Used Hss for sale (257)

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm work piece dimensions: work piece lenght 200 – 1500 mm work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm Hedpfedcdwbex Acvjk The machine is supplied with the following components: - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller - rubber coated outfeed roller - digital display of thicknessing height Hodpecq E Uuefx Acvek - autom. star triangle switch techiscal data: total planer table lenght 2250 mm max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: repair required (used), Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 810010241, For sale is a 350-Combi CNC tool grinding machine from the Swiss manufacturer Agathon, built in 2000. Hjdjyq Npbepfx Acvok This machine is a proven CNC tool grinder for the precise machining of carbide and HSS tools. It is ideal for regrinding, profile, and form grinding applications. The machine is in used condition and is only partially operational. It was taken out of service due to a production shutdown and is expressly offered as in need of repair or overhaul. Commissioning should be carried out by qualified personnel. Therefore, the sale is preferably intended for specialist companies, dealers, or for spare parts use. Viewing is possible by appointment. The sale is made under exclusion of any warranty. If you are interested or have any questions, we look forward to your inquiry.

Condition: new, Bernardo Abricht - and thick-planing machine ADM 300 - 400 V/ 3.0 kW Technical specifications Abrichthobel Dressing width 305 mm Table length 1510 mm Table height 915 mm Planing shaft speed 5500 rpm Planing knife 4 pcs. Planshaft diameter 78 mm Dressing stop 1105 x 155 mm Dressing stop swivel90° to 45° Max chip removal 3 mm Dickenhobel Table length 585 mm Planing width 300 mm Thickness pass min./max. 3 - 220 mm Max chip removal 3 mm Feed speed 6.6 m/min Suction connection of 100 mm Engine power S1 100% 3.0 kW (4.0 hp) Hedpfx Aod N S U Tecvsk Engine recording power S6 40% 4.2 kW (5.7 hp) Voltage 400 V Machine dimensions (L x W x H) 1700 x 790 x 1080 mm Weight approx. 280 kg Properties • Foldable dressing tables for quick switching to the thickness planer • Intergrated foldable chip ejection hood - connection diameter 100 mm • Both dressing tables with fine adjustment and noise-insulating table lips • Maintenance-free 4-knife shaft with planing knife in HSS-18% quality • Spiral toothed feed roller for safe and uniform workpiece feed • Flat-precise thickness planing ducrh thickening table with central column guide and support • Side-guided breakstop, so that the machine can be placed directly on the wall • Standard with hobble knife adjustment gauge for optimal adjustment of the planing knives • Powerful drive motor with high power reserves Delivery • HsS-quality planing knives • Planing knife adjustment gauge •

Condition: new, Year of construction: 2026, Sawblade width max. 120 mm Weight 350 kg Motor output 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding. Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. Hodpfoyk Ib Aex Acvek - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80*120*175cm - Net/gross weight 350/375kg PNK-AB General Features: - Automatic grinding of band saw blades up to 120mm width. - Grinding wheel riding on linear rails. - Non-corroding and hardening plating on all mechanical components. - On/off switch. - Max 60mm tooth pitch. - Ease of use. - Minimum space required. - Fast and precise grinding of NV,PV and KV tooth forms. - Manual central lubrication. - Manual saw holder and blade lifting system. - Optional circular(HSS) and gang saw grinding attachments. - Production conformed with CE standards Capacity: Grinding up to 30 band saws per day. Optional supplements: - CBN Woodmizer wheel nett price EUR 375,- - Diamond wheel for Bimetal nett price EUR 520,- - Bakelite wheel 13mm nett price EUR 75,- - Ceramic wheel 16mm nett price EUR 115,- - CBN grinding wheel nett price EUR 1.125,- - Spare Index Finger nett price EUR 70, - Index finger pin nett price EUR 20,- - Wheel dresser attachment nett price EUR 1.170,- - Wheel dresser diamond nett price EUR 100,- - Circular (HSS) saw grinding attachment nett price EUR 960,- - Frame saw grinding attachment nett price EUR 2.700,-/1meter - Coiler and uncoiler system for band saw manufacturers nett price EUR 5.800,- - Sealed packing nett price EUR 570,- - Attachment for double side saws nett price EUR 1.560,- - Pneumatic system for second indexing finger nett price EUR 1.140,- - CAM for GD tooth profile (WM) blades nett price EUR 330,-

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. Hedpfx Acsv Dkvrjvok We are happy to offer you commissioning and training on site.

Condition: ready for operation (used), saw blade diameter: 400 mm, For Sale: KALTENBACH Circular Saw for Aluminium and Non-Ferrous Metals Model: SKL 400 H Saw blade diameter: Ø 400 mm Cutting range at 90° round material: 130 mm Square material: 120 mm Profile width: 315 x 40 mm Hsdpfx Acsyhqdusvek 45° profiles (horizontal): 220 x 60 mm Profiles (vertical): 80 x 120 mm Cutting speeds for HSS and carbide saw blades: 1300 / 3000 m/min For carbide saw blades: 1750 / 3500 m/min Drive motor 1430 / 2880 rpm: 3.7 / 4.5 kW Saw blade feed rate steplessly adjustable: 0 - 1100 mm/min Saw blade rapid return: 3000 mm/min Machine weight: 650 kg Dimensions (W x D x H): 1000 x 1300 x 1950 mm

Year of construction: 2023, operating hours: 5 h, condition: like new (used), functionality: fully functional, cutting length (max.): 105 mm, number of blades: 12, rotor diameter: 300 mm, machine/vehicle number: 20711, GETECHA Granulator / Beside-the-press Grinder (Version A 2.2.2) Application: Professional beside-the-press or small central granulator for recycling sprues and medium-sized plastic parts. Features an elevated frame for easy material discharge into bags or containers. Hedpfxsyv A A Te Acvek Technical Specifications: Cutting System: Rotor diameter: 300 mm Cutting length: 105 mm Number of rotor knives: 10 (HSS) Number of stator (fixed) knives: 2 Cutting type: Scissor-cut geometry (reduces dust, noise, and energy consumption) Rotation speed: approx. 230 rpm Performance: Throughput: approx. 80 kg/h (depending on material and screen size) Screen: 6 mm (round perforation) Drive & Power: Motor power: 5.5 kW Electrical supply: 3 x 400 V + N, 50 Hz Dimensions & Weight: Chamber inlet opening: 450 x 335 mm Weight: approx. 420 kg Finish: RAL 7035 (Grey) / RAL 5015 (Blue) Configuration Features (Version A 2.2.2): High-Stand Design: Elevated frame construction for ergonomic material discharge. Manual Feed Hopper: Sound-insulated hopper with a large inlet opening (450 x 360 mm). Discharge System: Gravity outlet optimized for regrind bags or collection bins. Key Advantages: Superior Cutting: The 10-blade scissor-cut rotor ensures high-quality regrind with minimal fines. Easy Maintenance: Quick-access design for fast sieve changes and blade adjustments, ideal for frequent material or color changes. Wear Protection: Optional wear-resistant coating available for processing glass-fiber (GF) reinforced materials.

Year of construction: 2023, operating hours: 5 h, condition: like new (used), functionality: fully functional, cutting length (max.): 75 mm, number of blades: 8, rotor diameter: 180 mm, machine/vehicle number: 20710, GETECHA Beside-the-Press Granulator / Plastic Grinder Model: Series A 5.10.1 (Compact Granulator) Application: Immediate recycling of sprues and rejected parts, designed for beside-the-press operation or small central grinding tasks. Technical Specifications: High-performance German-engineered granulator characterized by a robust design and high-precision cutting geometry. Engineered for low-noise and low-dust material processing. Cutting System: Rotor diameter: 180 mm Cutting length (blade length): 75 mm Number of rotor knives: 7 (HSS quality) Hodpfx Asyv Avgocvok Number of stator (fixed) knives: 1 Rotor speed: 270 rpm (optimized for material quality and noise reduction) Performance & Sieve: Maximum throughput: Up to 35 kg/h (depending on material type and screen size) Screen: 6 mm standard (round perforation) Drive & Power: Motor power: 2.2 kW Power supply: 3 x 400V +N, 50Hz Inlet Dimensions: Cutting chamber inlet: 285 x 200 mm Manual feed hopper inlet: 337 x 310 mm Configuration & Features (Version A 5.10.1): Hopper: Specially sound-insulated hopper designed for manual feeding. Mobility: Mobile unit mounted on four casters (two equipped with parking brakes). Material Collection: 5-liter regrind bin featuring a left-side suction port (ø 38 mm) for direct connection to a vacuum conveyor/loader. Finish: Original GETECHA industrial coating in RAL 7035 / RAL 7011. Key Advantages: Versatility: Suitable as a dedicated beside-the-press unit or a small central granulator for technical parts. Durability: Equipped with HSS rotor knives for extended service life; optionally available in a reinforced version for glass-fiber (GF) reinforced plastics. Maintenance Friendly: Superior accessibility for rapid cleaning, sieve changes, and knife adjustments, minimizing downtime during material/color changes.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1595 € 23 mm 19 mm Weldon 1.6 kW M20 266 mm 259 mm 500 mm 17 kg 23 mm 50 mm 75 mm 190 mm 160 - 250 / 390 - 580 U/min 8 mm The PRO-52T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes Hodsyrht Iepfx Acvek • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base (ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash Settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”)Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 6 mm hex wrench • 5 mm hex wrench with a handle • 2.5 mm hex wrench • 8 mm combination wrench • Tool can • Operator’s Manual OPTIONS (PRICES ON REQUEST): Pressure cooling system 2 lt Vacuumpad Compressed air ecjector Pipe attachement

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1995 € 25 mm 19 mm Weldon 1.6 kW M20 266 mm 259 mm 505 mm 18 kg 25 mm 70 mm 75 mm 190 mm 120-190 / 290-450 U/min 8 mm The PRO-72T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool type. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials Hedpfx Acjyrhrwovek • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT3 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 5 mm hex wrench with a handle • 4 mm hex wrench • 2.5 mm hex wrench • 8 mm combination wrench • Operator’s Manual OPTIONS (PREISE AUF ANFRAGE): Pressure cooling system Pipe adjustment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 995 € 23 mm 19 mm Weldon 1.15 kW 331 mm 254 mm 456 mm 155 kg 23 mm 50 mm 50 mm 160 mm 240 / 480 U/min 6 mm PRO-50 featuring purpose designed motor and 2-speed gear box 240/480 rpm is optimized to provide appropriate speed for work with HSS cutters up to ? 45 mm and twist drills up to ? 23 mm. Rigid construction, optimized by means of FEA (finite element analysis) software extends tool life and enables depth of cut up to 75 mm. Compact design along with innovative smart magnet with reduced weight make it a lightweight machine. PRO-50 provides maximum holding power on thin materials thanks to Magnetic Field Shape Control (MFSC). The drill protects both the machine and the operator from work on too thin work piece by means of Magnetic Power Adhesion Control (MPAC). PRO-50 is also equipped with Energy Saving Base (ESB) that uses only 50% of its power when motor is not running. Features and benefits: • Compact design with excellent ratio weight/power • Purpose designed motor • Motor Speeds 240/480 rpm (under load) • Spindle equipped with MT2 • Innovative smart magnet with reduced weight • Rigid design to extend tool life • Large stroke enables the use of long tools Hsdpeyrhp Nefx Acvek • Motor cable with additional protective cover • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and the operator from work on too thin work piece • Energy Saving Base (ESB) uses only 50% of its power when motor is not running Standard shipping set: • Drilling machine • Plastic box • Handle (3pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling system hose • MT2 drift • 2.5 mm hex wrench • 5 mm hex wrench • 5 mm hex wrench with a handle • 8 mm combination wrench • Operator’s manual OPTIONS (PRICES ON REQUEST): Pipe adjustment Pressure cooling system Vacuumpad Vackuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1055 € 12 mm 19 mm Weldon 1.1 kW Hsdpeyrhp Aofx Acvek 400 mm 126 mm 185 mm 10 kg 12 mm 40 mm 40 mm 45 mm 370 U/min 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank. Features&benefits: • Low profile mag drill of 185 mm height only • Ultra-strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design of just 10 kg • Milling capacity up to 40 mm with annular cutters • Accepts also twist drills with 19,05 mm (3/4”) Weldon shank • Extended stroke of 45 mm allows up to 40mm depth of cut • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Integrated swarf guard • Detachable feed lever (feat. ratchet) can be fixed from either side • Lifting handle for easy transportation • Cooling with a bottle Standard set includes: • Drilling machine • Plastic box • Handle • Pilot pin 6.34 x 102 mm for HSS cutters • Pilot pin 7.98 x 103 mm for TCT cutters • Safety strap • Hex wrench 4 mm • Operator’s Manual OPTIONS (PRICES ON REQUEST): Cutter extension Coolant bottle with nozzle 250ml

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen Hsdpfx Acjyrhppsvjk 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Year of construction: 2017, condition: new, Countersink Curly Head DIN 335 B 80 HSS Length 200 mm diameter 90 mm Hodpef Ett Iofx Acvok Weight 2,4 kg

Year of construction: 2014, condition: excellent (used), Tap Make Emuge HSS - NE 2 Hsdpfx Aofhdwpecvsk M 80 x 3

Condition: new, The FSM 14 S Tool Grinder by KNUTH is a robust machine designed specifically for the precise and cost-effective grinding of HSS and carbide milling cutters, ranging from 4 to 14 mm in diameter. This handy milling cutter grinder series stands out for its user-friendly operation, making it an ideal choice for any tool crib, where efficient tool maintenance is essential. The FSM 14 S features the capability to grind 2, 3, and even 4-blade cutters, with an additional station available for outer spiral cutting edge grinding. Included in the package are collets tailored for common cutter diameters—4, 6, 8, 10, 12, and 14 mm—along with high-quality grinding wheels that enhance your workflow. This machine ensures rapid tooling and quick setup, enabling you to maintain your tools effectively. Invest in the FSM 14 S Tool Grinder today and elevate your tool sharpening capabilities. Request a quote for this reliable Tool Grinder and ensure your cutting tools are always ready for use. Hodpfop Dtx Uox Acvjk

Condition: used, functionality: fully functional, overall weight: 9 kg, Used finishing and roughing cutters 1 pc. finishing cutter Hedpfxoxv S D Ds Acvjk DIN 1880 HSS Cross and longitudinal keyway Ø 100 mm Height 50 mm Bore Ø 32 mm 1 pc. finishing cutter DIN 1880 HSS Cross and longitudinal keyway Ø 90 mm Height 35 mm Bore Ø 27 mm 3 pcs. finishing cutters DIN 1880 HSS Cross and longitudinal keyway Ø 75 mm Height 35 mm Bore Ø 27 mm 1 pc. finishing cutter DIN 1880 HSS Cross and longitudinal keyway Ø 50 mm Height 36 mm Bore Ø 22 mm 1 pc. roughing cutter DIN 1880 HSS Cross and longitudinal keyway Ø 50 mm Height 50 mm Bore Ø 28 mm 1 pc. roughing cutter HSS Cross keyway Ø 100 mm Height 50 mm Bore Ø 32 mm 1 pc. roughing cutter DIN 1880 HSS Cross and longitudinal keyway Ø 90 mm Height 35 mm Bore Ø 27 mm 1 pc. roughing cutter HSS Cross keyway Ø 80 mm Height 45 mm Bore Ø 27 mm

Condition: used, Multi-wedge broach, hexagonal broaching tool, broaching tool, broach, special tool, grooving tool, grooving machine, slotting machine, slotting machine, slotting tool, slotting broach -Manufacturer: SWZ, broach, impact broach -Type: SW 19 1TGL 29-16600/02 20/50 HSS -Item no.: 440 0432 08 102 04708 -Width: Hexagonal 19 mm wrench width, see photos -Quantity: 1 piece available -Total dimensions: 950/22/22 mm -Weight: 1.7kg Hodpfxjitt R Ss Acvsk

Condition: good (used), Radius cutter, milling cutter Hodpfx Acob A Spyovsk -Finishing cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS -Quantity: 17 pieces -Sale/Price: complete -Weight: 5 kg

Condition: used, Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill shell end mill Hodoh Tk D Topfx Acvsk -Type: H 40Ø x 20 x 16 H C7 Sp.224mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Dimension: Ø 40 x 20 x 16 mm -Weight: 0.1 kg

Condition: used, Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters Hodpfxeh Tk Ddj Acvjk -Manufacturer: Garant, shell end mill, shell end mill, 2 pieces -Type: H 75Ø x 35 x 27 mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Price: complete -Dimension: Ø 75 x 35 x 27 mm -Weight: 0.7 kg/pc.

Condition: used, Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Rix, RIX-HSS saw blade with SK40 mount -Size: 350xx3x32mm -Number of teeth: 96 teeth -Dimension: Ø 350 x 175 mm Hedemdygfopfx Acvek -Weight: 4.2 kg

Condition: good (used), Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-edged -Diameter: 28-40 mm -Recording: MK3 Hsdocbyzvspfx Acvjk -Type: HSS -Quantity: 37 pieces -Sale/Price: only complete set -Weight: 50 kg

Condition: used, Engraving cutters, burin cutters, end mills, end mills, milling cutters -Incl. Packaging: 18 kg cutter -different diameters Hedpfx Ajb Iqgpecvek -Material: HSS, SS, carbide, others -is only sold complete -Weight: 18 kg