Used International for sale (9,616)

Condition: used, mileage: 61,485 km, power: 85 kW (115.57 HP), first registration: 05/2023, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 97523A The vehicle is located at our site in 59929 Brilon, Möhnestraße 54. Exterior * Drive type: Front-wheel drive * Exterior mirrors, electrically adjustable and heated, both sides * 6-speed transmission * Rear wing doors without glazing (opening angle 180 degrees) * Body/superstructure: Box van * Increased payload * Wheel hub covers * Wheelbase 2716 mm * Spare wheel with road tires * Headlights H4 * Sliding door, cargo/passenger compartment, right side * Steel rims 6x15 Interior * Power windows, front Bsdpfx Afe Ah Aa Romsww * Wooden floor in the cargo area * Cargo area without windows * Cargo area partition * Front center armrest with compartment * Front left seat, height adjustable * Interior trim in the cargo/passenger compartment: Plywood Multimedia * MB audio system with DAB * Infotainment system: Mercedes me connect * Instrument cluster with matrix display * Communication module (LTE) preparation for Mercedes me connect * Mercedes-Benz emergency call system * Digital radio reception preparation * Preparation for digital radio * Preparation for Remote Service Plus Comfort and Environment * Driver assistance system: Attention Assist (fatigue detection sensor) * Driver assistance system: Hill-start assist * Lockable glove compartment * Steering column (steering wheel) mechanically adjustable * Light and rain sensor * Diesel particulate filter * Low emissions according to emissions standard Euro 6d * Start-stop system * Heat-insulating glazing * Central locking Safety * Airbag driver/passenger side * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Electronic stability program (ESP) * Side airbags (sidebags) and window airbags, front * Warning system for seat belts, driver/passenger side Other * Fuel filter with water separator * Engine 1.5 L - 85 kW CDI CAT Other: This offer is non-binding. Errors and prior sale are subject to change. If a foreign currency is specified, it will be converted at the current daily exchange rate. The currency of the vehicle location is valid. ----

Condition: used, mileage: 63 km, power: 81 kW (110.13 HP), first registration: 01/2026, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4543.CHO24.PU66035 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT - Airbag (passenger side) - Package: Technology Package 5, exterior mirrors with blinker, electrically adjustable, heated and foldable, audio system, 13-inch multifunctional display, Ford SYNC 4 incl. navigation, blind spot assist incl. CTA, rear parking brake assist, Pre-Collision Assist, camera- and radar-based, driver alertness monitor, wrong-way driver warning, lane keeping assist incl. lane departure warning and lane change assist, traffic sign recognition, park pilot front/rear, cruise control, adaptive, intelligent speed limiter, rear view camera, steering wheel, Sensico in leather look, electric safety and ESP - Radio: Ford audio system with 13-inch multifunctional display and Ford SYNC 4 incl. navigation - digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 13-inch TFT multifunctional display - integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa built-in voice assistant FURTHER EQUIPMENT - 2-stage unlocking for passenger compartment - 6-speed transmission - ABS electronic with EBD - Airbag, driver side - Exterior mirrors, electrically adjustable - Exterior mirror housing, plastic, black - Battery: H7 AGM single battery - On-board computer - Roof, flat - Roof console - Double-wing rear door/180° (without window) - Rev counter - Third brake light - Electronic safety and stability - Window lifter, electric, front - Parking brake, electronic - FordPass Connect - Windshield, heated - Floor mats: rubber floor mats, front - Grab handle, driver and passenger side - Glove compartment with lockable lid - Interior lighting, front - Automatic climate control, front Bwjdpfx Aj Ah Aktjfmew - Headrests (3) - Fuel tank 55 l - Load compartment lighting (LED) - Steering wheel: steering wheel, plastic - Center console, small - Emergency assist - Package: Technology Package 2 (Trend) - Ford audio system with 13-inch multifunctional display and Ford SYNC 4 - Pre-Collision Assist, camera-based - driver alertness monitor - traffic sign recognition system - wrong-way driver warning - lane keeping assist incl. lane departure warning - park pilot system front and rear - cruise control - intelligent speed limiter with speed limit display - rear view camera - Particle filter: diesel particulate filter - Radio accessories: 4 loudspeakers - Wheel covers - Tire repair kit - Tire pressure monitoring system - Wheels: steel 6.5 J x 16 m. 215/65 R16 R - Windscreen wipers with rain sensor - Headlamps with LED low beam - Sliding door: sliding door, right - Mud flaps, rear - Mud flaps, front - Power steering - Seat belts - Seats: seat package 6A - Start-stop system - Start function Ford Power - Bumper, front and rear, partially in vehicle color - Partition (metal) without window - Door handles, plastic, black-grey - Door hinges, 90 degrees - Recirculation heating - Lashing eyes 6 - Immobilizer - Heat protection glazing, slightly tinted - Central locking with remote control ... and more ---- 1st hand. German version. Errors and prior sale excepted. 2 years factory warranty from registration (extendable on request). We will gladly accept your vehicle in part exchange. Financing/leasing possible even without a down payment! Do you have any further questions? We would be happy to advise you! Although despite existing controls, a deviation of the vehicle from the above description cannot be ruled ou

Condition: used, mileage: 105,161 km, power: 96 kW (130.52 HP), first registration: 01/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1132. 2H39824 ----EQUIPMENT - Loading crane - Air conditioning - manual with pollen filter including outside temperature display - Radio: 5" Bluetooth touchscreen Uconnect radio with CD + steering wheel multifunction buttons - Seats: Double passenger seat with folding table in the middle backrest - Transmission: 6-speed manual - ABS with EBD - Storage compartment in the roof - Airbag, driver - Exterior mirrors, adjustable - On-board computer - Rev counter - ESC including rollover prevention - ASR, hydraulic brake assist (HBA), hill start assist - Adaptive load control (LAC) - Electric windows - Central locking with remote control - Rear cross member, tail lights - Markings, rear - logo and model name Bwsdpfxoz Axdks Afmow - Front headrests (3), height-adjustable - Rear headrests (4), height-adjustable - Crankcase ventilation, heated - Paint: Solid color paint - Ladder rack - Steering wheel, height-adjustable - Mechanical brake assist (MBA) - Emergency brake assist and lane keeping assist - Particle filter: Diesel particulate filter - Upholstery: Fabric - Platform body - Sensor for oil level monitoring - Power steering - Seat belts, height-adjustable - Seat: Driver's seat adjustable in length, height and inclination - Seat: Passenger seat adjustable in length and inclination with center armrest and lumbar support - Daytime running lights - Immobilizer, electronic Fiat Code - Heat-insulating glazing ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, mileage: 621,495 km, first registration: 04/2018, fuel type: diesel, axle configuration: 6x4, wheelbase: 46,000 mm, fuel: diesel, fuel tank capacity: 550 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro1, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Air suspension - Air-suspended seats - Radio/multimedia system - Rotating beacon - Seat heating - Auxiliary heater - Toolbox - Windshield - Xenon lighting = Notes = Internal inquiry number: 6-110 Volvo FH540 6x4 Epsilon Q150Z Short Timber Body Vehicle is available immediately! Vehicle: Volvo FH540 6x4 Chassis height: HIGH (formerly STD); for exact height measurements, please refer to VBI/WIS (dependent on tire size). Globetrotter safety cab, FH Wheelbase: 4600 mm Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation Euro 6 compliant emissions Diesel engine 131, 551 HP/405 kW, 2652 Nm with exhaust brake pressure regulator (including engine control for I-Shift) I-Shift AT2612F, automated 12-speed transmission, max input torque: 2,600 Nm Body: Pavic short timber stanchion body with steel front wall 8x EXTE aluminum stakes Note regarding the loading crane: The crane's rack is defective and needs repair (slewing not possible!) Crane: Epsilon Q150Z 9.6 loading crane (Double extension), lifting moment 140 kNm 4 linear levers, 2 pedals Comfort package - Headlights ON/OFF - Engine START/STOP - Engine speed adjustment + - Horn - 1 additional free switch - Seat heating via weatherproof and removable cover - Electrical box with terminal strip mounted on the base frame - Special base frame with 4-point mounting incl. 2 additional brackets - Outrigger plates extended by 170 mm - Grapple saw controls via foot pedal Our sales team will be happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. Bwjdpfsy T Nb Dsx Afmjw = Further information = General information Application: Forestry Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Axle configuration Front axle: Steered; suspension: leaf spring Rear axle 1: Differential lock; suspension: air suspension Rear axle 2: Differential lock; suspension: air suspension Weights Kerb weight: 15,600 kg Payload: 10,400 kg Gross vehicle weight: 26,000 kg Functional Crane: Palfinger Epsilon Q150Z 9.6, mounted at the rear of the chassis

Condition: used, This listing is for the Semper Safehood 120 The unit is in full working condition and is ready for immediate uses Bwedpjyu T H Sofx Afmjw Dimensions 1200mm L x 710mm D x 1200mm Ht The Semper Safehood 120 is a robust and reliable safety cabinet engineered to provide a secure environment for handling hazardous chemicals, powders, and biological agents. Combining high-efficiency filtration with ergonomic design, the Safehood series is a staple for laboratories prioritizing operator safety without compromising on workflow efficiency. Key Features & Benefits: Advanced Containment: Specifically designed to capture and filter harmful vapors and aerosols, keeping the breathing zone of the operator clear and safe. Optimal Visibility: Features large transparent side panels and a clear front sash, ensuring the user has a full, unobstructed view of their delicate work. User-Centric Ergonomics: The spacious 120cm internal width provides ample room for equipment, while the low-noise operation reduces fatigue during extended use. Easy Maintenance: Built with smooth, chemically resistant surfaces that allow for rapid decontamination and easy cleaning between different applications. Reliable Monitoring: Includes built-in safety alarms and airflow monitoring to ensure the unit is always performing at peak protective levels.

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet + Formalin Vaporiser The unit is in full working condition and is ready for immediate use The CAS Biomat 2 (manufactured by Contained Air Solutions) is a high-performance Class 2 Microbiological Safety Cabinet designed to provide a sterile environment for both the user and the sample. It is ideally suited for laboratories working with biological agents up to Biosafety Level 3. Key Features & Functionality: Triple Protection: Utilises a sophisticated airflow system (inflow and downflow) to protect the operator from airborne hazards, ensure product sterility via HEPA-filtered laminar air, and safeguard the environment by filtering exhaust air. Certified Safety: Fully compliant with BS EN 12469:2000 standards, ensuring it meets rigorous European safety requirements for biological workstations. Advanced Filtration: Equipped with high-efficiency H14 HEPA filters to create an ISO Class 5 clean environment. Bwodpfsyvhn Iex Afmsw User-Friendly Control: Features an intuitive control panel for managing work area lighting, gas valves, and decontamination cycles. Integrated Decontamination: Includes built-in functionality for UV sterilisation and formalin fumigation, with some models featuring real-time status monitoring and VHP (Vaporised Hydrogen Peroxide) ports for thorough cleaning. Practical Design: Often includes internal electrical sockets for equipment like balances or stirrers, pipette holders, and energy-efficient LED lighting.

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Specifications: Power: 11 kW Bwsdpfx Aeyhd Imofmsw

Condition: excellent (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1615 mm Y-axis: 815 mm Z-axis: 725 mm Table load: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Footprint (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Bsdpfeyy Npnox Afmjww Accessories / Special features: • CNC control system FAGOR 8055 i/PLUS MS • Internal coolant supply through the spindle, 20 bar • 24-position tool changer • Hinged chip conveyor • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space volume: 15 m³, total length: 10,200 mm, total width: 2,500 mm, total height: 3,940 mm, suspension: air, tire size: 275/75R22,5, wheelbase: 7,020 mm, color: white, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = The Wattsnew E-Box concrete mixer is an electrically powered concrete mixer. The drive unit (E-Box) is installed in place of the diesel engine and powers the existing hydraulic pump as usual. Everything remains the same, except that the hydraulic pump is driven by an electric motor instead of an internal combustion engine. You can also easily convert your existing concrete mixer trailer to electric power by removing the diesel engine unit and installing the E-Box. Thanks to its intelligent software, the E-Box consumes little power and is extremely easy to operate. With just one button and one lever, you control the entire system. Charging is also very easy. After a day's work, simply connect the E-Box to a charging station or a standard power outlet, and the batteries will be fully charged in five hours. Bwsdpexv Ry Rofx Afmew The Wattsnew E-Box is completely emission-free. This means no air pollution from diesel emissions, so you can work in a clean and safe environment. Your neighbors will also appreciate that you are using an emission-free and quieter machine. The use of electric vehicles and machines in the construction industry increases the chances of winning contracts. Customers and governments are increasingly demanding emission-free machines. For more information: / = Further Information = General information Year of manufacture: 2024 Design year: 2024 Applications: Construction and road construction Usable material: Concrete License plate: OT-93-FF Axle configuration Tire size: 275/75R22.5 Suspension: Air suspension Rear axle 1: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Steerable; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 2: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 3: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Steerable; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Weights Unladen weight: 11,440 kg Payload: 31,560 kg GVWR: 43,000 kg Functional Brand of body: Stetter AM 15000 Number of chambers: 1 Water installation: Yes Water tank: 500 l Hoses: Yes Condition Overall condition: very good Technical condition: very good Optical condition: very good Financial information Price: On request = Company Information = You can find our complete range here: /

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, Head Pick up Station TUPC CNC Indexing Micro Head A-Axis 360.000 x 0,001 Gr C-Axis 360.000 x 0,001 Gr SELS Spindle extionsion L=500 mm Bwedpfx Aexpfkkofmew CTS Internal coolant system ATC Chain Tool changer 60 Positions Hydrostatic guideways Optional T Slotted floorplates 5600 x 1875 (2x) + 4000 x 1875 mm X-Axis: 16.000mm Y-Axis: 3.500mm Z-Axis: 1.500mm Power on spindle: 80kW Spindle speeds: 4000Rpm Spindle Taper: Sk59ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 24000mm Width: 6500mm Height: 6500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, New: No General condition: very good Technical condition: very good Visual appearance: very good Production country: CH Please contact Vink Machinery for more information Menzi Muck Cylinders Bodpfx Asx Aiy Njfmsww * Double-acting * Equipped with two non-return valves * Cylinder diameter: 60 mm * The cylinder eye is 50 mm internal * Retracted center-to-center distance: 700 mm * Extended center-to-center distance: 1070 mm * Price is per unit!

Condition: used, CITIZEN CINCOM R 04 VI is a CNC automatic lathe / Swiss-type lathe designed for high precision, accuracy and reliability. It features 6 axes and 2 spindles, max. turning diameter 4 mm, max. turning length 40 mm, internal spindle diameter 9 mm, max. threading diameter 3 M. Main specs: up to 20000 t/min, spindle power 0.5/0.75 kW; tool-holder count 3 with 15 stations; turning tools 5, drilling tools 4, transverse tools 2; tool shank 8 mm; counter-operation 4 tools. Voltage 50 Hz 3x400 V; machine weight ≈850 kg; dimensions L1485×W560×H1410 mm. Accessories: LNS TRYTON 107 Hybrid bar feeder, parts catcher, coolant system, lamp. Ensures tight tolerances; suited to watchmaking, medical, automotive, aerospace and precision components. Bwodpfx Afozv I D Hsmow

Condition: new, mileage: 50 km, power: 125 kW (169.95 HP), first registration: 04/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 23, total length: 7,400 mm, total height: 2,900 mm, Equipment: ABS, USB port, air conditioning, cruise control, retarder, trailer coupling, = Additional options and accessories = - Air conditioning (driver) - Air conditioning - Webasto heater Bedpfxszu R Tbs Afmeww = Further information = Damage: none = Company information = We are an international company based in Belgium, near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers an extensive parking area serving as a showroom. We always have numerous buses of all brands, capacities, models, and in every price range in stock. We can find the right coach, school bus, or city bus tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical errors reserved. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: used, mileage: 638,000 km, power: 355 kW (482.67 HP), first registration: 05/2023, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 11,000 mm, total width: 2,600 mm, total height: 4,000 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Information in English: DAF XG 480 FAR 6x2 50 cm³ Combination TRS Cooling 2x Tailgate 6,000 km Top Condition Structure: Refrigeration and freezer unit, Ebo Rhoon Tail lift: 2,000 kg Dhollandia under-run ramp Cooling: TRS Carrier Iceland, electric, temperatures from -30 to +30 Date of first registration: ? 2023 TÜV (technical inspection): Mileage: 6,000 km Engine power: 355 kW (483 hp) 13 liters Transmission: AS-Tronic Wheelbase: 670 cm (axle 1 to 3), 530 cm (axle 1 to axle 2) Loading area dimensions (L x W x H): 815 x 250 x 275 cm (internal) Truck dimensions (L x W x H): 1110 x 260 x 400 cm (external) Unladen weight: 13,812 kg Payload: 14,188 kg Permissible total weight: 28,000 kg Maximum load on the front axle: 9,000 kg GCW (Gross Combination Weight): 50,000 kg Emission standard: Euro 6 E Suspension: Front parabolic, rear air suspension Axle configuration: 6x2 (FAR) Front tires: 385/65 R22.5 L50% R50% Continental Tires, Axle 2: 295/80 R22.5 L80% R80% Continental Tires, Axle 3: 385/65 R22.5 L40% R40% Continental Cab type: XG Extras: MX engine brake, auxiliary drive, air conditioning with climate control, auxiliary air conditioning, auxiliary heater, 9-ton front axle, refrigerator, luxury radio, 2 air-suspended seats, 2 beds, 2 x 600-liter tanks, 130-liter AdBlue tank, lift axle (not a steering axle), predictive cruise control, B3 alarm system, wheelbase 530 mm (axle 1 to axle 2), rear overhang 2.90 m, 360° camera, 45° cooling, fully insulated body by Ebo Rhoon, 5 rails on ceiling and floor, 1 horizontal load securing rail, stainless steel bumper on the body, LED lighting in the body, TRS Iceland cooling with EcoDrive and start-stop function, 2,000 kg Dhollandia sliding tailgate, pneumatic drawbar coupling, light and air connections, immediately available and ready for use, complete maintenance history, etc. Can be delivered in combination with the following products: DRACO TIPKAR EBO RHOON BOX TRS COOLING RAMP 24 CC Structure: Refrigerated/freezer unit Martini EBO Rhoon Manufacturer and type of chassis: Draco MZS 218 Cooling: TRS Carrier Iceland including EcoDrive and start-stop system Date of first registration: 09 ? 2023 TÜV: - Dimensions (L x W x H): 760 x 250 x 290 cm (internal) Adjustable drawbar length: 40 cm Unladen weight: 6,930 kg Payload: 11,070 kg Permissible total weight: 18,000 kg Suspension: Air suspension Axle types: SAF axles with disc brakes Tail lift: Dhollandia 2,000 kg under-run ramp Tire size: 445/45 R19.5 Axle 1: L30% R30% Axle 2: L30% R30% Spare wheel for tipping trailer: 40 % Additional equipment: Length-adjustable drawbar (40 cm), Dhollandia 2-ton tailgate, ABS, EBS, SAF axles with disc brakes, chassis with mounting plate, wheel chocks, complete insulation EBO Rhoon, 5 stainless steel rails in floor and ceiling, 1 horizontal lashing rail in the side walls, TRS Iceland cooling with EcoDrive and start-stop system, temperatures from -30 °C to +30 °C (operation with 380 V or via the cooling of the tractor unit), attractive flat evaporator, various LED reversing lights, roadworthy, immediately available and ready for use, suitable for 24-CC, 14-block or 18-Euro pallets, etc. More information: * Maximum axle load | Second axle: 11,500 kg * Payload: 14,288 kg * Tail lift | Loading capacity: 2,000 kg * Tire size | Second axle: 295/80 R22.5 * Tire size | First axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 Bjdpfx Aozuitgofmoww * Tire tread depth inside left | Third axle

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazak, controller model: SmoothG, workpiece weight (max.): 1,200 kg, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, overall weight: 6,800 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 18 W, spindle nose: DIN 67871A, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We are pleased to offer this very well-maintained Mazak VCN 530C vertical machining centre with a Lehmann 500 Series 4th/5th axis, manufactured in 2017. The machine is equipped with the user-friendly Mazatrol SmoothG control system. This machine impresses with its high precision, reliability and productivity, and is ideally suited for single-part and batch production. Technical specifications: Table dimensions: 1300 x 550 mm Table load capacity: 1200 kg Number of pallets: 1 NC rotary table: Lehmann T1-510520LL X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 – 12,000 rpm Spindle mount: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: Bjdpsz Nd Tcefx Afmjww With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 2007, total width: 8,000 mm, total length: 10,200 mm, total height: 5,600 mm, Arm horizontal travel X 6200 mm Arm vertical travel Y 1925 mm   Surface grinding and polishing head Seam Weld grinding head Seam weld back Gouging Edge preparation   Dished ends Head cones Vessels Shells Pipes   KS 1200 head combi wheel and belt grinding smalles ID internal 1450 mm Power 18.5 kW Disc 650 mm with 8-20 mm thicknes Contact wheel 300 mm belt size 100 x 2800 mm   Head is swivable - 20 to + 30 Degrees Bodpez Rwruofx Afmoww Large tooling package with spare disc and wheels Very little used Length:10200mm Width:8000mm Height:5600mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 710 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 3,050 mm, total length: 10,145 mm, total width: 9,850 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,600 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 15 bar, spindle motor power: 30 W, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak FH 5800 with the Mazak Palletech system. This machine was manufactured in 2001 and is fitted with the Mazatrol Fusion 640M control system. It is a robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. The Mazak Palletech automation system enables more efficient and unmanned production. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 10 Table load capacity: 500 kg X-axis travel: 710 mm Y-axis travel: 610 mm Bwedpfjz Rmq Tox Afmsw Z-axis travel: 660 mm Table indexing: 360° in 1° increments Spindle mount: DIN 69871A/40 Spindle speed: 35 – 15,000 rpm Spindle motor: 30/22 kW Magazine capacity: 120 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 2019, Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 Injection Moulding Machine General Information Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Country of Origin: Germany CE Marked: Yes Availability: Immediately available Location: Belgium ----- Technical Specifications Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Control System: NC5 Plus / C-Dias Machine Weight: 67,600 kg Maximum Operating Pressure: 210 bar Power Supply: 3 × 400 V / 50 Hz Connected Load: 204 kVA Rated Current: 552 A ----- Operating Hours Bodpfx Afj Afbz Ujmoww PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Heating Hours: 29,982.7 hours ----- Description Well-maintained Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 all-electric high-performance injection moulding machine built in 2019. The EL-EXIS series is specifically designed for applications requiring exceptional productivity, fast cycle times, high precision and reduced energy consumption. It is particularly suitable for packaging applications, thin-wall products and technical mouldings. The machine is equipped with the advanced NC5 Plus / C-Dias control system and remains in very good operating condition. Inspection under power can be arranged by appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Availability: Immediately available Location: Belgium Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Machine Weight: 67,600 kg PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Maximum Operating Pressure: 210 bar

Condition: excellent (used), Year of construction: 2007, operating hours: 40,967 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 2,000 kg, total height: 3,500 mm, total length: 7,500 mm, total width: 5,600 mm, table width: 1,100 mm, table length: 1,100 mm, overall weight: 24,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 28 W, Year of construction: 2007 CNC controller: Heidenhain MillPlus IT FD Axes X-axis travel mm: 1250 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0º/190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Bsde Afdibopfx Afmsww Table dimensions mm: Ø1100 Max. workpiece weight kg: 2000 Table rotation speed rpm: 500 max. torque Nm: 5600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 28/19(40/100%DC) Spindle torque Nm: 727/492(40/100%DC) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 120 Chip-to-chip time s: 5 Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Mist collector 3D quickSET Machine running times Under power: 91090 Spindle Working: 40967 Basic machine dimensions / weight Length mm: 7500 Width mm: 5600 Height mm: 3500 Weight kg: 24000

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standing pressure: 8.5 bar g Bjdpfe Ad Iy Ijx Afmjww Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, mileage: 1,313,000 km, power: 375 kW (509.86 HP), first registration: 02/2018, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, total length: 10,600 mm, total width: 2,600 mm, loading space length: 8,100 mm, loading space width: 2,500 mm, loading space height: 2,660 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, VOLVO FH 500 I-PARK COOL TRS COOLING VAN BEURDEN BOX WITH TAIL LIFT, EXCELLENT CONDITION Box: Cool / Freeze / Flowers Frigo Van Beurden 28 Refrigeration: Carrier TRS Iceland, temperatures from -30 to +30 degrees Bwsdpfoz Ddunox Afmew Tail lift: Dhollandia 2,000 kg First registration: 02/28 TÜV (technical inspection): 11/2026 Mileage: 1,313,000 km Engine power: 375 kW (500 hp) Transmission: Automatic Box dimensions (L x W x H): 810 x 250 x 266 cm (internal) Truck dimensions (L x W x H): 1060 x 260 x 400 cm (external) Tare weight: 13,960 kg Payload capacity: 14,040 kg Permissible total weight: 28,000 kg GCW: 50,000 kg Color: Red and Beige Suspension: Leaf suspension at the front, air suspension on axles 2 and 3 Emissions class: Euro 6 C Axle configuration: 6x2 Tire Axle 1: 385/65 R22.5 L60% R60% Tire Axle 2: 315/70R22.5 L30% R30% Tire Axle 3: 385/65 R22.5 L40% R40% Extras: Automatic transmission, engine brake, auxiliary air conditioning, auxiliary heater, refrigeration system, 2 beds, radio/CD player, TRS Carrier Iceland refrigeration system, temperature control between -30 and +30 degrees Celsius, fully insulated body (year of construction 28), extremely robust and in perfect condition, 3x stainless steel cargo securing rails in the floor and ceiling (including 3 bars), 1x horizontal cargo securing rail, numerous additional lights, pneumatic Rockinger trailer coupling, lift axle, ABS, EBS, complete service history available, directly from the first owner, immediately available and ready for use. Can be delivered with the following trailer: 2-AXLE BURG TRAILER VAN BEURDEN INSULATED BOX TRAILER TRS ICELAND Box: Cooling / Freezing / Flowers Frigo Van Beurden Chassis manufacturer and type: BURG BPM 00-20 TCZXX Refrigeration: Carrier TRS Iceland First registration: TÜV: 11/2026 Internal dimensions (L x W x H): 712 x 250 x 285 cm Tare weight: 5,660 kg Payload capacity: 14,340 kg Permissible total weight: 20,000 kg Suspension: Air suspension Axles: BPW axles with drum brakes Tire size: 265/70 R19.5 Tire tread depth Axle 1: L30%, R30% Tire tread depth Axle 2: L30% R30% Extras: Carrier TRS Iceland refrigeration unit, ABS, EBS, BPW axles with drum brakes, spare wheel, fully insulated box body from Van Beurden, 3x stainless steel rails in the floor and ceiling, 1x horizontal cargo securing rail, additional spotlights, rear doors, rear bumper, complete service history available, immediately available and ready for use. Further information: * Payload: 18140 kg * Type | First Axle: Michelin R * Tire Size | First Axle: 385/65 R22.5 * Tire Tread Depth Inside Left | First Axle: 60% * Tire Tread Depth Inside Right | First Axle: 60% * Maximum Axle Load | First Axle: 9000 kg * Type | Second Axle: Michelin R * Type | Third Axle: Michelin R * Tire Size | Second Axle: 315/80 R22.5 * Tire Size | Third Axle: 385/65 R22.5 * Tire Tread Depth Outside Left | Second Axle: 26% * Tire Tread Depth Inside Left | Second Axle: 30% * Tire Tread Depth Inside Left | Third Axle: 40% * Tire Tread Depth Outside Right | Second Axle: 30% * Tire Tread Depth Inside Right | Second Axle: 30% * Tire Tread Depth Inside Right | Third Axle: 38% * Maximum Axle Load | Second Axle: 11500 kg * Maximum Axle Load | Third Axle: 7500 kg * Wheelbase: 677 cm * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 2000 kg * Price on request: Yes * Position | First Axle: Front * Brand | First Axle: Other * Brake Type | First Axle: Disc brakes * Suspension

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Bodpfx Ajz Ad Dcefmjww Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: used, mileage: 638,000 km, power: 355 kW (482.67 HP), first registration: 03/2023, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, total length: 11,100 mm, total width: 2,600 mm, total height: 4,000 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Information in English: DAF XG 480 FAR 6x2 50 CC COMBI TRS COOLING 2x FLAP DOORS CAMERAS? EXCELLENT CONDITION Body: Refrigerated/Freezer, Ebo Rhoon Tail lift: 2,000 kg Dhollandia tuck-under lift Cooling: TRS Carrier Iceland, Electric, temperatures from -30 to +30 Date of first registration: ? 2026 MOT: Mileage: 638,000 km Engine power: 355 kW (483 hp) 13-liter Transmission: AS-Tronic Wheelbase: 670 cm (axle 1 to 3). 530 cm (axle 1 to axle 2) Load box dimensions (lxbxh): 815 x 250 x 275 cm internal Truck dimensions (lxbxh): 1110 x 260 x 400 cm external Unladen weight: 13.9 kg Payload: 14,107 kg GVW: 28,000 kg Max. weight on front axle: 9,000 kg GCW: 50,000 kg Color: H3279 Emission standard: Euro 6 E Suspension: Front parabolic, rear air Axle configuration: 6x2 Front tires: 385/65 R22.5 L90% R90% Michelin Axle 2 tires: 295/80 R22.5 L70% R70% Michelin Axle 3 tires: 385/65 R22.5 L30% R30% Michelin Cab type: XG Extras: MX Engine Brake, Motor PTO, Air conditioning with climate control, Auxiliary air conditioning, Auxiliary heater, 9-ton front axle, Refrigerator, Luxury radio, 2x air-suspended seats, 2 beds, 2x 600-liter tanks, 130-liter AdBlue tank, Last axle is a lift axle (no steering axle), Predictive Cruise Control, Alarm B3, Wheelbase is 530 (axle 1 to axle 2), Rear overhang of 2.90 m, Wide-angle camera, Rear-view camera on the rear of the load box, Connection for camera on the trailer, 45-degree cooling, Fully insulated body built by Ebo Rhoon, 5x rails against the ceiling and in the floor, 1x horizontal load-lock rail, Stainless steel scuff plate in the box, LED lighting in the box, TRS Iceland cooling with EcoDrive and start-stop, 2,000 kg Dhollandia tuck-under tail lift, Pneumatic fifth-wheel coupling, Light and air connections, Available for immediate delivery and use, Truck has always had a maintenance contract with DAF dealer Blom Katwijk, Complete maintenance history available, etc. Can be delivered in combination with: DRACO TRAILER EBO RHOON BODY TRS COOLING TAIL LIFT 24 CC Body: Refrigerated/Freezer Martini EBO Rhoon Chassis make and model: Draco MZS 218 Cooling: TRS Carrier Iceland incl. EcoDrive and start-stop system Date of first registration: 11 - 2022 MOT: 11 - 2026 Dimensions (lxbxh): 760 x 250 x 290 cm internal Adjustable triangle length: 40 cm Unladen weight: 6,930 kg Payload: 11,070 kg GVW: 18,000 kg Suspension: Air suspension Axle types: SAF axles with disc brakes Tail lift: Dhollandia 2,000 kg tuck-under tail lift Tire size: 445/45 R19.5 Axle 1: L80% R80% Axle 2: L80% R80% Spare wheel for trailer: 100% Extras: Length-adjustable triangle (40 cm), Dhollandia 2-ton tail lift, ABS, EBS, SAF axles with disc brakes, Scooped chassis, Wheel chocks, Fully insulated Ebo Rhoon, 5x stainless steel rails in floor and ceiling, 1x Horizontal load securing rail in the side walls, TRS Iceland cooling with EcoDrive and start-stop system, temperatures from -30 to +30 (runs on 380V or on the engine's cooling system), Nice flat evaporator, Various LED reversing lights, Ferry-compatible, Available for immediate delivery and use, Suitable for 24 CC, 14 Block pallets Further information: * Maximum axle load | Second axle: 11,500 kg * Payload: 14,107 kg * Tail lift | Load capacity: 2,000 kg * Tire size | Second axle: 295/80 R22.5 Bwodpfxezr Dflo Afmow * Tire size | First axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inside left | Third axle: 40% * Tire tread depth inside right | Third axle: 40% * Wheelbase: 670 cm * Tire tre

Condition: used, TORNOS DECO 2000/13 is a CNC automatic lathe engineered for precision machining, high accuracy and dependable reliability. Key capacities: 10 axes; max workpiece length 180 mm; internal spindle diameter 13 mm; spindle speeds 100-12000 t/min; back spindle 100-8000 t/min. Main specs: 50 Hz 3x400 V supply; spindle motor 2.2 kW; total power 11 kVA; weight approx. 2550 kg; footprint L2000×W1260×H1950 mm. Equipment: bar feeder IEMCA GENIUS 226/32, chip conveyor, coolant system, oil mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Bwsdpfxez Dvzte Afmjw

Year of construction: 2022, operating hours: 80 h, condition: new, functionality: fully functional, Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Air pressure: 6 Bar Steam injection: 2 - 6 bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 operating hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 liters Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Cextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max. 10 bar Reservoir: 10 liters Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Maximum pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature control unit Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 liters Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Bjdpoz S Idkofx Afmjww Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 liters Output: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg