Squaring/Edgebanding Lines

BIESSE - RBO STREAM SB

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Bedpfx Afewuz Rtjnewh Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 undefinedPosition 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available immediately!!! Specially designed recovery boom with lifting fork for recovery and towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Fully hydraulic system. 3rd coat HDRV paint (STANDARD) Toolboxes (internal): yellow RAL 1032 Toolboxes (external): yellow RAL 1032 Lifting fork: black, U-TEXT RAL 9005 Recovery boom: black, U-TEXT RAL 9005 Rear stabilizers: black, U-TEXT RAL 9005 Bwsdpfxepl Avdo Afnoh Counterweight (front, under cab, if applicable): black, U-TEXT RAL 9005, smooth front chassis (STANDARD) - Hot-dip galvanized - For installation of front counterweight - Rear part painted in superstructure color (STANDARD) - Lifting angle 40° (Illustration HDRV 1013) - Mounting plates for main and auxiliary winches - Shackles 2x15000kg - Left and right side on the rear part of the arm - Space for spare wheel holder on recovery boom. 6. Lifting fork (STANDARD) - Position range relative to horizontal axis: -5° / +10° - Load capacity retracted: 20,000 kg - Load capacity extended: 10,000 kg - Extension: 3,800 mm - Range up to hydraulic rear stabilizers (STANDARD) - Independently controlled - Maximum width: 3,000 mm - Rotating stabilizers for asphalt work and hydraulically extendable beam, No HDRV 1013 Single extension: 0 - 3,000 mm Maximum payload: 2,000 kg – tank storage behind cab - Relocation of air tank behind cab - Relocation of battery behind cab - Relocation of AdBlue tank - Counterweight behind cab on front frame (weight 100 kg) - COME UP Bison 50 main winch, mounted on recovery boom, pulling force 22, - COME UP Bison 50 auxiliary winch, mounted on recovery boom, pulling force 22, - Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on right side (STANDARD) - Right side, rear quick couplings for brake system supply, transferred from chassis - Quick-release connector with 20-meter cable - Air pressure roller, on left side of superstructure, - Over rear axles electrical trailer socket + trailer coupling, from chassis - Jump-start aid 12V/24V, cable, lever, right side mounted - Jump-start aid 12V/24V, cable, lever, left side mounted - Camera + LCD monitor in cab - Camera for winches + LCD monitor in control box MONITOR: - Vibration resistance: 10G - Shock resistance: 100G - Operating temperature: -30 to +70°C - CE marking - EMC approval: includes emergency stop switch - Radio remote control – 1 function - Made from aluminum - Holders for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in toolbox opening – doors - Guard rail on toolboxes – stainless steel - Aluminum platform, perforated, mounted on top of toolboxes - Stainless steel holders in large toolbox behind cab for forks, hooks, open - Toolbox edges with stainless steel profiles - Lighting package compliant with road traffic regulations - LED lighting in toolboxes - LED external lighting - GAMET DE LUX LED warning lightbar, 1,800 mm - Mounting of warning lightbar on upper part of superstructure - ORANGE BLITZ warning light, 2 pieces – front mounted - ORANGE BLITZ warning light, 2 pieces – rear mounted - ORANGE BLITZ warning light, 2 pieces – mounted at edge of last toolbox door - Switches for all auxiliary lights

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" W05024K) Brush-cleaning machine "WANDRES" Bwedpotr Envefx Afneh W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 3000, with automatic handling. Composed of the following machines: X03001A) Double Loader "RBO" Mod. Winner C 3200 with central motorised roller conveyor X03001B) 1st Double-side Sizing & Edge Banding "BIESSE" Mod. Stream SB 1 - 7.5 Bwedpfsi Rbg Tex Afnsh X03001C) Turning station (90°) lengthwise to crosswise "RBO" Mod. GPK 1 X03001D) 2nd Double-side Sizing & Edge Banding "BIESSE" Mod. Stream SB 2 - 11 X03001E) Turning station (90°) crosswise to lengthwise "RBO" Mod. GPK 2 X03001F) Double Stacker "RBO" Mod. Winner S 3200 with central motorised roller conveyor

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Bwjdpjw T Sd Tofx Afnoh Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: excellent (used), LINE (half line) of Double-side Sizing-Milling & Edge Banding, with automatic handling system. Composed of the following machines: A) LOADER (Portal) with double station "RBO" Mod. Advantage C 3200 and central motorized rollers table. B) Infeeding Rollerway, with double-cone TURNING Device "RBO" Mod. GPK-1 C) Double-side SIZING and EDGE BANDING machine "BIESSE" Mod. Stream SB2 11.0 D) UPSIDE DOWN 180° TURNING MACHINE "RBO" Mod. Ribaltatore Bedpfxehvah No Afnjwh E) Outfeeding Rollerway, with double-cone TURNING Device "RBO" Mod. GPK-2 F) STACKER (Portal) with double station "RBO" Mod. Advantage SC 3200, with central motorized rollers table.

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 Bwjdpfx Afettgy Honjh E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: excellent (used), Year of construction: 2002, 5-Axis Machining Center - Universal DECKEL MAHO DMU 70 EVO Year of manufacture: 2002 Control: MillPlus iT Heidenhain Machine hours: 33,289.6 h Spindle hours: 10,533.5 h Technical Data: X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm Bsdpfx Afsxf Hlhenjwh Main Spindle: Speed range - main spindle: 20 - 18,000 rpm Drive power - main spindle: 35 / 25 kW Max. torque: 130 / 87 Nm NC Rotary Swivel Table: Clamping surface: 700 x 500 mm Swivel range, B-axis: 180° Rotatable, C-axis: 360° Max. table load: 350 kg Centering bore: 30 H6 mm T-slots: 7x 14H7 x 63 mm Table speed range: 21.5 rpm Tool Magazine: Number of tool positions: 32 Max. tool length: 315 mm Max. tool diameter: 105 mm Max. tool diameter with adjacent pockets empty: 130 mm Max. tool weight: 6 kg

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, center height: 175 mm, type of input current: three-phase, spindle speed (max.): 1,500 rpm, spindle speed (min.): 1 rpm, feed length X-axis: 285 mm, feed length Z-axis: 800 mm, overall weight: 4,000 kg, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, input voltage: 400 V, CNC Cylindrical grinder STUDER S33 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC 21i-TB Software installed: StuderGrind Centre distance: 650 [mm] Height of centers: 175 Bwedpfexywhpox Afnsh Stroke X axis: 285 [mm] Min. Stroke speed X axis: 0.001 [mm/min] Max. Stroke speed X axis: 5000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 800 [mm] Min. Stroke speed Z axis: 0.001 [mm/min] Max. Stroke speed Z axis: 10000 [mm/min] Resolution Z axis: 0.0001 [mm] B axis swivelling stroke: -15 [°] / +195 [°] B axis indexing precision: Hirth 1 [°] Workpiece spindle nose: MT5 Workpiece spindle min. speed: 1 [rpm] Workpiece spindle max. speed: 1500 [rpm] Max. part weight in part holder headstock between centres: 80 [Kg] Type of attachment tailstock: MT3 Tailstock quill stroke: 35 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: +/- 40 [mm] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4000 [Kg] INCLUDED EQUIPMENT: x1 internal grinding spindle type 102560B – speed: 60,000 [rpm] x1 hydraulic swiveling dressing attachment x1 fixed dressing unit mounted on the table x1 rotating wheel dressing unit (electrical) x1 3-jaw chuck Ø170 [mm] - MT5 x1 4-jaw chuck Ø170 [mm] - MT5 x1 magnetic chuck Ø170 [mm] - MT5 x1 2-point steady rest x1 pneumatic tailstock lift x1 pneumatic upper-table lift x1 longitudinal slide with rotary table - swiveling up to 8.5 [°] x1 automatic B-axis turret wheelhead – Hirth gearing 1 [°] x1 C-axis for thread and form grinding x1 workpiece probe MOVOMATIC C25 x1 contact control device DITTEL SENSITRON 6 x1 semi-automatic wheel balancing device MPM type BMT100M x1 paper filtration unit ARO TECHNOLOGIES type 5491.246A01 x1 mist extraction unit AIR-FRESH SERVICE type FMN-V12 x1 foot pedal x1 electrical cabinet air conditioner x4 external grinding wheel flanges x1 set of lifting equipment x1 axis bracket (for transportation of the machine) x1 set of operating manuals (French, English, and German) More information upon request.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Numerically controlled machining centres WINLINE WINLINE is a modern and innovative machining centre dedicated to the production of wooden windows and doors components. WINLINE is performing the entire working cycles including the load /unload and the positioning of the parts for each needed operation, under the direct control of the NC. This new level of integrated automation can afford the highest level of precision. The machine is a real “one-man factory”: controlled by a single operator, performs the complete process on each component without the need of second passes, from squared planed all round parts to finished parts ready for assembly and painting process. It also gives the operator time to perform any further processing regarding the construction of a window: molding, sizing, assembly of the elements at the clamping machine, assembly of the hardware, assembly of the glass etc. WINLINE can produce any kind of window component, with any type of jointing (negative profile and dowels, mechanical fixing, open tenons, closed tenons...). The machine can perform the highest achievable level of productivity in each single case. Locking devices are engineered to ensure pieces stability and the highest level of precision, top constant quality surface in each operation and eliminates all kinds of marks and friction abrasions on finished parts, that in traditional systems may be caused by friction and sliding of the pieces on the handling device. WINLINE operating groups are engineered for heavy duty operations with high reliability. The machine can totally integrate with any cad/cam system allowing a direct transfer “from the project directly to the execution and production”. Bwedownx Agopfx Afneh The base machine includes: Mobile gantry structure and double Y axis with independent carriages Pieces manipulator: loading, unloading and clamp exchange Automatic lubrication system Multizone system Automatic movement of panel supports Belt conveyor for chips and off-cuts removal Numerical control Personal computer desktop with 3D video card and LCD Electrical equipment conditioned air Documentation Maintenance equipment Remote keyboard Industry 4.0 - Integration with factory systems