Used Infrared for sale (243)

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm Rodpfx Aceyi Ekfjvjr • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: ready for operation (used), Year of construction: 2011, operating hours: 9,339 h, travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: Sinumeric 840D, total height: 2,253 mm, table load: 10 kg, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, number of axes: 5, This 5-axis DMG ULTRASONIC 10 was manufactured in 2011. It features a Siemens Sinumeric 840D control, a spindle with 40,000 rpm max speed, and a tool magazine with 60 slots. The machine offers a compact footprint and includes options like a DMG PP-400 Infrared probe and RS NC-4 tool measurement. If you are looking to get high-quality milling capabilities consider the DMG ULTRASONIC 10 machine we have for sale. Contact us for more information about this machine. Additional equipment • Workpiece Measurement: DMG PP-400 Infrared probe • Tool Measurement: RS NC-4 • Coolant Conditioning Equipment: KM 10 Machine Benefits Technical Machine Benefits Redpfex D Naxsx Acvjr • Surface area: less than 2 m² • Required space (lxwxh): 4100x3700x2300 mm • Machine on time: 2773 hours • A axis: -10° to 120° • C axis: 360° • Feedrate – feed speed range: up to 10000 mm/min • Repeatability in x / y / z: p8 μm Extra Information Workpiece NC Table with Clamping Surface: ø 190 mm ed of Rotary Axes (A / C): 100 rpm / 150 rpm Positioning Accuracy (A / C Axis): ± 5 Tools Tool Magazine: 60 items, chain magazine Chip-to-Chip Replacement Time: 15 seconds Media Compressed Air Required: 6 bar Average Air Consumption: 20 m³/hour Working Voltage: 400V (N / PE) / 50A Dimensions Machine Depth 775 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment • Samsys bar loader, including extension Rodox D Iuzjpfx Acvjr • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,215 h, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 20,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5 axis MTcut UDS80H-5A was manufactured in 2019. It features a 20,000 rpm spindle, 120 Nm torque, and 35 kW drive power. Equipped with a HSK63 tool holder, 96-position tool changer, and a Kessler rotary tilting table with an 800 mm diameter. Includes Heidenhain TNC 640 control, 15" TFT screen, and Ethernet connectivity. Ideal for precision machining with its Heidenhain glass scales and BLUM laser tool measurement. Contact us for more information about this machine. • Operating hours: Control unit 6,904 h; Machine 5,480 h; Program runtime 2,215 h • Spindle: 120 Nm torque, separate spindle cooling for constant temperature • Tool interface: HSK63 with blow-out function • Rotary table: 800 mm diameter; Kessler rotary tilting table with 2 A-axes and 1 C-axis, direct-drive torque motors • Feedback: Heidenhain glass scales in all 5 axes • Tool changer: 96 positions with double-arm gripper • Control: 15" color TFT screen • Connectivity: Ethernet interface, 2x USB ports • Control functions: Plain text programming; short block processing time; create new program while another is running; proven Heidenhain machining cycles • Electronic handwheel • CE certified Additional equipment • Chip conveyor • Coolant system • Internal high-pressure coolant 50 bar with belt filter system • Coolant and compressed air gun • BLUM laser tool measurement • Heidenhain TS460 workpiece probe system for HSK63 with radio and infrared transmission • Heidenhain KinematicsOpt including Heidenhain calibration sphere KKH 250 • Extraction system: Filtermist FX4002, air volume 1,250 m³/h • Rotating viewing window • Work area light • Tool package Technical Specification Taper Size HSK 63 Rodox D In Uopfx Acver

Condition: ready for operation (used), Year of construction: 2012, operating hours: 14,297 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 65 monoBlock was manufactured in 2012. It features a vertical machining center with an 18000 rpm spindle and a 3D infrared probe. The machine dimensions are X: 735mm, Y: 650mm, Z: 560mm. Ideal for complex and precise machining tasks, the DECKEL MAHO DMU 65 monoBlock machine we have for sale. Contact us for further details regarding this vertical machining center. Additional equipment • Magnetic plate • 3D infrared probe Machine Benefits Rodpfx Ajx D N Nmjcver Qualitative Machine Benefits • Robust and precise with significant spindle time indicating reliability Technical Machine Benefits • High spindle speed (18000 rpm) for efficient machining • Large travel ranges for versatile machining operations • Hours machine on: 33358h / working hours: 14393h • Tool changer number = 30 magazine positions Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre including a Schuler automation. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Schuler automation • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Technical Machine Benefits • Production hours: 54347 operating hours, spindle hours 26748 (new spindle has 3,500 hours) Rsdpfx Ajyaam Ascvor • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel"Optional: more palletsServiced regularlyGeometry protocol dated 5 February 2026Regrinding of the spindle cone: €1,500–€3,000

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 620 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, This 5-axis POSmill H 500 U was manufactured in 2018, featuring a vertical machining center with X-620, Y-820, Z-650 travel dimensions, and a 60-space workshop. It includes internal coolant supply plus air cooling and is equipped with a Heidenhain iTNC-530 control for five-axis simultaneous milling. If you are looking to get high-quality milling capabilities consider the POSmill H 500 U machine we have for sale. Contact us for more information about this machine. Additional equipment Rsdpfx Aox D Niaocvjr • Optional chucks and approx. 260 HSK63 holders with rack • CAD-CAM Hypermill OPEN MIND license for 5-axis simultaneous milling not inckluded but for sale • Note: The Y-axis is louder than it should be. We recommend replacing the bearings for the Y-axis. However, the machine is running and is still in production. Machine Benefits Technical Machine Benefits • Workshop 60-space / internal cooling / internal coolant supply plus air cooling Extra Information Milling spindle S = 18,000 rpm, HSK-A 63 Heidenhain - Linear measuring system X, Y, Z/ Air purge for all linear measuring systems/ Active air-to-air control cabinet cooler/ Active cooling for the 4th and 5th axes, controlled Network connection + USB connection/ Spindle cooler, controlled/ Heidenhain iTNC 530 control panel, right-hand side/ Heidenhain rotation measuring system/ POS kinematic module including reference ball/ POS contour lock/ Automatically controlled crane loading hatch External hinged chip conveyor/ Coolant pump on the head via M functions Pump for chip flushing device/ Chip flushing device/ Water gun/ Operating status indicator Air at the spindle/ Electromechanical oil/coolant separator/ Automatic coolant level monitoring/ 3-way media connection in the Table center/ Hydraulic power unit including M-function control Mobile electronic handwheel/ Variants included in the special price/ Through-spindle air/ 60-station HSK-A 63 tool changer/ Internal coolant supply 20 bar with belt filter unit/ Kessler table diameter 500 mm/ Preparation for workpiece measurement/ Infrared workpiece measurement - 3D probe Tool measurement via BLUM laser/ Rotating viewing window/ POS DCM collision module

Condition: good (used), Year of construction: 2016, Posmill H 800 U, year of manufacture 2016, Heidenhain control, travel X/Y/Z 670/820/600 mm, 2-axis NC swivel rotary table, 96-position tool changer, HSK 63 spindle interface, spindle speed up to 18,000 rpm, 3D infrared probe Heidenhain, Blum laser tool measurement, rotary table Ø 800 mm. Rjdpfx Asyvr Ifocvor

Condition: good (used), Year of construction: 2016, Posmill 2050, year of manufacture 2016, Heidenhain control, X/Y/Z travel 2050/1050/780 mm, 60-tool changer, spindle speed up to 12,000 rpm, HSK 63 tool holder, 3D infrared measuring probe MH, Blum laser tool measurement. Rjdpfx Asyvqczecver

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you the following: Technical data: Control system: Heidenhain TNC 640 Traverse paths: X-axis: 750 mm Y-axis: 650 mm Z-axis: 560 mm C-axis: 360° B-axis: -5° to +110° Main spindle: Spindle speed: max. 20,000 rpm Drive power: 35 / 25 kW Table dimensions: Table size: 800 x 650 mm Rotary table diameter: 650 mm Tool changer: Tool holder: SK 40 Number of tool pockets: 120 positions Operating hours: approx. 23,450 h Spindle hours: approx. 11,700 h Technical features & accessories: - MPC, Machine Protection Control - Coolant ring nozzle - Rinsing gun, 3 bar - Mechanical oil and emulsion mist separator - Cooling system with air blast through the spindle center - Infrared probe, Heidenhain TS 460 - 3D quickSET expansion package - Production and automation package, comprising: - Preparation for automation/handling system - Scraper belt chip conveyor Rjdpfoyr Nt Nox Acvsr - ICS, coolant system 40 bar, 600 l tank, paper band filter - Operating mode 4 - ATC (Application Tuning Cycle) - Mechanical tool breakage control - Automation: PH Cell 150 with 6 pallet stations Accessories, depicted tools, and clamping devices are included only if specified in the additional information. Specifications and details are subject to change and errors excepted. Prior sale reserved!

Condition: good (used), Year of construction: 2021, travel distance X-axis: 950 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, We offer you: Universal CNC Machining Center Manufacturer: DMG MORI Model: DMU 95 monoBlock Year of manufacture: 2021 Control: Celos with Siemens 840D sl Operate Travels: - X-axis travel: 950 mm - Y-axis travel: 850 mm - Z-axis travel: 650 mm - C-axis: 360° - A-axis: +/- 120° Main spindle: - Speed: 20,000 rpm - Drive power (40/100%): 25 / 35 kW - Torque: 130 / 86 Nm - Tool holder: HSK-63A Worktable: - Fixed table with integrated rotary table - Table diameter: C-axis 850 x 750 mm integrated in fixed table 1,000 mm x 750 mm - Max. table load: 1,000 kg - Max. workpiece dimensions: Ø 1,040 mm (clampable) / Ø 850 mm (machinable), height 590 mm Tool changer: - Number of tool positions: 60 - Tool change time (chip-to-chip): 5.9 s - Max. tool diameter: 80 / 160 mm - Max. tool length: 420 mm - Max. tool weight: 8 kg Rapid traverse: - Rapid traverse speed (X/Y/Z): 40 m/min - Max. feed speed (X/Y/Z): 40,000 mm/min - Power-on hours: approx. 25,300 h - Operating hours: approx. 7,200 h Technical features and accessories: - Double-gripper tool changer - MPC – Machine Protection Control - Economic Production Package (GER / EU) - Production package: Scraper flight conveyor with coolant system 600 l / 160 gallons Paper band filter Internal coolant supply, 40 bar / 23 l/min, through the spindle center (AD) External coolant supply, 4 bar – 40 l/min (theoretical pump capacity) Chip flushing in the cabinet door (no standard coolant tank) - Spray gun for chip cleaning - Air blast cooling through the spindle center, selectable via M function Rodpfx Acex Ekt Eever - Chip flushing in the cabin door: 1.5 bar / 60 l/min (theoretical pump capacity, recommended for high chip volumes) - Coolant ring nozzle for the vertical head: 16 water jets, 7 air jets - Mechanical and electrical interface for oil and emulsion mist extractor - Infrared probe, type Renishaw PP60 optical (OMP 60) - Tool measurement in the work area, Blum Laser DIGILOG - 3D quickSET preparation - SGS – Spindle Growth Sensor - Increased accuracy - Electronic handwheel - ATC (Application Tuning Cycle), programmable feed parameter selection for the machining process: accuracy / surface quality / speed - DECKEL MAHO MDynamics package - IoTconnector - Machine Data Connector (MDC) - NETservice - SERVICEcamera - 3D data model in STEP format for integration into CAD systems The clamping devices shown are not included in the scope of delivery. Accessories and depicted tools are only included if specified in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol Redpfx Aoxgnz Tjcver - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Rjdpfx Asyvt Exjcver Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axes Travel measuring system with correction Clamping surface Ø 700 x 500 mm Rsdpfx Aswglfxscvor Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined!

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system Rjdpfxsxyf E No Acvor • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: good (used), Year of construction: 2008, Refurbished: 2008 Format: max 320 x 470 mm; min 133 x 152 mm Product thickness: max 96 pages 57 g/m² mm Stack height pre-stack basket: 127 mm Total stack height: 330 mm Infeed height: 470 - 1,146 mm Outfeed height: 876 mm Output: max 100,000 copies/h Equipment - Inlet with discharge - Double press - Infrared counter - Outfeed left Rsdpfxjqpgmcs Acvjr - Outfeed conveyor

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Rsdpsya I Iuefx Acver Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide belt sanding machine with cross and longitudinal unit for sanding, among other things, veneer before lacquering. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm constant Workpiece thickness max.: 3–140 mm Transport bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, including extraction device Feed speed: 4.5–22 m/min, adjustable Units: cross/longitudinal/brush Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Brush material: fibre 1. Cross sanding unit - Wear-free brake system - Pneumatic belt tensioning - Belt run monitoring - Pressure lamella belt system, intermittent belt cleaning device - Sanding belt dimensions: 4900 x 150 mm - Belt sanding speed: 12 + 24 m/s - Drive power: 13 / 17 kW 2. Longitudinal sanding unit - Infinitely variable electronic control of sanding belt speed via frequency inverter - Wear-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Belt control: infrared - Sanding belt in counter-rotation - Sanding belt dimensions: 2620 x 1350 mm - Belt sanding speed: 0.3 – 12 m/s - Drive power: 11 kW Graphical operating terminal for entering machine settings, including numerical thickness adjustment as well as fault source, workpiece passage, and feed speed display Rsdpfx Aceya I Riovsr Electronically controlled pressure beam Roller spacing: 40 mm Pneumatic belt tensioning The contact surfaces of the pressure beam automatically adapt to the shape of the workpieces passing through Weight approx. 5500 kg Space requirement approx. 2550 x 2675 x 2400 mm

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Rjdpfx Aoyi Emyocvjr Solema Autoload Year: 2000 Nipping machine Sigloch NHG-60 1 Year: 1999 Description: - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Sigloch SB 3100/2 Year: 2005 Description: - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Description: - 2 pressing stations

Condition: excellent (used), Year of construction: 2016, 5-Axis Universal Machining Center DMG Mori ecoMill 50 Control: Heidenhain TNC 620 Year of manufacture: 2016 Travels: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: °-5/+110 C-axis: °360 Clamping surface rotary axis: Ø 630 x 500 mm Redpoyk T Inofx Acvjr Spindle interface: SK 40 Tool magazine: 32 slots Speed: 12,000 rpm Internal coolant – 12 bar high-pressure pump Accessories: Chip conveyor 3D infrared measuring probe Table probe

Condition: used, Year of construction: 2008, Infrared dryer, consisting of: Module 1: - 3 IRM lamps with a power of 3500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 10.5 kW Module 2: - 2 IRM lamps with a power output of 3,500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 7.0 kWTotal connection approx. 19.5 kW/400 V/50 HzExhaust air: - Exhaust air fan approx. 1,800 m³/h - Supply air/room air approx. 1,800 m³/h - Extraction nozzle D160mm ROLLER CONVEYOR - Celfa - Year of manufacture 2008 - Steel rollers with heat protection tape wrapped around - Roller spacing 160 mm - Feed via hand wheel adjustment - Installation length 2,000 mm - Feed approx. 3 - 7.5 m/min. - Including control cabinet Rjdjwub Uxjpfx Acvjr - 400V/50Hz

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm Rjdpfx Asrx S Ipocvor - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: new, Year of construction: 2015, operating hours: 3,000 h, Operating hours: 3000_____Water tank 800 litresEquipped with: 160 cm dosing unit Side shift 60 cm to the right Prepared for GPS integrationOptional: Rear camera 120 cm dosing unit 500 or 1,150 litre water tank Surface water pump (leak and basket) High capacity side nozzles- Bracket for standpipe for hydrants Mounted on equipment carrier, e.g. B. Holder, Wille, Multihog Hand lance with 15 m water hose on the drumEquipment: Capacity per day: 17,000-35,000 m²/day* Operating speed with 100% weed coverage (min.): 0.5 km/h Average treatment speed: 3-5 km/h Operating speed with low weed coverage: min. 5 km/h Water consumption when controlling weeds (min.): 34 l/min Drive via hydraulic system of the carrier vehicle (min. 60l/min at 180 bar) 2 x high-tech burners 110 KW with at least 92% efficiency according to EN 303-2 Burner emission class: > EURO 6 Automatic water softening system with 5 L canister and level monitoring Control unit with touchscreen screen for controlling and monitoring the system in the carrier vehicle, data storage for 5 days and reading of the daily output via USB stick (Excel format) Preparation for GPS integration Water pressure at Weed control: 0.2 bar Water temperature on the plant during weed control: 98-99.6°C Active temperature control (software controlled - no bypass control) for a constant water temperature of 99.6°C (+/- 0.6°C) Burner drive: diesel or Aspen D biodiesel Burner tank capacity: 105 l Water tank capacity: 800 l Standpipe holder Rear view camera Sensor-based dosing unit with infrared sensors, application system: 2 rows with 20 valves in 4 independent sections Dosing unit: working width 160 cm, side working nozzles (2 left, 2 right), additional 2 high-performance nozzles left and right, with 60 cm side shift on the right Stainless steel hose reel with 15 meter hose and 20 cm hand lance Adapter and frame with support feet for mounting the unit on the carrier vehicle Water tank (plastic) 800 liters with C-pipe connection and level indicator, dry-run protection, water filter Standard color: RAL 9006 Weight heating unit (net): 560 kg (without water and fuel) Machine dimensions: (LxWxH) 3,500 x 1,750 x 1,600 mm Weight dosing unit: 340 kg,Storage location:null Rsdpfx Aju Hf A Ajcver

Condition: ready for operation (used), Year of construction: 2016, A vertical CNC 3-axis gantry machining center POS is available. Travel X/Y/Z: 2050mm/1050mm/780mm, table dimensions X/Y: 2200mm/1000mm, max. table load: 3000kg, tool holder: HSK-63, tool stations: 60, speed: 18000rpm, rapid traverse: 30m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 6500mm/4200mm/3800mm, weight: approx. 20000kg, control: Heidenhain, spindle hours: 10375h. Including infrared probe, IKZ and Blum tool measurement. Documentation available. An on-site inspection is possible. Rjdpfoyuyv Hsx Acver

Condition: ready for operation (used), Year of construction: 2016, A vertical CNC 5-axis machining center POS is available. Travel X/Y/Z: 670mm/820mm/600mm, rotary table diameter: 800mm, max. table load: 1200kg, tool positions: 96, tool holder: HSK-63, speed: 18000rpm, A-axis: -100°/120°, C-axis: 360°, weight: approx. 20000kg, control: Heidenhain, operating hours: 22177h, spindle hours: 9601h. Including infrared probe, IKZ and Blum laser tool measurement. Documentation available. An on-site inspection is possible. Rjdpfx Aeyuyv Tocvsr