Used Hurco Bmc 30 M for sale (160)

Year of construction: 2002, condition: ready for operation (used), Hurco VM 1 machining center Spindle speed max. 8000 RPM Travel: X: 660 mm Y: 406 mm Z: 508 mm Bdodpfx Aaji E Iaco Ijh Spindle: 2000 hours Complete software options, DXF, thread cutting without collet Various tools included, Hilma vise, drawer cabinet with tools.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,400 h, travel distance X-axis: 520 mm, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Hurco VC500i was manufactured in 2019. It features a robust control unit with WinMax software, ensuring efficient operation. The machine includes additional equipment such as a chip conveyor and a Spaleck finishing unit, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the Hurco VC500i vertical machining centre we have for sale. Contact us for further details. Bdsdpfx Aaoz Hzbdo Ioh - AC Volts: 400 V- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 9 KVA / 12 AMP- Full Load: 34 KVA / 49 AMP- Interrupt Capacity: 10000 AMPS- Short Circuit Current: 20 kA RMS Symmetrical- Max Ambient Temp: 35 DEG. C- Diagram No.: 003-4610-110- Control Unit / Software: WinMax (System Konfiguration)- Additional Equipment: Chip conveyor, Spaleck finishing unit/container, compressed air/coolant system line

Condition: ready for operation (used), Year of construction: 2006, operating hours: 63,442 h, controller manufacturer: HURCO, controller model: UltiMax, number of axes: 3, This 3-axis Hurco VMX 42 was manufactured in 2006. It features a tool tray with 24 positions, a chip conveyor, and a coolant tank with pump. Operating hours total 22,612.4, with spindle hours at 6,344.2. Consider the opportunity to buy this Hurco VMX 42 vertical machining centre. Contact us for more information. • Tool tray with 24 tool positions • Operating hours: 22,612.4 h • Spindle hours: 6,344.2 h Additional equipment • Chip conveyor Bdjdpfx Asyb Ryisa Ish • Coolant tank with pump

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Bsdpfx Aezl Hbcea Iodh Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We offer the following machine directly on behalf of the owner. It was delivered in 2026 but, due to changing requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance between spindle nose and table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000-line look-ahead) - STEP and DXF import - Automatic pocket and island detection Bdsdpfx Aozu Nz Dja Ioh - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 73,420 h, controller manufacturer: HURCO, controller model: Ultimax, This 3-axis Hurco VMX 24 was manufactured in 2004, featuring a robust CNC control system, HURCO Ultimax. It offers a table size of 760 × 510 mm with a load capacity up to 850 kg. The spindle can reach speeds up to 15,000 rpm, and the machine includes a 24-position automatic tool changer. Ideal for detailed milling operations. Contact us for more information about this machine. Bdodpeyb Da Ajfx Aa Ieh

Condition: ready for operation (used), Hurco process board 415-0194-001A with Hurco Dual RS232 board, used, 100% functional. Bedpfoi Ea R Iox Aa Isdh

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 820 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, General Control: Max 5 Year of manufacture: 2023 Working Area Travel X: 820 mm Travel Y: 550 mm Bjdpfxjyap Tfo Aa Isdh Travel Z: 500 mm Travel B: +110° / -110° Travel C: 360° Tool changer: 60 stations Rapid traverse X/Y/Z: 36 / 36 / 36 m/min Spindle Speed: 12,000 rpm Power: 16 kW Tool holder: SK40 NC Rotary Table Clamping surface L x W: 600 x 600 mm Spindle nose to table: 150 - 650 mm Table load capacity: 350 kg Equipment Chip conveyor Coolant supply Direct path measuring system Through-spindle air 5-axis simultaneous capability Workpiece measurement Tool measurement High-pressure coolant (IKZ)

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces 35x72) Coolant system adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter at full capacity: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Bodpfjzka Hiex Aa Ijdh Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hrs Spindle hours: approx. 5,000 hrs The following items are not included in the scope of delivery: vices, tools, extraction system, tool cart. Further technical data can be found in the attached documents.

Condition: new, functionality: fully functional, New joystick as a replacement for Hurco Ultimax 4 trackball. For sale is a new joystick suitable for Hurco CNC controls with Ultimax 4. The joystick replaces the original Hurco trackball and is an ideal modern, robust alternative if the trackball is defective or inaccurate. Installation is easy and can be completed within a few minutes. No special technical skills are required. An installation video guide is available online (search on YouTube: "HuStick4 - Joystick passend zu Hurco Ultimax 4"). Bjdpfjy N Eppjx Aa Isdh