Used Ingersoll for sale (70)

Condition: used, Year of construction: 1994, Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC  The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. The machine utilizes a three-stage compression configuration, which progressively increases air pressure. Additionally, each stage features combined aluminum and cast iron diffusers, while a cooling system with intercoolers at each stage and a final aftercooler enhances operational efficiency. Moreover, onboard instrumentation includes temperature and pressure transducers, ensuring continuous performance monitoring. Lhodpfjxcwx Hsx Aa Eer Technical Data and Performance The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar operates with an absolute intake pressure of 99.3 kPa, whereas its discharge pressure reaches 8.23 bar absolute. It delivers an air supply capacity of 2190 m³/h, making it highly suitable for large-scale industrial applications. Its three-phase asynchronous squirrel cage motor runs within a voltage range of 380 to 415V, at 50 Hz, providing a nominal power of 680 kW and a rotational speed of 2970 RPM. Similarly, the motor features an IP23 protection rating and Class F insulation, allowing a maximum operating temperature of 100°C. Given these specifications, a star/delta starting configuration limits the number of starts to three when cold and two when hot per hour, thereby preventing excessive thermal and mechanical stress. Structure and Components A vertically split cast iron casing enhances the machine’s robustness, facilitating easy maintenance and quick access to internal components. In particular, the Bull-Gear, constructed from AGMA 12-grade helical steel, operates with oil-lubricated hydrodynamic sleeve bearings, ensuring reliability and longevity. Furthermore, the 17-4PH stainless steel impellers feature a semi-open design with backward-leaning blades to maximize aerodynamic efficiency. In the same way, aluminum and cast iron diffusers aid in pressure recovery and maintain operational stability. The lubrication system integrates an oil reservoir coated with epoxy for corrosion resistance. Additionally, a 0.75 kW pre/post lubrication pump, operating at 380/415V, maintains continuous oil circulation, protecting moving components.

Condition: used, functionality: unexamined, Various used high-pressure pumps for sale individually or as a package Ingersoll/KMT – Type SL-IV50 / SLV50 / SLV50Plus UHDE – Type HP19/45S Lsdjv I S Azepfx Aa Eehr FLOW – Type 12X For legal reasons, only available as a spare parts donor Viewing by appointment Price upon request

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Lodpfxjvwgmgs Aa Eehr Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: used, Year of construction: 1988, functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,000 mm, table width: 2,000 mm, table length: 7,000 mm, overall weight: 180,000 kg, year of last overhaul: 2016, Table 7020x1810 mm Note portal width 2250 mm Travel paths: X=7387 mm Y=3070 mm Z=Support up to max without tool 920 mm + W 1000 Control: Heidenhain ITNC 530 Simultaneous: In X,Y,Z yes. In A,B,C with 1° Hirth gearing Spindle type: SK50 / Gearbox spindle Lodpfjwx Nltex Aa Eshr Four attachment heads Internal spindle cooling: Yes Operating hours: 95475 h Spindle hours: 37984 h Modernization carried out: 2003 / Control and drives renewed

Condition: used, Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, OPS Ingersoll OPS 550 – HSC Milling Machine (Year of Manufacture 2007) with Tool Changer & Extraction System Manufacturer: OPS Ingersoll Funkenerosion GmbH Model: OPS 550 Year of Manufacture: 2007 Machine No.: 655029 Made in Germany Ljdpfxsw I Sm De Aa Eshr The OPS Ingersoll OPS 550 is a precise and powerful high-speed milling machine (HSC) designed to meet the highest demands in toolmaking, mold making, and precision component manufacturing. Featuring an integrated tool changer, a high-performance extraction system, and a user-friendly control unit, it provides optimal conditions for efficient and highly precise work. Equipment & Features Integrated tool changer with multiple tool positions Extraction system for clean operation OPS control unit with screen, keyboard, and emergency stop Precise HSC machining for fine contours and complex shapes Robust machine construction for lasting precision Technical Specifications Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 V DC Rated current: 63 A Power consumption: 55 A Year of manufacture: 2007 Errors, typographical mistakes and prior sale excepted.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK32 - Spindle power : 17 [kW] - Spindle speeds : 30-42000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 550/400/400 [mm] - Rapid traverses rates (X/Y/Z) : 30 [m/min] A ROTARY AXIS - Travel : 120 [°] (+/-) - Indexing precision : 0.0001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 32 TABLE - Table dimensions : 450 [mm] Lhedeuhbtkopfx Aa Eor - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1900X2580 [mm] - Machine height : 2260 [mm] - Machine weight : 7200 [kg] MACHINE HOURS - Number of hours under power : 12558 [h] - Number of working hours : 6602 [h] EQUIPMENT - CNC : INGERSOLL ANDRONIC - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - 3 colors status lamp - Micro-lubrification coolant - Spindle cooling unit - Tool probe : BLUM

Condition: used, Year of construction: 2015, operating hours: 36,250 h, Used Compressor Ingersoll Rand Centac C750 MX4 40 bar year 2015 Technical Description Lsdpovgvb Ssfx Aa Eshr The machine provides a reliable option in the industrial sector for applications requiring high pressures and airflow. Ingersoll Rand, a leading company in air compression, manufactured this model in the Centac series with a focus on performance and durability. Model Features The Centac C750 MX4, a 2015 model, offers high-pressure (HP High Pressure) compression with a design that prioritizes reliability and longevity. Operating at a rated pressure of 40 bar, it therefore meets the needs of complex industrial applications that demand consistent and high-performance compression. Furthermore, this compressor features a single compression stage, which maximizes efficiency and simplifies maintenance. As a result, its single-stage design reduces the number of components, which keeps management costs low. Power and Airflow This compressor delivers 600 kWh of power, thereby providing enough energy to support continuous compression processes with optimized energy use. It supplies an air flow rate of 3600 m³/h, effectively meeting industrial demands for high volumes of compressed air while maintaining consistent quality and pressure in the output. Consequently, this capability makes it especially suited for intensive production lines that require continuous, stable airflow. Safety and Current State The Compressor includes advanced safety systems that protect both the machine and operators. Notably, its safety devices automatically shut down the compressor in case of overload or overheating, which minimizes malfunction risks. Currently, this compressor remains in storage, ready for immediate installation and integration into industrial setups. Its storage condition, in fact, ensures that it has no signs of wear from use, preserving its full functionality. Dimensions and Weight The compressor’s significant dimensions—5000 mm in length, 2700 mm in width, and 2200 mm in height—require proper planning for installation. Moreover, weighing 11840 kg, it needs specific lifting equipment for safe transport and positioning onsite. By planning ahead, operators can thus ensure safe and efficient handling during setup. Electrical Specifications The machine runs on a 400-volt power supply with a frequency of 5 Hz, which is fully compatible with industrial electrical standards. These specifications provide stable and continuous operation, which, in turn, is crucial for applications requiring constant use. Conclusion  of the Used Compressor Ingersoll Rand Centac C750 MX4 40 bar year 2015 The Compressor serves as a robust technical solution for industrial facilities needing high performance and reliable compressed air systems.

Condition: excellent (used), Ingersoll Rand LSES315MP TC - 786711 B16 001 - 400V Lhedpfskw Uy Asx Aa Esr - 110kW - 2984 min-1

Condition: used, Year of construction: 2012, An OPS-Ingersoll die-sinking EDM machine is available. Travel X/Y/Z: 525mm/400mm/450mm, C-axis: 360°, table dimensions X/Y: 750mm/650mm, max. workpiece weight: 1000kg, container dimensions X/Y/Z: 770mm/670mm/440mm, generator power (Eagle Powertec): 60A, electrode changer: 20-fold, high-speed jump: 18m/min, fine finishing generator: PT60, weight: approx. 5000kg, control: Eagle Powertec PC/NC 3060. 5000kg, control: Eagle Powertec PC/NC 3060, including compressor recooling unit, CO2 fire extinguishing system and pressure rinsing. Documentation available. On-site inspection is possible. Lhedewtrc Dspfx Aa Ejr

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressure: 14 bar, ambient temperature (max.): 60 °C, Used air dryer Brand: Ingersoll Rand Model: D780IN-A Year of manufacture: 2015 Features: Capacity: 13,000 Ltrs./min. - 780 m3/h Overall dimensions: 850 m × 720 m × 1400 m Power supply: 400/3/50 Maximum pressure: 14 bar Max. ambient (air-cooled): 50 °C Maximum inlet temperature: 60 °C Lhodpfx Aerg Diwoa Ejr Refrigerant: R-134A

Condition: used, Year of construction: 2004, machine/vehicle number: 575259, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, For sale is a high-quality sinker EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideal for precise EDM operations in tool and mold making, and comes equipped with an extensive range of features. 🔍 General Information: Manufacturer: OPS Ingersoll Model: Gantry 800 Machine No.: 575259 Year of manufacture: 2004 Origin: Made in Germany Condition: Used, well-maintained, and fully operational ⚙️ Technical Specifications: Travel distances (X/Y/Z): 550 x 850 x 450 mm Worktable size: approx. 800 x 1000 mm Max. head load: 200 kg Max. clearance: 585 mm Max. traversing speed: 12,000 mm/min 💡 Equipment & Features: 30-position tool changer, EROWA Mitsubishi 64-bit CNC control (separate control panel) Lodpfx Aaew Ig A He Eshr Programming software: MultiProg Control technology: Multipulse PRO Chuck: ER-016841 Integrated CO₂ fire extinguishing system Cartridge filter unit Dielectric cooling system by Weinreich Industriekühlung Extensive accessories and connection cables available ⚡ Electrical Data (as per type plate): Supply: 400 V / 3~ / 50 Hz Control voltage: 24 V AC / DC Power consumption: 17 A Fusing: 25 A Wiring diagram no.: 107258 Errors, typos and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 575650, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, TECHNICAL DETAILS Design: Lift tank Internal dimensions (W x D x H): 800 x 1100 x 480 mm Dielectric height programmable/automatic: max. 450 mm WORKING HEAD On ram clamping system UPC/H8000/Dynafix: 150 kg Min. distance electrode clamping system to worktable: 135 mm Max. distance electrode clamping system to worktable: 585 mm INTEGRATED C-AXIS Adjustable rotation speed: 1 - 20 rpm Measuring resolution: 0.001 degrees Load capacity with manual electrode change: 50 kg Load capacity with automatic electrode change: 15 kg Holding torque/clamping force: 120 Nm Max. moment of inertia of electrode: 0.4 kgm² WORKTABLE Support surface (W x D): 760 x 1000 mm Lsdpfx Aasw T Thmj Eshr Load capacity: 2,000 kg TRAVEL PATHS X / Y / Z (inside work tank): 550 x 850 x 450 mm Y (for electrode change and loading position): 1180 mm CONTROL PC-NC dialog: 2 x 32 bit Drive type: digital AC servo motors Max. travel speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min MACHINE DETAILS Main voltage: 400 V / 50 Hz Control voltage: 24 VDC Maximum fuse: 32 A Power consumption: 19 kVA Machine weight: 6,400 kg Main dimensions (W x H x D) including generator: 2760 x 2730 x 2940 mm Footprint with generator: 9 m² Generator weight: 640 kg Operating hours: 3,221 h

Condition: excellent (used), Year of construction: 2009, 5-axis Machining center. X 700, Y 550, Z 450mm, HSK E50 36,000Rpm, ATC 56 Pos. Lodpfx Aowzvqbsa Eohr

Condition: excellent (used), Year of construction: 2014, volume flow: 12.88 m³/h, INGERSOLL RAND R 75 N Screw Compressor NIRVANA VSD Variable speed (inverter) Ljdpfx Aew Dm Dwja Ejhr Motor 75 kW Capacity 12.88 m³/min Pressure 10 bar Year of manufacture 2014 Compressor in full working order.

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Lhodpjrtrx Rsfx Aa Eer Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 750 mm, table length: 650 mm, TECHNICAL DETAILS Version: Lifting Tank Internal dimensions (W x D x H): 770 x 670 x 440 mm Programmable/automatic dielectric fluid height: max. 395 mm Work Table Support surface (W x D): 750 x 650 mm Load capacity: 1,000 kg Travel Paths X / Y / Z (within working tank): 525 x 400 x 450 mm Y (for electrode change and loading position): 675 mm Control System PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. traverse speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min Min. distance between electrode clamping system and work table: 135 mm Max. distance between electrode clamping system and work table: 585 mm C-Axis Adjustable rotation speed: 1-20 rpm Measuring resolution: 0.001 degrees Load capacity for manual electrode change: 50 kg Load capacity for automatic electrode change: 15 kg Holding torque/clamping: Yes Max. electrode moment of inertia: 0.4 kgm² MACHINE DETAILS Dimensions (W x H x D) with generator: 2600 x 2680 x 2290 mm Space requirement with generator: 7.3 m² Machine weight: 4,360 kg Generator weight: 640 kg Connected load: 16 kVA Ledsw T Tg Nspfx Aa Eehr Fuse protection: 32 A Supply voltage/frequency: 400 V / 50 Hz Operating hours: 2,001 h

Condition: excellent (used), Year of construction: 2014, INGERSOLL RAND R 75 N Screw Compressor NIRVANA VSD Variable speed (inverter) Motor 75 kW Capacity 12.88 m³/min Pressure 10 bar Year of manufacture 2014 Lsdpfx Aokyuyzja Eohr Compressor in full working order.

Condition: excellent (used), Year of construction: 2002, Screw compressor INGERSOLL RAND MH75 75kw motor Capacity 12.30m3/min 10 bar pressure Year of manufacture 2002 The compressor is fully operational. Lodpfx Ajk N Dtbja Eshr

Condition: excellent (used), Year of construction: 2014, volume flow: 0.24 m³/h, operating pressure: 10 bar, INGERSOLL RAND R 2.2 - 10 screw compressor on a 200 l pressure tank 2.2 kw engine Capacity 0.25 m3/min Pressure 10 bar Year of production: 2014 Lsdpferur N Asx Aa Ejhr Mileage 5547 hours THE COMPRESSOR IS FULLY FUNCTIONAL

Condition: excellent (used), Year of construction: 2020, INGERSOLL RAND refrigeration dryer Capacity 13 m3/min, year of manufacture 2010 Lhodpfsiuk D Dex Aa Eer The dehumidifier is fully functional. I HAVE MORE COMPRESSORS FOR SALE SCREW REFRIGERATION DRYERS AND EQUIPMENT WELDING.