Hurco VMX 42

Hurco VMX 42

Condition: used, Year of construction: 2019, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2019 Control : Hurco MAX5 Speed : 12000 rpm Movement X/Y/Z : 1067/610/610 mm Tool holder : SK40 Spindel: Technology:Motorspindle Speed:12.000 rpm Power:36,5 kW Torque:118 Nm Taper:SK 40 NC-Swivelhead: B-Axis:0,001° Swivelrange:-/+ 92° NC-Roundtable: C-Axis:0,001° Clamping surface:ø600 mm In general: Toolmagazine:40 Stations Clamping surface Static table:1.270 x 610 mm Tableloading (max.):1.360 kg Rapid travers in X/Y/Z:38/38/32 m/min Lhedezuik Ejpfx Afkek Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Filter and High-pressure, 20 bar Workpiecemeasurement:Funk-Touchprobe, Renishaw RMP 600 Oilmistseparation:Interface mechanical preapred Setup operation:Electronic handwheel Further Equipment:Rinsing pistol

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader. Lodpfx Aeydqpijfkjhk

Condition: like new (used), Year of construction: 2018, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: HURCO MAX5, overall weight: 6,500 kg, spindle speed (min.): 12,000 rpm, operating hours of spindle: 3,900 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, The machine is in like-new condition and ready for immediate use. Lhodpfxozuxide Afkok A video can be sent upon request.

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 1060mm/610mm/610mm, table dimensions X/Y: approx. 1270mm/610mm, max. table load: 1100kg, spindle power: 18kW, feed rate: 7600mm/min, rapid traverse: 30m/min, tool positions: 24, tool holder: SK40, speed: 12000rpm, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 450mm/3750mm/2800mm, weight: approx. 6700kg, control: Hurco Ultimax 4. Documentation available. On site inspection is possible. Lhjdpfjyh Nvmjx Afksk

Condition: excellent (used), Year of construction: 2013, Spinner TC600-65MC cnc lathe with C-axis and driven tools Year: 2013 Technical details: Control SIEMENS 840D-SolutionLine Spindle speed range: 4500 rpm Spindle motor power: 11 kW/ 16.5 kW Torque: main spindle (siemens, s6 40%) 301 Nm X-Axis Movement: 230 mm X-Axis Rapid Traverse: 15 m/min Z-Axis Movement: 740 mm Z-Axis Rapid Traverse: 24 m/min Center distance: approx. 600 mm Max turning diameter: 310 mm Workpiece diameter over bed: 425 mm Number of turrets: 1 Tool taper: DIN 69880/ VDI30 Number of turret stations: 16 Driven tool holder positions: 16 C-axis Speed of rotating tools: 6000 1/min Driven tool power: 6 kW Tailstock: Quill stroke: 120 mm Lhodpfxjy Sv Egs Afkjk Adjustment travel: 475 mm Machine dimensions: 2730x1500x1620mm Machine weight: 4500 kg Accessories/options: - hydraulic chuck with jaws - collet type chuck with collets - static tool holders - driven tool holders - Renishaw tool measuring arm - Swarf conveyor - High pressure coolant system - Bar feeder - Documentations - Parts cather Under power in our warehouse!

Condition: excellent (used), Year of construction: 2018, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Lodozmy T Uspfx Afkjhk Internal coolant system Chip conveyor Detachable handwheel

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,800 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. Lhodsy Tw R Hepfx Afkok • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h (estimated) • Due to the installation of a new hard drive, the spindle hours can no longer be accurately verified. • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Only steel and aluminium have been machined. • Internal coolant system Additional equipment • Chip conveyor • WinMax Mill Version V09.01.39314 • Removable handwheel • No Accessories included, but can be purchased at a reasonable price for an additional charge. Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,222 h, total height: 3,240 mm, overall weight: 8,880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • Table Size: 1500 x 660 mm • T-Slots: 6 x 18 mm Lsdpsx D E Eqofx Afkjhk • Maximum Weight on Table: 2000 kg • Spindle Nose to Table: 101 mm • Maximum Spindle Speed: 12000 rpm • Spindle Power (15 min/Continuous): 15 kW / 11 kW @ 720 rpm • Spindle Torque (15 min/Continuous): 198.9 Nm / 116.7 Nm @ 720 rpm • Tool Type: CAT 40 / Big Plus® • Tool Capacity: 40 • Maximum Tool Diameter: 76 mm • Maximum Tool Length: 300 mm • Maximum Tool Weight: 7 kg • Tool-to-Tool ATC Time: 2 sec Dimensions Machine Depth 5055 mm

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 Lhedpfxozguh Hs Afksk SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Lsdpfx Aezguhyefkohk Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t Ledpfxou Iddnj Afkohk air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, Lhsdpfx Aszh Nczefkok through spindle coolant, swarf conveyor, spindle probe.

Condition: used, Year of construction: 2006, Hurco VMX 42 i, Year of manufacture: 2006, Control system: Ultimax 4, Travel range X/Y/Z: 1060/610/610 mm, Tool changer: 40 positions, Tool holder: SK 40, Spindle speed: up to 10,000 rpm, Lhedpjzg E Nusfx Afkok Chip conveyor, Internal coolant system (IKZ), X and Y axes have slight play.

Condition: good (used), Colchester Mastiff 1400 lathe for sale. The machine comes from a workshop that has ceased operations. Fully operational and ready for use. Ledpsw Al T Usfx Afkohk For more information, please contact us.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,067 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Number of axes: 3 Spindle speed: 12,000 rpm Drive power: 12 kW Torque: 237 Nm Table size, X-axis: 1,270 mm Table size, Y-axis: 610 mm MACHINE DETAILS Number of tools in the magazine: 30 Tool holder: SK40 Operating hours: 12,000 h EQUIPMENT Lodpszapr Uofx Afkshk Internal coolant supply Spindle cooler