Used Impregnating for sale (64)

Condition: new, We manufacture impregnation systems according to your wishes Image is an example We would be happy to make you an offer Njdpfx Aovw S Ipsa Esdf

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV Njdpfx Aerhilxoa Esdf • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: used, impregnation container used, good condition Ndjdsvwgd Eopfx Aa Esf container size l x w x H ca. mm 750 x 750 x 1130 with cover membrane pump air operated required space ca. l x w x h mm 1200 x 800 x 1400 weight ca. 200 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, machine/vehicle number: 39500, empty load weight: 8,250 kg, maximum load weight: 31,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/1995, tire size: 235/75 r17,5 zwilling, Year of construction: 1995, Further information Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation! 24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished Njdpfji Rixgjx Aa Esdf

Condition: excellent (used), Year of construction: 1989, operating hours: 1 h, machine/vehicle number: 8928, Hello I have for sale a pressure tank for impregnation AUTOCLAW. The machine in very good condition fully operational. The machine includes a tank, pumps and carts that transport the goods to the tank. The length of the tank itself is about 15m, the inner diameter of the tank is 160cm, and the width of the cart transporting the goods is 100cm. The machine is roofed. Disassembly of the machine on the customer's side. We invite you to purchase. More information by phone. The price of the machine is the price for export. Ndsdpfeud Sbkox Aa Eef

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Stergaz autoclave Njdpfx Aajvu Ibys Ejdf Year of production: 2007 Technical condition: very good Autoclave + two tanks Technical data: - design pressure: 10 bar - design temperature: 40C - minimum / maximum temperature: 0/40 degrees Celsius - welded joint coefficient z = 0.7 - capacity: V= 84 800 L - material St 41K - casing thickness: 24mm - crown 26mm - bottom thickness: 26mm - vacuum: 90% - medium: water + impregnant

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Ndodporhidmefx Aa Eef Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: new, A2C develops, manufactures, installs, and maintains a wide range of effective, reliable, and efficient solutions for all companies in the wood processing industry. Our qualified and experienced team offers you the optimal equipment for your projects. A2C offers equipment for four application areas: – Wood processing (e.g. impregnation tanks), – Robotics, – Logistics, – Handling (loading containers) Ndjdpfewnqn Isx Aa Eef Please feel free to contact us.

Condition: excellent (used), Set of 2 autoclaves for wood impregnation. Internal diameter: 1950 mm Ndsdpfxow S N Awe Aa Eef Total length: 13,500 mm + 3 tanks for impregnant

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, Sarmax Apache 15 impregnation line year 2016 (USED working by the Customer from whom it was collected) Complete with loading and unloading roller conveyors Ndjdpfx Aasvy Enhj Eef

Year of construction: 2002, condition: excellent (used), complete autoclav for impregnation of softwood. Length 18m. Including lories, no rails Ndodpoiyw Rbjfx Aa Eef

Condition: used, Pressure vessel Diameter 1 .400 mm Length 4.100 mm Volume: 6.500 litres of preservative Wood volume: app. 3,2 m3 per charge Pressure: 0 to 3 bar (abs) Material: 10 mm HII boiler plate/P265GH Wood pack size: max 1 ,00 m x 0,80 m x 4,20 m Door: 1 rapid closure door Complete with internal rails and an anti-float sy stem for the trolley s Storage tank placed next to the autoclave Volume: 10.000 litres of preservative Diameter: 1 .600 mm Ndsdpfxjtnmz Nj Aa Eef Length: 5.350 mm Material: 5 mm steel plate 1 .0037 acc. to EN10025

Condition: excellent (used), IwoTech Wood Treatment Autoclave, 161 m³, 12 bar For sale: fully operational wood impregnation autoclave manufactured by the renowned company IwoTech A/S. This large-capacity unit is ideally suited for professional treatment of significant volumes of timber, making it an attractive solution for sawmills, construction companies, and manufacturers of outdoor landscape elements. Key technical parameters: Manufacturer: The Danish Treting Co Ltd, IwoTech A/S, DK-7330 Brande Serial number: 10838 Year of manufacture: 1996 (reconstruction date: 26.08.1996) Volume: 161,000 liters (161 m³) Design pressure: Internal: 12 bar External: -1 bar (vacuum) Permissible operating pressure: -0.95 to 10 bar Design temperature: 50°C Dimensions: Internal diameter: 3,000 mm (3 m) Total length: 21,425 mm (21.425 m) Material: HSB 40 SS steel Weld factor: Z = 0.8 Pressure test (hydrostatic): 16 bar Hydrostatic test date: 26.08.1996 Application: Pressure-vacuum impregnation of wood. Additional equipment: Feed valve: 1 pcs Discharge valve: 1 pcs Drain valve: 1 pcs Two impregnant storage tanks Temperature measuring device: 1 pcs Ndsdew S Nz Topfx Aa Esf Pressure measuring device: 1 pcs Condition: The autoclave is in good technical condition and ready for operation. Supplied with full documentation, including certificates and technical drawings confirming its parameters and compliance with standards (EN287-1). This is a reliable unit that will provide many more years of service. Set includes: - Complete autoclave - 2 impregnant storage tanks - Full technical documentation, drawings, and certificates (including hydrostatic test report). Please contact for more information or to arrange an inspection.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, SARMAX APACHE 15 IMPREGNATING MACHINE WITH 8 BRUSHES. In good condition, fully functional. Height and width are motorized. Ndsdjw E Evzjpfx Aa Esf