Used Immersion Tub for sale (817)

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7385, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Transfluid, controller model: IPU 20, pipe diameter (max.): 648 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 180 °, bending radius (max.): 125 mm, bending radius (min.): 50 mm, working width: 6,000 mm, mandrel length: 5,500 mm, number of axes: 3, working height: 1,300 mm, table length: 7,000 mm, table width: 900 mm, table height: 1,300 mm, overall weight: 1,000 kg, total length: 7,000 mm, total width: 900 mm, total height: 1,300 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 1,320 l, operating pressure: 200 bar, Equipment: documentation/manual, emergency stop, Bending software requires a new update. Bending mandrels are available, bending tools are not included. Fedpfx Ajxcxupsikopp

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 total power requirement 4.0 kW weight 3030 kg Fodpjxabumefx Aikjpp range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Fpodpsxab T Asfx Aikop Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 1,075 mm, total length: 1,942 mm, total width: 820 mm, overall weight: 175 kg, input current: 32 A, power: 8.6 kW (11.69 HP), New device with proofing cabinet 12 months warranty Benefits: + Excellent baking quality at a top price-performance ratio + Robust, durable stainless steel construction + Manual thermostat + Electrically powered basket lifting & lowering via push buttons + With drip table, attachable on the left (optionally right) of the unit, foldable + Equipped with foldable steam lid + Easy cleaning & maintenance + Incl. 1 six-row turn-over basket for easy turning of Berliner pastries + Incl. 1 proofing trolley with 10 tilting trays Optional accessories, available at extra charge upon request: - Open immersion basket, e.g. for donuts, cheese balls, apple pancakes, etc. - 5-row turn-over basket for larger dough pieces - Proofing trolley with 8 or 9 tilting trays (greater spacing between trays) Technical data: - Capacity: max. approx. 48 pieces (product-dependent) - Dimensions: --- Footprint: 1050 x 820 mm (WxD) Fedpfx Ajw Sk D Aoikopp --- Overall: 1942 x 820 x 1075 mm (WxDxH) - Power: 8.6 kW - Connection data: 400 V - 3Ph - 50Hz - 32A CEE plug - Net weight: 175 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 1,075 mm, total length: 2,315 mm, total width: 820 mm, overall weight: 220 kg, input current: 32 A, power: 10.4 kW (14.14 HP), New device with proofing cabinet 12 months warranty Benefits: + excellent baking quality at a top price-performance ratio + robust, durable stainless steel construction + manual thermostat + electric lifting & lowering of the basket via push buttons + with drip tray, left (optionally right) of the device, foldable + equipped with foldable steam lid + easy cleaning & maintenance + incl. 1 reversible basket, 6-row, for easy turning of Berliners + incl. 1 proofing trolley equipped with 10 tilting trays Special accessories, available at extra cost upon request: - open immersion basket, for e.g. donuts, curd balls, apple pancakes, etc. - 5-row reversible basket, for larger dough pieces - proofing trolley with 8 or 9 tilting trays (greater spacing between trays) Technical data: Fpsdpjw Sk H Refx Aikjp - capacity: max. approx. 60 pieces (depending on product) - dimensions: --- footprint: 1243 x 820 mm (W x D) --- overall: 2315 x 820 x 1075 mm (W x D x H) - output: 10.4 kW - connection values: 400 V - 3Ph - 50Hz - 32A CEE plug - net weight: 220 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 1,075 mm, total length: 1,560 mm, total width: 820 mm, overall weight: 105 kg, input current: 32 A, power: 7.4 kW (10.06 HP), New unit 12 months warranty Advantages: + outstanding baking quality at a top price-performance ratio + robust, durable stainless steel construction + operation via touch panel, Siemens control system + complete baking process with programmable baking times + automatic lifting & lowering of the basket and steam lid + automatic turning and emptying of Berliners + includes drip table, foldable on the left side of the unit + equipped with automatic steam lid + easy cleaning & maintenance + incl. 1 six-row turning basket for automatic turning of Berliners + incl. 1 proofing trolley fitted with 10 tilting trays Special accessories available at extra charge upon request: - open immersion basket, for e.g. donuts, cottage cheese balls, apple pancakes, etc. - 5-row turning basket for larger dough pieces - proofing trolley with 8 or 9 tilting trays (greater spacing between trays) Technical data: - Capacity: max. approx. 36 pieces* (depending on product) - Dimensions: --- Footprint: 860 x 820 mm (W x D) --- Overall: 1560 x 820 x 1075 mm (W x D x H) - Power: 7.4 kW Fpsdpfxjw Sk T Rs Aikjp - Electrical specs: 400 V - 3Ph - 50Hz - 32A CEE plug - Net weight: 105 kg * Images show the 60er model with proofing cabinet!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: ET.200.01.2025, overall weight: 134 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder + EC-120 Welding Head Ex-Demo (-40%) DESCRIPTION: MACHINE CONDITION: We offer for immediate delivery a Metalself orbital TIG welding system consisting of an ET-200 power source and an EC-120 closed-chamber welding head. The machine (manufactured in 2025) is in LIKE-NEW condition: it has never been used in production and was used exclusively as an internal demonstration unit. Due to its "Ex-Demo" status, the entire system is offered with an exceptional 40% discount on the list price. SYSTEM OVERVIEW: The system automates TIG welding on thin-walled pipes, performing a complete 360° rotation around the joint. It is the ultimate solution for industrial piping, fluid, food, and pharmaceutical systems, ensuring perfect repeatability, impeccable aesthetics, and weld seams free of defects. POWER SOURCE SPECIFICATIONS (ET-200): -Technology: Microprocessor-controlled inverter for millimeter-precise arc control. -Welding current: 5 ~ 200 A. Modes: Direct Current (DC) and Pulsed, ideal for thermal control on stainless steel and titanium. -Interface: Intuitive touch screen with an "Auto Prog" system that automatically generates parameters by simply entering the tube diameter and thickness. -Capacity to store 200 programs. Cooling: Integrated water circulation system. Quality Control: Integrated thermal printer on the machine and USB port for exporting welding reports. -Power supply: 220VAC ±10% - 50/60 Hz (Consumption 4.5 KVA). -Dimensions and Weight: 500 x 380 x 300 mm; 28 kg. WELDING HEAD SPECIFICATIONS (EC-120): -Type: Orbital welding head with closed chamber. -Operating diameter range: from Ø 19 mm to Ø 114.3 mm. -Maximum penetration thickness: ≤ 3 mm. -Shielding gas: Argon. -Cooling: Water-cooled. -Welding head dimensions: 540 x 195 x 54 mm. -Welding head weight: 6.5 kg. THE SUPPLY INCLUDES: -ET-200 power source and EC-120 welding head. -Dedicated trolley for easy and safe movement of the system in the workshop. -Power cables, control connections, ground clamp, and hydraulic/gas tubing. -CE Declaration of Conformity. -Complete user and maintenance manual (including parts list and programming instructions). SALE CONDITIONS: Fsdpfxjzw Uh Ue Aikjpp -Price: -40% compared to the new list price. -Delivery: Ex Works (EXW) in Settimo Torinese. -Availability: Immediate. The machine can be viewed at our facility and is available for any testing or practical demonstration.

Condition: excellent (used), FENCO Multitubular Aseptic Sterilizer – Stainless Steel FENCO multitubular aseptic sterilizer, designed for the continuous thermal treatment and sterilization of liquid, semi-liquid, and viscous food products in aseptic processing industrial lines. The equipment uses a tubular/multitubular heat exchange system that allows for the indirect and controlled execution of the different phases of product heating and cooling. This technology is especially suitable for processes where precise thermal treatment is required before storage or aseptic filling. Its configuration with multiple tubular sections in stainless steel provides a large exchange surface and allows for the integration of different thermal stages within a single continuous process installation. MAIN FEATURES -Manufacturer: FENCO -Type: Multitubular aseptic sterilizer -Technology: Tubular/multitubular heat exchange -Continuous thermal treatment -Indirect product heating -Heating and cooling sections -Multiple heat exchange modules -Stainless steel construction -Sanitary product connections -Integrated piping and valve system -Process pumps -Self-supporting industrial structure -Designed for aseptic processes -Integrable into complete aseptic processing and filling lines PROCESS The FENCO aseptic sterilizer is designed to circulate the product continuously through different heat exchange sections. Depending on the process configuration, the product can pass through preheating, heating, sterilization, holding, and cooling stages, controlling the necessary conditions before being transferred to a storage tank or aseptic filling system. Indirect exchange allows the treatment to be carried out while keeping the product separate from the heat transfer fluid. It can be integrated with: Preparation tanks Sanitary pumps Homogenizers Deaerators CIP systems Aseptic tanks Aseptic fillers Complete UHT/aseptic lines APPLICATIONS Especially suitable for the fruit and vegetable, tomato, juice, puree, concentrate, sauce, and other pumpable food industries that require continuous sterilization before aseptic packaging. Fedpozw E R Tofx Aikspp Depending on its configuration, it can be used with fruit juices, pulps, and purees, concentrates, tomato products, sauces, and other liquid or viscous products. The combination of FENCO technology, multitubular exchange, and sanitary stainless steel construction provides an industrial solution for continuous sterilization and aseptic production processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 2015, total width: 1,700 mm, total length: 4,700 mm, total height: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this Novatec PLURITANK 550 ultrasonic cleaning system in good condition, manufactured in 2015. 1) Overall dimensions of the system: 4700 x 1700 x 1500 (h) mm 2) Total installed electrical power: 53 kW 3) Supply voltage: 400V - 3 phases + N + PE - 0 Hz Fsdpfszy R Rkjx Aikjpp 4) Dimensions of the tanks: • Tank 1: “Ultrasonic cleaning tank in hot aqueous detergent solution”  1450 x 1150 x 1500 (h) mm (capacity 620 L) • Tank 2: “Hot hydrokinetic rinsing tank for immersion in tap water with passivating agent”  1200 x 1150 x 1500 (h) mm (capacity 580 L) • Tank 3: “Hot air recirculation drying oven”  1200 x 1150 x 1500 (h) mm (capacity 580 L). If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1250 mm -Wall thickness: 18 mm Fpodpszfag Sjfx Aikjp -Length: 920 mm -Weight: 519 kg/m

Condition: excellent (used), TETRA PAK SPIRAFLO – Aseptic Multitubular Heat Exchanger Aseptic multitubular heat exchanger TETRA PAK SPIRAFLO, designed for the continuous thermal treatment of liquid and viscous food products in industrial process lines. The Tetra Spiraflo system uses tubular heat exchange technology to perform indirect heating and cooling operations, keeping the product and the heating fluid separate. Its multitubular configuration makes it particularly suitable for pasteurization, UHT treatment, aseptic processing, heating, cooling, and heat recovery processes. MAIN FEATURES -Manufacturer: TETRA PAK -Series: Tetra Spiraflo -Type: Aseptic multitubular heat exchanger -Technology: tubular/multitubular heat exchange -Hygienic construction in stainless steel -Continuous thermal treatment -Indirect heating and cooling of the product -Multiple heat exchange sections -Sanitary connections -Suitable for pasteurization and UHT processes -Integrable into aseptic processing lines -Designed for continuous industrial use APPLICATIONS Depending on the configuration of the installation, the Tetra Pak Spiraflo can be used for: Preheating and heating Pasteurization UHT treatment Aseptic processing Cooling Heat recovery Fpjdpfszm U Nqsx Aikep Thermal conditioning prior to filling It can be integrated with process tanks, pumps, homogenizers, deaerators, holding tubes, aseptic tanks, and filling systems. Particularly suitable for the dairy, beverage, juice, processed fruit, sauce, and liquid food industries, and depending on its configuration, can be used with milk, juices, beverages, purees, concentrates, sauces, and other products that require controlled thermal treatment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, KABBERT Körnerpresse – Duct Corner Insertion & Press Machine A high-quality, German-engineered press machine specifically designed for the fast and secure locking of metal corner pieces into rectangular duct flanges. The Kabbert Körnerpresse replaces manual hammering, using a powerful mechanical press mechanism to lock the corner elements tightly into the profile joints for an airtight and rigid connection. Specifications • Manufacturer: Kabbert GmbH (Germany) • Type / Model: Körnerpresse (Flange Corner Press) • Machine No. (Masch. Nr.): 310616 Fedpjzbqk Ujfx Aikspp • Application: Inserting, pressing, and locking corner pieces into rectangular ventilation duct profiles. • Maximum Sheet Thickness (Blechstärke): max. 1.5 mm • Machine Weight (Gewicht): 50 kg Key Features & Components • Precise Corner Locking: Specifically designed to press and secure metal corners at the joints of profile flanges, ensuring a perfectly aligned and rigid duct frame. • High-Speed Assembly: Eliminates intensive manual labor and hammering, significantly speeding up the final assembly of rectangular duct sections. • Preserves Galvanized Coating: The cold-pressing technology forms a strong mechanical lock without scratching, burning, or damaging the zinc layer, maintaining full corrosion resistance. • Compact & Portable: Weighing only 50 kg, the machine is highly space-saving, easy to relocate, and fits seamlessly into any workshop layout. • Heavy-Duty German Quality: Built to industrial standards for reliable, repeatable, and trouble-free operation under daily workshop loads. Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. Fsdpfxjzg Dlbe Aikopp 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Fpodpfx Aijzzk Dmjkjp Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: new, ✅ Professional parts cleaning machine RESY – buy now at a great price! Are you looking for a powerful and robust parts cleaning machine for larger batches? Then our RESY series is just the thing for you! All models are made entirely of stainless steel – including the special pump. This new development offers the highest quality and durability for industry and trade. Available in three sizes: RESY 1250 – Rotating table 1150 mm – AVAILABLE FOR IMMEDIATE DELIVERY RESY 1500 – Rotating table 1350 mm RESY 1650 – Rotating table 1500 mm (Other sizes available upon request!) Features & Benefits: ✔️ Material: Stainless steel – corrosion-resistant & durable ✔️ Rotating table: 1150 / 1350 / 1500 mm, depending on the model ✔️ Spray capacity: 500 l/min ✔️ Spray working pressure: 2x 2 Hp (RESY 1250) or 2x 2.2 Hp (RESY 1500/1650) ✔️ Heating power: 2x 7.5 kW – fast heating ✔️ Temperature control up to 60 °C ✔️ Basket capacity: 300 kg ✔️ Programming of the working time ✔️ Loading trolley included ✔️ Glass window included (for RESY 1500 & 1650) or optional (for RESY 1250) ✔️ Voltage: 380 – 400 V ✔️ Weight without liquid: 400 kg (RESY 1250/1500) or 500 kg (RESY 1650) Perfect for: – Workshops – Industrial companies – Job shops – Maintenance Other systems available from us: ✅ Immersion tank ✅ Paint stripping tank ✅ Mobile extraction systems ✅ Washing systems ✅ Powder coating oven ✅ Spray booth ✅ Extraction system + make-up air system ✅ Mirroring technology Fpodpfxs Agnx Ao Aikjp Delivery & Warranty: Our parts washing systems are custom-made – delivery time approx. 7 – 14 working days. Delays may occur in case of high order volume. 1 year manufacturer's warranty included! Contact: Do you have any questions or would you like a customized offer? Our support team is available for you at any time! Request now – we look forward to hearing from you!

Condition: used, Year of construction: 2021, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 2,000 W, pipe length (max.): 6,000 mm, working length: 6,000 mm, input voltage: 400 V, type of cooling: water, overall weight: 8,000 kg, HSG TH65 tube and profile cutting laser. The machine is designed for processing various types of metal materials, including structural steel, stainless steel, and aluminum. It enables the cutting of tubes and profiles. The device is equipped with an automatic material feeding system, a laser cutting head, and control software. The machine can be inspected at our production facility. Cutting tests can be arranged upon prior agreement. Fsdpfx Aijxu Ewhjkepp

Condition: as good as new (ex-display), Year of construction: 2024, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 watts Control system: Siemens Sinumerik 840D Operating hours: 24 hours Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 optional) Max. dimensions of square profiles: 120x120 mm Max. dimensions of rectangular profiles: 150x100 mm Max. profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. profile weight: 37.5 kg/m Max. material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability accuracy: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H, C, U, L *Footprint L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on the equipment variant Standard equipment Control system Sinumerik 840D Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for outputting analog values (power, speed, pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Fpjdpod Tt Atefx Aikop Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 watts (including cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 1960, condition: not inspected (used), Forst RF 20x2000 internal broaching machine -WKG 189- Data: Manufacturer: Forst Type: RF 20x2000 Fpjdshu E Egepfx Aikop Year of manufacture: 1959 Max. Tractive force: 20t Max. Stroke: 2000mm Max. Cutting speed: 5,6m/min Max. Return speed: 30m/min Max. Workpiece diameter: Ø 300mm Max. Tool diameter: Ø 90mm Weight: 3,5t Remark: without tub

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Fpedehwrhmepfx Aikep Cooling Mode: WATER COOLING

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h Fpjdpohtryxjfx Aikep -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: as good as new (ex-display), Remark: Fpsdpfxspbvw Hj Aikjp This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the pipe bracket: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf beams Frame depth: 800 mm Included in delivery 01x tube stirrup, II. choice (new goods) Partly with stirrup pad Type: KTB 80 Material color: galvanized Total height: approx. 420 mm Total depth: approx. 754 mm TubeØ: approx. 12 mm Weight / pcs.: approx. 0,250 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Year of construction: 1997, condition: good (used), machine/vehicle number: 403970905140, Offer 23291 Technical data: Fpjdpfx Aepr Utljiksp Tube end-working machine with six-fold turret - tool holder. Tube diameter 6 - 40 mm Max. Forming length 100 mm Drive 400 V / 7,5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 watts Control system: Siemens Sinumerik 840D Fodsdx Nfwjpfx Aikjpp Operating hours: 24 hours Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 optional) Max. dimensions of square profiles: 120x120 mm Max. dimensions of rectangular profiles: 150x100 mm Max. profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. profile weight: 37.5 kg/m Max. material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability accuracy: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H, C, U, L *Footprint L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on the equipment variant Standard equipment Control system Sinumerik 840D Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for outputting analog values (power, speed, pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 watts (including cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, FG170 flat bar and square tube polishing machines are equipments with a solid construction and ready for intensive work in bars or rectangular tubing. These machines enable the work up to 170mm width with multiple combinations of belt heads and brushes. FG170 Z has one abrasive belt unit, while FG170 ZK combines the abrasive belt head with an abrasive brush. A double abrasive belt machine, FG170 2Z, and double abrasive belt plus brush, FG170 2ZK are also available. Other options such as 3 abrasive belts or modification of order of belts and brushes can also be supplied. Different configurations: Finishing and removing imperfections of square and rectangular tubes, flat bars or any flat component with different combinations of abrasive belt and brush stations. Abrasive brush head: Smooth finishing after belt grinding operation with non-woven brush. Square or rectangular tube finishing: High quality of surface finishing on stainless steel tubes, tube after tube also flat bars. Quick abrasive belt replacement: Tool-free abrasive belt replacement. Fast and easy belt change in few seconds. Fixed working height: FG machines have a constant working height. The adjustment for different thicknesses is made by the movement of the abrasive stations, keeping the conveyor belt always at the same level. This helps the work of long tubes and bars without having to adjust roller tables. Technical Details - FG170 Working capacity (Ø mm) 170x200 No. belt stations (Z) 1-3 No. brush stations (K) 0-2 Abrasive belt dimensions (mm) 170x2000 Abrasive brush dimensions (mm) 170xØ200 Abrasive belt speed (m/s) 20 Abrasive brush speed (m/s) 15 Feeding speed (m/m) 6+12 Abrasive belts motor per head (kW) 4 Fjdpfx Aod Ix Nteikjpp Abrasive brush motor per head (kW) 3 Feeding motor (kW) 0.45 Total power (kW) 8.5 (ZK) Consumption (A) 18 (ZK) Dust extraction connection per head (Ømm) 80 Dimensions (mm) 1500x1000x1900 (ZK) Weight (kg) 740 (ZK)

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Fjdpovugv Aofx Aikjpp Ø 38.1 mm Ø 48.3 mm Ø 70 mm Technical specifications Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg