Used Kf 4000 for sale (3,003)

Condition: used, Year of construction: 2016, Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Pgodpfx Aksz H N Hheieu Technical data - Manufacturer: Scaligera - Model: ULISSE 4000 - Year of manufacture: 2016 - Machine type: sleeve labeler with steam shrink tunnel - Output: up to 4,000 cans/h - Containers: sleek and standard cans - Machine direction: left to right - Power supply: 400 V, 3-phase, 50 Hz - Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) - Max. current: sleever 7 A, steam tunnel 10 A - Compressed air (sleever): 6 bar - Steam supply (tunnel): 6 bar, up to 200 kg/h - Weight: sleever approx. 850 kg, steam tunnel approx. 350 kg - CE mark on both machine plates Equipment - Scaligera ULISSE 4000 sleeve applicator with infeed screw and guarded, windowed housing - Scaligera TVP2SE steam shrink tunnel (2016) with two inspection windows and pressure gauges - Electrical control cabinet with push-button operation and signal tower Condition Used. The machine was in production until early September 2023 and is now dismantled, so it cannot be shown in operation. Sold without warranty. Availability Immediately. Location: Belgium.

Condition: good (used), Year of construction: 2007, CNC traveling column milling machine Manufacturer: KEKEISEN Machine model: UFF 4000/16 Control system: Heidenhain iTNC 530 Year of manufacture: 2007 TECHNICAL DATA X-axis travel: 4000 mm Y-axis travel: 1400 mm Z-axis travel (vertical): 1600 mm Table area: 4200 x 1500 mm Table load: 10 t Spindle speeds (gear stages): 20 – 7000 rpm Spindle drive: 30 kW Rapid traverse: 18 m/min Machine weight approx.: 24.0 t + table Pgjdpfxez Ear Sj Akisu EQUIPMENT FEATURES + CNC control system HEIDENHAIN iTNC 530 with fast MC424 + X-axis with hydrostatic guidance + B-axis with stepless swivel function + Air, water supply through the spindle and spray ring + Edge gap filter for water purification + Additional tank and pump for deep hole drilling at 80 bar + Minimal lubrication system + Chip conveyor with water pump and water tank + Cooling unit for hydrostatic guidance + Cooling unit for spindle and gearbox cooling + NC dividing head WALTER TABIH Evolution 320 EG, year of manufacture 11/2014, with horizontal table axis and tailstock MK6, center height 320 mm, max. Subject to changes and errors in the technical data and specifications.

Condition: ready for operation (used), Wingspan: 3950 mm Pjdozp Iqgopfx Akisgu Overall height: 3650 mm Load capacity: 4000 kg without lifting device

Condition: used, Year of construction: 2019, Technical details: voltage: U1: 400V V open-circuit voltage: 70 V weight of the machine approx.: 100 / Gerät kg dimensions of machine: ca. 0,85 x 0,37 x 1,25 pro Gerät m 4 Fronius TransPuls welding systems available Can be used for industrial applications, e.g. robots. Areas of application: Welding process “CMT”, for all MIG/MAG welding work mobile, 4 wheels / 2x of which swivel with wire feed type: VR 7000-CMT: Wire feed speed 0.5 - 22 m/min; use of possible wire Ø 0.8 - 1.2 mm Pgodpfou Nwhiex Akisu RCU5000i univoSD remote control 1 meter intermediate hose package Trolley Protection class IP 23 AF cooling type Operation via display RCU 5000i i.D. *

Condition: used, functionality: fully functional, Maba longitudinal circular saw, 4200 mm cutting length, non-tilting. Pgedpfxezxbh Re Akiou

Condition: excellent (used), functionality: fully functional, AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 Pedpfxjwlzz Te Akiegu second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n.2 motors of 0.55 Kw at 12000 rpm supplied, in addition, n.02 tilting trimming and cornering groups. n.2 motors Kw 1,15 at 12000 rpm 6. glue scraper group for cleaning glue residues supplied with 2 glue scraper groups, as spare parts 7. overlapping brush group for brushing and polishing the applied edges - n.2 motors at 1400 rpm , tiltable 8. dryer unit 0-600° - 1400 watt 9. contour trimming unit model STEFANI TRIM/60 . external unit HF high frequency converter volt. 380/50

Condition: excellent (used), Thompson mixer grinder 4000. All s/s. Podpfx Akszrl Ihoiegu

Condition: good (used), Year of construction: 2016, Contact us for more information Psdpfsy Enr Sjx Akiogu

Year of construction: 1986, condition: ready for operation (used), OFFERED FOR SALE DUE TO OVERCOMPLETION: Well maintained second hand hydraulic press brake, brand LVD, equipped with front support Model PPN 125/4000 S630 Built in 1986 TECHNICAL CHARACTERISTICS Max. pressure force 1250kN Max. oil pressure 310bar Max. working length 4000mm Max. passage between the uprights 3150mm Max. stroke of the ram 150mm Distance table / ram 350mm Unloading 250mm Width of table 180mm Closing speed 90mm/s Working speed 7mm/s Return speed 55mm/s Motor power 10kW Approximate weight 13500kg Pgsdpfxor Ezv Ue Akiou Steered axes Y1,Y2,X STURING CNC TOUCH S-630 (New 2019) Very user-friendly Full touch screen (10") control with 2D graphic simulation controlled axes: Y,X,R cnc backgauge X-duo - R back gauge with 2 movable fingers ADDITIONAL TOOLS F10 H180 26° 7x508mm + 1x550mm in sections Multi-V M90 L4000mm Asking price excluding transport costs (for buyer). Note: only serious bids will be responded to!

Condition: good (used), functionality: fully functional, Year of construction: 1989, Sheet metal width: 4050 mm Pgodpfxjz I Ttne Akiju Sheet metal thickness: 4 mm Machine weight (approx.): 9,000 kg

Condition: used, functionality: fully functional, Year of construction: 2012, load capacity: 4,000 kg, The crane was in working order until it was dismantled. Its span is 4.3 m and its lifting capacity is 4000 kg. It is sold without any warranty or guarantee. Pjdpjz Iynlsfx Akiogu

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: Beckof, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, sheet thickness (max.): 300 mm, overall weight: 819,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,800 mm, 4 roll plate bender HAEUSLER - VRM-HY 4000/300 MACH-ID 9871 Make: HAEUSLER Type: VRM-HY 4000/300 Control: BECKHOF YOP: 2010 Minimum mending diameter 1720 mm Distance Top to Lower roll 300 mm Pressing force Lower to upper roll 7200 Ton Roll quality 60CrMoV 12.5 with strength 900-1050 Nm/mm2 Controll panel with Bend-iT (Beckhoff) Largest machine build ever by haeusler (1 off 2 in World) Rolling CANS, VESSELS, BOILERS Components for SMR / AMR steam drums, high-pressure systems Small Modular Reactors and Advanced Modular reactors Power generation sector ; Offshore Market Rolling width: 4000mm Rolling thickness 3x toproll Ø:250mm Rolling thickness 5x toproll Ø:300mm Rolling thickness prebending: 270mm Top Roll Ø: 1500mm Bottom Roll Ø: 1450mm Podpfx Ako Ad Uccjijgu Side roll Ø: 1100mm Number of rolls: 4 Rolling speed: 1,2 + 2,4 + 3,6 M/Min Number of driven rolls: 2 Power: 700kW Length: 15000mm Width: 7200mm Height: 7800mm Weight: 819000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2002, condition: good (used), functionality: fully functional, Hydraulic Lifting table with 4000 Kg lifting capacity. Driven rollers on top. Length 5.4m width 1.3m Pgjdpjz I I I Tefx Akisu Extra roller conveyor length 3.1m Width 1.3m with Sew motor 1.1 Kw

Condition: used, functionality: fully functional, Year of construction: 2005, load capacity: 2,500 kg, Abus crane with a lifting capacity of 2500 kg. Reach of 4000 mm from the axis of rotation, height under the hook of 2595 mm. Electric rotation of the jib and electric travel of the hoist. Sold without warranty or guarantee. Pgsdpfx Ajz Iywmjkisu

Condition: ready for operation (used), functionality: fully functional, ROMEC PRESS BRAKE 4000 X 125 TON DISPLAY ON 2 AXES Pgedey Nc Ivspfx Akiou MOTORIZED BACKGAUGE USED MACHINE INTERNAL CODE SVR 136

Condition: used, operating hours: 6,983 h, lifting height: 4,950 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), fork length: 1,200 mm, General information Year of manufacture: 2019 Podpez I A I Iofx Akiegu Year of construction: 2019 Weights Empty weight: 6.980 kg Functional Lifting capacity: 4.000 kg Maximum passing height: 322 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: duplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Pneumatic shaped solids - Roof window = More information = Make of engine: kubota Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW Pedpfx Akszxc Swjiogu - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE Psdpfx Aksrq D D Esiegu 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available

Condition: good (used), overall weight: 13,000 kg, total width: 2,200 mm, total length: 8,000 mm, total height: 3,300 mm, Flanging and dishing machine BOLDRINI - RIBO 20HY/4000 BOLDRINI RIBO 20HY/4000 Hydraulic Flanging & Dishing Machine. Capacity up to Ø 4,000 mm. Suitable for manufacturing dished ends, pressure vessel heads and tank bottoms. Length:8000mm Pjdozil H Espfx Akijgu Width:2200mm Height:3300mm Weight:13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, Technical Data Max. workpiece diameter: 3,800 mm Max. rotational speed: 100 min⁻¹ Workpiece clamping: manual Chuck: Röhm Tool holder: Capto C8 Tool magazines: 2 × 47 slots (94 slots total) Travel Paths X1-axis (right support): 3,200 mm X2-axis (left support): 2,800 mm Z1-axis (right support): 750 mm Z2-axis (left support): 750 mm Workpiece Spindle Speed range up to 100 min⁻¹ Nominal power: 67.4 kW Maximum power: 202.2 kW Max. torque: 71.6 kNm Max. table load: 35,000 kg Water-cooled motor spindle Multifunction Head B-axis with stepless positioning Swivel range: 180° Driven tools up to 6,000 min⁻¹ Hydraulic clamping Direct measuring system High-pressure cooling up to 70 bar Tool Magazines 2 chain magazines with 47 slots each Tool diameter up to 120 mm Up to 150 mm with appropriate magazine configuration Max. tool length: 400 mm Max. tool weight: 20 kg Chip and Coolant System 2 Knoll chip conveyors Pgsdpfxezwa Rbo Akisu Knoll band filter system KF400-2300 Electrical Data Operating voltage: 3 × 400 V AC Protection class: IP55 Connected load: 280 kVA Control: Siemens SINUMERIK 840D sl Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, ZIM Hülsta Body Uprighting Device This body uprighting device is used to upright and further transport assembled bodies. Body uprighting devices are typically used with body presses that have a continuous flow system. It simplifies handling when setting up large workpieces. Transport and assembly device within a body assembly line. Behind a continuous flow body press, the pressed bodies are placed on their back using this device. Psdpfxevdb Ixo Akiegu Assembly work on the underside can thus be carried out. Manufacturer: ZIM Hülsta-Werke Type: Body Uprighting Device Dimensions: Roller conveyor L x W x H: 2800 x 900 x 800 mm Roller width: 800 mm Tilting area: L x W 1000 x 900 mm Power supply: 3x400 V AC Connected power: 2 kW You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2011, Demmeler Turning Unit Robotix IP 4000 Max. height: 3500 mm Psdpfxow Rq Ths Akisgu Servo-hydraulic drive Length: adjustable from 1000 to 12,000 mm Permissible weight: 11,000 kg Rotation: 360 degrees endless

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with skew rotator bevel cutting head Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with skew rotator bevel cutting head Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing Pgjdpfx Aksx Dlwmsiou 80 mm cutting Extraction table Beuting without filter system Software: Omniwin with Bevel 191026ä

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp! Pgjdpfx Aey Uzhfskiju

Condition: used, Year of construction: 2016, Injection moulding machine Pgsdpfxeyqwfdj Akieu Type: Arburg 820S 4000-4600 Year of manufacture: 2016 Injection volume for PP = 2850 ccm Injection weight for PP approx. 2450 g The machine is offered without peripherals, handling equipment or safety fencing – purely the machine itself.