Used Hose Crimp for sale (2,543)

Condition: used, Year of construction: 1990, Technical details: total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Crsdeu Nv Dpepfx Aqvji Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Condition: new, operation weight: 355 kg, Year of construction: 2024, Bucher Polyx RC28 with neoprene scraper blade (clearing width at 30°: 2470 mm) Year of manufacture: 2024 Condition: NEW Net price: 8,500 EUR Gross price: 10,115 EUR Equipment: - Single-blade snowplow in a robust, lightweight design, blade made of polyethylene - Powder-coated plow frame made of steel - HD lifting and lowering mechanism - HD pivoting mechanism via two hydraulic cylinders - Hydraulic hoses complete with hydraulic couplings - Pivoting damping valve - Snow dust protection - Patented neoprene scraper blade (RC version) - Plow contour lights LED - Support leg - Mounting plate (plow side) - Mounting hook, size 3 - Curb protector - Boundary flags and warning marking Offer subject to change. Errors, modifications, and prior sale are reserved. All information without guarantee. Our general terms and conditions apply. Location: Peter Meineke Becklinger Str. 17 29683 Bad Fallingbostel-Dorfmark Credpfx Aoxxyv Hjqvsi Inspections and/or test drives only by prior appointment. Please coordinate by phone before arrival, as the vehicle/machine may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Cjdpfx Aeyrqpfeqvjri Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: excellent (used), Airless spraying unit Brand: GRAO Model: H 32 Crjdpfx Asy I T Hajqvsi Hose length: 15 meters

Condition: used, Year of construction: 2018, mileage: 88,863 km, power: 170 kW (231.14 HP), first registration: 06/2018, overall weight: 15,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 11/2028, gearing type: mechanical, emission class: euro6, loading space volume: 6 m³, Equipment: ABS, air conditioning, Internal vehicle number: G400141 Available immediately at our yard in Kaufungen. More information: Luis Lucena Viktoria Sologubova GERMAN Mercedes-Benz ATEGO 1323 4x2 Sweeper Truck Bucher Cityfant 6000 German municipal vehicle with a Bucher-Cityfant-6000 street cleaning unit, 6 m³ stainless steel hopper, separate JCB mounting engine, and extensive safety and comfort features. Vehicle data: * Vehicle number: G400141 * Vehicle condition: Used * Category: Sweeper truck / Municipal vehicle * First registration: 06/07/2018 * Year of manufacture: 2018 * Mileage: 88,863 km * Fuel type: Diesel * Engine displacement: 5,132 cm³ * Power: 170 kW (231 hp) * Transmission: 8-speed manual transmission * Emission standard: Euro 6c * Environmental badge: 4 (Green) * Wheel arrangement: 4x2 * Axles: 2 * Permissible total weight: 15,000 kg * Unladen weight: 9,150 kg * Payload: 5,850 kg * Color: White * Seats/doors: 2/2 * MOT: new upon purchase Crsdpfx Aqey I Hfpsvsi * Inspection: due 01/2027 * 1 previous owner Dimensions: * Length: 6,400 mm * Width: 2,550 mm * Height: 3,300 mm Street cleaning unit: * Manufacturer: Bucher Municipal AG * Type/trade name: Cityfant 6000 * Serial number: SEQ 8869 * Year of manufacture: 2018 * Hopper: 6.0 m³ * Stainless steel hopper * Hopper tilting angle: approx. 55° * Stainless steel dirt chute * Observation flaps left and right * 4-inch dirty water drain * Hopper drainage * Air shut-off valve on the suction hose * A-coupling on the air duct sieve * Multi-stage, pneumatically operated safety support * Exhaust routing through the hopper superstructure Mounting engine and sweeping technology: * Separate JCB mounting engine * Engine type: 444-TA4-55 * Power of mounting engine: 55 kW * Separate fuel tank for the mounting engine: 150 liters * Infinitely variable engine speed control * Hydraulic fan drive * Hydraulically driven roller and disc brush * Coated steel suction nozzle * Suction hose diameter: 250 mm * Swiveling tail wheels * Automatic lifting of the sweeping unit when reversing * Work lights on the sweeping unit Recorded operating data of the superstructure: * Operating hours mounting engine: 309 hrs * Operating hours superstructure: 416 hrs * Operating time sweeping unit: 335 hrs 35 min * Operating time disc brush: 316 hrs 27 min * Operating time roller brush: 85 hrs 41 min * Operating time suction fan: 334 hrs 09 min * Documented sweeping distance: 4,189 km * All values according to the display of the Bucher control terminal Water system and operation: * Stainless steel water tank: 1,900 liters * Water level indicator * Bucher Municipal instrument panel * 7-inch color display * Multi-function display * Standard control panel * Cable remote control * Warning lights and flashing beacons Chassis and equipment: * Right-hand drive * Air conditioning * Driver's air suspension seat * Electric windows * Electrically adjustable exterior mirrors * Additional thermal insulation * Radio * Cruise control * Active Brake Assist * Lane Keeping Assist * ESP * Differential lock on the rear axle * Engine brake * Speed limiter * Reversing warning * Daytime running lights * Fleetboard vehicle computer * Short ClassicSpace cab * Parabolic suspension front * Front axle 5.3 t * Pre-wiring for external bodywork * Flashing beacons * Steel rims Tires: * Tire size: 10 R 22.5 * Axle: Aeolus, tread depth approx. 13 mm * Axle: Pirelli, left approx. 7 mm, right approx. 11 mm Inspection and functional test possible after prior appointment. Further information, photo

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle Codpfx Aovvvrpoqvsri incl. 10 m nozzle hose i.D. *

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space volume: 15 m³, total length: 10,200 mm, total width: 2,500 mm, total height: 3,940 mm, suspension: air, tire size: 275/75R22,5, wheelbase: 7,020 mm, color: white, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = The Wattsnew E-Box concrete mixer is an electrically powered concrete mixer. The drive unit (E-Box) is installed in place of the diesel engine and powers the existing hydraulic pump as usual. Everything remains the same, except that the hydraulic pump is driven by an electric motor instead of an internal combustion engine. You can also easily convert your existing concrete mixer trailer to electric power by removing the diesel engine unit and installing the E-Box. Thanks to its intelligent software, the E-Box consumes little power and is extremely easy to operate. With just one button and one lever, you control the entire system. Charging is also very easy. After a day's work, simply connect the E-Box to a charging station or a standard power outlet, and the batteries will be fully charged in five hours. The Wattsnew E-Box is completely emission-free. This means no air pollution from diesel emissions, so you can work in a clean and safe environment. Your neighbors will also appreciate that you are using an emission-free and quieter machine. The use of electric vehicles and machines in the construction industry increases the chances of winning contracts. Customers and governments are increasingly demanding emission-free machines. Crodpfxexv Ry Rj Aqvsi For more information: / = Further Information = General information Year of manufacture: 2024 Design year: 2024 Applications: Construction and road construction Usable material: Concrete License plate: OT-93-FF Axle configuration Tire size: 275/75R22.5 Suspension: Air suspension Rear axle 1: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Steerable; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 2: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 3: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Steerable; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Weights Unladen weight: 11,440 kg Payload: 31,560 kg GVWR: 43,000 kg Functional Brand of body: Stetter AM 15000 Number of chambers: 1 Water installation: Yes Water tank: 500 l Hoses: Yes Condition Overall condition: very good Technical condition: very good Optical condition: very good Financial information Price: On request = Company Information = You can find our complete range here: /

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning, including intensive and large-scale projects. The main advantage of this unit is its minimal reliance on new-generation electronics. It is one of the most powerful machines available on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, Complete with the Following Equipment: - COLD JET AERO 75 DX DRY ICE (only 12 operating hours) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) One of the best machines worldwide. No electronics inside, making it highly reliable and affordable to maintain. Credpfxswg R Eds Aqvsi For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold include a 1-year warranty. We offer repairs and maintenance for Cold Jet machines. New Cold Jet machines are also available through us. Contact us for more details. Worldwide Shipping Available. Keywords: Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: excellent (used), mileage: 252,923 km, first registration: 08/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Media system - Particulate filter - Sleeper cab - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication = Additional Information = General Information: Usable material: Concrete Technical Information: Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 9,637 kg Axle Configuration: Front axle: Steered Rear axle 1: Dual tires Rear axle 2: Dual tires Functional: Superstructure manufacturer: DE BUF ST2 2-AXLE 10M3 CONCRETE MIXER High-pressure pump: Yes Water installation: Yes Water tank: 685 l Hoses: Yes Condition: Technical condition: Very good Optical condition: Very good DAF CF 510 6X4 TRACTOR UNIT WITH 2-AXLE SEMI-TRAILER WITH DE BUF 12 M3 CONCRETE MIXER EURO 6 L PACKAGE 510 HP DRIVE 6X4 Credpjwhpvkofx Aqvsi AIR-SUSPENDED WHEELBASE 320 CM CF SLEEPER CAB WITH AIR CONDITIONING AND FRIDGE MANUAL TRANSMISSION ENGINE BRAKE 252,923 KM DE BUF 2-AXLE SEMI-TRAILER WITH 12 M3 CONCRETE MIXER 2 AXLES SAF AXLES LAST AXLE STEERABLE DRUM VOLUME 12 M3 2X WATER TANK CAPACITY 625 L CAPACITY 60 L WATER HOSE CENTRAL LUBRICATION SYSTEM FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES WE HAVE FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, This listing is for the Nilfisk GM80 Vacuum Cleaner The unit is in full working condition and is ready for immediate use Durable construction: Features a rugged aluminium or steel container and chassis—nearly indestructible and ideal for heavy-duty industrial or commercial use Mobile & adaptable: Mounted on a steel trolley with large rubber wheels for smooth movement over cables, thresholds, and facility flooring Powerful suction: Equipped with a 780 W (or up to 1,200 W in some “P” models) motor, it offers strong airflow for deep cleaning tasks GM80 Museum/Variable Speed – Offers adjustable suction (0–87 CFM); ideal for delicate cleaning like artifacts, books, pharmaceuticals Notable Features Filter versatility: Fits paper or fleece bags; choice of washable/wear-resistant filters; add HEPA or ULPA exhausts for fine dust Motor protection: Thermal cut-off shuts down motor in event of blockage or filter clogging Crsdpfsxhf Adex Aqvji Hose & tool kit: Adjustable suction & specialized attachments: Variable-speed models allow airflow control; cleanroom setups use conductive hoses for ESD safety

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: Csdpfx Asxgumcoqveri - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: new, Seppi M. KASTOR hyd to / Stump Grinder / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €26,290.00 net / €31,285.10 gross - Cutting disc width: 0.11 m - Cutting disc diameter: 0.90 m - Overall width: 0.88 m - Depth: 1.80 m - Height: 1.30 m - Weight: 868 kg - Stump grinder for excavator mounting - For removing stumps and tree roots - Grinds tree stumps and roots up to 50 cm deep - For excavators from t - For mounting on various adapter plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier device - Indirect double V-belt drive with 2x5 V-belts - Hydraulically adjustable hood - Protection by double chains - Rotor with 50 fixed, carbide-tipped tools - Color: red RAL3020 · anthracite RAL7021 OPT 074 Two axial piston hydraulic motors F12-80 cm³ with overpressure valve - Displacement in cm³: 2 x 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate in l/min (min-max): 140 – 220 An autonomous hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse that are immediately available! Please contact us for this at . Codpfx Aeznru Tsqvjri Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale reserved! = Further information = Unladen weight: 868 kg Please contact Marius Herden for more information.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, inverter welding machine -Manufacturer: Ess, MIG/MAG gas-shielded welding machine -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control Cjdpfx Aezrt E Ueqvori -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Condition: new, power: 316 kW (429.64 HP), first registration: 07/2023, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, loading space volume: 20 m³, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - PTO = Notes = Fuel tank: 290 liters Air conditioning Crjdpfezn U Hxox Aqvsi Equipped with a Ravasini fuel tank with a capacity of 20,000 liters. Three compartments (6,800 l + 6,500 l + 6,800 l + expansion volume) Manhole with cover, 500 mm diameter, complete with inlet and breathing valve, and including a collection basin in case of liquid spillage from the manhole. Pumping unit housed in a suitable stainless steel box, positioned on the rear side of the vehicle. Positive displacement pump, 500 l/min. Liter counter with a flow rate of 550 l/min, complete with filter, degasser, check valve, with a positive displacement head providing partial measurement with 5 resettable digits and total measurement with 7 non-resettable digits. Manually operated hose reel with 20 m of 1.5-inch hose and delivery gun. = Further Information = General Information Year of construction: 2023 Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Transmission Transmission: ZF16TX2240TO, automatic Axle Configuration Tire size: 315/80R22.5 Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 13,400 kg Payload: 20,100 kg GVWR: 33,500 kg Functional Body manufacturer: Ravasini Number of compartments: 3 Pump: Yes Hoses: Yes

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 10/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible Cjdpsy R Ipnefx Aqvori * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Crsdozg I Uyspfx Aqvji Available history and documentation   These elements can be quoted separately. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Csdjzgckcjpfx Aqvjri Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field Crodpfszgclmjx Aqvoi and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters - Type STN 30L/1 - 12/27 First registration 02/2024, German registration and from first owner Mileage only 32,771 km V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover Rinsing line 4 inches through the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotating outlet at the rear in 6", with emptying device Codpfxjz Am Eve Aqvsri 8" suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO Trailer-EBS with RSS stability program WABCO Optiturn - OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle: LIFT AXLE Tires: 6x 385 /65 R 22.5 RENTING is the new BUYING; with us, full-service rental is available IMMEDIATELY.

Condition: excellent (used), ALKO Power Unit 250 P – used – clean air extraction unit Air filtration using filter hoses, pneumatic cleaning, movable collection container, automatic fire extinguishing system ----- Technical data ----- Extraction nozzle diameter: 250 mm, Nominal volume flow: 3,534 m³/h, Number of bags: 2, Motor: 7.5 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,420 x 1,000 x 2,360 mm, Weight: 758 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked Crjdpfx Aezzn Iijqvei - Pneumatic system checked - Ready for immediate use

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg Csdodqzbrspfx Aqvori

Condition: as good as new (ex-display), Year of construction: 2026, - NEW - Manufacturer: Ganner Gannomat Type: SELEKTA 253 220 V, 1 phase, 50 Hz complete in standard version with: - Fully automatic electronic control with program selector switch COILING-GLUING-INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control light for glue residue level indicator in the glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water for flushing/cleaning Crodpedwi Rkefx Aqvei - 4 rollers for moving the machine including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm Insertion allowance 7 - 20 mm Air connection: 6 bar Price ex warehouse 54634 Bitburg - immediately available -

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA) and manual electric welding Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Codou U Iixopfx Aqvsri Protection class IP 23 Water-cooled and frost protection Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters *

Condition: excellent (used), General information Year of manufacture: 2016 Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Cedpfx Aqevpq Tbjveri Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1500 from 2016. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: excellent (used), General information Year of manufacture: 2016 Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Crsdsvpq Thopfx Aqvei Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer Atlas Copco/ Epiroc MB1500 from 2016 with Conti Lube, all bushes, seal kit, 2 guide plate small, 2 guide plate, 2 shock absorber, guide, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted. MB1600 MB1650 MB1700 MB1200