Used International for sale (8,526)

Condition: good (used), functionality: fully functional, grinding depth: 210 mm, center height: 510 mm, spindle speed (min.): 9,000 rpm, spindle speed (max.): 15,000 rpm, grinding length: 1,800 mm, rotational speed (max.): 15,000 rpm, rotational speed (min.): 9,000 rpm, Spindle Speed Min: 9.000 Rpm / Max: 15.000 Rpm Centre height Min: 230 mm / Max: 510 mm Spindle stroke 210 mm Horiz. Table size 700 x 1.000 mm Kledpfx Asyg Hdujnwou Table stroke 1.800 mm Featured with : - Feed on table - Feed on hor. Movement - Cooling unit - Safety doors

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Kedpfjtqlq Ejx Anwolu Tapping head Adjustable slip clutch Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Condition: used, Year of construction: 2002, honing diameter 200 mm stroke 600 mm 2 Honing spindles -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° -air gage measuring Klodpfx Anoy Umateweu made for honing liners with max diameter 120mm Machine is like new because it worked only few months.

Condition: used, Year of construction: 1973, min./max. hole to grind 8 / 10 mm max. grinding depth by internal grinding 150 mm swing dia. 450 mm workpiece spindle bore 35 mm max. swivability 30 ° min/max. table longitudinal travel 5 / 150 mm/min Kledpfx Ast Rlguenwsu Internal Grinding Machine | D14 - 1973 The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: D-14 | D 14

Condition: excellent (used), A well-maintained internal cylindrical grinding machine, manufactured by JUNG, type 221, with a surface grinding attachment. The largest bore that can be ground economically is 150 mm. Ksdpfx Anoy Svz Uswolu Grinding length without surface grinding: 250 mm. Grinding length with surface grinding, depending on the chuck length: ≤ 250 mm. Largest swing diameter inside the guard: 350 mm. Height of the spindle center above the table: 245 mm. Workpiece spindle bore: 44 mm. Workpiece spindle hollow taper: metric 50. Workpiece spindle speeds: 58 - 85 - 120 - 170 - 246 - 348 rpm. Table speed in rapid traverse (infinitely adjustable): 10 m/min. Table speed during grinding (infinitely adjustable): 0 - 8 m/min. Power requirement: 11 kW. Power requirement for the machine with surface grinding attachment: 12.5 kW. Net weight: approx. 3500 kg.

Condition: good (used), Year of construction: 1980, Info: The machine was installed in a pit! Kljdpfsy H Ia Sex Anwsu - Pulling force: max. 25,000 kg - Stroke height: max. 630 mm - Working speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total power requirement: 45 kW - Machine weight: 5,500 kg Transport and loading can be organised across Europe upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS & MORE. Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? For further information or contact options, you can reach us via the contact form.

Condition: good (used), Year of construction: 2004, - Traction force: max. 160 kN Klodpfey H Iaxox Anwsu - Broaching stroke: max. 1000 mm - Workpiece feeder stroke: max. 630 mm - Table width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg Transport and loading can be organized throughout Europe at an additional cost, upon request. Prices plus VAT Inspection is possible by appointment. Please contact us, our team looks forward to assisting you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality, yet affordable machine for your production? Or do you wish to sell yours? For further information or contact options, reach us via the contact form.

Condition: used, External/Internal Cylindrical Grinding JONES-SHIPMAN type 1310 Capacity: Ø 200 x 450 mm (8'' x 18'') Tilted table Grinding wheel: Ø 300 mm x thickness 25 mm x bore Ø 125 mm Drive wheel speed: 1750 and 2300 RPM Rotary grindstone holder support Supplied without internal grinding spindle Ksdpfxsy Nzhze Anwolu Equipped with 1 lubricant tank Voltage : 380 V Length: 1800 mm Depth: 1600 mm Total height: 1900 mm Weight: approx 2 T

Year of construction: 2026, condition: as good as new (ex-display), JT3150 Electronic Threading Machine easy operation via display directly on the motor, Blind hole depth programmable, Technical details: -Brushless motor 750 watts 220V -Multifunctional head -3-fold articulated arm system Klodpfx Ashpqadenwou -Tapping capacity in steel M3-M16 -Outreach up to 1900mm -Spindle GR2 Accessories: -Positioning magnet size 2 -quick change adapter size 2 -M3-M4-M5-M6-M8-M10-M12-M14-M16 -control on motor -drill chuck (1-13mm)

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm. Klodsxltzvopfx Anweu  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: used, Year of construction: 1986, External/Internal Cylindrical Grinding Machine JONES & SHIPMAN type 1307 3-jaws chuck Ø 200 mm Capacity: Ø 356 x 1016 mm (14'' x 40'') Year of construction: 1986 Rotating head Tilted table: 0 +16° / 0 -12° Grinding wheel dimensions: Ø 350 mm x thickness 30 mm Auto Feeds X / Z Speed variator on the parts carrier rotation (See other technical details on photo) Equipped with: 1 internal grinding spindle - 1 lubricant tank - 1 hydraulic group Voltage: 380 V Length with table ends: 3500 mm / without table ends: 2600 mm Depth: 1700 mm Kedpfxjy Ndkfj Anwslu Total height: 2000 mm Weight: approx 3 T

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, Manufacturer: WMW GLAUCHAU Type: SIP 400x500 Kodpfx Aney Rh D Sewolu Year of manufacture: 1974 Total power requirement: 12 kW Control: conventional Machine weight: 5,900 kg Dimensions (L x W x H): 4000 x 1780 x 2400 mm Swing diameter: yes Internal diameter: 800 mm Grinding depth: up to approx. 500 mm Table stroke: 800 mm Distance from workpiece spindle head Grinding diameter in workpiece guard Adjustment of internal grinding attachment Delivery time: short notice Price: on request Type of machine: Internal and face grinding machine 1 unit internal cylindrical grinding machine with face grinding attachment SIP 400 x 500 Special version with enlarged swing diameter and extended hydraulic cross slide Reconstructed and modernized at the Glauchau manufacturer plant 1. TECHNICAL DATA 1.1 Working Range Internal grinding, min./max.: 30/630 (800) mm External grinding, max.: 800 mm Workpiece diameter, max.: 800 mm In workpiece guard, max.: 800 mm Without workpiece guard, approx.: 850 mm Up to grinding spindle carrier, max.: 1225 mm On the table, max.: 545 mm 1.2 Workpiece Spindle Headstock Max. cross traverse: 650 mm Cross adjustment via geared motor and positioning device Swivel range, max.: 15° Workpiece spindle speeds (rpm): 16/22/32/45/63/90/125/180/250 Load capacity, max.: 1000 kg Spindle head (with bayonet flange) DIN 55021 size 11

Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately Model: 95 L IM Klsdjy E I Awjpfx Anwou Intensive mixing of various rubbers Rotor type: HP-5 Type Design Tank capacity: 95 liters Dosing opening size: 860mm x 407.7mm Dosage (Kg.): 95 x Sp. Gr. compound x filling factor The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90. A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor Rotor speed: 6 to 60 rpm Active cycle time: Continuous Discharge door: Hydraulically operated sluice door in the side of the chamber: Peripherally drilled Floating weight: Hydraulic operation The mixer: approx. 10t The main motor: approx. 5t The main gearbox: approx. 5t The main control panel: approx. 1.5t

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg Kjdst Dwb Djpfx Anwjlu clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: good (used), internal diameter 200 mm grinding depth 80 mm stroke of the table X= 300 mm stroke of the table Y= 500 mm control FANUC 18i-TA total power requirement 7 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,950x2,330x1,640 m O K A M O T O High-Precision Internal Cylindrical Grinding Machine with FANUC CNC Control, System 21 i – TA, 2-Axis Simultaneous Machining For machining bores, end faces, and outer diameters in a single setup TECHNICAL DATA Kodpfxoy Dvnre Anwolu Internal grinding diameter: (6) - 100 mm Grinding depth approx.: 80 mm Max. table stroke: X-axis 300 mm Z-axis 500 mm Swing diameter over table: 600 mm Swing diameter in chuck cover: 260 mm Table speed: (X/Z-axis) 0.1 - 10,000 mm/min Swivel angle of workpiece spindle: -5 to +15 degrees Smallest input increment: X-axis 0.0001 mm Z-axis 0.0001 mm Workpiece spindle speed: 100 - 850 rpm Grinding spindle speeds: Standard (infinitely variable) up to 10,000 rpm and 20,000 rpm

Condition: used, Year of construction: 2012, functionality: fully functional, Tool holder: MK 2 Drilling capacity in steel: 23 mm Table: 380 x 390 mm Speeds: 150 - 1350 rpm Throat: 220 mm with Klodpfoy Rmwkjx Anwju lead screws and nuts

Condition: used, DVS UGRIND 800 is a CNC external and internal grinder, engineered for precision, high accuracy and reliability. Handles workpieces Ø 130–500 mm; Z axis 1200 mm, X axis 250 mm. Grinding spindle 25 kW; workpiece spindle motor 24 kW; speeds 0–500 t/min stepless; supply 50 Hz 3x 400 V; weight ~7000 kg; L2850×W2490×H2290 mm; operating time 12000 Heures. Accessories: coolant system, coolant filter system, measuring feeler gauge, set of flanges for internal grinding, set of flanges, lamp, tool cabinet, electronic handwheel. Capable of achieving tight tolerances; typical applications: automotive, machine tools, aerospace, medical, watchmaking. Kljdpeyxnuasfx Anwsu

Condition: good (used), For sale: Conveyor Drying Tunnel for Screen Printing: Klodpfx Aey Au Ubjnweu Manufacturer: M&R (The M&R Companies) Model: Sprint International Power supply: 400–415 V, 3-phase Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. All components are complete.

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX PrimeLink B9125 with A4 High Capacity Feeder with 2 Trays, Interface Decurling Module & High Capacity Stacker with 1 Cart for sale. Counter: ONLY 2.819.178 prints total This machine was fully and professionally checked in the seller's workshop and is in excellent condition with perfect print image quality. Kledpfxjy Sv A So Anwou Please contact us with questions! We will be happy to help you!

Year of construction: 1972, condition: ready for operation (used), A Voumard internal cylindrical grinding machine completely overhauled in 2020 is available. Grinding diameter range: 5mm-200mm, grinding depth: 250mm, speed: 1000rpm, speed control: continuously variable. An on-site inspection is possible. Klodpfxoy E S Hme Anweu

Year of construction: 1972, condition: used, max. tractive force: 10 to, max. stroke: 1250 mm max. cutting speed: 10 m/min. Kljdpfx Aecdtnhenwsu max. return speed: 25 m/min. clearing: 3 pieces passage width: 470 mm spacing of the raumstellen: 125 mm table: 400 x 400 mm special equipment: Discharge of spares by permanent magnetic spares conveyor 1 hydraulics, 1 working platform, el. hydr. shaft and end piece holder fixing, automatic loading device

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 3520.17.137, Tripet TST201CNC No. 3520.17.137, Year of Manufacture: 1987 Kodpfxowffmme Anwjlu Power: 76 kW

Condition: used, Year of construction: 1952, 220 mm Kodpfoyn R Nwex Anwjlu ja weight of the machine ca. 1,4 t

Condition: used, functionality: fully functional, Year of construction: 2025, Weber Internal Vibrator IVUR 50 — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 950 plus VAT | EXW Einbeck | Delivery upon request Kedoy A Hcqspfx Anwjlu

Year of construction: 1980, condition: used, max. tractive force: 10 to max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm turning: 3 pieces weight: 4,8 to automatic tool feeder hydraulic drawing head and end piece holder locking device Ksdpjcdtplofx Anwelu automatic loading device for workpiece diameter up to 100mm magnetic belt conveyor