Used Italy for sale (1,345)

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Powder coating booth open spray booth Dimensions of the powder booth Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 fan 6000 m³/h Power 3 kW (electric motor) Filter 4 pcs. type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 pcs. 1" "Turbo" Italy Absolute filter 1 pcs. pocket filter type Wagner "Prima Sprint" powder gun Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour Powder combustion furnace Internal dimensions length 3,225 mm Internal width 1,400 mm Internal height 2,000 mm Insulation Rock wool 150 mm [75 kg/m³] Temperature Max. 220°C Fans 1 unit 4,500 m³/h Electric motors 1 pc. 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal output 39 kW Doors on both sides 2 manual, insulated with rock wool 150mm 70Kg/m³ Indirect heating via thermoblock, Heating chamber Tubular heat exchanger Burner* 1 electric heater Steel support for fastening conveyor technology IPE 80 Bwodpfx Agsb Dxnwezei *Choice of gas, oil or hybrid for an extra charge Manual conveyor technology Substructure Steel profiles IPE and SQ Bends 9040C 90 degrees, radius 600 mm 4 pcs. Rail system no. 9040 27m Roller units 9842 GLRHT 16 pcs. Connectors 9041 M 12 pcs. Fixing clamps 9047/100 16 pcs. Manual tongue switch 45 degrees 9401 AIYM 2 pcs. Load carrier L = 1000 mm 8 pcs.

Condition: new, Year of construction: 2025, functionality: fully functional, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, 1. powder coating booth, open spray booth The overspray during powder coating is collected by the suction unit. The powder spray booth is supplied on castors and is therefore mobile. - The extraction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. 1 Dimensions of the powder level Width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x800 [mm] 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter 2. powder combustion furnace 1 Internal dimension length 4,000 mm 2 Inner dimension width 1,500 mm 3 Internal height 2,200 mm 4 External dimension incl. thermoblock length 5,250 mm 5 External dimension incl. thermoblock width 2,050 mm 6 External dimension incl. thermoblock height 2,530/2,750 mm 3. switch cabinet Bwsdpfx Agsffwfxozoi 4 Manual conveyor system The "Mantion system" conveyor technology is designed for max. 250 kg per product carrier and 750 kg/ trolley.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table length: 6,000 mm, table width: 2,000 mm, table load: 17,000 kg, Travelling column milling machine | FPT Sirio-M50 - Heidenhain control system Bwsdpjxzzlhefx Agzsi - 60-position automatic tool changer - Coolant treatment and filtration unit - Chip conveyor - Cooling unit, manufacturer Deerosdassi (Italy) - Electrical cabinet - Full machine enclosure (protective housing) An inspection is possible at any time by appointment.

Condition: as good as new (ex-display), Code: 0314 Brand: FELDER Model: FB 710 - CE Standard Precision band saw for cutting wood, plastics, composite materials, aluminium and various other materials - CE standard - Year 2025 Technical data: Flywheel diameter 700 mm Table size 700 x 840 mm Cutting width 690 mm Cutting height 460 mm Motor power Hp 7,5 Table tilt -5 +45° Suction inlet diameter 120 mm Weight kg 400 MACHINE EX SHOWROOM Bwjdpfjynlqcsx Agzsi

Condition: good (used), Code: 0313 Brand: LOGOSOL - SWEDEN Model: PK 1500 - CE Standard Cut-off machine for wood stacks, boards - CE Standard Technical data: Easy to use Simple chain replacement Accuracy up to +/- 2 millimetres Three-phase electric motor 5 kW Guide bar length 150 cm Cutting dimensions with bar 168 cm - Max width 1442 mm - Max height 1450 mm Measuring rod to help measure the length of stacks Chain lubrication oil tank Sturdy wheels with locking mechanism for moving Suction port connection 120 mm Spare chain Bwsdpfxoynllts Agzji Overall dimensions mm 2600 x 1200 x 1850 h Weight kg 266

Condition: good (used), Code: 0312 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 11 - Norme CE Bedpfx Aoynk Dnogzowi Automatic calibrating sanding machine with 2 belts and movable head for furniture, carpentry, custom-made furnishings, panels, solid wood, tables, composite materials and various - CE Standard Steel enblock Conveyor plane provided with a thick rectified steel structure Sanding belt motors placed inside the base Rubber conveyor belts structured in 3 cloths and sectionated in rings for constant centering on the plane Base with thickness sheet up to 30 mm Movable head using big lifting columns Technical data: Working width 1350 mm Working thickness 3-130 mm Fixed working surface height 900 mm Feed speed from 5 to 30 mt/min Belt dimensions 1400 x 2620 mm Working thickness display Composition: 1° Group Steel Calibrating Roller diameter 280 2° Group Rubber Sanding Roller diameter 300 Cleaning brush - Motor 2 Hp - Suction inlet diameter 160 Total power 57 kW Compressed air 7-8 bar Overall dimensions mm 2100 x 2300 x 2400 h Weight kg 5500

Condition: good (used), Code: 0311 Brand: CIT MECCANICA Model: V 25 / KS Fully automatic and very precise sharpening and setting machine for band saw blades (normal and spaced teeth) and for sharpening for circular saw blades Technical features Bwsdpfx Ajynkt Aogzsi Minimum pitch of saw teeth 2 mm Maximum pitch of saw teeth 20 mm Maximum width of bandsaw blades 50 mm Minimum diameter of circular blades 110 mm Maximum diameter of circular blades 600 mm Grinding motor 0,12 Kw Main motor 0,20/0,25 Kw Teeth sharpened per min 35 and 70 Diameter of emery wheels 175 mm Speed of grinding wheel 3000 rpm Gear-box oil SAE 30 1,5 Kg Weight 115 kg

Condition: good (used), functionality: fully functional, pressing force: 1,500 t, table width: 2,440 mm, table length: 4,572 mm, die cushion stroke: 360 mm, clearance between the columns: 4,800 mm, stroke length: 1,320 mm, Equipment: documentation/manual, Manufacturer Muller Model BZE 1500 Year 1980 Excellent condition Stock number cod.0313 Thrust: 1500 ton. Thrust points: no. 6 Slide stroke: 1320 Maximum sled opening:m 2,620 mm. Maximum slide closure:m 1,300 mm. Slide size: no. 6 Table size: 4,572 x 2,440 mm. Stroke premiums bottom plate: 360 mm. Useful front passage: 4,800 mm. Bwsdpoq Hdz Uofx Agzoi Lateral passage in the shoulder: 2,600 mm. Pull-out carriage with possibility in the upright Location :Italy

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, number of seats: 55, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, parking heater, STANDARD FEATURES ? Reclining backrest ? With handle in the central aisle OPTIONAL FEATURES ? 3-point seat belt for each seat ? Adjustable center armrest with upholstery ? Fabric upholstery SEATS ? Adjustable Lineo passenger seats ? Seat color: Laura 23245105 3017/PM5006065058 ? Headrest: Valencia 107-4001 ? Mushroom base: PN5006062772 DOORS ? Door opener on the left of the dashboard ? Door 2, external opening 800 mm, single-leaf ? 4 red “Emergency” buttons BODY ? Water-repellent plywood floor edge cut-outs Paintwork & Decoration ? Enhanced corrosion protection for underbody Paint color ? RAL 9010 Exterior equipment ? Mud flaps on all axles Flooring ? Sealed joints of flooring under body molding Handrails/Partitions ? Partition wall coated with cement fiberboard ? Divider pipes (epoxy coating) RAL 7004 Window blinds ? Prepared for blinds on side windows Luggage racks ? Interior parcel shelf Flooring ? FL021 Gayawood 4521 Yellowstone Radio ? Dual-zone radio AM/FM/DAB+, USB and SD card slot DIN Microphone ? 1 microphone for the driver and 1 for the hostess OPTIONAL ? 13-pin trailer socket HEADLIGHTS ? Fog lights ? Xenon warning lights with door opening assistant STOP REQUEST ? STOP REQUEST WITH LIGHT AND BELL CONNECTION WINDOWS ? All doors single glazed ? Rear window single glazed ? Windscreen with standard defroster ? All windows non-opening ? Double glazing ? Emergency shut-off switch with chain ? Driver’s window double glazed VENTILATION ? 2 manual roof hatches HEATING ? Reinforced convectors for passenger compartment ? DEL EXTRA WATER TANK FOR HEATING ? SPHEROS HEATER WITH PRE-HEATED NOZZLE AND REINFORCED WATER PUMP AIR CONDITIONING ? Air conditioning + auxiliary heating 32 kW DRIVER’S CAB ? Reversing camera ? ADDITIONAL SUN VISOR FOR LEFT EXTERIOR MIRROR DRIVER’S SEAT ? STANDARD DRIVER'S SEAT WITH INTEGRATED HEADREST – TOP SPEC ? Armrests left and right on driver’s seat DRIVER’S AREA ? Electric front curtain and manual side curtain ? Clothes hooks for driver and co-driver ? Air conditioning for the driver LUGGAGE COMPARTMENT ? Luggage compartment with door ? Heated driver’s seat DRIVER’S COCKPIT ? Digital tachograph Dtco 4.1 Smart HOSTESS ? Tiltable hostess seat ENGINE ? 2500 RPM ? Engine power 320 HP / 235 kW ? Speed limiter 100 km/h ? Diesel filter heating for Webasto ? FUEL TYPE: Diesel + HVO AUTOMATIC TRANSMISSION ? AUTOMATIC TRANSMISSION ZF 6AP1220B ? KEY PAD FOR AUTOMATIC TRANSMISSION LEFT OF DRIVER OUTSIDE THE DRIVER’S POSITION – 6 BUTTONS REAR AXLE ? REAR AXLE RATIO 5.63 SUSPENSION Bwsdpfx Agexxw Tpezji ? Shock absorbers ? Air suspension ? Lowering function BRAKING SYSTEM ? INTERCITY BRAKE PADS TYPE ? FAE ITALY FUEL TANK ? FUEL CAP & KEY ? Fuel tank capacity 430 l (310 l + 120 l) WHEELS AND TIRES ? Standard on-board tool kit ? Spare wheel carrier with spare wheel WHEEL NUT COVERS / RIM COVERS ? Wheel nut covers front TIRES ? TIRES 295/80R22.5 – FAST ON ROAD/SNOW 152/148 ? X MULTIWAY 3D XZE + XDW ICE GRIP

Condition: new, Cucinesse Evolve Kitchen Showroom display model, unused Evolve Made in Italy The Evolve collection is featured in the "Light On Design" catalog, a curated project celebrating the perfect fusion of artisanal precision and industrial expertise. With its sophisticated design and meticulous attention to detail, the Evolve model creates an inviting and tactilely appealing space where materials take center stage. Manufacturer: Cucinesse Italy Model: Evolve Sand-Beige Type: Kitchen Island Worktop: Trespa Marble Effect Nero Street Worktop Height: 94.5 cm Kitchen Island Length: 362.5 cm Kitchen Island Width: 103.5 cm Kitchen Island Height: 94.5 cm Washbasin: Reginox Undermount 50x40 cm Dishwasher: Beko BDIT38531DC 60 cm Refrigerator: Miele K7733E, 178 cm, 320 Liters, Soft-Close Cooktop: Bora Puxu Induction Cooktop with Extractor, 83x50 cm Tap: Not Included Oven: Not Included Tall Cabinets Length: 300 cm Width: 60 cm Height: 220 cm Without Gaggenau steam oven, Gaggenau vacuum drawer, and Faucet Disassembly and removal by buyer Disassembly by our installation team is also possible (€1200) Item location: Utrecht, Netherlands Financing through our bank is also possible. Bodsx Eyrwopfx Agzswi komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request

Condition: good (used), Code: 0308 Brand: AGLA Model: 900 Roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials Sturdy structure Table dimensions mm 2950 x 850 Working width mm 900 Working height mm 700 Brush diameter mm 300 Motor Hp 10 Automatic table lifting Overall dimensions mm 3100 x 1750 x 1650 h Bwedeympwqopfx Agzoi

Condition: used, - Type: Professional deck oven with open front - Configuration: 5 levels × 3 decks = 15 doors - Energy supply: Triple energy (gas / wood / diesel) - Heating system: Annular tubes for uniform heat distribution - Useful depth: 2,200 mm - Condition: Near new, only used for commissioning and ignition tests - Previous usage: No commercial production, exclusively technical trials - Structure: Fully stainless steel, durable and easy to maintain - Baking surface: Refractory stone deck - Controls: Manual adjustment - Working temperature: Up to 300°C - Insulation: High-density, minimizing heat loss and energy consumption - Overall dimensions: Large build suitable for production facilities - Production capacity: Ideal for high-throughput baking (bread, pizza, viennoiseries, etc.) - General condition: Excellent - New value approx. €120,000 The Continental Forni 5 x 3 deck professional deck oven is a benchmark for artisan bakeries and high-volume production units. Made in Italy, it combines robustness, performance, and versatile energy options. With its 5 levels and 15 independent chambers, it ensures even and continuous baking of bread, pizza, or viennoiseries. Bodpfxjyg H A Rj Agzjwi A powerful, versatile deck oven This open-front deck oven operates with three energy sources: gas, wood, or diesel. Its annular tube heating system ensures uniform heat distribution across the refractory stone surfaces, guaranteeing traditional, golden, and crisp baking while optimizing energy consumption. Main features • Brand: Continental Forni • Type: Professional deck oven with open front • Configuration: 5 levels × 3 decks = 15 doors • Useful depth: 2,200 mm • Heating system: Annular tube • Energy: Gas, wood, or diesel • Refractory stone baking surface for traditional results • Construction: Full stainless steel • Maximum temperature: 300°C • High-density insulation for energy savings • Manual controls • Condition: Near new, only used for ignition tests Production advantages • Even and consistent baking in every chamber • Flexible operation depending on available energy (gas, wood, or diesel) • Ideal for large-scale baking of bread, pizza, and viennoiseries • Durable, low-maintenance stainless steel structure • Italian quality oven, renowned for its reliability and longevity Recommended applications • Artisan and industrial bakeries • High-output bread production lines • Cooperatives and central baking kitchens Why choose the Continental Forni deck oven This 5 x 3 deck oven is designed to deliver power, precision, and efficiency. Its 2.2-meter depth allows baking large quantities in a single batch. It is the perfect choice for bakers seeking traditional baking with an almost new oven at a reduced price. FAQ – Frequently Asked Questions Does the oven only run on gas? The listing was translated automatically. Translation errors are possible.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 1,451 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,245 mm, total width: 900 mm, total length: 1,796 mm, water tank capacity: 160 l, battery voltage: 24 V, noise level: 65 dB, battery capacity: 320 Ah, empty load weight: 815 kg, Ride-On Scrubber-Dryer Comac Optima 85B – Professional Cleaning Machine in Very Good Condition. The machine has been regularly used as a demonstration unit and, with 1,451 operating hours, is in very good and fully functional condition. Technical data and features: - Model: Comac Optima 85B - Year of manufacture: 2018 - Operating hours: 1,451 h - Drive: Battery-powered (24 V) - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 160 liters - Area coverage: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Incl. battery and charger (brushes not included) Condition: The machine is well-maintained and fully operational, with normal signs of use. All functions have been tested – the unit is ready for operation. Origin: The unit was acquired as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: Technical specifications and descriptions are based on manufacturer information. All details have been provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy, or specific features. The machine is sold as described and inspected, with warranty and liability for material defects excluded. Subject to prior sale, typographical errors, and mistakes. Bodpsxw Rnksfx Agzswi

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, working width: 865 mm, area performance: 10,000 m²/h, total height: 900 mm, total width: 1,005 mm, total length: 1,796 mm, water tank capacity: 160 l, battery voltage: 24 V, noise level: 65 dB, battery capacity: 320 Ah, empty load weight: 838 kg, Ride-on Scrubber-Dryer Comac Optima 90S – Professional Cleaning Machine in Nearly New Condition. This machine was originally used as a demonstration model at trade fairs and events, which is why it has only 100 operating hours. It is in excellent condition and is fully operational. Technical Data and Features: - Model: Comac Optima 90S - Year of manufacture: 2021 - Operating hours: 100 h - Drive: Battery-powered (24 V) - Brush width: 2 x 450 mm (total approx. 900 mm working width) - Clean/dirty water tank: 160 liters - Cleaning performance: up to 10,000 m²/h - Brush pressure: up to 150 kg - Complete with battery, brushes, and battery charger Condition: The machine is in a very well-maintained, nearly new condition. All functions have been tested – the unit is ready for immediate use. Bodjxw Rndspfx Agzewi Origin: The unit was acquired in the context of an insolvency auction. It is an original Comac product. Country of manufacture: Italy Note: The technical information and descriptions are based on manufacturer data. All details are provided to the best of our knowledge, but no guarantee is given for completeness, accuracy, or specific properties. The machine is sold as described and inspected; warranty and liability for material defects are excluded. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 133 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in near-new condition. The machine was originally used as a demonstration model at trade fairs and events and has therefore only 133 operating hours. It is in excellent condition and fully functional. Technical Specifications and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2020 - Operating hours: 133 h Bwodpfx Agsxw Rmyszei - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 300 litres - Area coverage: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes and charger Condition: The machine is in very well-maintained, as-new condition. All functions have been tested – the device is ready for immediate use. Provenance: The unit was purchased as part of an insolvency auction. This is an original Comac product. Country of manufacture: Italy Note: The technical data and descriptions are based on manufacturer information. All details are provided to the best of our knowledge and belief, but without guarantee of completeness, correctness or specific characteristics. The unit is sold as described and inspected; warranty and liability for material defects are excluded. Subject to prior sale, typographical errors and mistakes.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 1 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in near-mint condition. This machine was originally used as a demonstration model at trade fairs and events and therefore has only 1 operating hour. It is in excellent condition. Technical data and features: - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2020 - Operating hours: 1 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 300 liters - Area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Includes brushes - Battery and charger not included Condition: Bsdoxw Rm Hepfx Agzowi The machine is in a very well-maintained, as-new condition. Origin: This unit was acquired as part of an insolvency auction. It is a genuine Comac product. Country of manufacture: Italy Note: All technical data and descriptions are based on manufacturer information. The details are provided to the best of our knowledge and belief, but without guarantee for completeness, accuracy or specific properties. The machine is sold as described and inspected, with warranty and liability for material defects excluded. Subject to prior sale, typing errors and mistakes.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 36 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – Professional Cleaning Machine in Nearly Mint Condition This machine was originally used as a demonstration unit at trade shows and events and therefore has only 36 operating hours. It is in top condition and fully operational. Bwsdexw Rmmepfx Agzei Technical Specifications and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of Manufacture: 2019 - Operating Hours: 36 h - Drive: 36 V battery drive - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 300 liters - Productivity: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes, and charger Condition: The machine is in a very well-maintained, almost new condition. All functions have been tested – the unit is ready for immediate use. Origin: The unit was purchased as part of an insolvency auction. This is a genuine Comac product. Country of Manufacture: Italy Note: The technical data and descriptions are based on manufacturer’s information. All details are provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy, or particular characteristics. The machine is sold as described and inspected, with no warranty or liability for defects. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – professional cleaning machine in near-new condition. This machine was originally used as a demonstration model at trade fairs and events and has only 1.5 operating hours. It is in top condition and fully functional. Technical Specifications and Equipment - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2020 - Operating hours: 1.5 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (Total working width 850 mm) - Solution / recovery tank: 300 liters - Theoretical area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete including battery, brushes, and charger Condition: The machine is in a very well maintained, almost new condition. All functions have been tested – the device is ready for immediate use. Bsdpfxoxw Rmto Agzowi Origin: The device was purchased as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical specifications and descriptions are based on manufacturer information. All details provided to the best of our knowledge, but without guarantee for completeness, accuracy, or specific properties. The device is sold as described and inspected. Warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 35 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – professional cleaning machine in near mint condition. This machine was originally used as a demonstration model at trade fairs and events and therefore only has 35 operating hours. It is in excellent condition. Technical Data and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2019 Bwjdpsxw Rmaofx Agzoi - Total hours: 35 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (total working width 850 mm) - Fresh/dirty water tank: 300 liters - Area coverage: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Incl. brushes - Battery and charger not included Condition: The machine is in a very well-maintained, like-new condition. Origin: The device was acquired as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical data and descriptions are based on manufacturer information. All details are given to the best of our knowledge and belief, but without guarantee of completeness, accuracy or any specific properties. The device is sold as described and inspected, with no warranty or liability for material defects. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 266 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-On Scrubber Dryer Comac C85 B – Professional Cleaning Machine in Near-New Condition Bwodpexw Rl Nofx Agzsi This machine was originally used as a demonstration model at trade fairs and events, thus it has only 266 operating hours. It is in excellent condition. Technical Data and Features - Model: Comac C85 B - Year of manufacture: 2019 - Operating hours: 266 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (total working width 850 mm) - Clean/dirty water tank: 300 litres - Area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Note: Brushes, battery, and charger are missing Condition: The machine is in a very well-maintained, near-new condition. Origin: The device was acquired as part of an insolvency auction. This is an original Comac product. Country of manufacture: Italy Note: The technical specifications and descriptions are based on manufacturer information. All details are provided to the best of our knowledge, but without guarantee of completeness, accuracy, or any specific properties. The device is sold as described and as inspected; warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 48 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in almost as-new condition. This machine was originally used as a demonstration unit at trade fairs and events, and therefore has only 48 operating hours. It is in excellent condition and fully functional. Technical Specifications and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2018 - Operating hours: 48 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh water/waste water tank: 300 litres - Surface performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes and charger Condition: The machine is in a very well-maintained, almost new condition. All functions have been tested – the unit is ready for immediate use. Bwsdpoxw Rkrsfx Agzji Origin: The unit was purchased at an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical details and descriptions are based on manufacturer information. All information is given to the best of our knowledge and belief, however, we do not guarantee completeness, accuracy, or specific characteristics. The device is sold as described and inspected; warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and omissions.

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Bsdpoymfxqofx Agzewi Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Width mm 2000 Height mm 800 Weight Kg. 2000

Condition: good (used), Code: 0306 Brand: VM Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Bodpoymfiijfx Agzewi Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

Condition: good (used), Code: 0305 Brand: MUTI MASTERWOOD Model: OM B1 Bsdpfx Ajyl Uwmjgzswi Hydraulic single-head chisel mortising machine for making precise mortises for wooden windows Technical data: Sturdy cast iron structure Hydraulic movements Hydraulic clamping presses Air jet stroke cleaning and tool cooling system Head motor 3 Hp Control unit pump motor 1 Hp Max head stroke 150 mm Max groove depth 130 mm Vertical head adjustment 100 mm Longitudinal table stroke 400 mm Table dimensions 1000 x 310 mm Work surface height 860 mm Weight kg 700

Condition: new, Year of construction: 2026, Approx. 360 starter bays (more available on request), boltless shelving racks, plug-in system, manufacturer: dalminels, dimensions: 1.30m x 0.60m (other sizes available), frame height: 2.20m (other heights available) – New equipment: Price per starter bay: €119 (net) Price per extension bay: €99 (net) Purchase only by the truckload, otherwise the transport costs may be disproportionately high! Approx. 360 bays fit per truckload (depending on configuration). Manufacturer: dalminels, Italy Model: Errex Year of manufacture: New Finish: Galvanized Frame height: approx. 2.20m (other heights, e.g., 2m available on request) Load capacity per level: 141 kg 5 shelves per bay – additional shelves available at extra cost Shelves approx. 1.30m x 0.60m (shelves consist of 3 panels, each 20cm deep) This system features shelves that slot into rails on the sides. Condition: New delivery time: approx. 4 weeks, usually faster – please inquire for current lead times! Location: Delivery included within Germany Other shelf sizes available on request: For example: Bodpfx Ageyhxmnozewi Widths: 1m and 1.30m Depths: 30cm / 40cm / 50cm / 60cm / 70cm / 80cm Accessories available at extra cost: e.g., drawers, dividers, bracing beams as an alternative to cross braces, etc. Also available as multi-level installations!