Used Infrared for sale (261)

Condition: excellent (used), Vötsch "Headlight Test Bench – Weiss/Vötsch VCS³ 4100-5-S (Indoor & Outdoor), available from calendar week 40" Year of manufacture: 2018 For sale is a complete temperature and climate testing system for front headlights, consisting of two coupled Vötsch VCS³ 4100-5-S climate test chambers (indoor & outdoor versions). The system was specially developed for the automotive industry and enables combined environmental testing to OEM standards. Main Features - Temperature and climate testing - Rain/spray simulation (flow rate 1–18 l/min, spray temperature 5–32 °C, 200 l tank) - Infrared irradiation (4 × 1.2 kW) for solar load simulation - Vacuum unit (0–50 Pa) for leak testing - Airflow up to 15 m/s (driving wind simulation) - Real-time webcam monitoring - Comprehensive sensor suite (temperature and humidity sensors) - Additional power supplies for test specimens (12–48 V) Outdoor chamber (VCS³ 4100-5-S Outdoor): - Temperature range: –20 … +80 °C - Heating rate: 5 K/min | Cooling rate: 3 K/min - Humidity range: 4 … 95% rH - Dew point range: –30 … +79 °C - Extras: webcam, 5 temperature sensors Indoor chamber (VCS³ 4100-5-S Indoor): - Temperature range: –20 … +125 °C - Heating rate: 8 K/min | Cooling rate: 5 K/min - Humidity range: 4 … 95% rH - Dew point range: –30 … +88 °C - Vacuum unit: 0 … 50 Pa - Airflow: 0 … 15 m/s - Extras: 4 power supplies (12–48 V), 3 temperature sensors, 2 humidity sensors Application areas Ideal for testing headlights and similar components under real-world conditions. Suitable for use in automotive development, quality assurance, approval tests, and durability testing. Weight estimation (approximate) - 2× Vötsch VCS³ 4100-5-S base units: approx. 2 × 840 kg = 1,680 kg (typical catalog value per unit). - Additional equipment/peripherals (rain, IR, vacuum, airflow, control cabinets, cabling, partition wall): approx. +400 to +900 kg. - Water in tank (200 l): +200 kg during operation. - Transport “dry” (empty tank): approx. 2.1–2.6 t - Operation “wet” (full tank): approx. 2.3–2.8 t - Summary: approx. 2.1–2.8 t Scope of delivery Dedpfxsw S Ilke Ahuskw - Vötsch VCS³ 4100-5-S indoor chamber - Vötsch VCS³ 4100-5-S outdoor chamber - Partition wall for VCS³ 4100-5-S - Dimensions: Height × Width = 80 × 80 cm - Rain/IR/vacuum/airflow units - Condition: used - Scope of delivery: (see picture) (Changes and errors in technical data, specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, High-Performance Gantry Machining Center, 3-Axis Only 917 spindle hours (as of July 2025) Manufacturer: HEDELIUS Model: FORTE 65 Single Year of manufacture: 2022 Control unit: Heidenhain TNC 640 F Tool holder: SK40 Operating hours, approx. (as of July 2025): Spindle running time: 917 h Program running time: 1,119 h Machine powered on: 3,675 h TECHNICAL DETAILS: 3 axes Travel range, X, Y, Z axes: 1,320 mm, 650 mm, 600 mm Rapids X, Y, Z axes: 0-40, 40, 40 m/min Spindle power: 29 kW / 183 Nm Spindle speed: 50–14,000 rpm EQUIPMENT: ZeroClamp zero-point clamping system, 6/4-position Forte 65, 120 mm diameter IKZ internal coolant supply with 25 bar Inclined bed band filter system, 900 l LTA 3001 exhaust air filter (1,200 m³/h) Blow-off gun Rinsing gun Infrared receiver M&H 91.40 TNC 640 3D infrared touch probe M&H 25.50 Internal compressed air supply through main spindle via M-function (5 bar) 65-position tool magazine Fixed machine table Scraper-type chip conveyor Direct length measurement systems from Heidenhain Spindle chiller Automatic central lubrication for X, Y, Z axes Work area lighting Precision ground ball screws Control cabinet air-conditioning unit Spindle cooler Dsdpfx Aew U Egdohuskw Coolant supply, semicircular around spindle Original price over €250,000 This used machine can be inspected under production conditions. All information without guarantee – sale subject to exclusion of any warranties or guarantees. Prior sale reserved.

Condition: like new (used), Binder CB 260 E7 as good as new. PRODUCT DESCRIPTION The powerful and versatile CB CO₂ incubator is suitable for cell tests in substance research and medical research. Thanks to its extensive range of options and accessories, the BINDER incubator can easily handle complex culture tasks or individually defined growth conditions with low oxygen concentrations. KEY FEATURES Optimised two-chamber humidification system with anti-fogging protection Djdpfx Asv Up Dvehuskw Proven anti-contamination concept with 180°C heat sterilisation Hot-air sterilised CO₂ sensor with single-source infrared technology Seamless stainless steel inner cup with beads as slide-in supports Fanless interior with Venturi CO₂ gas mixing nozzle Intuitively operated touch controller Internal measurement data logging system, via USB port, readout in a publicly available format Fault diagnostic system with visual and acoustic alarm Connections: Ethernet, USB, potential-free alarm contact CO₂ Fail Safe system for pH safety of cell cultures

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, Equipment: chip conveyor, rotational speed infinitely variable, Kunzmann BA 1000 Year of manufacture: 2015 Dedpfx Ahewlg Tbsuokw Control: Heidenhain iTNC 530 32-position tool changer, SK40 Heidenhain table probe Prepared for 3D infrared probe Heidenhain handwheel HR410 Linear scales on all axes Hinged belt chip conveyor Internal coolant supply, 20 bar Oil mist extractor Operating hours approx. 17,800 Spindle hours approx. 6,200 The machine can be inspected at our facility.

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Dodpowz I Acsfx Ahuskw Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: 828 D, _____ Description: Year of manuf. : 2021 Control : Siemens 828 D Speed : 12000 rpm Movement X/Y/Z : 550/550/510 mm Tool holder : SK40 Spindle: Technology:Inline spindle Speed:12,000 rpm Power (max.):13 kW Tool holder:SK40 Work table: Clamping surface:850 x 650 mm Table load (max.):600 kg General: Tool magazine:24 stations with double gripper Rapid traverse in X/Y/Z:24 m/min Features/Accessories: Dsdpfx Ahsxfflgoujkw Chip management:Chip conveyor Coolant management:IKZ system with 20 bar Tool measurement:Renishaw, TS27R Workpiece measurement:Renishaw 3D measuring probe (infrared) Additional equipment:Mechanical preparation for oil mist separator

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 Dkedpfx Aexgnz Tohujw - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 06601, feed rate X-axis: 12 m/min, empty load weight: 2,500 kg, Equipment: CE marking, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Minimum workpiece thickness: 10 mm Maximum thickness of roll material: 3 mm Feed speed: 12 m/min Heating time: 10 min Guillotine for trimming: 0.2 – 3.0 mm Dkjdpfx Aexuqwmehuow MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,500 x 1,000 x 1,600 mm Weight: 2,500 kg EQUIPMENT Jointing unit with 2 milling units Automatic roll magazine Solid edge magazine Pre-heating of panels by infrared heater Automatic gluing with granulate glue pot Cross-cut saw with programmable angle setting Multi-function unit Corner rounding/copying unit with 2 motors Profile scraper Flat scraper Buffing unit Unit indicator with mechanical numeric display Control via operator panel Operation via selector switch / push buttons Protective hood CE marking

Condition: like new (used), Device as new ex demo. Description The Binder CO2 incubator type CB210 is ideal for sensitive incubation applications and ensures optimal cell growth. This CO2 incubator can be used, among others, in tissue bioengineering, in vitro fertilization (IVF) clinics and teaching hospitals. The Binder CB210 also contains six compartments. The amount of CO2 is measured using a built-in infrared sensor. The outer door is made of stainless steel. In addition, this CO2 incubator is equipped with six shelves and forced convection. Technical data Voltage: 230 V, 50/60 Hz Current: 6.6 A Power: 1.5 kW CO2 control range: 0 – 20% Temperature range: approx. 7 °C above ambient temperature up to 60 °C External dimensions (W) x (D) x (H): 74 x 79 x 106 cm Internal dimensions (W) x (D) x (H): 58 x 44 x 75 cm Dkodpswfh T Asfx Ahuow

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, MACHINE BUILT 2009 / COMPLETELY REFURBISHED 2025 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 32- Number of stations B3 - Format 35 x 50 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 32stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) 1 Prepiling-System for all stations Type MKW VS 3 - Mobile stacking pallets - Format up to 35 x 50 cm - 30 units fixed installation in front of the machine - 2 mobile stations in front of the collator (15+2+15) - 2 mobile pallets per station inclusive 1 High-Pile Non-Stop Delivery Unit Type MKW RAPID TD-3 - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Stacking function adjustable: straight stacking or offset function - Automatic delivery onto buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Djdpfjxdy R Iex Ahuskw Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 22.198, input frequency: 50 Hz, Showroom model Fully CNC-controlled edge bander, very comprehensively equipped: Pre-milling unit Gluing unit Front and rear cut-off saw unit Fine milling unit (top and bottom) Corner rounding unit (front and rear) Radius scraper unit Additional options available: Infeed roller for 2 types of edge bands, including solid up to 5 mm. R-8 N glue scraper unit. PC 19” touch screen (new). CNC-controlled infeed guide. Pre-milling unit with 65 mm high diamond tools. Pneumatic on/off. Dedsw Ufuhjpfx Ahuokw Infrared lamp at infeed. Universal feed rule. Antistatic at infeed (type Riepe) Anti-adhesive unit after the milling unit (type Riepe) Cleaning unit at outfeed (type Riepe) LED in the cabin. WiFi Kit unit. LED motion system. Duo Melt EVA/PUR glue unit. Nesting for panels with hinge holes. Automatic chain lubrication.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, The Acosgraf drying tunnel (80 cm wide conveyor belt). The tunnel consists of 5 modules with the following configuration: Sections 1 and 2: Hot air. Sections 3 and 4: Hot air and infrared. Dkodpfxoxk T Hve Ahujw Section 5: Cold air (natural ventilation). Sartech is a company specializing in solutions for screen printing, automation, and robotics, as well as the manufacturing of UV (electronic) or hot air tunnels.

Condition: excellent (used), For sale: 3 FINSCAN lines: 1x Finscan camera sorting line Boardmaster HD Dodpfxsxrcbre Ahujkw Year of manufacture: 2012 1x Finscan NOVA No need to turn the pieces and without infrared lights. Speed: 200 pcs/min Year of manufacture: 2014 1x Finscan NOVA Camera sorting, speed 200–220 pcs/min. No need to turn the pieces and without infrared lights. Year of manufacture: 2018

Condition: excellent (used), Year of construction: 2000, x-travel 2500 mm y-travel 800 mm z-travel 750 mm Control HEIDENHAIN TNC430i table dimension - longitudinal 3220 mm Dodpfx Asxa Hl Dehuskw table dimension - cross 800 mm tool taper ISO SK40 spindle turning speed range 15000 U/min connected load 25 kVA tool change unit 40 Pos. weight of the machine ca. 20 t dimensions of the machine ca. 6,5 x 3,8 x 3,7 m This HEDELIUS BC80 is in good condition and can be viewed under power by arrangement with the seller. Description: Designation: Hedelius BC80 Type: 4-axis machining centre Control: Heidenhain TNC430i Year of manufacture: 2000 Travel distance X: 2500 mm Travel distance Y: 800 mm Travel distance Z: 750 mm Table clamping surface: 3220 x 800 mm Tool holder: SK40 Tool changer: 40-fold Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition wall for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Flushing guns - Renishaw TS27R tool measuring system - Renishaw infrared workpiece measuring system - Ethernet connection - Hand-held control module Other: - Ball screw drive in X and Y replaced in 2018 - Complete documentation available Machine weight: Approx. 20 t Space requirement: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Year of construction: 2021, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: Muratex Textile Laminator, Item No. Component Description 1 Motorized Film Unwind Unit 2.5” airshaft; max roll diameter Ø400 mm. Integrated dancer system for tension control. 2 LED Lighting Panel Illuminates working area to ensure operational visibility. 3 Motorized Vinyl Unwind Unit 2.5” airshaft; max roll diameter Ø300 mm. Includes load cell system for accurate tension feedback. 4 Infrared (IR) Dryer Panel Provides efficient surface heating for bonding layers. 5 Top Silicone-Coated Cylinder Heatable up to 100°C. Used to apply heat during lamination. 6 Bottom Silicone-Coated Cylinder (Heated) Pneumatically actuated (up/down). Heatable up to 100°C. Enhances bonding precision. 7 Top Silicone-Coated Cylinder (Water-Cooled) Water-cooled for material stabilization post-lamination. 8 Bottom Silicone-Coated Cylinder (Water-Cooled) Pneumatically actuated (up/down). Water-cooled for heat regulation and pressure control. 9 Anti-Static Bar Removes static electricity from materials during processing. 10 Bonded Web Rewind Unit 2.5” airshaft and clutch system; supports rewinding up to Ø300 mm. 11 End Lighting Panel Provides terminal illumination for visual inspection and quality control. 12 Stainless Steel Free Roll (Water-Cooled) Cools bonded web while maintaining a smooth feed path. 13 Spare Bonded Web Rewind Unit Additional rewind unit with 2.5” airshaft and clutch system; Ø300 mm capacity. 14 Hoist Unit Lifts and positions rolls via airshaft edges using an arm mechanism. 15 Film Dancer System Compensates for tension variation during film feeding. 16 Load Cell System with Free Roll Delivers real-time tension measurement and feedback for system regulation. 6m length overhead lifting frame with hoist Dedpfx Ahowy H Tkjuekw

Condition: good (used), Year of construction: 2003, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, Used 5-axis machining center from DMG with low spindle hours DMG Deckel Maho DMU 200 P Year of manufacture: 2003 Condition: Good and fully functional Spindle hours: 17,580 Control: Heidenhain iTNC 530 X-travel: 1800 mm Y-travel: 2000 mm Z-travel: 1100 mm Technical specifications: - Rotary table D1400 x 1700 mm - Table load capacity 6,000 kg - B-axis - 60-position tool changer - SK 50 - 10,000 rpm - ICS (internal coolant supply) - 980 liter coolant tank - Chip conveyor - Rinse gun - Infrared probe Transport and commissioning can be offered separately. Interim sale reserved. No guarantee is given for the technical details provided here. Statutory provisions apply. Dksdpfx Ajxlifqohuew

Condition: ready for operation (used), A CNC 4-axis universal milling machine DMG DMU 80 T is available. Travel X/Y/Z: 880mm/630mm/630mm, spindle speed: 12000rpm, spindle power: 15kW/10kW, tool holder: SK40, tool magazine: 32, table dimensions X/Y: 1250mm/700mm, max. table load: 600kg, infrared probe: Heidenhain TS 631. Machine dimensions X/Y/Z: approx. 7600mm/3350mm/2750mm, weight: approx. 8800kg, control: Heidenhain TNC 430. Including automation extension Promot. Documentation available. An on-site inspection is possible. Dkedpexg Ritofx Ahuow

Condition: excellent (used), Year of construction: 2014, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - A/B Round- Axis re-placed - Manufacturer checked usedmachine Basic machine G350 AB Generation 0 Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Work area door, automatic Machine control HEIDENHAIN iTNC 530 Optimizing the machine kinematics with KinematicOpt Collision monitoring DCM Collision (HEIDENHAIN) Dksdjruqp Dopfx Ahusw Tilting table unit (A'-axis) Rotary table with T-slots (B'-axis), Customized coupling system TK57 Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW Single disk-type tool magazine HSK-A 63 with 34 tool pockets Additional tool magazine TM99 HSK-A 63 with 99 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT A‘=-180°(BLUM) Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (38 bar, ICS) Compressed air feed through spindle center Changeable cutting fluid pressure increase Oil skimmer for cutting fluid care Air gun at the work area Flushing gun Rotary distributor in B'-axis rotary table Infrared touch probe m&h Remote machine diagnostics Warranty for Quality Checked Used Machine, 3 month

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers Dkedpfswkf Ihjx Ahusw - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: excellent (used), Year of construction: 2019, operating hours: 1,180 h, functionality: fully functional, machine/vehicle number: 4596, travel distance X-axis: 16,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 31 kVA, torque: 50 Nm, controller manufacturer: Siemens, controller model: 840D, workpiece length (max.): 14,000 mm, workpiece width (max.): 4,000 mm, workpiece height (max.): 400 mm, table width: 4,000 mm, table height: 700 mm, table length: 14,000 mm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 1,180 h, distance table center to spindle nose: 590 mm, spindle motor power: 31,000 W, number of spindles: 1, number of slots in tool magazine: 24, tool length: 240 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Reichenbacher Vision III with Vacuum Table: - 5-axis machining for materials such as wood or composites (GRP sandwich panels) - Vacuum table with 64 zones - 5-axis unit with gimbal-mounted spindle - Air nozzle with ionization - Torque support with compressed air feed-through - Centralized lubrication - 24-position rotary tool changer - Pick-up station for 500 mm saw blade - 5-axis extraction hood (height adjustable) - Extraction slot on the gantry Dkodpfxexcnrdo Ahuow - Siemens Sinumerik 840D sl control system - Solid CAM post-processor - 19" touchscreen display - Handheld controller option - 3D measuring probe (infrared) - Measuring stylus with disc attachment - Vibration monitoring (IFM) - Minimum quantity lubrication with 9 l tank - Tool measurement and breakage detection. "LaserControl" system - Enclosed gantry with safety edges in bumper version - UPS

Condition: new, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, loading space length: 2,020 mm, loading space width: 1,850 mm, loading space height: 350 mm, color: grey, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Your authorized ISUZU specialist dealer, with expertise, service, and consulting, offers you the following: ISUZU Space Cab LS AT 4WD + 3-way tipper + upgraded to 3.5 t with wedge-vario snow plough and silo spreader AVAILABLE FOR IMMEDIATE DELIVERY Equipment: - 6-speed automatic transmission - Switchable 4WD while driving (up to 100 km/h) + low-range gearbox - Fuel-efficient common-rail turbo diesel engine with 120 kW (163 hp) WARRANTY: - 12-year anti-perforation warranty - 5 years or up to 100,000 km (whichever comes first) BODY: - Heated exterior mirrors in vehicle colour with integrated indicators - Radiator grille: metallic gray - Bumpers front/rear in vehicle colour, electrically adjustable exterior mirrors: electrically folding - Front and rear mud flaps SAFETY: - Lane departure warning (passive & active) - Whiplash protection, multi-collision brake, fog lights - Traffic sign recognition with intelligent speed limiter - Airbags: driver & passenger (deactivatable), curtain airbags, driver knee airbag, front side airbags & side impact protection in doors - Driver attention assistant, emergency braking system & collision warning, turning assistant, emergency stop signal, E-Call - 3-point seatbelts, height adjustable - Misacceleration prevention (automatic only), ABS with electronic brakeforce distribution (EBD), hill start assist (HSA) & hill descent control (HDC) - On-board tool kit and jack - Brake assist and third brake light - Electronic immobilizer - High-performance ladder frame - Rear parking sensors - Rear fog light, ESC (stability control) switchable, TCS (traction control) switchable - 265/60 R18 M+S alloy wheels, full-size spare wheel - Trailer stability control, front tow hook, multi-collision brake & emergency braking assist, E-Call emergency system, TPMS FUNCTIONS: - Electrically assisted power steering - Infotainment system with USB-C/AUX, 8-inch display (20.3 cm), DAB+, Apple CarPlay®, Android Auto™, MirrorLink, Miracast, WiFi - Rain sensor - Cruise limiter (adjustable 60-180 km/h) - Start-stop system - 4 speakers, front doors - Windshield with infrared filter - Multifunction steering wheel - Reversing camera - Adaptive cruise control with traffic jam assist - Height and reach adjustable steering wheel - Light sensor with automatic high beam control - Multi-information display, pollen filter, 12V socket in glove compartment, remote central locking - Front electric windows, rear pop-out windows - Manual air conditioning - 100% electronically lockable differential - 14 l AdBlue tank (integrated in 76 l fuel tank) INTERIOR: - Sunglasses compartment in roof console, roof lamp with dimmer - Front reading lights, overhead console with glasses compartment - Cupholders in dashboard, centre console, and doors - Follow-me-home lighting - Dashboard storage compartment, centre console storage compartment - Seatback pocket behind front seats, front armrest with compartment - Grab handles (both A-pillars), interior lighting with delayed switch-off - Front seats: enhanced side support, height adjustable driver’s seat - Front seat heating, lumbar support, high grade fabric Additional equipment: - Colour: Islay Gray 588 (metallic) Dkjdpfxsxgku Ao Ahuew - Tow bar with ball (3,500 kg) - Rubber mats, front and rear - Upgraded to 3,500 kg GVWR - Additional air suspension, mounted between the vehicle frame and axle, enhances and supplements the standard steel springs. The high-quality air bellows compensate for differences in load, improve driving chara

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, TECHNICAL DETAILS Travel X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping Table Table dimension: Ø 500 mm Table dimension with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic Tool Changer Tool holder: HSK63 Number of tool positions: 80 Indunorm Pallet Changer Pallet size 1 for automation: 6 pcs 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc 398 mm x 398 mm Pallet size 2 for automation: 15 pcs Erowa ITS115 mm Pallet size 3 for automation: 32 pcs Erowa ITS50 mm Transfer weight incl. pallet: 300 kg Rapid Traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed Rate Feed X-axis: 32 m/min Feed Y-axis: 40 m/min Feed Z-axis: 40 m/min Feed A/C-axis: 12,000°/min (equals 33.3 rpm at max. 500 kg) Feed A/C-axis: 18,000°/min (equals 50 rpm) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,550 x 3,200 x 2,900 mm Machine weight: 16,000 kg Operating Hours (as of 30.04.2025) Power-on hours: 41,624 h Operating hours: 21,877 h Machining hours: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper band filter - Bed flushing - Electronic handwheel - 6 Parotec pallets 398 mm x 398 mm - 1 Pre-pallet Parotec for Erowa ITS 398 mm x 398 mm - Extensive Fanuc control options - Machine documentation - Marposs infrared probe - Preparation for oil mist extraction - Blum laser tool measurement - Work area flushing Dkedpfow Stpuox Ahuow - Hand rinsing gun - External coolant with 3 nozzles, 7 bar - Internal coolant 15 bar - Coolant temperature control - Internal & external air supply

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Dksdpfxexmvaqe Ahuow Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: new, Year of construction: 2024, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clamping for fixtures - High pressure cutting fluid system (80 bar) _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Machine cooling system with a air-cooled cooling unit (20 kW) SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication (GROB) GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Double disk-type tool magazine HSK-A 63 with 117 (57|60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Pallet change system for two pallets Setup station rotated manually Setup station door, manually-operated, for manual loading/unloading Pallet, 500x500 mm, grid with tapped holes Dkodpfx Aer Nbzxshuew Equipping the pallet with 4 fluid connections Scraper-type conveyor, for larger quantities, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Part clamping system in work area - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Part clamping system in setup station of pallet changer - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparations for using infrared touch probe OMP60 (RENISHAW) Rotating inspection glass for work area door Remote machine diagnostics with access control switch 12-month warranty

Condition: excellent (used), Year of construction: 2021, operating hours: 350 h, functionality: fully functional, The vacuum membrane press with a pneumatically lifted membrane is designed for heating and forming thermoformable materials such as PET felt, solid surface (CORIAN, HI-MACS, STARON, KERROCK, LG, PLEXIGLAS, and others), which can be molded into any shape after heat treatment. It is equipped with a heating system that shortens the bonding time and increases production efficiency. The TVG series vacuum presses are intended for both small and large manufacturing facilities. Manufacturing date 2021 Applications • Veneering flat and shaped elements with natural veneer (doors, frames, chairs, tables, furniture, coffins) • Laminating elements with HPL laminates in 2D format (kitchen countertops, window sills) • Pressing textured surfaces (stone veneer, decorative mats) • Manufacturing components using the sandwich method (columns, semi-circles, flat surfaces) • Wrapping car cockpit elements with leather (dashboard, gear shift lever, etc.) Dkodpfxjxqzzhe Ahuow • Forming mineral-acrylic solid surface materials such as Corian, Staron, Hi-Macs, etc. • Forming thermoplastic plastics • Forming PET feltProduct Models – TVG Special Series Construction of the Press • Steel Frame: The press is built on a robust, welded steel frame ensuring stability and durability during operation. • Vacuum Table: The worktable is equipped with a vacuum system that securely holds the material in place during the forming process. • Membrane System: A flexible, heat-resistant membrane is pneumatically lifted and lowered, allowing precise pressure distribution on the material. • Heating System: Integrated heating elements (infrared or quartz heaters) provide uniform heat distribution, essential for effective thermoforming. • Control Panel: An intuitive control panel allows easy regulation of temperature, vacuum pressure, and membrane operation. • Vacuum Pump: A high-performance vacuum pump ensures efficient air evacuation for tight membrane adherence. • Safety Features: Equipped with safety sensors and emergency stop buttons to ensure operator protection. • Optional Components: Additional options may include programmable controllers (PLC), touchscreen interfaces, or automatic cycle control for improved process automation. • Technical Specifications Parameter Working field size (length × width), mm: 3000 × 1500 Maximum height of the processed element with 500mm width in the center of the field: 550 mm Heating plate size, pneumatically lifted: 2000 × 1000 Silicone membrane 700%, max temperature: 230°C Heater power, kW: 6 kW + hot air circulation Pump power, kW: 1.25 Vacuum pump capacity, m³/h: 40 Working vacuum, kg/cm² (bar): – 0.85 Protection level: IP53 Noise level, dB: < 70 Voltage, V: 3P 400 50Hz Machine dimensions (mm): – Length 3500 – Width 1800 – Height (working) 2200 (3100) Weight, kg: 1250 The TVG Special models are equipped with a pneumatically lifted membrane, ensuring high precision and repeatability of forming processes. The reinforced structure and advanced control system guarantee reliable operation in continuous production environments.