Heavy-duty trailers

WMT D05/3,0 x 1,6

Condition: used, 9 St. ca. 750 x710x1020 mm weight 180 kg Colour 6011 RAL Large drawer usable space ...x... mm Full extension drawer runners (VA) 100% 2 drawers with internal height 30 mm 2 drawers with internal height 55 mm, 2 drawers with internal height 80 mm, 2 drawers with internal height 130 mm Ball bearing drawer runners Individual pull-out stop Individual locking possible for each drawer TÜV GS tested Drawers flush with cabinet, recessed handles Nsdpfx Akoy A Tb Tsislh

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Nodpfsy Rk Igox Akiolh Technical Data - Manufacturer: ATS Wibbing GmbH - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm - Control System: Siemens S7-1500 - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: good (used), We can sell the unit as is or fully refurbished. Please check out our other listings as well. Nsdpsn Uwc Esfx Akiolh

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. Nedpfszt Ai Ejx Akislh optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, mileage: 1,001 km, power: 35 kW (47.59 HP), gearing type: automatic, fuel type: diesel, color: red, empty load weight: 4,675 kg, lifting height: 4,070,000 mm, axle configuration: 4x4, number of seats: 1, first registration: 04/2019, Year of construction: 2019, operating hours: 1,733 h, driver cabin: other, wheelbase: 1,950 mm, maximum speed: 20 km/h, Equipment: additional headlights, all wheel drive, onboard computer, pallet forks, standard shovel, Vehicle location: Bovenden, 1x air seat, raised exhaust, differential lock, work lights, rotating beacon Wheelbase: 1950 mm Water-cooled Kubota 4-cylinder engine, hydrostatic drive, forward/reverse speed 0-20 km/h! Bucket dumping height approx. 2605 mm! Maximum lifting height approx. 4070 mm! Overall length approx. 5195 mm! Nledpfx Akey Ipnyoioh Overall height approx. 2480 mm! Overall width approx. 1680 mm! Approx. 1733 operating hours! Pallet fork available for an additional charge! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .

Condition: new, number 96 Positionen weight 600 kg condition neu 28 mm Special 31-piece set, 28mm system, consisting of: Njdpfxjygxz Sj Akislh 1x Tool trolley 10x Locking pins 10x Ball lock pins 3x Professional screw clamps, 300 x 150mm 3x Professional screw clamps, 300 x 200mm 2x Professional pipe clamps, 180° 2x Professional pipe clamps, 45° Material: Burnished quality steel ATTENTION!!! Tools are designed for 25mm thick tabletops.

Condition: excellent (used), GFK transport box Bundeswehr container pressure-tight & waterproof, 80x60x50cm. From depot stocks of the Bundeswehr we can offer you these great boxes ! This extremely robust GFK transport box from Bundeswehr stock is not only perfectly protected against dust and water ingress, it also has a pressure equalization valve and a moisture indicator ! Through this special equipment, all kinds of goods can be stored in almost all regions of the world, because both the humidity and a fluctuating pressure can be perfectly monitored and balanced. The containers perfectly protect the packaged goods against shock and impact, against humidity and moisture and in alternating climates and extreme climatic effects ! Nsdpommfa Hefx Akijlh The pictures show the box without and with interior made of solid foam - this is usually supplied, but can be easily removed. We can not guarantee that it is present in every box, so please inform us if you buy in any case can not do without the interior ! The price is always for a complete box with lid ! Dimensions: 800mm x 600mm x 500mm Capacity 240 liters Weight: 27 kg empty, 30 kg with interior made of solid foam material The containers are in a visually and technically all around good condition. Color changes, transport traces and slight adhesive residues from shipping bags, etc. are present, but do not limit the usability in any way. We have hundreds of boxes also in other sizes in stock, just ask! Product properties: - pressure- and vapor-tight (air- and watertight) - air-loadable according to LTR 8145 - provided with corrosion-resistant tension locks and - resetting carrying handles - stackable with all sizes due to the dimpled grid system The sale is exclusively to tradesmen, you will of course receive an invoice with VAT. Private buyers have the opportunity to purchase the boxes "on behalf of customers", a direct commercial sale to private individuals is expressly not ! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, color: other, first registration: 07/2010, Year of construction: 2010 Serial number: no template We have a stock of >100 axles. Nlsdjwx Ixljpfx Akish Please contact us if you can't find what you are looking for.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 55 kW (74.78 HP), • 160 mm cutting height • 600 mm cutting width • 70 mm saw shaft • 1 set of spacer rings according to customer requirements • 5–30 m/min infinitely variable feed • 2.2 kW feed motor • 4 driven lower rollers • 2 upper driven rollers • 3200 kg weight Nlsdpfjxqd Nnox Akish • 55 kW saw motor • Complete electrical system, with control cabinet and control panel • CE-compliant design • Machine painted in RAL 6011 • Protective devices painted in RAL 7032

Condition: good (used), Saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade Nlodpfx Akowrrlcjijh -Saw blade: Ø 865 x 6 mm -Inside: Ø: 80 mm -Bolt circle: Ø 160 x 30 mm -Number of teeth: see photo -Weight: 6 kg