Used Hydraulic Deep Drawing Press for sale (28,853)

Condition: good (used), Year of construction: 1995, power: 22 kW (29.91 HP), pressing force: 120 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,000 mm, table height: 950 mm, retraction force: 5 t, total length: 2,100 mm, total width: 2,050 mm, total height: 3,800 mm, control cabinet height: 1,900 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, installation height: 900 mm, Equipment: safety light barrier, Deep drawing press, press power 120 to, stroke 400 mm, distance between tabels 900 mm, with oil cooler, light security bareer, dimension 2100x2050x3800 mm, weight ca. 13400 kgs Tedpeycin Usfx Akijd

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m Tjdpfx Akst Hwuisiod

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg Tjdpfxefxyh Ao Akied

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking Tjdpfx Akjzxcldjisd

Year of construction: 1986, condition: good (used), functionality: fully functional, machine/vehicle number: 540, SANDT 540 – 50 Ton Hydraulic Double-Column Press – 1350 × 600 mm Good quality German-built SANDT 50-ton hydraulic press, now available from our premises in Kent, England. A substantial industrial machine offering a large 1,350 × 600 mm working area, approximately 500 mm maximum stroke and 680 mm installation height. Suitable for a wide range of industrial cutting, die-cutting, punching, forming and manufacturing operations. Specification: 50-tonne press force 1,350 mm column width 1,350 × 600 mm table 1,350 × 600 mm ram Approx. 500 mm max. stroke Approx. 680 mm installation height 400 V Safety light curtain Separate hydraulic power pack Separate electrical cabinet Tedpfxez Icrts Akijd Approx. 3,000 kg Approx. dimensions: 3,000 × 1,200 × 2,800 mm Manufacturer: SANDT Model: 540 Year: 1986 Machine No.: 808673-72951 Price: £5,000 or best offer Machine can be inspected in Kent, England. Buyer to arrange collection/transport. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks,

Year of construction: 1978, condition: used, pressure 40 t distance between columns 600 mm stroke 150 mm table surface area 600x410 mm Tjdpfxsq Rhkwj Akiod ram surface 220x130 mm table height 850 mm weight of the machine ca. 2,5 t

Condition: ready for operation (used), Year of construction: 1997, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, operating speed: 7 mm/s, reverse speed: 50 mm/s, table length: 4,000 mm, throat depth: 500 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,500 mm, overall weight: 11,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, CNC Megoform PB 40-130 Upstroke press brake. Serial Number 0622183 - 25/09/97 4000 mm (4 meters) working bed length. Tonnage / Capacity: 135-ton capacity Daylight (without tools) 340mm Side frame throat depth 500m Advance speed 37mm/s Working speed 7.5mm/s Return Speed 50mm/s Tsdpsz Tdbhjfx Akisd Approx weight 11,000 Kgs Shipping dimensions L 4400mm , W 1800mm , H 2500mm Hurco auto bend 7 cnc controller X & R axis auto set , Z axis manual set Light guard

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm Tsdpfotndu Uex Akijd POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Todpfxe Adu Sdj Akisd TECHNICAL DETAILS PRESS Press force: 110 tons Table dimensions Length: 1,200 mm Width: 600 mm Number of slots: 3 MACHINE DETAILS Manufacturer: Chin Fong Type: OCP 110 N Year of manufacture: 1994 Machine type: Hydraulic press Dimensions Length: 2,500 mm Width: 2,000 mm Height: 3,500 mm Weight: 10,000 kg EQUIPMENT Table with 3 slots

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection Todpfx Ajz Ib R Iekisd The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm Tjdpfx Aoz Snrnskiod T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand Tedjz Hcz Sspfx Akiod - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: used, Year of construction: 1977, pressure 160 t throat 360 mm stroke 560 mm total power requirement 33 kW Tsdjt Hw E Ijpfx Akiod weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Tsdsz Nhp Ijpfx Akied

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING Tjdpjz Sva Hjfx Akisd - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Tsdpoifkldofx Akisd Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Tsdpfozvnpiex Akisd Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts Tjdefuangjpfx Akisd white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: used, Year of construction: 1993, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 160 t Retraction force: 40 t Drawing cushion pressure: 630 kN Ejector pressure: 50 kN Total power requirement: 42 kW Machine weight: approx. 19.5 t Stroke and movement data Stroke: 300 mm Stroke speed: 400 m/min Stroke speed under load: 16–42 strokes/min Return speed: 350 mm/min Drawing cushion stroke: 100 mm Ejector stroke: 50 mm Todpfxe Aa Ngbj Akisd Table and ram Table size: 1,500 × 700 mm Ram clamping area: 1,200 × 560 mm Working area Overhang: 360 mm EQUIPMENT Drawing cushion Ejector

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Schoen Type: SH/LF100 Year of manufacture: 1985 Machine type: Hydraulic press PRESS Pressing force: 100 t Table dimensions: 1,200 × 1,200 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 3,000 mm Width: 2,000 mm Height: 3,200 mm Todpfj Adu Ryjx Akijd Weight: 12,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press Tsdpfxjzp Ex Uj Akied - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 2013, pressing force: 500 t, total length: 6,000 mm, total width: 3,000 mm, total height: 5,000 mm, overall weight: 200,000 kg, Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces. Weight approx.: 200,000 kg Pressing force max.: 500 t Dimensions (LxWxH) approx.: 6000 x 3000 x 5000 mm Todpfx Akezyd Hloisd Year of construction: 2,013 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Press brake Condition: good Performance Data Pressing force: 80 t Bending length: 2,505 mm Tjdpfo Aa Aanjx Akiod Frame width: 2,200 mm Total power consumption: 7.3 kVA Machine weight: approx. 5.6 t Control System Control: AMADA-MELDAS NC 9 F Controlled axes: 7 Dimensions Space requirement: approx. 3 × 2.25 × 2.20 m EQUIPMENT Detailed machine documentation available

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press Tedpfx Ako Ad Hmgjiod The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: new, Sheet metal cutting dies Sheet metal cutting dies Sheet metal forming moulds Hot forged brass Deep drawing moulds Cold forged aluminium steel Automotive and spare parts White goods Industrial kitchen parts Industrial cooling parts Kitchen appliances Construction & building Product Info: Todpfx Ajfuam Rekijd No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate