Used International 5100 for sale (8,919)

Condition: used, TECHNICA ZSM 5100 center grinder for long shafts max L = 1000 Centering bore diameter 3 - 60 mm, workpiece clamping range 4 - 220 mm, workpiece length 50 - 1000 mm, workpiece weight max. 120 kg, centering bore angle 60°, grinding head adjustement max. 160 mm, grinding spindle speed 10000 - 45000 rpm, dressing stroke of the grinding disc dressing unit max. 40 mm Machine under power in our warehouse Mimu Machine Tools Gussago BS Italy Iedpfx Aoy Tp Dxja Isic

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 Isdpsw Intaofx Aa Ioic --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, Used Bibby approximately 400 litre capacity 316 stainless steel vertical reactor. Unit bolted dished top and welded dished bottom heads. Approximately 750mm diameter x 950mm straight side. Internal rated 3.46 bar/full vacuum design pressure at 100 deg.c. External 316 stainless steel jacket rated 6.6 bar/full vacuum design pressure at 100 deg.c. Unit has top entry stainless steel agitator with Lightnin model LS25V drive. Unit is mounted on side support lugs. Specifications: Capacity: 105 gal Type of stainless: 316 Internal Pressure: 3.5 PSI Internal Temperature: 212°F Jacket Pressure: 95.8 PSI Diameter: 29.528" Iisdpjykn Rwjfx Aa Isc Straight Side: 37.402" Type Of Heads: bolted dished top, welded dished bottom Legs/Lugs: side support

Condition: used, Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 3kW 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Specifications: Capacity: 241 gal Type of stainless: 316L Internal Pressure: 6 PSI Internal Temperature: 180°F Jacket Pressure: 87 PSI Iodpfxoykn Rko Aa Isic Type Of Heads: Welded Dished Top and Bottom Legs/Lugs: Side Supports

Condition: used, Year of construction: 2014, Transnorm belt conveyor GF 5100-700-600 RA2105 Technical data: Conveyor length (NL): 5100 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): Frequency converter for stepless speed control Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Iijdpopbiwyefx Aa Iec Optionally available: Supports Side guide on one side and on both sides Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 62,000 km, first registration: 08/2023, fuel type: diesel, color: white, gearing type: mechanical,

Condition: used, Year of construction: 2009, grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm control Siemens Sinumerik 840 D internal grinding depth max. 800 mm External grinding length max. 600 mm turning speed range - stepless 1-795 U/min workpiece length max. 800 mm Workpiece spindle unit (U/B1/L adjustment): - Travel (U axis): 300 mm - Swivel angle (B1 axis): -0.5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Setup speed (tapping): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through bore 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (clamped in flight) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of internal grinding spindles (infinitely variable) Belt-driven grinding spindles: 7.5 kW - Mounting bore grinding block (diameter): 100 mm / 125 mm - Mounting length grinding block: 220 mm - Grinding diameter: max. 600 mm - Grinding depth: max. 800 mm Iiedpfswp S Tnjx Aa Ioc External and surface grinding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - Drive power of external grinding spindles: 7.5 kW - Mounting bore of grinding block: Ø 140 mm - Grinding diameter: max. 800 mm - Grinding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm Equipment/accessories: - Various grinding spindles - Various flanges/grinding wheel holders - Various clamping jaws - Coolant system - Oil mist filter - Cooler - Technical documentation

Condition: refurbished (used), functionality: fully functional, equipped with a FANUC 16-T CNC control system. Iedpey Txk Uefx Aa Ieic Technical data and accessories are provided in a separate PDF. The machine has been completely mechanically overhauled.

Condition: used, Year of construction: 1983, Technical details: internal diameter: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,8 x 2,5 m Iodpfxer R Elhs Aa Isic max. workpiece weight: 15 kg clamping dia. max.: 140 mm clamping length: 250 mm max. bore diameter to be ground: 0,8-90 mm min./max. hole to grind: 160 mm centre height: 90 mm workpiece spindle stepless: 112-1000 U/min

Condition: used, Thread cutting chuck BILZ Type DSPL 127 MK2 Thread size: M3 - M12 Mounting shank: MK 2 Length compensation: 30 mm Clamping range: Ø 2.5 - Ø 10 mm (tap shank diameter) - Chuck clamping for the tap shank and torque transmission on the square - Adjustable safety clutch for torque limitation - Length compensation +10 mm / -20 mm for precise pitch threading Maximum chuck diameter: Ø 58 mm Chuck length: 120 mm Total length with shank: 215 mm Net weight: 1.7 kg Very good condition Iisdpfxey E T Dao Aa Iec

Condition: used, Year of construction: 2002, honing diameter 200 mm stroke 600 mm 2 Honing spindles Iodpfoy Umatox Aa Isic -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° -air gage measuring made for honing liners with max diameter 120mm Machine is like new because it worked only few months.

Condition: good (used), functionality: fully functional, grinding depth: 210 mm, center height: 510 mm, spindle speed (min.): 9,000 rpm, spindle speed (max.): 15,000 rpm, grinding length: 1,800 mm, rotational speed (max.): 15,000 rpm, rotational speed (min.): 9,000 rpm, Spindle Speed Min: 9.000 Rpm / Max: 15.000 Rpm Centre height Min: 230 mm / Max: 510 mm Spindle stroke 210 mm Horiz. Table size 700 x 1.000 mm Iedpfx Aaoyg Hduj Ijic Table stroke 1.800 mm Featured with : - Feed on table - Feed on hor. Movement - Cooling unit - Safety doors

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Iodpfxetqlq Ej Aa Isic Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Condition: used, Year of construction: 1973, min./max. hole to grind 8 / 10 mm Iedpfx Ast Rlguoa Ieic max. grinding depth by internal grinding 150 mm swing dia. 450 mm workpiece spindle bore 35 mm max. swivability 30 ° min/max. table longitudinal travel 5 / 150 mm/min Internal Grinding Machine | D14 - 1973 The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: D-14 | D 14

Condition: excellent (used), A well-maintained internal cylindrical grinding machine, manufactured by JUNG, type 221, with a surface grinding attachment. The largest bore that can be ground economically is 150 mm. Isdpfx Ajy Svz Uea Ioic Grinding length without surface grinding: 250 mm. Grinding length with surface grinding, depending on the chuck length: ≤ 250 mm. Largest swing diameter inside the guard: 350 mm. Height of the spindle center above the table: 245 mm. Workpiece spindle bore: 44 mm. Workpiece spindle hollow taper: metric 50. Workpiece spindle speeds: 58 - 85 - 120 - 170 - 246 - 348 rpm. Table speed in rapid traverse (infinitely adjustable): 10 m/min. Table speed during grinding (infinitely adjustable): 0 - 8 m/min. Power requirement: 11 kW. Power requirement for the machine with surface grinding attachment: 12.5 kW. Net weight: approx. 3500 kg.

Condition: good (used), Centre bore 2- 50 mm Diameter of workpiece 8 - 125 mm Lenght of workpiece 50 - 1000 mm Grinding wheel speeds 13'000 - 45'000 rpm Iedpfx Aajrivlue Ioic Misc.accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 1980, Info: The machine was installed in a pit! - Pulling force: max. 25,000 kg - Stroke height: max. 630 mm - Working speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total power requirement: 45 kW - Machine weight: 5,500 kg Transport and loading can be organised across Europe upon request and for an additional charge. Iiodpfxsy H Ia So Aa Ioc Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS & MORE. Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? For further information or contact options, you can reach us via the contact form.

Condition: good (used), Year of construction: 2004, - Traction force: max. 160 kN - Broaching stroke: max. 1000 mm - Workpiece feeder stroke: max. 630 mm - Table width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg Transport and loading can be organized throughout Europe at an additional cost, upon request. Prices plus VAT Inspection is possible by appointment. Please contact us, our team looks forward to assisting you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality, yet affordable machine for your production? Or do you wish to sell yours? For further information or contact options, reach us via the contact form. Iedpsy H Iaxofx Aa Ioic

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Isdpox I N Rbjfx Aa Ioic Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: used, External/Internal Cylindrical Grinding JONES-SHIPMAN type 1310 Capacity: Ø 200 x 450 mm (8'' x 18'') Tilted table Grinding wheel: Ø 300 mm x thickness 25 mm x bore Ø 125 mm Drive wheel speed: 1750 and 2300 RPM Iiodpfxoy Nzhzo Aa Ioc Rotary grindstone holder support Supplied without internal grinding spindle Equipped with 1 lubricant tank Voltage : 380 V Length: 1800 mm Depth: 1600 mm Total height: 1900 mm Weight: approx 2 T

Year of construction: 2026, condition: as good as new (ex-display), JT3150 Electronic Threading Machine Iiedpjhpqadsfx Aa Isc easy operation via display directly on the motor, Blind hole depth programmable, Technical details: -Brushless motor 750 watts 220V -Multifunctional head -3-fold articulated arm system -Tapping capacity in steel M3-M16 -Outreach up to 1900mm -Spindle GR2 Accessories: -Positioning magnet size 2 -quick change adapter size 2 -M3-M4-M5-M6-M8-M10-M12-M14-M16 -control on motor -drill chuck (1-13mm)

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, Manufacturer: WMW GLAUCHAU Type: SIP 400x500 Year of manufacture: 1974 Ijdpfx Aasy Rh D So Ijic Total power requirement: 12 kW Control: conventional Machine weight: 5,900 kg Dimensions (L x W x H): 4000 x 1780 x 2400 mm Swing diameter: yes Internal diameter: 800 mm Grinding depth: up to approx. 500 mm Table stroke: 800 mm Distance from workpiece spindle head Grinding diameter in workpiece guard Adjustment of internal grinding attachment Delivery time: short notice Price: on request Type of machine: Internal and face grinding machine 1 unit internal cylindrical grinding machine with face grinding attachment SIP 400 x 500 Special version with enlarged swing diameter and extended hydraulic cross slide Reconstructed and modernized at the Glauchau manufacturer plant 1. TECHNICAL DATA 1.1 Working Range Internal grinding, min./max.: 30/630 (800) mm External grinding, max.: 800 mm Workpiece diameter, max.: 800 mm In workpiece guard, max.: 800 mm Without workpiece guard, approx.: 850 mm Up to grinding spindle carrier, max.: 1225 mm On the table, max.: 545 mm 1.2 Workpiece Spindle Headstock Max. cross traverse: 650 mm Cross adjustment via geared motor and positioning device Swivel range, max.: 15° Workpiece spindle speeds (rpm): 16/22/32/45/63/90/125/180/250 Load capacity, max.: 1000 kg Spindle head (with bayonet flange) DIN 55021 size 11

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads Ijdjxltzvopfx Aa Isic  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: used, Year of construction: 1986, External/Internal Cylindrical Grinding Machine JONES & SHIPMAN type 1307 3-jaws chuck Ø 200 mm Capacity: Ø 356 x 1016 mm (14'' x 40'') Year of construction: 1986 Rotating head Tilted table: 0 +16° / 0 -12° Grinding wheel dimensions: Ø 350 mm x thickness 30 mm Auto Feeds X / Z Speed variator on the parts carrier rotation (See other technical details on photo) Equipped with: 1 internal grinding spindle - 1 lubricant tank - 1 hydraulic group Voltage: 380 V Length with table ends: 3500 mm / without table ends: 2600 mm Depth: 1700 mm Total height: 2000 mm Weight: approx 3 T Isdsy Ndkfepfx Aa Ioic

Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately Model: 95 L IM Intensive mixing of various rubbers Rotor type: HP-5 Type Design Tank capacity: 95 liters Dosing opening size: 860mm x 407.7mm Dosage (Kg.): 95 x Sp. Gr. compound x filling factor The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90. A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor Rotor speed: 6 to 60 rpm Iedsy E I Awspfx Aa Ijic Active cycle time: Continuous Discharge door: Hydraulically operated sluice door in the side of the chamber: Peripherally drilled Floating weight: Hydraulic operation The mixer: approx. 10t The main motor: approx. 5t The main gearbox: approx. 5t The main control panel: approx. 1.5t