Used Immersion Tub for sale (835)

Condition: new, Year of construction: 2025, big Tube and profile laser cutting machine. up to diameter H profile till 12 meter tube or profile lenght laser head depend on material thickness. offer by request. installation and training include. Nksdpfx Ajmxl S Aegwjw

Condition: used, maximum load weight: 30,350 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2024, Equipment: ABS, DOLL tera 2-Axle Lowbed Semi-Trailer Detachable gooseneck and additional drive-over rear bogie First registration: 06/2024 Mileage: only 43,398 km Unladen weight: 14,650 kg Permissible total weight: 45,000 kg Gooseneck length: 3,070 mm Coupling height: 1,200–1,280 mm Swing clearance radius: 2,350 mm Lowbed length: 6,800 mm Telescoping length: 5,700 mm Rear axle chassis length: 2,700 mm Excavator trough width: 700 mm Excavator trough depth: 550 mm Loading height lowbed: 300 mm Loading height above running gear: 955 mm Trailer width: 2,550 mm Hydraulic suspension: -70 / +530 mm Technical fifth wheel load: 21,000 kg Axle load: 24,000 kg Detachable gooseneck with external main frame Trailer paint finish: 3-coat incl. spray galvanizing DOLL Tronic CAN-Bus system Lowbed floor: 45 mm spruce hardwood planks between the flatbed frames 24-volt electro-hydraulics Trailer functions operated via DOLL keypads on the gooseneck ADDITIONAL STEERING with RADIO REMOTE EEG electronic single tracking for straight-line driving At the rear: aluminum folding ramps with lifting mechanism, length 2,100 mm, width 600 mm, manual width adjustment, load capacity 20,000 kg Load securing in lowbed: 7 pairs of swiveling lashing rings, 13,400 daN lashing force 5 pairs of stake pockets in the side frame 3 pairs of M36 threads on the outside for screw-in lashing brackets Chassis: DOLL tera pendulum axles with hydraulic suspension (BPW axles) All axles hydraulically forced-steered, max. 60° steering angle on the last axle All lubrication points connected to the automatic central lubrication system (ZSA) WABCO trailer EBS with ABS and RSS Air tank in aluminum BEKA-MAX centralized lubrication system for front and rear bogie Oversize package with folding loading width extensions (2x 225 mm), warning sign package extendable to 3,200 mm wide Tires: 8x 245/70 R 17.5 Nsdpfx Agox E Ixlswskw RENTING is the new BUYING—immediately available from us as a full-service rental!

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone at ...). Seppi M. MIDI-KASTOR / 5–15 t / Stump Grinder / NEW / In stock & available immediately Price: €15,290.00 net / €18,195.10 gross - Cutter disc width: 0.10 m - Cutter disc diameter: 0.60 m - Total width: 0.80 m - Depth: 1.10 m - Height: 1.15 m - Weight: 450 kg - Stump grinder for excavator mounting - For the removal of stumps and tree roots Nksdpfx Asyl Hggegwsw - Grinds stumps and roots up to 30 cm deep - Suitable for excavators from 5 to 15 t - For mounting on various adapter plates - Drive designed for hydraulic motor, dependent on carrier machine flow rate - Indirect V-belt drive with 5 V-belts - Double chain protection - Rotor equipped with 32 fixed carbide-tipped tools - Colour: Red RAL3020 · Anthracite RAL7021 OPT 073 PISTON MOTOR Axial piston hydraulic motor F12-60 cm³ with pressure relief valve - Displacement in cm³: 60 - Required hydraulic pressure in bar (min–max): 200 – 350 - Required hydraulic flow rate in l/min (min–max): 70 – 100 Optional: MS08 adapter plate incl. bolts and installation = €750.00 net For operation, an independent hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drain. The device is supplied without hoses, connectors, or adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. Our warehouse carries a wide range of Seppi M. products, all available for immediate delivery! Please contact us at ... for more information. We are also happy to prepare a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. KASTOR hyd to / Stump Grinder / NEW / In Stock & Immediately Available Price: €27,790.00 net / €33,070.10 gross - Cutter wheel width: 0.11 m - Cutter wheel diameter: 0.90 m - Overall width: 0.88 m - Depth: 1.80 m - Height: 1.30 m - Weight: 868 kg - Stump grinder for excavator attachment - Designed for removal of tree stumps and roots - Grinds stumps up to 50 cm deep - Suitable for excavators from ... t - Can be mounted to various attachment plates - Drive intended for hydraulic motor depending on the hydraulic output of the carrier machine - Indirect double V-belt drive with 2x5 V-belts - Hydraulically adjustable hood - Double chain guard - Rotor equipped with 50 fixed tungsten carbide-tipped tools - Colour: red RAL3020 · anthracite RAL7021 OPT 074 Two axial piston hydraulic motors F12-80 cm³ with overpressure valve - Displacement in cm³: 2 x 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow in l/min (min-max): 140 – 220 An independent hydraulic system is recommended for operation. Three hydraulic lines are required: feed, return, and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections, or attachment plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery at our warehouse! Please contact us at ... for further information. On request, we are happy to provide a financing offer. We are official sales and service partners for: - Seppi M. - Magni Telehandlers - DMS - Westtech - JCB Construction Equipment Njdpfsyltvzex Agwskw - Mercedes-Benz - Iveco - Holp - OilQuick With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range to you! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Condition: excellent (used), Complete workshop for manufacturing hydraulic hoses. Includes: * O+P machine for custom hose cutting * O+P machine for crimping fittings * Stock of various fittings * Stock of hydraulic hoses Njdpfx Ajyfg Svjgwokw

Condition: good (used), Sputter target, tube, pipe -Pipe dimensions: Outer: Ø 152 mm Inner: Ø 125 mm Total length: 3249 mm -Number: 2 pipes available -Price: Complete -incl. transport crate -Box dimensions: 3600/570/H585 mm Nkjdsb Ilw Uspfx Agwew -Weight: 306 kg

Condition: good (used), Baltographe, Baltograph Njdpsd Sacpsfx Agwjkw -Dimensions: 715/270/H410 mm -Weight: 78.5 kg

Condition: used, Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm Nksdpfscht Utsx Agwsw -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Condition: used, High precision tube mill 38x2,7 SEUTHE / EFD / MAIR Technical specifications - Tube OD range: 11 – 38 mm - Wall thickness range: 0.7 – 2.7 mm - Maximum speed: 120 m/min Special features - Strip whashing tunnel: Cleaning tunnel to remove oils and dirt from strip - Cold rolling inline with Vollmer thickness control: Reduction of strip thickness from 0.03mm to 0.3mm - Reinforcement of FP3 for high tensile strength - Individual motorization in sizing stands - Carbide tungsten rolls - Ceramic rolls at welding stand - All contact parts are NON-MARKING SEUTHE / EFD / MAIR HF welded tube line 38x2,7 This premium-quality production line engineered for the manufacture of high-tolerance welded steel tubes with superior surface finish and dimensional accuracy. Designed to meet the most demanding requirements of the automotive, furniture, and high-quality tube manufacturing sectors, this line combines advanced forming technology, inline strip processing, and state-of-the-art automation. This tube mill is specifically developed to deliver exceptional roundness (up to 0.05 mm) and tight dimensional tolerances, producing finished tubes with tensile strength of up to 660 N/mm². The line incorporates a strip washing tunnel to eliminate oils and contaminants, ensuring optimal welding conditions and consistent surface quality. A key feature is the inline cold rolling unit with Vollmer thickness control, allowing precise strip thickness adjustment before forming. This system enables thickness reductions from 0.03 mm up to 0.3 mm, guaranteeing perfect thickness control and enhanced product consistency. Reinforced fin pass stands and individually motorized sizing stands (Siemens electrics, upgraded in 2024) ensure maximum stability, flexibility, and repeatability during production. Nkedpfx Ageyl Uhljwjw The forming and welding section is equipped with an EFD Weldac HF welder (2019), carbide tungsten rolls, and ceramic welding rolls, with all contact parts designed to be non-marking, making the line ideal for visible and high-specification tubes. The sizing section and online inspection systems, delivers excellent roundness, and internal diameter tolerances (±0.08 mm). Cutting operations are handled by a MAIR flying cut-off saw (2019) with CNC control and non-marking clamping jaws, enabling optimized cutting cycles and high productivity. The line also includes eddy current testing, demagnetization, defect marking, cleaning, and anti-rust oiling units, ensuring fully controlled quality output. Current status Offered in very good condition, currently connected and in production in Europe, this complete tube mill is an excellent opportunity for manufacturers seeking a high-end, turnkey solution for precision welded tube production. Tube OD range: 11 – 38 mm Wall thickness range: 0.7 – 2.7 mm Maximum speed: 120 m/min

Condition: used, High Precision Tube Mill SEUTHE / ABBEY / MAIR RS65 – 76.2 x 3.25 mm High-quality precision HF welded tube mill designed to manufacture tubes with excellent surface quality and tight dimensional tolerances, specifically engineered for demanding applications in automotive, furniture, and high-quality tube production. Technical specifications - Tube mill: High precision - Model: RS65 & MPS150/4/F - Tube OD range: 25 – 76.2 mm - Wall thickness range: 0.7 – 3.25 mm - HF welder: 250 kW - Maximum speed: 100 m/min Special features Nodpfx Ageyl Ugbowskw · Strip washing tunnel: cleaning tunnel to remove oils and dirt from strip · Inline cold rolling with Vollmer thickness control - Perfect thickness control of strip - Strip thickness reduction: 0.03 mm to 0.3 mm · Reinforced forming stands for high tensile strength · 6 sizing-reducing stands · All contact parts are non-marking SEUTHE / ABBEY / MAIR HF welded tube line 76x3,25 mm Consistent tolerances and superior surface finish RS65 line integrates strip washing tunnel and inline cold rolling unit (Carl Wetzel KG) with Vollmer thickness control for precise strip management (0.03–0.3 mm reduction). ABBEY ETNA forming section features motorized breakdown stands, finpass stands, 250 kW HF welder, complete inside scarfing and triple OD scarfing, plus 6-stand sizing with individual motors. Inline Quality Control & Finishing Prüftechnik Eddycheck 610 eddy current testing, demagnetisation, defect marking, anti-rust oiling, and MAIR automatic magnetic packing system ensure production-ready output. High-Speed Cutting SEUTHE TS90 flying saw with linear OPTRONIC CNC control and non-marking jaws supports production speeds up to 100 m/min. Delivers consistent high-quality tubes with integrated thickness control and comprehensive inline testing—optimized for demanding industrial applications. Current status Offered in very good condition, currently connected and in production in Europe, this complete tube mill is an excellent opportunity for manufacturers seeking a high-end, turnkey solution for precision welded tube production. Tube diameter: 25 – 76.2 mm Thickness: 0.7 - 3.25 mm Maximum speed: 100 m/min Coil OD: 2100 mm Coil ID: 1100 mm HF welder: 250 kW Total installed power: Approx. 680 kVA

Condition: used, Year of construction: 2015, TUBE LASER CUTTING MACHINE, Model LT8, made by ADIGE This tube laser cutting machine is in excellent working condition. Manufactured in 2015, it has been meticulously maintained, ensuring optimal performance. Technical data: - Round profiles diameter: 20 - 220 mm - Square profiles: Max. 200x200 mm - Max length: 8500 mm - Max tube weight: 32 kg/m - Laser Source: CO2 - Laser Power: 3 kW - Lens holders for: 5 & 7.5 “ - Bundle loader & Loading module: with 5 arms - Tube length loading: 8500 mm - Cutting head: 3D Tilt head - Max tube length unloading: 8500 mm - Unloading modules for tube lengths: 4500mm / 6500mm / 8500 mm - Front unloading conveyor for short parts: Up to 500 mm Scope of supply: - TRUMPF TruLaser Tube 5000 - Tube LoadMaster - Bundle loader with 8.5 m step loader - Finished part 8.5 m collecting table - Chiller - Extractor Special features - Machine integration Rofin - Rear scrap conveyor - Capable for open profiles - Handling option for delicate tubes - High speed pierce boost - Weld seam detection - Artube modules second licenses + USB hardware key - CAD – CAM - Artube adv CAM features - Direct import steps / Iges files - Post Processor LT8 for Artube (1st license) - Production time and Cost calculation - Artube Service Contract Annual Fee - Advanced edit - Part viewer - Cut and fold library - Booster drilling process - Remote tele-diagnostic - Siemens 12 months full warranty - Auto focusing head - Protube Express off line nesting and scheduling - Protube Enterprise productivity & machine monitor - Whole nbar processing software - Pierce booster edge detection Round profiles diameter: 20 - 220 mm Square profiles: Max. 200x200 mm Max length: 8500 mm Max tube weight: 32 kg/m Nkodpfx Ajyma Itegwjw Laser Source: CO2 Laser Power: 3 kW Lens holders for: 5 & 7.5 “ Bundle loader & Loading module: with 5 arms Tube length loading: 8500 mm Cutting head: 3D Tilt head Max tube length unloading: 8500 mm Unloading modules for tube lengths: 4500mm / 6500mm / 8500 mm Front unloading conveyor for short parts: Up to 500 mm

Year of construction: 2024, condition: refurbished (used), Tube Straightener 6V1+1 90×5, made by CARTACCI Recently revamped Tube diameter size : 12 – 90 mm Wall thickness : 0,8 – 5 mm Tube length : 4 – 12 m Straightening force : 16 Mp Straightening precision : 0,5 mm/m Speed infinitely variable : 0 – 100 m/min Diameter: 12 – 90 mm Thickness: 0,8 – 5 mm Length: 4 – 12 m Straightening force: 16 Mp Straightening precision: 0,5 mm/m Speed: 100 m/min Nodpfx Asyma Hvsgwekw

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel 4) Unloading bin Optional to be build new upon requirement : 5) Double output craddle 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Max. tube length: 7.500 mm Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7 Nkodpjymaypofx Agwjw

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: Nedpfxsymax Ee Agwekw - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: Nkedoymaw Uspfx Agwew - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Year of construction: 2019, condition: used, Automatic high-precision tube cutting machine TS72, made by ADIGE Cuts round, square, rectangular, and flat-oval tubes up to 102 mm in diameter. Efficient production: - Program up to 4 different cut lengths per tube - Continuous measurement changes for small batches Organized unloading: - Program up to 3 different unloading positions plus a scrap container. Non-Stop unmanned production: - Automatic production changes without tools. - High-capacity bundle loader holds up to 4000 kg of material. Superior Cutting Quality: High precision, efficiency, and versatility for tube cutting - Independently operated hydraulic material clamps ensure precise clamping and high cut accuracy. - Blade and clamps detach during return movement to prevent wear. TECHINCAL DATA Working range - Round tube cutting: from 8 to 102 mm - Square tube cutting: from 10x10 to 80x80 mm - Bar cutting: Up to 40 mm - Cutting length: From 20 mm to 3.000 mm Loading - Loading from bundle: Fully automatic - Unloading positions: 3 + 1 (scrap) Tools - Cutting blade diameter: From 200 to 350 mm General - Total installed power: 20 kW Round tube cutting: from 8 to 102 mm Square tube cutting: from 10x10 to 80x80 mm Bar cutting: Up to 40 mm Cutting length: From 20 mm to 3.000 mm Loading from bundle: Fully automatic Unloading positions: 3 + 1 (scrap) Cutting blade diameter: From 200 to 350 mm Total installed power: 20 kW Nsdjymangopfx Agwjkw

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: · Accumulating table for single-tube extraction via chain conveyors · Walking beam system for synchronized transport of two tubes · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations Nedpfxsyl Upvo Agwjkw · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Technical data · Manufacturer: MAIR · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Condition: used, HF Tube mill LT76, made by OLMA (ITALY) and TLM (SPAIN) Manufacturers : - TUBE MILL : OLMA (Italy) / TLM (Spain) - HF WELDER : GH ELIN (Spain) - ZINC SPRAYING UNIT : METALLISATION Including tooling for : 20 / 25 / 28 / 30 / 32 / 35 / 38 / 40 / 42 / 45 / 48 / 50 / 52 / 55 / 60 / 65 / 77 mm & Turk heads for squares and rectangular shapes Round tube diameter: 20 - 76 mm Square tube diameter: 20×20 – 60×60 mm Rectangular tube diameter: 20×10 – 100×20 mm Tube thickness: 0,9 - 2,5 mm Tube length: 4 - 8 m Nkedjyl Ukajpfx Agwew Speed: Up to 40 m/min

Condition: used, TUBE MILL 130 x 4.5 made VAI SEUTHE Manufacturers: - Mill: VAI (Austria) technology - HF Welder: ELOMAT - Packing Unit: Local Made Specifications: - Round tube diameter: 42 – 130 mm - Square tube diameter: 40x40 - 100x100 mm - Rectangular diameter: 60x30 - 80x120 mm Nkjdpfx Ajyl Uipsgwsw - Thickness: 1 - 4,5 mm - Cutting length range: 4000 – 8.000 mm - Maximum production speed: 80 m/min - Maximum accumulation speed: 200 m/min Scope of supply: - Coil Loading car - Single expandable decoiler - Feeding roll - Semi-Automatic shear and end welder - Horizontal accumulator with external ring with individually driven rolls - Forming section: 4 Break down + 3 Finpass stands - Welding section: 3-roll heavy duty welding stand - Double OD scarfind with hydraulic movement up/down - Cooling tunnel - Sizing section: 4 stands - Turk head section - Flying saw with precision +-1.5mm - HF welder 300 KW, made ELOMAT - AUTOMATIC PACKING UNIT with run out conveyor (approx. 24 meter) for tube up to 8 m - COMPLETE EMULSION PLANT including: Emulsion filtering units, heat exchanger, pumps, and all the necessary controls - Hydraulic, pneumatic and electrical units and connections - TOOLING & ACCESSORIES : Existing roll sets Round tube diameter: 42 – 130 mm Square tube diameter: 40x40 - 100x100 mm Rectangular diameter: 60x30 - 80x120 mm Thickness: 1 - 4,5 mm Cutting length range: 4.000 – 8.000 mm Maximum production speed: 80 m/min Maximum accumulation speed: 200 m/min

Condition: used, Tube mill OTO 101.3 Manufacturers: OTO MILLS, SEUTHE & THERMATOOL The line is in operation and inspection during production is possible. The line is complete with: - OTO MILLS Entry line with Double uncoiler, Strip joiner & Strip accumulator - CANTI-SAG Forming, Sizing line & Turks heads TWL RS90 - THERMATOOL HF welder CFI 300kW - SEUTHE Flying saw TS90 - ATTL Automatic packaging unit - ITIPACK Strapping unit - OSU Metallization Technical data: - Diameter range: 32 – 101 mm - Squares: 20 x 20 - 70 x 70 mm - Rectangular: 40 x 20 - 80 x 50 mm - Thickness: 0.8 – 3.0 mm - Tube Length: 4 – 10 m - Voltage: 380 / 50 VAC / Hz - Direction: Left - Right - Material: Carbon steel – Hot rolled, pickled, galvanised, cold rolled - Tensile: 330 – 520 N/mm2 - Coil Weight: 2x6.000 Kg - Coil Width: 50 – 250 mm - Coil ID: 508 – 610 mm - Coil OD: 1100 – 2000 mm Scope of supply: Nksdpeyl Uicsfx Agwsw 1. Entry line OTO MILLS with Double uncoiler, Strip joiner & Strip accumulator 2. Forming, Sizing line & Turks heads 3. THERMATOOL 300kW welder 4. Fume exhaust system 5. Cooling tunnel 6. Detwister unit 7. Flying saw Seuthe 8. Roll way 9. Automatic packaging machine 10. Itipack strapping machine 11. Electrical System 12. Pneumatic System 13. Hydraulic Systems Tube diameter: 32 - 101 mm Squares: 20 x 20 - 70 x 70 mm Rectangular: 40 x 20 - 80 x 50 mm Thickness: 0,8 - 3,0 mm Tube Length: 4 – 10 m Direction: Left - Right Material: Carbon steel – Hot rolled, pickled, galvanized, cold rolled Tensile: 330 – 520 N/mm2 Coil Weight: 2x6.000 Kg Coil Width: 50 – 250 mm Coil ID: 508 – 610 mm Coil OD: 1100 – 2000 mm

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Noderc Hiispfx Agwokw

Condition: used, RSA RASACUT SC 3000 – Complete automatic tube cutting, deburring, measuring, cleaning & drying line This is a complete RSA high-performance tube processing line for continuous production, from stock tube to finished fixed-length tube sections up to 3,000 mm. The system integrates the full workflow: Bundle Loader → Cutting → Deburring → Measuring → Cleaning (washing) → Drying, with automatic transfer between stations. KEY FEATURES · Fixed length cutting up to 3,000 mm · Complete RSA line: Bundle Loader + Cutting + Deburring + Measuring + Cleaning (washing) + Drying · Automatic tube singulation from bundle magazine · Servo-controlled saw forward feed with programmable cutting parameters · Automatic interlinking between stations (no manual adjustment required) · Deburring with 360° rotation, inside + outside edges · 100% length measuring with automatic rejection · Integrated washing and drying system for finished tube preparation · Siemens control: S7-300 + OP17 · Supplied with a large set of wrap-around jaws TECHNICAL DESCRIPTION 1. Bundle loader magazine The tube bundle is loaded by crane or forklift into the magazine. The system automatically singulates the tubes and feeds them into the roller infeed, allowing continuous production from stock tubes up to 8,000 mm. 2. Cutting | RSA RASACUT SC 3000 Automatic sawing unit with servo-controlled saw feed and electronically controlled length stop. Tubes are clamped and cut to the programmed fixed length, with programmable cutting parameters for repeatable cutting results. 3. Deburring | RSA RASAPLAN XY 3000 Automatic end deburring system using high-performance brushes on both sides. Each tube rotates 360° during brushing, enabling simultaneous inside and outside deburring of both end faces. Automatic adjustment is performed from the central control. 4. Measuring | RSA RASACHECK 3000 A Njdpfx Asyllvyegwokw Integrated length measuring station providing 100% control of finished parts. Workpieces outside the programmed tolerance limits are automatically rejected, ensuring only compliant parts proceed to the next stages. 5. Cleaning | RSA RASACLEAN ET 3000 Washing system designed for thorough removal of swarf and dirt particles. Workpieces pass through a sealed washing zone where the cleaning medium is applied under pressure and contaminants are collected in a swarf filter. 6. Drying | TURBODRY Hot-air drying station with adjustable air volume and temperature. Removes droplets and condensation after washing, delivering dry tube sections for downstream handling. 7. Tooling | Large set of wrap-arount jaws Supplied with a large set of wrap-around jaws covering multiple tube diameters, enabling quick changeovers without additional tooling. WORKING RANGE · Round tube diameter: 10 to 90 (101) mm · Wall thickness: 0.6 to 6 mm · Stock length (incoming tubes): 8,000 mm · Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) · Tube weight: Max.10 kg/m · Length/diameter ratio: 2:1 · Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Can be inspected in production (seen running). Contact us for a quote, full details and inspection arrangements. Round tube diameter: 10 to 90 (101) mm Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Wall thickness: 0.6 to 6 mm Tube weight: Max.10 kg/m Length/diameter ratio: 2:1 Stock length (inc...

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness steel (max.): 8 mm, For Sale: TRUMPF TruLaser Tube 7000 (2013) – 3600W Tube Laser Cutting Machine We are offering a TRUMPF TruLaser Tube 7000 in very good working condition. This high-performance tube laser system delivers precise, flexible, and efficient tube processing for demanding production environments. Key Specifications: Model: TruLaser Tube 7000 Laser Power: 3600 W Year of Manufacture: 2013 Maximum Tube Diameter: 250 mm Maximum Raw Material Length: 9,200 mm Maximum Finished Part Length: 6,500 mm Maximum Material Thickness: Mild Steel: 8 mm Stainless Steel: 6 mm Aluminum: 5 mm Cutting Speed: 0.8 – 10 m/min Bevel Cutting Capability: Up to 45° Nksdpfeylnw Tex Agwsw Features: Flexible unloading system with part sorting Highlights: ✔ XXL tube processing capacity ✔ High-quality bevel cuts up to 45° ✔ Reliable and proven TRUMPF technology ✔ Ideal for structural steel, mechanical engineering, and industrial fabrication The machine is well maintained and ready for inspection. For further information, pricing, or to arrange a viewing, please contact us.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets Nkedpfx Aex E Rdwsgwew - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Thrust force: 3.5 tons Nkodpfx Agen Sm Ddswjw Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg