Used Htc for sale (47)

Condition: used, This listing is for 1 of 3 Roche LightCycler II Thermal Cycler Nwsdpfexzguhox Ad Njb

Condition: good (used), mileage: 562,300 km, power: 397 kW (539.77 HP), first registration: 02/2021, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2021, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, onboard computer, parking air conditioner, parking heater, retarder, spoiler, = Additional Options and Equipment = - Rear work lights - Front work lights - High beam - Windscreen - Enclosed cab - Cab - Tipping hydraulics - Sleeper cab - Sideskirts - Auxiliary heater - Pre-heating system - Power Take-Off (PTO) = Notes = Scania S540 Highline 4x2 – PTO/Hydraulic – Night climate control – Retarder – Full specification MY: 16-02-2021 Mileage: 562,300 km YS2S4X20005609705 Full spec truck PTO & hydraulics 2x tanks Night climate control Full air suspension LED Navigation Leather Etc. = Further Information = Technical Information Number of cylinders: 6 Transmission Gearbox: Opti Cruise, 12-speed, automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60% Weights Unladen weight: 8,962 kg Payload: 10,538 kg Gross vehicle weight (GVW): 19,500 kg Functional Body brand: Scania Condition Nwodpfxox E Sl Aj Ad Nsb Technical condition: good Optical condition: good

Condition: used, color: red, Year of construction: 1981, operating hours: 4,391 h, Tank pressure: 11 bar Njdpfxsx S Nxas Ad Newb

Condition: used, Year of construction: 1999, workpiece weight max. 2000 gr Used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. Nwodjydfntopfx Ad Nsb The device has been checked and repaired by the manufacturer During repair we exchanged weight cell and control.

Condition: excellent (used), mileage: 884,128 km, power: 353 kW (479.95 HP), first registration: 06/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fridge, parking air conditioner, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Adaptive cruise control - ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road) - Aluminum fuel tank - Heated mirrors - Brake booster - Roof spoiler - Differential lock - Remote central locking - High beam - Speed limiter - Particulate filter - Radio/CD player - Sleeper cab - Sun visor - Toolbox - PTO (power take-off) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: ZF, automatic Axle Configuration Brakes: disc brakes Front axle: alloy rims; steered; tire tread left: 30%; tire tread right: 30%; suspension: leaf spring Rear axle: differential lock; alloy rims; tire tread left: 30%; tire tread right: 30%; suspension: air suspension Weights Unladen weight: 8,010 kg Payload: 19,000 kg Gross vehicle weight: 27,010 kg Condition Technical condition: very good Visual condition: very good Nwedpfx Adsx N Twbo Nob Damages: none Financial Information Price: on request Additional Information Please contact Luc Schoefs or Germain Daenen for further information.

Condition: ready for operation (used), A good used Loma Lock Metal Detector complete and tested Insight C5 Waferthin (Throat) Metal Detector Requiring less than 200mm of installation space, the INSIGHT C5 is specifically designed to be located between multihead weighers and bagmakers where its stability to vibration delivers class leading performance and sensitivity to all metal types Designed to set new standards for good manufacturing practice - in particular, traceability, efficiency and product quality, Nwsdpfx Aew H Dp Ned Neb Integrated Digital Search Head and DDS vector display Best in class sensitivity to magnetic and non magnetic metals Unique search head construction is stable to extreme vibration and product signal External USB port Menu with multi language options User friendly operation with auto-learn feature INSIGHT C5 detector heads are sealed to IP66 (NEMA 4X) Ready to ship worldwide We will provide export documentation and shipping if required

Condition: excellent (used), Ecoca SJ-30HT, 3 Jaw Chuck, Tailstock, Nwjdpfx Aowx Hnfod Neb Toolarm, Year 2007 Control Fanuc 18-T Swing over bed 580 mm Swing over cross slide 434mm Max turning diameter 280mm Max turning length 460mm (centers) Chuck size 254mm (10") Bar passage (bore) 90mm or 75mm (SJ 30G) Spindle 3500–4200RPM; 25–30Hp / 11–15kW Spindle nose A2 8 Spindle bore 90mm (through hole) X-axis travel 190mm Z-axis travel 520mm Rapid traverse X/Z 15m/min (X), 20m/min (Z) Tool turret 12 station hydraulic Curvic coupling Quill (tailstock) 90mm dia, taper MT 5, 120mm travel Spindle motor power 25/30Hp (18–22kW) Electrical power 40kVA supply Coolant tank147L Footprint 4460×1920mm Net weight 5000kg

Condition: used, Year of construction: 1992, operating hours: 2,275 h, Air compressor    • Working pressure: 8 bar    • 2275 operating hours Nwjdpfx Adsx E Tnfj Njb    • Road lighting    • Fully operational Condition: Used Year of manufacture: 1992

Condition: like new (used), Year of construction: 2018, Shrink Tunnel, Film Shrink Tunnel Manufacturer: Diez Nodpfx Aex Avxrod Newb Model: HTC5030D Year of manufacture: 2018 No operating hours! Pass-through width: approx. 50 cm Pass-through height: approx. 30 cm Overall length: approx. 220 cm 21225

Condition: used, Year of construction: 1981, air compressor Mannesmann Demag    • Working pressure: 12 bar    • Road lighting Nedpfxoxy Ailo Ad Njwb Condition: Used Year of manufacture: 1981

Condition: used, Straight-Cut Cutting Bench 40, manufactured by MEP Number of bars: - n.1 Ø 40 - n.2 Ø 32 - n.3 Ø 26 - n.4 Ø 20 - n.5 Ø 16 22 Fy= 600 N/mm - ft= 650 N/mm Minimum cutting length: 800 mm Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Nedpfx Adsvtx Eye Newb Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5 Minimum cutting length: 800 mm Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5

Condition: good (used), mileage: 854,159 km, power: 338 kW (459.55 HP), first registration: 01/2014, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2014, Equipment: AdBlue, air conditioning, central locking, electric window regulation, onboard computer, parking air conditioner, parking heater, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - High beam headlights - Windscreen - Enclosed cab Nwjdpfoxxky Nsx Ad Nsb - Air suspension - Sleeper cab - Auxiliary heater - Pre-heating system = Notes = Daf XF460 SuperSpaceCab 4x2 - Full air - Night Clima - TV - Microwave - Full spoiler - Navigation MY: 20-01-2014 KM: 854,159 XLRTEH4300G014867 Full specification truck Night clima Full air suspension TV Fridge Microwave Full spoiler = Further Information = Transmission: AS Tronic, 12-speed, automatic Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 8,000 kg; Steered; Left tire tread: 40%; Right tire tread: 40% Rear axle: Tire size: 315/60R22.5; Twin tires; Max. axle load: 12,600 kg; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40% GVW: 20,500 kg Body manufacturer: ZF Technical condition: good Visual condition: good Please contact VAEX The Truck Traders for further information.

Condition: new, Year of construction: 2025, Horizontal CNC Lathe HTC200 II x 560 C2023030141 Working Area: Max. swing diameter over bed: Ø620 mm Max. swing diameter over carriage: Ø410 mm Max. turning diameter: Ø400 mm Max. turning length: 560 mm Spindle center height: 1035 mm X-axis travel: 215 mm Z-axis travel: 615 mm Motorized High-Speed Spindle Max. spindle speed: 4,500 rpm Spindle power (continuous/30 min overload): 11/15 kW Spindle torque: 158/211 Nm Spindle nose taper: DIN55026 A2 6 Spindle bore: Ø66 mm Spindle bearing diameter: Ø100 mm Chuck size: 8 inches Turret Turret type: Servo V12 OD tool size: 25x25 mm Nsdpfx Adew Rpcho Nswb ID tool size: Ø40 mm Indexing time (tool to tool): 0.2 s Tailstock: Tailstock type: Hydraulic Quill diameter: Ø100 mm Quill taper: MT No.5 Quill stroke: 122 mm Tailstock travel: 550 mm Feed Shaft X/Z-axis travel: 215/615 mm Rapid traverse X/Z-axis: 24/30 m/min Type of guideway: Linear guideway X/Z-axis drive power: 1.8/1.8 kW Control System: FANUC 0i-TF Power supply: 35 kVA Coolant capacity: 240 l Machine weight: 4.8 t Machine dimensions (LxWxH, without chip conveyor): 3097x1855x1755 mm Components Control: FANUC X/Z-axis ball screw: PMI (TW) Spindle bearings: NTN/NSK (JP) Spindle ball bearings: FAG (GE) Chuck and cylinder: STRONG (TW) Servo turret: HISION (CN) Main components of pump and valves: NACHI (JP) Main lubrication system components: LIUBIAN (CN) Main electronic components: Schneider

Condition: used, Refrigerant compressors system Bitzer -Type: 4HTC-20KI-40S (x3), 2HHC-2KB-40S (x2) Nwodpfxex Rqu Te Ad Nsb -Volume: 12 m3/h (x3), 4.34 m3/h (x2) -Control cabinet included -Dimensions: 3200 x 870 x 1850 mm -Cabinet dimensions: 2050 x 1200 mm -Refrigerant: CO2 -Items in magazine: 1 -Reference number: Z122 -Condition: Used in very good condition, ready to work

Condition: like new (used), Year of construction: 2016, TECNOMATIC SMART 1 year : 2016 X : 1500-2500 mm Y : 350 mm Nsdpex A T Tyofx Ad Njwb Z : 200 mm

Condition: new, empty load weight: 6,160 kg, maximum load weight: 28,840 kg, overall weight: 35,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, loading space volume: 24 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Schmitz 3-axle steel tipping body | Roll tarp | 24 m³, steel tipping body | Schmitz axles with disc brakes | 1st axle liftable | Tyres: 385/65 R22.5 | Subject to errors, input mistakes and prior sale. Nwjdpfx Ajxlinrjd Nsb

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: silver, Year of construction: 2021, The images are archived; the vehicle may still be in use! Semi-trailer chassis for freight forwarding Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219, 2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping. Axles + Suspension Nwedpfx Ajwhp A Djd Nsb SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension, without lift axle These images are archive images; the vehicle may still be in use!

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm control: Heidenhain TNC 425 spindle taper ISO: SK 40 DIN 69871 quill stroke vertical: 75 mm distance between column - table edge: 190 (fest) vertikal mm spindle head swivable left - right: 90° Vertikal-Spindel ° distance between table/spindle: min./max.: 165/565 Vertikal-Spindel mm distance between table/spindle: min./max.: 165/565 Horizontal-Spindel mm turning speed range: 20 ... 4500 U/min tool changer with: 32 tools (Typ HTC 32) feed:: 1 ... 5000 mm/min Table dimensions: 850x440 mm table swivelabel +/-: nein = starr ° table load: 500 kg total power requirement: 15 kW weight approx.: 3500 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet LxWxH: 1,6 x 0,6 x 1,7 m Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be demonstrated under power. i.D. Nwjdpfxju Nc T Rj Ad Neb *

Condition: like new (used), Year of construction: 2020, Dosing Unit Movacolor MC Balance MC Liquid Stock No.: 503616 Machine/Device Type: Dosing unit for powder and liquid Manufacturer: Movacolor Model: MC Balance & MC Liquid Year of manufacture: 2020 Movacolor Powder & Liquid Dosing Unit Consisting of: Nsdpjw Tayiofx Ad Njwb 2x Movacolor MCTC Touchscreen operator interfaces Movacolor MC Balance powder dosing unit Movacolor MC Liquid gravimetric liquid dosing unit Movacolor MCBC Blindcontroller Movacolor A30 HTC dosing unit Movacolor 12 L hopper The unit was only used once for testing purposes and is therefore as good as new!

Condition: good (used), Year of construction: 2006, Horizon Stichliner SL5500: Gathering towers VAC 60a+m+m+m ST40, Horizon ASF 30, SPF 30 Nodpfx Adovmfxgo Njwb Trimmer HTC 30 Counter reading only 14.2 million

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 1, Electric Concrete Grinders Our concrete and terrazzo grinders are versatile and will meet the expectations of every customer, even the most demanding. The terrazzo grinder is made from the highest quality materials, so you can be sure it will serve you well for a long time. We know that a concrete floor grinder must be efficient and reliable. Our concrete grinders have proven themselves in various situations for our clients. Your satisfaction is our priority, which is why we focus solely on tried-and-tested, recognized solutions. How to grind concrete or terrazzo? Definitely with a grinder from our store! Concrete Grinders – For Dry and Wet Operation They come equipped with a 2.2 kW (also available in 3 kW) / 230V motor, 120 rpm and a cylindrical gearbox. They are adapted for kidney-shaped discs – grinding discs with a diameter of 400 mm or 500 mm. Some models feature a water tank that can also be used to adjust the machine's weight and a quick connector for attaching a water hose. The entire machine is galvanized, features an LED lamp, and adjustable handle for maximum comfort during operation. The concrete floor grinder is also equipped with a safety switch, indicator lights, and two outlets for connecting a vacuum cleaner. In short, it is ideal for use with corundum blocks, diamond segments, and for grinding concrete floors, cleaning, renovating old concrete, and terrazzo polishing. WE MANUFACTURE: Electric concrete grinders by Dekor PUHB Poznań. Disc diameters: 405 or 500 mm. Various grinding discs can be mounted, including Dekor-manufactured ones. Motor: 2.2 kW/230V. Fully electro-galvanized body. Suitable for dry or wet operation. Vacuum cleaner connection possible. Broad handle adjustment. Diameter 405 mm, 120 rpm. Discs not included (sold separately – see our website for prices and photos). We offer a wide range of diamond segments directly from the diamond/segment manufacturer, including diamond segments for bush-hammering floors before resin application, universal disc plates for diamond mounting, etc. Net prices: Grinder SD40 1.5 kW/230V – 6,400.00 PLN Grinder SD40 2.2 kW/230V – 6,900.00 PLN Grinder SD50 2.2 kW/230V – 8,000.00 PLN Grinder SD50 3.0 kW/230V (+ larger gearbox), 56 kg (long handle) – 8,900.00 PLN - Universal disc 400/5, stainless steel – 480 PLN - Disc 500/5, stainless steel – 520 PLN Joint Cutter (4+2 wheels) – 4,100.00 PLN (includes milling cutter) Joint Cutter (2+1 wheels) – 3,150 PLN (includes milling cutter) - Diamond with 4 segments “16”, Ø100 mm, mounted with M8 or M10 screw – 70.00 PLN - Diamond “16”, mounted with 3x M6 screws, 2 rectangular segments – 65.00 PLN - Diamond “16”, mounted with 3x M6 screws, 3 square segments – 70.00 PLN - Diamond “16”, HTC quick-release, with 2 diamonds – 70.00 PLN - Cup grinding disc Ø100 mm, M14 thread, double-row or turbo – 62 PLN - Cup grinding disc Ø125 mm, M14 thread, double-row or turbo – 72 PLN Nwjdpfx Adowt Dqms Njb ALL diamond products are manufactured exclusively for us, to our specifications, by a company specializing in crystalline diamonds who produce the required grinding segments to order. For fastest reply, please contact us by email.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1, We sell diamond tools for grinding concrete, stone, and terrazzo. We manufacture universal stainless steel discs, diameter 500/5 mm, for mounting diamond grinding segments “16”, diameter 100 mm with 4 diamonds (among others), intended for very intensive grinding of hard concretes. We also produce resin-bonded corundum abrasive segments in various types. Nwjdpfxswuwuns Ad Nob The large working surface of the diamonds allows them to be used even in heavy-duty grinders, as well as in our own models: SD50, SD40, and ZDJ60E power trowels, all operating at 230V. ALL diamond tools are manufactured specifically FOR US, to our order, by a company specializing in the production of crystalline diamonds, from which they make the grinding segments we specify. We sell diamond segments (including mounting discs) for grinding. We also offer bush hammer segments (for matting) for substrate preparations prior to applying resin, paint, or tiles. Net prices: – Diamond segment with 4 “16” segments, Ø100 mm, M8 or M10 screw mount – 70.00 PLN (EUR 17) – “16” diamond, 3x M6 screws, 2 rectangular segments – 70 PLN (EUR 17) – “16” diamond, 3x M6 screws, 3 square segments – 70 PLN (EUR 17) – “16” diamond, HTC slide mounting, with 2 diamonds – 70 PLN (EUR 17) – 100 mm cup wheel, M14 thread, double-row or turbo – 62 PLN (EUR 15) – 125 mm cup wheel, M14 thread, double-row or turbo – 72 PLN (EUR 17) – “V” diamond milling cutter, Ø180 mm – 540 PLN (EUR 129) – “V” diamond milling cutter, Ø125 mm – 198 PLN (EUR 47) – Diamond milling cutter, Ø200 mm – 470 PLN (EUR 112) – Complete stainless steel bush hammer head with double-row wheel – 160 PLN (EUR 38) – Complete stainless steel bush hammer head with triple-row wheel, Ø50 mm – 220 PLN (EUR 52) – Replacement double-row bush hammer wheel with bearings – 120 PLN (EUR 29) – Replacement triple-row bush hammer wheel with bearings, Ø50 mm – 160 PLN (EUR 38) – Universal stainless steel disc 400/5 – 480 PLN (EUR 114) – Universal stainless steel disc 500/5 – 520 PLN (EUR 124) – “Kidney” resin pad for heavy grinding – 40.00 PLN (EUR 10) – Grinding block, two M6 screw mount (corundum-resin) – 40 PLN (EUR 10) – Corundum/resin block 80x160x100 mm high (grains 1-3 mm; 3-5 mm; 5-8 mm) – 120.00 PLN (EUR 29) – Corundum-resin stone, grains 1-3 mm; 3-5 mm; 5-8 mm. Approx. weight 6 kg, size 100x100x270 mm – 190.00 PLN (EUR 45) Prices are subject to change. All listed items are in stock in Poznan and can be shipped COD or by prepayment, as well as collected in person from Poznan. Please feel free to contact us by email. We operate 24/7.

Condition: used, Year of construction: 2006, total height: 1,750 mm, total length: 2,790 mm, total width: 1,570 mm, Empty weight: 4.300 kg Price: On request - Year: 2006 - Documentation available: Yes - CE certificate present: No - Serial number: GN08201038G - Drive system: CNC - Control system brand: Fanuc - Control system type: 0i-Mate TO - Power [kW]: 15.0 - Swing over bed [mm]: 250 - Distance between centres [mm]: 460 Nwjdpfowfpaqex Ad Neb - Spindle bore [mm]: 62 - Max. spindle speed [rpm]: 4500 - Options: Removable bed - Swing over removable bed [mm]: 460 - Transport dimensions: 2790mm x 1570mm x 1750mm (l x w x h) - Transport weight [kg]: 4300kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 1,800 rpm, spindle motor power: 37,000 W, total height: 2,500 mm, overall weight: 21,000 kg, controller manufacturer: FANUC, controller model: oi-TC, number of axes: 2, This SMTCL HTC 63300 was manufactured in 2007. A robust horizontal turning machine featuring a swing diameter over bed of 810 mm and over saddle of 580 mm. It includes a 500 mm chuck, a spindle speed range of 50 - 1800 rpm, and an auto turret with 12 tool positions. Ideal for handling large workpieces with its 3000 mm distance between centers. Contact us for more information about this machine. Nwedpjyaiq Refx Ad Neb Machine Benefits Technical Machine Benefits • Distance between centers: 3000 mm • Spindle nose: asa 11” a2 • Chuck size: 500 mm • Bar capacity: 125 mm • Type: auto turret with 12 tool positions (32 mm tools) • Tailstock travel: 120 mm Extra Information Machine still under power Dimensions Machine Depth 6390 mm

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Nwjdpfxjl Dvx Es Ad Nsb Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant