U Hdfomroac Power tailstock Waste conveyor

Condition: used, Herkules WS1100 x 7000 CNC roll grinder (re-manufactured by Metex - Year 2011) Model WS1100 x 7000 18 ton capacity 1100mm swing 7000mm between centres Single saddle 700mm chuck Lodpfx Ajy U Hc Ijmrjac Lismar roll inspection Waste conveyor Siemens Sinumerik 840 DSL controls Safety fence

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Lajdpfxeif Ek Re Amroc Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device Lasdpfofnlkwox Amrec User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23087A, SPECIFICATION Laodpfxsvntgus Amroc Maximum grinding surface 140 x 300mm Distance between column and wheel axis 300mm Max.distance between table and wheel 280mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0.01mm Size of cup wheel 2.2kW Wheel speed 2840rpm Approximate weight 400kg MACHINE EQUIPPED WITH 260mm x 140mm x75mm (thickness) magnetic chuck Coolant system Guarding

Condition: good (used), Pearl mill, agitator mill, shredder, crusher, grinding mill, counter blade, crushing blade, counter cutter -Counter blade: Length 640 mm -Hole spacing: 173 mm / bore Ø 22 mm -Number: 3 knives available -Price: per piece -Dimensions: 640/150/29 mm -Weight: 21.3 kg/pc. Lodpfxezcu Duj Amrsac

Condition: excellent (used), Year of construction: 2020, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 808482, Excellent condition 2020 Rollomatic ShapeSmart NP50 CNC pinch & peel grinding machine. Fully operational and under power. Includes latest software package, Comat coolant filtration/temperature control system, Marcus checking system, loader pallet sets, ultra precision collets, grinding wheels, tooling and accessories. Immediate availability, inspection and demonstration welcome by appointment. The high-speed tool loader, designed by Rollomatic and integrated into the basic machine, was developed with fast setup and ease-of-use in mind. This is achieved by using pre-calibrated cassettes and clamps to hold different diameters without resetting the position. Rollomatic automatic loaders are known to be the fastest and most reliable in our industry. Fast to set up Capacity up to 1’000 parts Robust, low maintenance design Checking and measuring the part immediately after machining is essential to guarantee the quality of the production. The post-process measuring system immediately transmits the compensation value that may be necessary to achieve production within the planned tolerances. Accuracy & reliability Compensation of the grinding wheel position Constant production quality The Smart Touch Probe is a contact measurement system that allows the blank position to be defined before grinding and avoids variations during production. The system also compensates for machine thermal drift caused by changes in ambient temperature. Runout compensation and core diameter measurement Setting assistance Superior stability during the production process Elimination of scrap during unattended production The StickSmart® is an automatic sticking system for in-process cleaning of grinding wheels. The «stick», mounted in a holder, is used to regenerate superabrasive grinding wheels to maintain their cutting performance. Extends the working life of the wheel Laodpfx Aey Udwvjmrsc Extends unattended production cycles with high-performance wheels Reliable and safe automatic process for the operator. Efficient, economical and safe solutionSimple and efficient, the right-side door has been designed to facilitate the work of the operator when changing the orientation of the grinding wheels. Ergonomics for the operator Secure opening Guaranteed tightness

Condition: ready for operation (used), OMN RV500 bowl grinder Transport dimensions: 100x70x185 cm (LxWxH) Table dimensions: 160x300 mm Location: Hamont-Achel, Belgium The seller is not liable for typographical or data transmission errors. The machine is in accordance with its age in terms of appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT OMN RV500 cup grinder Transport dimensions: 100x70x185 cm (LxWxH) Table dimensions: 160x300 mm Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Lajdpsurm Ucsfx Amroc OMN RV500 Schüsselmühle Transport dimensions: 100x70x185 cm (LxWxH) Tischabmessungen: 160x300 mm Standort: Hamont-Achel, Belgium Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: good (used), double grinder, double grinder, column grinder, column grinder, drill grinder Ledpfx Aedzxklomreac -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 2 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale: 4 x Tacchella PROFLEX C3 / PROFLEX 3 C1 LR/R-B CNC external/internal cylindrical grinding machines. All four machines are from the year 2023 and are equipped with Siemens SINUMERIK ONE CNC controls. They feature hydrostatic guides, a CNC B-axis, an LR/R-B grinding head configuration, Marposs measuring/process monitoring, AE gap crash monitoring, grinding wheel balancing system, workpiece spindle, tailstock, external and internal cylindrical grinding capabilities, and automatic workpiece handling. Lodpfezdv S Iox Amreac The machines are designed for medium to large-sized workpieces. According to the PROFLEX C3 parameters, the maximum grinding diameter is up to 600 mm, the maximum workpiece weight between centers is up to 400 kg, the distance between centers is 800 – 2,100 mm, and the maximum grinding length is 400 – 1,600 mm. Clean note in the offer:

Condition: used, Manufacturer: Gendron Type: RU 28-100 Max. grinding length: 1000mm Max. grinding diameter: 280mm Center-height: 155mm Table: 1660x150mm Grinding wheel: 300mm Machine-dimensions: 2700x1550x1500mm - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Ljdswnhkmjpfx Amreac

Condition: used, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, Empty weight: 3.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 4.5 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 510 - Table width [mm]: 800 - Table depth [mm]: 350 - Magnet width [mm]: 600 - Magnet depth [mm]: 350 - Max. grinding wheel diameter [mm]: 350 Lasdpfx Amoxpgwrorjc - Motor power: 4.5kW - Transport dimensions: 2600mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1976, Cylindrical cylinder grinding machine Model: Int+Ext Conventional Manufacturer: PONAR  Type: RUP 28x1000 Center distance: 1000mm Center height: 155mm Grinding diameter: 310mm Travel x: 1000 Table dimension length: 1650 Table dimension width: 150 Transport dimensions Dimensions part 1: 2900x1600 Weight: 1800kg Dimensions part 2: 1200x800x600 Weight: 100kg Dimensions part 3: 1250x1210x1440 Weight: 150kg Dimensions part 4: 1200x800x11001 Weight: 200kg - Year: 1976 - Documentation available: No - CE certificate present: No Financial information Laedpfx Aewnhfdomrsc VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, Empty weight: 21.000 kg Price: On request - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 430290898 - Drive system: CNC - Power [kW]: 60.0 - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 900 - Z-axis travel [mm]: 550 - Table width [mm]: 2000 - Table depth [mm]: 900 - Magnet width [mm]: 1500 - Magnet depth [mm]: 800 - Max. spindle speed [rpm]: 3000 - Options: Filter system - Control type: Unicon - Motor power: 60.0kW - Transport weight [kg]: 21000kg Financial information Lajdpfx Aox E Ukujmrec VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,000 mm, total length: 1,900 mm, total width: 1,700 mm, Empty weight: 1.500 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 12389 - Drive system: Conventional - X-axis travel [mm]: 670 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 400 - Table width [mm]: 800 - Table depth [mm]: 200 - Magnet width [mm]: 630 - Magnet depth [mm]: 200 - Max. grinding wheel diameter [mm]: 240 - Transport dimensions: 1900mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Laodewh Npkepfx Amrec Lukas van Rossum

Condition: used, total height: 2,150 mm, total length: 1,900 mm, total width: 1,600 mm, Colour: Green Empty weight: 2.200 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 14299 Ledpfx Ajzat I Homreac - Drive system: Conventional - Power [kW]: 3.6 - Number of axes [pcs]: 3 - X-axis travel [mm]: 630 - Y-axis travel [mm]: 200 - Z-axis travel [mm]: 320 - Table width [mm]: 800 - Table depth [mm]: 200 - Magnet width [mm]: 560 - Magnet depth [mm]: 200 - Max. grinding wheel diameter [mm]: 250 - Max. grinding wheel thickness [mm]: 50 - Transport dimensions: 1900mm x 1600mm x 2150mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Support belt grinder Lsdpfxoyv A Dqs Amroac Brand: Lehnert Contact wheel width: 50 mm Contact wheel diameter: 250 mm Belt size: 2000 x 50 mm Motor power: 1.5 kW 380 Volt 2830 rpm

Condition: new, ROGI surface grinder, type FSG-4080A Table dimensions ----- 406 x 813 mm Longitudinal travel of the work table ----- 900 mm Transverse travel of the work table ----- 450 mm Overhang ----- 580 mm Max. permissible workpiece weight ----- 500 kg Ljdpfxoga T Iaj Amrsac Grinding wheel ----- 350×40×127 mm Motor ----- 4 kW Weight ----- 3400 kg Machine dimensions ----- 3600×2630 mm

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Grinding disk diameter 500 mm Lsdpfx Amezddvvsroac Throughput capacity approx. 200-800 kg/h depending on material and fineness