Used Italy for sale (1,429)

Year of construction: 1985, condition: excellent (used), UT.MA. Universal grinding machine, type LC-25F Manufactured by UT.MA, Italy Year 1985 Technical specifications: Cgodpjhcfxpofx Afqow Maximum workpiece diameter: 250mm Maximum diameter with vertical clamping head: 400mm Longitudinal movement of the table: 250mm Transverse movement of the grinding head: 200mm Vertical adjustment of the grinding head: 200mm Grinding head can be swiveled 360 degrees Grinding spindle speed: 2800 RPM Motor power: 1 HP Maximum grinding wheel diameter: 150mm Weight: 250 Kg The longitudinal slide runs on a roller guide made of hardened steel. Example photo. Original available soon.

Condition: good (used), Year of construction: 1991, Double-sided, fully automatic hydraulic trimming, milling, and drilling machine PADE NST Double-sided, fully automatic hydraulic trimming, milling, and drilling machine M2fi2 Production of chairs, tables, frames, and furniture components Max. working length 2100 mm Tilt -10° – +45° Rotation -10° – +50° 2 saw blades, diameter 400 mm 2 drilling heads, rotatable 360° left and right, 8 spindles in a cross-shaped grid 2 additional horizontal drilling heads, rotatable 360° from the rear, 8 spindles in a cross-shaped grid 2 milling spindles, drilling shaft 30 mm 1 motor for longitudinal adjustment, 1.5 kW Csdjdqc T Espfx Afqogw 2 saw motors, 2.2 kW 4 drilling motors, 2.2 kW

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Cgsdsyniz Eepfx Afqsw Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Condition: used, Year of construction: 2004, operating hours: 168 h, functionality: unexamined, machine/vehicle number: MA 3004, working width: 920 mm, stack height: 80 mm, product height (max.): 80 mm, control cabinet width: 400 mm, control cabinet length: 100 mm, control cabinet height: 150 mm, motor model: Nordson 3400 V, WRAPMATIC GRM Folio ream wrapper includes logic programs, cable cabins, Siemens operating panel, frequency transformers, sensors, light shells, security lines, Nordson electrical motors, gearbox, transformers, AC source, ream counters, I/O-cards, main lines pressure monitoring switch, roller conveyors, belts, carousel, hot melt pot + hoses, pneumatic cylinders and lot of mechanical details. Capacity 14 reams per minute. The machine operated for around two weeks only as trial. Located in Alexandria, Egypt. Width : 420-1000 mm Length : 530 - 1400 mm Ream thickness (max): 80 mm Ream thickness (min): 15mm 4 position carousel unwind: Roll diameter 800/1000mm Pallet height: 1800mm incl pallet Type of gluing: Hot melt glue Csdpfx Afsxr T Ezeqegw Power: volt 500 - 50 Hz PLC: Siemens S7 Air pressure: 6 bar Location: Alexandria, Egypt

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, PAVAN, Italy PASTA PRODUCTION PLANT, CONSISTING OF: 1. SPAGHETTI LINE Manufacturer: PAVAN, Italy Year of manufacture: 1989 Control: CNC Specification Capacity 1250 kg/h Water consumption 400 l/h Overall dimensions L×W×H 48×7×7 m Line is consisting of Small mixer Large mixer Screw Pre-dryer Dryer ROTOTHERM®, completely overhauled and retrofitted “Night” store Foil packing machine Carton box packing machine 2. NEST PASTA LINE Manufacturer: PAVAN, Italy Year of manufacture: 1962 Control: PLC Specification Capacity 300 kg Water consumption 100 l/h Overall dimensions L×W×H 42×5×5 m Line is consisting of TRABATO press Pre-dryer Dryer Foil packing machine 3. MACARONI LINE Manufacturer: PAVAN, Italy Year of manufacture: 1970 Control: Conventional + PLC Specification Capacity 850 kg/h Water consumption 280 l/h Overall dimensions L×W×H 30×5×5 m Line is consisting of TRABATO press Elevators Pre-dryer Dryer Collection hopper Foil packing machine 4. COUSCOUS LINE Manufacturer: PAVAN, Italy Year of manufacture: 1960 Control: Conventional + PLC Specification Capacity 200 kg/h Water consumption 70 l/h Overall dimensions L×W×H 40×5×5 m Line is consisting of TRABATO press Elevators Pre-dryer Dryer Collection hopper Foil packing machine ----- Cjdpfxexz Hm Rj Afqsgw All the lines are in very good used condition, full working order, still in use and visible under power. More pictures and videos available on request.

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, The log processing line includes the following units: • log splitting band saw – ELCA SNV14 • log handling carriage – ELCA CMOL33 Codjzg Dl Ispfx Afqogw • planer – ELCA PTL1000 • cross-cutting circular saw – ELCA TRCBT3 • multiple-blade rip saw – COSTA LEONE 2160 • log profiling system – VISION_1200 • material handling systems required for servicing the processing line ◦ cross conveyor chain conveyor ◦ roller conveyor • band saw sharpening machine – ALIX AF 518 • dust and chip extraction system – VENTIL VENETA, model PF/JET, designed specifically for the system

Condition: excellent (used), The machine is fully operational and ready for use; specifications are listed on the nameplates. Previously used in the meat industry. Cjdpfx Afjyurywsqjgw

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Cgodpfx Afjyr Awboqsw Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: excellent (used), -Dough capacity: 250 kg -Flour capacity: 150 kg Cjdpewxvlgefx Afqsgw -Bowl capacity: 320 L -Model: scsx banco 250 -Discharge table and divider -Discharge on the left -2 speeds -2 timers -Voltage: 380V -Power: 9 kW

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, year of last overhaul: 2020, Equipment: CE marking, Automatic Bandsaw - Crosscut and straight cut - machine was refurbished in 2020 and is in excellent condition - nice and simple to use - built to last, made in Italy. Codpfx Afey S Dbpsqogw

Condition: new, -Dimensions (LxWxH): 500x840x540 mm -Dough capacity: 50/280 kg -Dough portions: from 30 to 300 g -Voltage: 400 V Cedpfexvxhijx Afqsgw -Power: 0.93 kW -Weight: 74 kg -Compact design, easy to use and clean. -Machine complies with CE standards. -Portioning of dough from 30 to 300 grams. -Portioning error: +/- 5 g from desired weight. -Operates by dough extrusion using a spiral tool. -Equipped with two adjustment systems: sensor and cone. -Entire machine built from stainless steel and aluminum for robustness and easy cleaning. -All parts in contact with the product are removable via handy handwheels and are easily washable without requiring maintenance. -The outfeed hopper is easily removable for replacement of reduction sleeves. -All components are compliant with hygiene and safety standards. -Regular cleaning requires no special maintenance.

Condition: excellent (used), - Dimensions: 518x760x1420mm - Flavours: 2 and mixed Codpfxswxu Srs Afqegw - Output: 17-18L/h - Voltage: 220V - Power: 1.7KW - Net weight: 143kg

Condition: excellent (used), -Dimensions: 430x730x1565 mm -With pump -Hourly output: 40 L -Flavor: 1 -Voltage: 380 V / 50 Hz -Power: 1.6 kW -Condenser: air or water -Manufacture date: 17/7/2002 Cjdpfx Ajwxu Slofqogw -Quality 828 -Serial number: IC 5879 -Software version: AESMD 36 -Net weight: 200 kg

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Cjdpsx H Rmujfx Afqsgw Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), A robust cutting press from the renowned Italian company ATOM. This machine is designed for cutting elements made of leather, rubber, felt, technical foams, cardboard, and other soft materials using steel dies. Cgsdpjzgg Sqjfx Afqjw It is equipped with height and pressure adjustment using a handwheel. The heavy cast iron construction ensures stability and a long service life for the machine. Technical data: Manufacturer: ATOM Model: G777E Serial number: 6218 Motor power supply: 220 / 260 / 380 / 450 V Current connection: 220 V Adjustable working height Stable cast iron construction Made in Italy Condition: Used machine, in good visual condition. Condition as shown in the pictures. Sold in the exact condition as presented in the photographs.

Condition: excellent (used), For sale: professional industrial pump ASTRA CM 50-125A, manufactured in Italy (Padova, Italy). The pump is in very good visual and technical condition. Robust construction designed for installations, water systems, and technological circuits. Three-phase motor 5.5 kW, 2800 rpm, 400 V power supply. The pump is equipped with threaded connections. The unit has been regularly serviced – inspection sticker by DPT is present. Very durable equipment – Italian production, heavy-duty cast iron construction. Technical data Cjdpfeyuqrfsx Afqsgw • Manufacturer: ASTRA (Padova, Italy) • Model: CM 50-125A • Type: three-phase electric pump • Motor power: 5.5 kW • Power supply: 230 / 400 V • Speed: 2800 rpm • Maximum capacity: 1200 l/min • Head: 25 m • Insulation class: F • Protection rating: IP55 Shipping or personal collection possible. The listed price is for 1 piece.

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Very easy to clean. Working width: 520 mm Cedjy Sfb Rjpfx Afqogw Power supply: 380 V Weight: 250 kg Made in Italy.

Condition: good (used), overall weight: 42,000 kg, total width: 2,800 mm, total length: 12,400 mm, total height: 5,100 mm, BOLDRINI RIBO 30HY/6000 – Flanging & Dishing Machine Manufacturer: BOLDRINI (Italy) Model: RIBO 30HY/6000 Type: Hydraulic Flanging & Dishing Machine Max. workpiece diameter: 6,000 mm Maximum plate thickness: 30 mm (cold forming) Year: 2002 Application: Dishing and flanging of tank heads, pressure vessel ends and dished ends. Cgodpezilu Aefx Afqsw Length:12400mm Width:2800mm Height:5100mm Weight:42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Cedpjzil Txjfx Afqogw Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Nirox multi-Thick-MS1-CH1 – Sensor for Multi-Layer Thickness Measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, designed for precise, non-contact measurement of multi-layer materials such as plastic films, composites, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industries. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate layer thickness measurement Measuring method: A-Scan / optical interference analysis Cgjdeziiw Uopfx Afqsw Channel: 1 (CH1) Fields of application: Inline measurement in production lines or for laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (see image) Sensor multi-Thick-MS1-CH1 Connection cable (Subject to changes and errors in technical data. All information is provided without guarantee!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 22675, type of input current: three-phase, input voltage: 400 V, disc diameter: 300 mm, rotational speed (max.): 3,600 rpm, rotational speed (min.): 600 rpm, overall weight: 410 kg, spindle diameter: 25 mm, wheel diameter: 300 mm, wheel width: 50 mm, Equipment: double-sided, rotational speed infinitely variable, ✨ 2016 Ciclope DBC 400/2-MV Double Ended Polishing Machine – For Sale in Ireland (Very Good Condition) Enhance your metal finishing capabilities with this high-quality Ciclope DBC 400/2-MV Double Ended Polishing Machine, manufactured in 2016 and currently available in very good condition. Built in Italy, Ciclope machines are trusted by professionals across the metal fabrication and surface finishing industries for their durability, precision, and powerful performance. This robust double-ended polishing system is ideal for stainless steel, aluminium, brass, and other metal components. Whether you're polishing flat parts, round tubes, or intricate shapes, the DBC 400/2-MV delivers consistent, high-speed results with minimal vibration and excellent control. ✅ Key Features – Ciclope DBC 400/2-MV (2016) Year of Manufacture: 2016 Condition: Very Good – Fully operational Type: Double-ended polishing machine Motor Power: 2 x 3 kW (per side) Polishing Wheel Diameter: 300 mm Cedpfxjwqrltj Afqogw Polishing Wheel Width: 50 mm Spindle Diameter: 25mm Spindle Length: 110mm Spindle Speeds: 600 to 3600rpm Spindle Speed: Variable (MV = motovariator model for adjustable speed) Electrical Connection: 3ph/400V/50Hz Machine Weight: 410kg Workpiece Compatibility: Flat and round components, small to medium size Construction: Heavy-duty cast iron base for stability Integrated Tool Rests and Safety Guards Brake: Electronic Brakes and Stop Pedals Electrical Controls: 24V CE certified, user-friendly panel 🧰 Machine Applications High-speed surface finishing of stainless steel and non-ferrous metals Pre-polishing, mirror polishing, or deburring Ideal for fabrication shops, decorative finishing, and precision engineering Dual-head configuration increases throughput and flexibility 📦 Included in Sale Ciclope DBC 400/2-MV polishing unit 2 x polishing spindles with guards Adjustable tool rests Control cabinet and safety system Ready for use in workshop or production line 📍 Available Now in Ireland Located in Ireland, this machine is in stock and available for immediate inspection and delivery. We provide nationwide shipping, with options for UK and European delivery upon request. 📞 Enquire Now Don’t miss this opportunity to own a premium Italian-made polishing machine in excellent working condition. Perfect for professionals who demand reliability and a high-quality finish. Ciclope DBC 400/2-MV for sale in Ireland Double ended polishing machine used Industrial metal polishing machine Ireland Surface finishing equipment for stainless steel Polishing machine with variable speed control Used Ciclope metal polishing machine Heavy-duty polishing grinder for aluminium and brass Mirror finish polishing machine Ireland / UK / Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2023, Overview Cgodpfsziuazjx Afqjw This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: used, Year of construction: 2005, Overview This SIDEL FILLING S.r.l. E-JET 40 is a rotary rinser for glass bottles, equipped with 40 rinsing valves (pitch 113 mm). It currently operates within a complete cider filling line and handles glass formats from 25 cl to 1.5 L. A separate water filtration system with manifold piping, pressure gauges and manual valves is included. The machine is enclosed in stainless steel framing with transparent safety guards and features rotary bottle handling with starwheel transfer. It is still installed and under power, remains in production until end of October 2026, and can be visited in operation on request. Technical data - Manufacturer: SIDEL FILLING S.r.l. (Parma, Italy) - Model: E-JET 40 - Year of manufacture: 2005 - Machine type: rotary bottle rinser, glass - Rinsing valves: 40 (pitch 113 mm) - Products: cider, carbonated beverages - Formats: 25 cl / 27.5 cl / 33 cl / 50 cl / 75 cl / 100 cl / 150 cl - Capacity: up to 18,000 bph (0.33 L), approx. 14,000 bph (0.75 - 1.0 L) - Dimensions: approx. 290 x 240 x H 230 cm - Weight: approx. 3,400 kg - Power: 6.5 kW installed (400 V, 50 Hz) - Air: 6 bar operating, approx. 100 Nl/min - Water: 3 bar, approx. 2,500 l/h Equipment - Water filtration system with manifold piping, gauges and manual valves - Spare parts package - OEM technical documentation and machine layout drawing Cgsdezidx Hjpfx Afqow Condition Used - in production, still installed and under power. Last major maintenance: April 2026. Availability From end of October 2026 (week 43). Location: France. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2020, OVERVIEW This Permeare ADA 600-1000 ion exchange resin unit, manufactured in 2020, is designed for the treatment of food-grade liquids, especially wine and must. The system can be used for tartaric stabilization of red and white wines and musts by means of ion exchange resin technology. The machine is a compact, skid-mounted treatment unit with four vertical resin columns, stainless steel pipework, a dosing pump system and an integrated electrical control cabinet. The system operates with two resin columns working alternately, allowing one column to be in production while another column is regenerated. The process is controlled by PLC and monitored via a Siemens SIMATIC Touch Panel and a Mettler Toledo M200 analytical controller. The unit is manufactured with metallic parts in AISI 316 stainless steel, while the plastic parts are specified as suitable for food industry use. The resin volume is listed as 120 litres. The maximum column flow is indicated as approx. 40 hl/h. The machine is supplied with documentation including instruction manual, P&ID process diagram and electrical schematics.   Cgodpfx Aszh T R Ajfqow TECHNICAL DATA - Manufacturer: Permeare S.r.l. - Manufacturer Location: Milan, Italy - Machine Type: Ion exchange resin unit / softening unit - Type / Model: ADA 600-1000 - Year of Manufacture: 2020 - Application: Ion exchange treatment / tartaric stabilization of wine and must - Process Principle: Ion exchange resin treatment with alternating resin columns - Resin Volume: 120 l - Resin Type: Type A - Resin Supply Form: OH- - Maximum Column Flow: approx. 40 hl/h - Flow Rate per Column: 4–10 BV/h - Dosing Pump: Chemical / regenerant dosing pump installed on skid - Maximum Operating Pressure, Process Side: 10 bar at 38°C - Maximum Design Operating Pressure: 10 bar - Maximum Liquid Inlet Pressure: 5 bar - Operating Temperature Range: 0 – 40°C - Storage Temperature Range: +5 – +50°C - Material, Metallic Parts: Stainless steel AISI 316 - Material, Plastic Parts: Suitable for food industry use - Skid Construction: Open stainless steel frame structure - Power Supply: 230 VAC - Frequency: 50 Hz - Nominal Power: 1 kW - Nominal Current: 4.2 A - Control System: PLC-controlled unit - Operator Panel: Siemens SIMATIC Panel Touch - Analytical Controller: Mettler Toledo M200 - Condition: Used, installed / as complete skid-mounted industrial process unit

Condition: used, Year of construction: 2008, Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data:  - manufacturer: ENOS, Italy - model: Eticap - year of manufacture: 2008 - labelling Heads: 2 (wet-glue heads) - Head 1: front and neck labels - Head 2: back labels Codpfjy Scb Iex Afqsgw - operation Direction: Left to right - production Capacity: 4.000/h - adjusted for: cylindrical glass bottles - 0,7 L = Ø75mm - 1,0 L = Ø86mm - condition: Stored off-line since 2020, machine in a good condition - actual label sizes:  - front label: 131mm height, 77mm width - back label: 114mm height, 66mm width