Used Impregnating for sale (72)

Condition: new, 10000 kg length 6000 mm width 2000 mm loading area height 650 mm Heavy-duty trailers - industrial trailers, available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering Djdpfxet Dqv Uo Afnskh - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø415mm, total width 200mm and ball bearings.

Condition: new, 16000 kg length 6000 mm width 2500 mm loading area height 700 mm Heavy-duty trailer - industrial trailer - Made in Germany - Available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Dkodpfjhrrp Rsx Afneh Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings.

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Dodoxrpmzopfx Afnekh Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Dkedpex T Aqfjfx Afnjh Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Condition: used, mileage: 78,253 km, power: 75 kW (101.97 HP), first registration: 04/2020, fuel type: diesel, overall weight: 2,830 kg, next inspection (TÜV): 11/2026, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 2, total height: 1,920 mm, loading space length: 2,800 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2020, Equipment: air conditioning, central locking, navigation system, soot filter, Citroen Jumpy L3 H1 Long Version TÜV until 11/2026 Rear view camera PDC (parking distance control) Air conditioning Cruise control Navigation system Cargo area dimensions Length: 2800 mm Width: 1600 mm Height: 1300 mm Special equipment: Electrically adjustable, heated and folding exterior mirrors Increased payload Spare wheel with road tires Front side airbags Additional equipment: Driver and passenger airbags RD 6 audio system (radio/CD player with MP3 capability), 6 speakers Single passenger seat Djdpfox Sfnkjx Afnokh On-board computer Electric package Driver assistance system: Hill Start Assist Rubber mats for passenger compartment and cargo area Rear wing doors without glazing Body/chassis: panel van Bulkhead without window Adjustable steering column (steering wheel) Engine 1.5 L - 75 kW Blue HDI FAP Radio preparation, 2 speakers Wheelbase 2925 mm Low emission according to Euro 6d-TEMP standard Right-side sliding door SCR system (AdBlue technology) Color-impregnated side protection moldings Seat upholstery: fabric/artificial leather 16" steel wheels (7x16) Start/stop system 12V socket in center console Vehicle is sold to businesses, traders, or for export only. Delivery of the vehicle within Germany is available for an additional fee. Check our stock of more than 150 immediately available transporters and schedule a test drive today. We look forward to your visit! * TEST DRIVE * Your trust is important to us. To ensure you feel confident and secure with your vehicle purchase, we always offer you a non-binding test drive. * TRADE-IN * We are happy to provide you with a fair offer for your current vehicle. * FINANCING OR LEASING * Financing or leasing is possible with low monthly rates, even without a down payment. * Together, we will find an affordable, customized financing offer for you. * HANDOVER INSPECTION * A delivery inspection is naturally part of our premium customer service. * EXPORT PROCESSING * Available to EU and third countries * Preparation of all necessary documents, export paperwork, and license plate services * REGISTRATION * Available for local customers * Temporary license plates * USED VEHICLE WARRANTY * VEHICLE PURCHASE * We buy any transporter, truck, construction machinery, or forklift. All details are provided without guarantee. Errors, input mistakes, and prior sales excepted. The information in adverts, online platforms, price tags, and images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability for errors resulting from typing or data transmission. Listed equipment is to be checked separately if necessary.

Condition: used, mileage: 78,253 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2020, next inspection (TÜV): 11/2026, emission class: euro6, color: grey, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Citroen Jumpy L3 H1 Long Version TÜV until 11/2026 Rear view camera PDC (parking distance control) Air conditioning Cruise control Navigation system Cargo area dimensions Length: 2800 mm Width: 1600 mm Height: 1300 mm Special equipment: Electrically adjustable, heated and folding exterior mirrors Increased payload Spare wheel with road tires Front side airbags Additional equipment: Driver and passenger airbags RD 6 audio system (radio/CD player with MP3 capability), 6 speakers Single passenger seat On-board computer Electric package Driver assistance system: Hill Start Assist Rubber mats for passenger compartment and cargo area Rear wing doors without glazing Body/chassis: panel van Dodpfxox Sfuke Afnekh Bulkhead without window Adjustable steering column (steering wheel) Engine 1.5 L - 75 kW Blue HDI FAP Radio preparation, 2 speakers Wheelbase 2925 mm Low emission according to Euro 6d-TEMP standard Right-side sliding door SCR system (AdBlue technology) Color-impregnated side protection moldings Seat upholstery: fabric/artificial leather 16" steel wheels (7x16) Start/stop system 12V socket in center console Vehicle is sold to businesses, traders, or for export only. Delivery of the vehicle within Germany is available for an additional fee. Check our stock of more than 150 immediately available transporters and schedule a test drive today. We look forward to your visit! * TEST DRIVE * Your trust is important to us. To ensure you feel confident and secure with your vehicle purchase, we always offer you a non-binding test drive. * TRADE-IN * We are happy to provide you with a fair offer for your current vehicle. * FINANCING OR LEASING * Financing or leasing is possible with low monthly rates, even without a down payment. * Together, we will find an affordable, customized financing offer for you. * HANDOVER INSPECTION * A delivery inspection is naturally part of our premium customer service. * EXPORT PROCESSING * Available to EU and third countries * Preparation of all necessary documents, export paperwork, and license plate services * REGISTRATION * Available for local customers * Temporary license plates * USED VEHICLE WARRANTY * VEHICLE PURCHASE * We buy any transporter, truck, construction machinery, or forklift. All details are provided without guarantee. Errors, input mistakes, and prior sales excepted. The information in adverts, online platforms, price tags, and images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability for errors resulting from typing or data transmission. Listed equipment is to be checked separately if necessary.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Stergaz autoclave Year of production: 2007 Technical condition: very good Autoclave + two tanks Technical data: - design pressure: 10 bar - design temperature: 40C - minimum / maximum temperature: 0/40 degrees Celsius - welded joint coefficient z = 0.7 - capacity: V= 84 800 L - material St 41K Dksdjvu Ibyepfx Afnoh - casing thickness: 24mm - crown 26mm - bottom thickness: 26mm - vacuum: 90% - medium: water + impregnant

Condition: new, Year of construction: 2025, functionality: fully functional, suction capacity: 1,100 m³/h, Welding Fume Extraction, Dust Extraction, Self-Cleaning, Pneumatic with Vacuum Filter. This unit is designed for the extraction and purification of dry dust generated during welding, grinding, polishing, casting, and cutting of metals and plastics. It features a three-stage filtration system with integrated primary filter element regeneration. Contaminated air passes through a metal pre-filter (spark arrestor), a main filter cartridge, and a discharge filter made from activated carbon-impregnated fleece. The regeneration of the main filter element, which utilizes compressed air to clean the filter cartridge from accumulated contaminants, is equipped with its own 10-liter compressed air tank. The unit is recommended for applications requiring continuous extraction and filtration of airborne pollutants. Extraction arms with a reach of 3 or 4 meters are recommended as accessories. The illustrated EC model is characterized by the following features: - Fan with brushless EC motor and 0.78 kW inverter, sound-insulated - Advanced next-generation EC motor design – ensures energy efficiency, precise speed control, and quiet operation - Reliable induction motor – robust and reliable solution that guarantees high performance and trouble-free operation even under demanding conditions Maximum Capacity: 1,100 m³/h Automatic filter cartridge cleaning Self-supporting extraction arm (L = 3.0 m, d = 160 mm, hood diameter 315 mm) Three filtration stages: • Coarse pre-filter (30% metal content, G2) • Main cartridge filter with 99% separation efficiency for particles ≥ 0.5 µm • Coarse final filter (70% activated carbon, G4) PTFE membrane filter (filter class F9) Coarse dust container below pre-filter Grid and dust container below main filter Welded steel enclosure with powder coating Noise level: 64 dB(A) Various configurations available to meet customer requirements. Applications: - Welding shops - Metalworking industry - Grinding and polishing stations Dkjdpfx Afenabuzsnsh - Plastics processing and machining This unit is ideal for environments that require constant and effective filtration of dry dust from the air. Made in Poland. The listed price applies to the model shown. Machine warranty: 12 months

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Dkoderhilxepfx Afnoh Special price €6,500

Year of construction: 1993, condition: ready for operation (used), A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible. Dkjdpfx Aex S Rbvefnjh

Condition: new, EVA Hotmelt Without Filler 280.30/31 Application Examples: Edge Banding For bonding thermoplastic edge bands (such as ABS, PP, PVC), resin-impregnated decorative paper, veneer edge bands (with or without nonwoven backing), and solid wood edges. As a general rule, the bonding properties and the substrates’ surfaces to be glued (including back-side primers or other surface treatments) must be checked on an application-specific basis prior to use. Processing Instructions: Automatic feed systems can be used for processing the adhesive granulate. The ambient temperature should not exceed 30°C. Depending on formulation, different types of hotmelt adhesives may be incompatible with each other. Therefore, we recommend thoroughly cleaning application equipment when changing products. Further information is available upon request. Processing characteristics may vary depending on the application technology used and variations in feed speed, which can affect the bonding process. Customer trials are required! Typical Technical Data: Djdsx Sqnvopfx Afnekh Processing temperature [°C]: 180 – 200 Feed rate [m/min]: 10 – 40 Appearance: Terminal digit 0 = yellow opaque Terminal digit 1 = white Density at 20°C [g/cm³]: approx. 1.03 ± 0.03 Softening range [°C]: approx. 90 ± 5 (Kofler heating bench) Viscosity at 190°C [mPas]: approx. 66,000 ± 10,000 Heat resistance [°C]: approx. 80 ± 5 Open time at 190°C [s]*: approx. 6 ± 2 Setting time: not applicable * measured on a 200 µm film Technical data determined according to Jowat test methods

Condition: used, Year of construction: 1992, The CO2 target value is entered on the digital controller, causing the CO2 metering valve to open accordingly. The CO2 is introduced into the product stream via an injector and then dissolved and bound in the saturation section. The amount of CO2 in the beverage is monitored by a CO2 analyser and computer. The actual value is automatically compared with the target value and corrected via the CO2 valve if necessary. A CO2 recorder records the actual value. Additional title: impregnation plant Capacity: 20000 l/h Final CO2 content value (operating value) up to: 7 g/l Material: stainless steel Features: CO2 injection; settling section; control cabinet with user interface for CO2 control and CO2 recorder; various pipes, valves, measurement technology Dksdpfoxzqufox Afneh

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Base construction: mounted on stainless steel frame Djdpfxsxzqt Ie Afnskh Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long Dsdpfxewx Dcyj Afnokh * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: used, Year of construction: 2020, carrying capacity 5000 kg length 5000 mm width 2000 mm height 500 mm weight 1250 kg length in total ca. 6300 mm transport measurements ca. 5900x2000x500 mm Like new, only used 3 times Dkjdpfx Afew I Hqwjnjh Heavy-duty trailer with double swivel steering - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm - Tire dimensions approx. 425 x 260 mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: IMBDS63-52-10-45-2/SP/DC/SB, workpiece weight (max.): 120 kg, working height: 2,850 mm, power: 35 kW (47.59 HP), air demand: 24,000 m³/h, compressed air connection: 6 bar, The existing window coating line was in full operation until December 19, 2025. The system is currently still connected to the electrical supply network but will be replaced by a new robotic coating system over the turn of the year. The objective is to find a suitable subsequent user who will professionally dismantle and remove the complete system on their own responsibility at the beginning of the coming year. System Concept Description Loading and unloading of traverses with window frames and sashes takes place via a lifting/lowering station, which allows for ergonomic and process-safe feeding of the system. Impregnation and priming of the workpieces is carried out in a vertical flooding booth. The coating application is performed using the flooding process via vertically arranged coating nozzles. This is followed by a drip-off and drying zone, where the traverses are guided in an inclined position. Dsdpjx Npzcefx Afnjkh The first drying tunnel has a buffer capacity of approx. 40 traverses. Drying is achieved by means of warm air generated from a hot water system with a supply temperature of approx. 85°C. A switching unit enables workpieces to be routed either to a second impregnation/priming stage or directly to the subsequent coating section, as required. The coating section consists of a lifting stand with integrated electrostatic application (E-Statik). Coating is performed on one side only, supplemented by an automated turning unit, allowing workpieces to be returned to the spray system for a repeat coating pass. The second drying tunnel enables buffering of approx. 50 traverses. Here as well, drying is by warm air supplied by a hot water system at approx. 85°C. A buffer section after the second drying tunnel with a capacity of about 25 traverses serves as a transfer area to the unloading station.

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm Dkjdpfxofrzvwj Afnoh - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 35000 kg length 7000 mm width 2500 mm height 600 mm lenkbar lenkbar size of tyres 8 Stk. 450 x 300 mm weight of the machine ca. 3,9 t dimensions of the machine ca. 8,9 x 2,5 x 0,6 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar Dkedpfx Aefrzv Tofnsh - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 10000 kg length 5000 mm width 2000 mm height 725 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 1,2 t dimensions 6,7 x 2,0 x 0,6 m Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Dkjdpfsfrzvasx Afnjh Would you like other loads and dimensions? Please contact us.

Condition: new, 20000 kg length 8000 mm width 2450 mm height 850 mm lenkbar lenkbar size of tyres 540 x 300 weight of the machine ca. 2,95 t dimensions of the machine ca. 7,6 x 2,5 x 0,85 mm Dksdpfx Ajfrzvtjfneh Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - robust, low maintenance - with reversible drawbar, length 1320mm - 50mm impregnated wooden support. - Standard paint changes. On request in their Ral color. Would you like other loads and dimensions? Please contact us. Images are vehicles with special-drawbar height

Condition: new, 30000 kg length 7000 mm width 2450 mm height 800 mm Dkodpfxoqux S So Afnsh lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 15000 kg length 6000 mm width 2450 mm height 625 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 2,6 t dimensions of the machine ca. 7,2 x 2,45 x 0,625 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1200mm Dsdovn Uxfopfx Afnskh - impregnated wooden support. Would you like other loads and dimensions? Please contact us.

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar Dedpfxofrzvzs Afnjkh lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 30000 kg length 9000 mm width 2500 mm height 790 mm lenkbar lenkbar Dkodpfx Afefrzv Nsnsh size of tyres 425 x 260 / 2-fach weight of the machine ca. 4,2 t dimensions of the machine ca. 10,9 x 2,5 x 0,8 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1320mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us.

Condition: new, 150000 kg length 12000 mm width 5000 mm Dedpfxeftd Udj Afnjkh height 1400 mm lenkbar lenkbar size of tyres 645 x 250 mm dimensions 14,4 x 5,0 x 1,4 m Heavy duty trailer with - Double steering - small turning circle - very robust, therefore low maintenance - Reversible drawbar - 50mm impregnated wooden support. (Picture is with steel pad) - Standard paint changes. On request in their Ral color. Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockers Would you like other loads and dimensions? Please contact us.