Used Ingersoll Indexable Drill for sale (64)

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: Ingersoll OPS 550 Control: Andronic 2060 Year: 2008 SPECIFICATIONS Travel X-Axis: 550 mm Y-Axis: 400 mm Z-Axis: 400 mm Rapid motion: (X/Y/Z): 60 m/min. Lsdpfx Aoziy Dxsfkshk Panning head Max. revolution: 0 - 42.000 rpm Spindle power: 15 / 17 kW Tool: HSK 40 E Tool capacity: 32 Table size: 650 x 500 mm Max. Table Load: 500 kg Req. space (LxBxH): 2,58 x 1,9 x 2,26 m Machine weight: 7.200 kg Equipment Caliper Electronical handwheel Erowa Nullpunktspannsystem

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. 3R clamping system Lodpfox Htfyjx Afkjhk Year of manufacture: 2017. Inspection under power possible.

Condition: excellent (used), Year of construction: 2014, operating hours: 26,000 h, functionality: fully functional, overall weight: 1,603 kg, power: 55 kW (74.78 HP), 2014 Ingersoll Rand R55i Compressor Lhedjzrxhhjpfx Afksk 55kw screw compressor Full service history Approx 26k hours Very good condition

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Lhodpfx Ajrtrx Rofkjk Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 650 mm Travel distance Y-axis: 550 mm Travel distance Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle interface: HSK-E 40 Spindle speed: 42,000 rpm Spindle running time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. EUR 40,000 Tool magazine Number of tool slots: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Machine type: CNC machining center Manufacturer: OPS INGERSOLL Model: SPEED HAWK 650 Year of construction: 2016 Electrical connection data Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT Technical documentation Manual HSK-E 40 tool holders 3 pallets Ljdpjzquqcefx Afkjhk

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: July 2026 Excellent condition, very few operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld, multifunctional handheld operating device Manual eroding with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump: max. 18,000 mm/min Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode holder: min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck Lsdpfx Afszvctpekjhk CO2 fire extinguishing system Cooling unit

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK32 - Spindle power : 17 [kW] - Spindle speeds : 30-42000 [rpm] Lhjdouhbtkopfx Afkjk LINEAR AXES - Travels on X/Y/Z axes : 550/400/400 [mm] - Rapid traverses rates (X/Y/Z) : 30 [m/min] A ROTARY AXIS - Travel : 120 [°] (+/-) - Indexing precision : 0.0001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 32 TABLE - Table dimensions : 450 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1900X2580 [mm] - Machine height : 2260 [mm] - Machine weight : 7200 [kg] MACHINE HOURS - Number of hours under power : 12558 [h] - Number of working hours : 6602 [h] EQUIPMENT - CNC : INGERSOLL ANDRONIC - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - 3 colors status lamp - Micro-lubrification coolant - Spindle cooling unit - Tool probe : BLUM

Condition: excellent (used), Year of construction: 2011, operating hours: 1,703 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, tank capacity: 800 l, OPS INGERSOLL Gantry Eagle 800 year of manufacture: 2011 travel: x, y, z 550 x 850 x 450 mm control: Eagle Power Tec electrode changer: 20 pieces Lhjdpfjzgt Rmex Afkok 3D probe 3D probe on the table magnet: 400 x 200 mm C-axis EROWA clamping system fire extinguishing system remote control chiller includes approximately 600/700 liters of dielectric fluid includes drawer cabinet with contents documentation machine is powered on for inspection

Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,247 h, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 42,000 rpm, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 60 °, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between September 21st and October 1st! TECHNICAL DETAILS Travel range X-axis: 550 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Swivel angle A-axis: -120° to +60° Swivel angle C-axis: n x 360° Distance from HSK-E tool holder to table: 450 mm Clamping area: 650 x 800 mm Ledpfxezquprj Afkshk Pallet dimensions for 4th and 5th axes: approx. 300 x 300 mm Spindle Spindle mounting: HSK-E 40 Spindle speed: 0 to 42,000 rpm Spindle power S1: 15 kW Spindle power S6: 17 kW Axes and Accuracy Drive type: Digital AC servo motors, fully synchronized Travel speed: max. 30 m/min Acceleration: max. 15 m/s² Repeatability: 0.002 mm Digital display: 0.001 mm or 0.0001 mm, selectable Nominal speed in NC axis operation A-axis: 40 min⁻¹ Nominal speed in NC axis operation C-axis: 40 min⁻¹ Tool Changer Type: Pick-up disc magazine Magazine slots: 32 MACHINE DETAILS Machine operating time: 484 d 11 h 24 min 06 s Spindle operating time: 4,246 h 55 min 36 s Type: 5-axis CNC machining center Connected load: 38 kVA Input voltage: 400 V AC, 3-phase, 50 Hz Control voltage: 24 V DC Fuses: max. 63 A Overall length: 3,300 mm Overall width: 2,200 mm Overall height: 2,300 mm Machine weight: 7,400 kg EQUIPMENT - Technical documentation and manual - Three spare pallets - HSK-E-40 tool holders - Pallets with attached specific fixtures External reference: Demo - Lot 1

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Lhodpfx Aszqupxjfkjk Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: used, Year of construction: 2009, total height: 2,800 mm, total length: 3,500 mm, total width: 1,800 mm, Empty weight: 13.000 kg - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 675002 - Drive system: CNC - Number of axes [pcs]: 3 - X-axis travel [mm]: 650 - Y-axis travel [mm]: 1100 - Z-axis travel [mm]: 500 - C-axis rotation [°]: 360 Lhodpfx Afszry E Ijkjk - Options: Chip conveyor, Tool magazine, Probe - └ Tool magazine [pcs.]: 32 - Transport dimensions: 3500mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2005, Serial no. 571752, 4 machining axes, travel ranges X/Y/Z 2,050 x 1,050 x 1,000 mm, table size 2,400 x 1,500 mm, table load 10,000 kg, machine bed mounted in a pit, with T-slot clamping surface, electrode changing system type EW15 Linear, dielectric fluid system with cartridge filter system, Ingersoll control system type Multipulse 64, extinguishing system. Ljdezq Dl Aopfx Afkjhk

Condition: used, Year of construction: 2005, machining center Ljdpfx Aozv D U Iefkjhk Processing center OPS Ingersoll OPS 600 Year of manufacture: 2005

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system Cooling unit Ljdszkftbepfx Afkjhk

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 576308, workpiece weight (max.): 7,500 kg, total height: 3,360 mm, total width: 2,150 mm, total length: 3,600 mm, table length: 1,640 mm, table height: 1,140 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 1,510 mm, feed length Z-axis: 650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, overall weight: 12,640 kg, Equipment: documentation/manual, CNC SINKER EDM MACHINE – OPS-INGERSOLL GANTRY EAGLE 1200 For sale: a large-format, premium-class CNC sinker EDM machine – OPS-Ingersoll Gantry Eagle 1200. Manufactured in Germany, its gantry structure (Mobile Portal) provides the highest geometric stability and micron-level precision when machining heavy molds and dies. MACHINE SPECIFICATIONS • Manufacturer: OPS-Ingersoll Funkenerosion GmbH (Germany) • Model: Gantry Eagle 1200 • Serial number: 576308 • Year of manufacture: 2009 • Conformity mark: CE GEOMETRIC PARAMETERS AND KINEMATICS (Axes) Full 4-axis system, digital AC servo drives: Lhjdpfezum Ubex Afkek • X-axis travel (head): 1000 mm • Y-axis travel (portal): 1510 mm (loading position extended to 1955 mm) • Z-axis travel (slide): 650 mm • Integrated C-axis: 360° rotation, 0.001° resolution, 1–20 rpm speed • Feed rate (X, Y, Z): up to 5,000 mm/min • High-Speed Jump speed: Eagle Power Jump technology up to 18,000 mm/min (18 m/min) WORK TABLE AND MACHINING AREA • Table dimensions: 1140 x 1640 mm • Maximum table load: 7,500 kg (7.5 tons) • Maximum electrode weight: up to 300 kg (manual operation up to 50 kg, automatic operation up to 25 kg) • Work tank: Automatically lifting/lowering tank structure (Lifting container). • Internal tank dimensions: 1270 x 1770 x 680 mm (max. dielectric level: 640 mm) PULSE GENERATOR (Eagle PowerTec) • Technology: Adaptive current control, resistor-less pulse generator. • Pulse shaping: Adaptive waveform (rectangular pulses, modified rectangular pulses, capacitor pulses). • Working current: PT 60 / PT 110 current module (60 A or 110 A depending on the configuration). CONTROL SYSTEM AND HMI COMPUTER • Control model: PC-NC-Dialog (2 x 32 bit), adaptive Eagle PowerTec control with a 17" LCD monitor • HMI unit: Andronic 2060S industrial computer (Intel Celeron M 1.6 GHz, 80 GB hard drive, Soft PLC CoDeSys, InterBus-S). • Operating system: Microsoft Windows® XP® Professional Embedded. • Communication: USB 2.0 ports and Ethernet network interface. • Advanced functions: Orbital erosion, backlash compensation, automatic measuring cycles. • Remote control: PowerTec Handheld with display. AUXILIARY SYSTEMS AND AUTOMATION • Filtration system: Cartridge filters in the base, area approx. 32 m², capacity 2800 liters of dielectric. • Cooling: Compressor unit with a cooling capacity of 7.9 kW. • Lubrication: Automatic centralized axis lubrication. • Safety: Factory-installed fire extinguishing system (16 kg CO₂ cylinder) with automatic monitoring – enables safe unattended operation. LOGISTICAL AND TRANSPORTATION DATA • Transportation dimensions of the machine body (width x depth x height): 2150 x 3600 x 3360 mm • Transportation weight of the machine body: 12,000 kg (12 tons) • Transportation dimensions of the generator: approx. 1800 x 1600 x 2310 mm • Transportation weight of the generator: approx. 640 - 700 kg • Total set weight: approx. 12,640 kg

Condition: good (used), Year of construction: 2002, operating hours: 39,000 h, overall weight: 532 kg, total length: 1,285 mm, total width: 920 mm, total height: 1,050 mm, power: 18.5 kW (25.15 HP), volume flow: 156.6 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, type plate available, Very well-maintained Ingersoll Rand screw compressor, in excellent technical and visual condition. Fully serviced and ready for immediate use. New hour meter installed. 18.5 kW, 2.61 m³/min, 10 Bar. Lhedpfxsztl Uds Afkjk

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Lodpswric Ejfx Afkjhk

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 2,450 mm, table width: 500 mm, table length: 650 mm, table load: 500 kg, overall weight: 8,200 kg, spindle speed (max.): 42,000 rpm, spindle motor power: 15,000 W, swivel angle B-axis (min.): -119 °, swivel angle B-axis (max.): 60 °, swivel angle C-axis (max.): 40 °, number of axes: 5, This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre. Additional equipment • Tool Magazine Capacity: 100 positions Machine Benefits Technical Machine Benefits • Table dimensions: 650 x 500 mm Dimensions Machine Depth 2020 mm Lhodpfx Ajzvv Efjfkek

Condition: used, Year of construction: 2007, operating hours: 5,950 h, MAKE: INGERSOLL RAND TYPE: 12/235 Lhsdpfezlv Nijx Afkek YEAR: 2007 CE MARKED: YES OPERATING HOURS: 5950 HOURS TIRES/UNDERCARRRIAGE: 80% POWER: 225KW ENGINE: YANMAR 6IRQ9A WEIGHT: 5125 KG OPTIONS: NEW COMPLETE FILTER SET: €2500 12 BAR WORKING PRESSURE 23 M3/MIN 13 BAR MAXIMUM PRESSURE GOOD CONDITION, READY FOR IMMEDIATE USE KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low hours EAGLE Powertec PC/NC Control 3060 Lhodpfx Ajyzxd Defkjk 22" touchscreen display MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional remote control Manual EDM operations with Powertec Handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High Speed Jump: max. 18,000 mm / min. Travel (X, Y, Z): 550 x 850 x 450 mm Linear measuring system on all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm 20-position electrode changer with pick-up rotary magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Headload: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filtration system Accessories: Erowa, type UPC Production Chuck CO2 fire extinguishing system Recooling unit

Condition: excellent (used), Year of construction: 2010, operating hours: 50,000 h, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 40,000 rpm, 🔧 Technical Data Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel distances (X/Y/Z): 👉 approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Lhodpfx Afoyxyz Sskjk Year of manufacture: 2010 Main voltage: 400 V / 3~ / 50 Hz Fuse: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major advantage) Manufacturer: KELLER Lufttechnik Model: L-CUT-1-P3-B60-V Motor power: 3.3 kW Year of manufacture: 2010 👉 Integrated dust/smoke extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous operation in toolmaking 🧩 Features CNC control with operator panel 3-axis machining Compact and robust design Complete system including extraction unit Made in Germany 📦 Condition Machine in ongoing production Fully functional Well maintained Inspection under power possible 🚛 Delivery Available at short notice Free loading onto truck 📌 Applications Mold making Electrode manufacturing Precision machining 📞 Note Further images, videos, and technical details available on request. Subject to prior sale.

Condition: used, power: 26 kW (35.35 HP), fuel type: diesel, color: other, fuel: diesel, Year of construction: 2006, operating hours: 1,230 h, Technical information Number of cylinders: 3 Drivetrain Drive: Walking Engine type: Yanmar 3IRH8N Fuel tank: 50 litres Measures and weights Empty weight: 650 kg Dimensions (LxBxH): 336 x 139 x 124 cm Functional Capacity: 186 m³/h Supply voltage: 12 V CE mark: yes Condition General condition: average Lhsdpfx Aozp Hklefkok Technical condition: good Visual appearance: average Working pressure – 7 bar (psi)

Condition: excellent (used), Year of construction: 2005, MANUFACTURER: INGERSOLL RAND MODEL: NIRVANA N75 SERIAL NO.: 2770893 YEAR: 2005 POWER (kW): 75 CAPACITY (m3/min): 12.5 PRESSURE (bar): 10 Lhodpfx Afjyk Unijkok HOURS (DOC/TOTAL): FREQUENCY INVERTER: yes BUILT-IN DRYER: no HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. Lodpfx Aovwa Nbjfkjhk For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: used, Year of construction: 2008, functionality: fully functional, 1. Wire EDM machine, OPS INGERSOLL Gantry Eagle 800, Lhsdjy Ifu Nepfx Afkok with IMC5 handling system, year of manufacture 2008. In very good condition and in operation until December 2025. Now dismantled. Includes 1 cooling unit, M.T.A TAE EVO M10 (year of manufacture 2012). 1 fire extinguishing system, Kraft & Bauer FB703. Weight approx. 6,700 kg. Available for sale at a favorable price. Price significantly reduced!