Used Horizontal Center for sale (19,590)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Year of manufacture: 2004 Control: Fanuc Travel distances: 760/760/800 Bwjdpfxey I Dqcs Afmow Without tools

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 22 / 26 [kW] - Spindle speeds : 100 - 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 800 x 600 x 800 [mm] - Rapid traverses rates (X/Y/Z) : 40 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Rapid traverse rate : 13,88 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 2,2 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 630 x 500 [mm] - Pallets number : 2 - Maximum weight upon pallet : 900 [kg] - Distance table / spindle axis (min./max.) : 43 - 643 [mm] - Distance table center / spindle nose (min./max.) : 145 - 945 [mm] - Maximum workpiece diameter : 740 [mm] - Maximum workpiece height : 550 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 56 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5.244 x 3.305 [mm] - Machine height : 3.345 [mm] - Machine weight : 10.000 [kg] MACHINE HOURS - Number of working hours : 9.095 [h] EQUIPMENT - CNC : Fanuc 0i-MD - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Manual guide - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 700 [l] * with oil separator * with high-pressure pump : 40 [bars] * Coolant through spindle * with paper filtering unit * With washing gun * With cabin washing - Parts hydraulic clamping : prepared Bsdpfeuhb D Njx Afmjww - Hydraulic counter balance : upon Y axis - Chips conveyor - Spindle cooling unit - Tool-holders : 35

Condition: used, Year of construction: 2004, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, controller manufacturer: MORI SEIKI, controller model: MSX-501, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,400 kg, Features a double pallet system, Mori Seiki MSX-501 control unit, but lacks the pallet lifting motor and the door guide. Workholding fixtures and tools are not included. Bsdezxr U Ispfx Afmjww COLLECTION MUST TAKE PLACE BY SEPTEMBER 2026.

Condition: used, Year of construction: 2017, Operating hours: 51,800 h Program run hours: 15,100 h Technical Data: Travel paths/axes X = 800 mm Y = 850 mm Z = 1,050 mm Bwodpfxexqp Ivo Afmjw B = 360°, 0.001° Max. spindle speed: 12,000 rpm Total connected load: 77 kVA Required space, LxWxH: 9,000 x 5,500 x 4,000 mm Weight: 18,100 kg Equipment: - Siemens 840D - Electronic handwheel - Heavy-duty machining package - Tool changer, rotary magazine with 180 places - Tool holder HSK 100 - Operator control panel - Internal coolant supply - Measurement and monitoring: Renishaw, infrared TDS, MPC

Condition: used, Year of construction: 1992, CNC Milling Center Mori Seiki Type/Model: MH-40 Condition: Used Year of Manufacture: 1992 Control: Fanuc Technical Data Travel range X-/Y-/Z-axis: 560 x 500 x 510 mm Spindle axis to table distance: 50 - 550 mm Spindle nose to table distance: 100 - 610 mm Table size: 400 x 400 mm Max. table load: 400 kg Max. workpiece diameter: 610 mm Table type: M16 thread 24, pitch 80 Spindle speed: 7000 rpm Taper bore: 7/24 taper No. 40 Diameter of front bearing: 80 mm Rapid traverse speed: 20000 mm/min Cutting feed rate: 0.1 - 5000 mm/min Tool holder: BT 40 / CAT 40 Number of tools: 60 Max. tool diameter: approx. 100 mm with adjacent positions occupied Max. tool diameter: approx. 150 mm with adjacent positions free Number of pallets: 2 Pallet changing system: rotating design Spindle motor: 11 kW Feed motor X-/Y-/Z-axis: 1.8 / 3.5 / 3.5 kW Power connection: 40 kVA Bodpfx Afo Ahyz Eemsww Footprint: approx. 1850 x 3710 mm Machine height: approx. 2550 mm Weight: approx. 10,000 kg Equipment: Internal coolant supply, 70 bar Inquiry item: Transportation costs will be provided in a separate offer.

Condition: like new (used), Year of construction: 2015, operating hours: 2,500 h, functionality: fully functional, AVAILABLE FOR INSPECTION DURING PRODUCTION DOOSAN HORIZONTAL MACHINING CENTER Model: HM1250 Year: 2015 Control Unit: FANUC 31I-B X-axis travel: 2100 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm Table length: 1250 mm Table width: 1250 mm Max. workpiece dimensions: DIAMETER 2300, HEIGHT 1725 Max. workpiece weight on table: 40000 kg Bedpfx Afsz Ihnaemoww Spindle speed: 6000 rpm Spindle connection: ISO 50 Torque (continuous / 10 min): 1989 Nm Number of tools: 90 positions High pressure: 70 bar

Condition: refurbished (used), 1. Machine Specifications * 2 work tables with automatic pallet changer - Clamping area 400 x 400 mm - Perforated pallets - Max. clamping weight 400 kg - NC rotary table - Rotatable clamping position * Travel ranges - Column longitudinal travel (x) 650 mm - Support vertical travel (y) 500 mm - Table transverse travel (z) 650 mm * Max. feed rate 36 m/min * Rapid traverse 40 m/min * Working spindle - Tool interface - SK 40 DIN 69871 - Drive power 24 kW AC - Torque 230 Nm - Speed range, stepless 0 ... 10000 rpm * Coolant supply through the spindle center 50 bar * Tool magazine 60 positions * Control system Sinumerik 840 D Bwjdpfx Afjz H Tn Ajmew * Machine bed made of mineral cast * Enclosed work area protection * Chip conveyor * Paper band filter system 2. Technical Condition The machine was only used in production until February 2013! Due to the overhaul, the machine meets the acceptance conditions for new machines. - The machine was completely disassembled and cleaned. - All compact guides and ball screw drives were replaced. - The main drive motor and feed motors were inspected in authorized workshops and, if necessary, refurbished. - The main spindle body was replaced with a new one, the spindle was re-bearinged, and run-in on the test stand. - All cables, air lines, and defective sensors were replaced. - Table assembly, magazine, tool changer, and coolant system were overhauled. - The panes of the work area protection were renewed, and a new paint job was applied. In addition, a new main spindle and a new Kessler motor can be supplied as spare parts. 3. Warranty: last inspection 03/2013; 3 months 4. Prices: * Machine €110,000.00 * Installation/Commissioning €6,000.00 (for installation/commissioning abroad, travel costs will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works. We reserve the right to sell the machine in the interim. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order against invoice 60% upon delivery 10% upon handover * Delivery time: 4 weeks

Condition: used, Year of construction: 2010, x-travel 1.100 mm y-travel 900 mm z-travel 1.250 mm Bsdpfx Afjymfzrjmjww control SIN 840 D spindle turning speed - gearbox stage 1 20 - 1.333 1/min. spindle turning speed - gearbox stage 2 1.333 - 8.000 1/min. power capacity at 60% / 100 % load 50 / 37 KW tool taper SK50 B - axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 500 U/min feed X/Y/Z/-axis 1 - 60.000 mm/min rapid traverse 60 m/min feed capacity X/Y/Z 17 kN numbers of pallets 2 pallet size 800 x 800 mm table load 1,50 t tool magacine with 120 Plätzen tool length - max. 600 mm tool diameter 135 mm wotkpiece diameter with 2 vacant positions 350 mm weight of tools max. 60 kg total power requirement 150,00 kW weight of the machine ca. 35,00 t dimensions of the machine ca. 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation; Pallett-changer with 2 palletts and hydr. chuck Forkardt 3KS1000, Coolant unit KNOLL; Coolant through spindle (30 l/min 50bar);

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Bwedpfx Aoy Iwdpjfmsw Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: used, Year of construction: 2007, operating hours: 30,271 h, functionality: fully functional, machine/vehicle number: 147, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,950 mm, controller manufacturer: Fanuc, controller model: 15i, total height: 4,500 mm, total length: 5,500 mm, total width: 6,500 mm, table load: 8,000 kg, rotational speed (max.): 4,000 rpm, overall weight: 40,000 kg, spindle speed (max.): 4,000 rpm, operating hours of spindle: 30,251 h, coolant supply: 70 bar, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, Good used MITSUI SEIKI HU 150 A for sale Bwsdjz Iyd Tspfx Afmew - Fanuc 15i control - Knoll high-pressure system, 200 liters, 70 bar - Chip conveyor - Tool magazine, 120 positions, BT 50 - NC table, 0.001° accuracy - 2 pallets, 1500 x 1500 mm - Extended Z-axis - Machine can be inspected while powered on - Year of manufacture: 2007 - Linear scales in all axes

Condition: used, Year of construction: 2004, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 600 mm control: Fanuc 16 iMA rapid travel x/y/z: 84 / 84 / 94 m/min feeds x/y/z -stepless: 50000 mm/min spindle drive: 22 kW spindle speed:: 50 - 14000 1/min max. torque on the spindle: 156 Nm size of pallet: 400x400 mm numbers of pallets: 2 table load: 500 kg working diameter: 630 mm workpiece - installed height: 1000 mm Bsdpfe Afyu Tex Afmjww change time of pallets: 10 sec distance spindle center to table: 80 -640 mm Distance spindle nose - pallet centre: 70-670 mm tool magazin:: 60 x HSK-A 63 tool changing time: 1 (4) sec max. tool weight: 8 kg max. tool diameter: 70 / 170 mm tool length - max.: 360 mm total power requirement: 64 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 15 m² Accerories Tool life management Macro B 600 Variables Chip conveyor scraper type Coolant through Spindle 50 bar Knoll VRF unit This well maintained horizontal machining center has a full 4th axis, twin pallet changer, 60 tools magazine for HSK-A 63 toolholders and coolant through spindle 50 bar. An external hydraulic pressure control system for fixtures is provided. There are a total of 4 machines available, 3 machines YOM 2004, thereof one machine is non-functional and can be used for spareparts, and one machine YOM 2000 (our stock-No. 300457) *

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 BIG PLUS - Spindle power : 26 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560/640/640 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] Bjdpfouhbv Sox Afmoww TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Maximum workpiece diameter : 630 [mm] - Maximum workpiece height : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4100X2300 [mm] - Machine height : 2720 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Number of working hours : 3700 [h] EQUIPMENT - CNC : Fanuc 31 iB Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle * With cabin washing - Chips conveyor : Arrière - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw OMP60

Condition: excellent (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, coolant supply: 40 bar, number of slots in tool magazine: 300, Equipment: documentation/manual, This machine was used solely for precision finishing and is in very good condition. Bjdpfx Afjz Hzymomeww

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 2560001, Technical specifications: # Machining workspace: X 600 mm; Y 525(890) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis (A, rotary table) and 2 rotary axes (C, indexer head) with direct angular measurement system, 50 rpm, accuracy +/- 5 arcseconds # Maximum clamping/part dimensions: Ø 600 x 1420 mm; max weight 600 kg # Rapid traverse speeds: X/Y/Z 50/60/50 m/min; positioning accuracy Tp: 0.02 mm # Distance between spindles: 600 mm # Spindle speed: 1–6000 rpm # Spindle taper: DIN69893-HSK-A100 (with internal coolant supply) # Automatic tool changer: 2 x 20 tools, average chip-to-chip time 4.25 s # Tool maximum: Ø75 mm / length max. 275 mm / 7.5 kg Electrical specifications: # Voltage: 3x400V/50Hz Bwjdpfjxxkd Usx Afmow # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space (W x H x L): approx. 5.8 x 3.3 x 5.05 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring devices: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # High-pressure oil filtration system, up to 80 bar: Knoll KF200/1200 # Shaft, guideway, and electrical cabinet cooling systems # 2 oil lubrication circuits # Oil mist absorption/recovery system # Tool breakage and length measurement: Blum Novotec # Work spindle tool presence detection system Machine condition: NOT OPERATIONAL # Automatic operator doors # Tool magazine # Axis protection covers for work area # Z-axis ballscrew and # Z-axis linear guides # Hydraulic overheating # Hydraulic pump (250 bar)

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: 81147, Origin: JP Dimensions: 290x180x220 cm Net machine weight: 4500 kg TECHNICAL SPECIFICATIONS Axis travels X-axis: 305 mm Y-axis: 305 mm Z-axis: 330 mm B-axis: continuous rotation 360°, indexing 0.001° Table and pallets Pallet dimensions: 254 × 254 mm Number of pallets: 2 Maximum load per pallet: up to 250 kg Bwedpfx Aoz U Uy Rofmjw Spindle Spindle taper: BT40 / NST40 Maximum speed: 15,000 rpm Spindle power: approximately 7.5 to 12 kW Tool changer Magazine capacity: 40 tools Tool change time: approximately 1.7 seconds Chip-to-chip time: approximately 6.5 seconds Feed rates Rapid traverse X/Y/Z: up to 24 m/min Numerical control CNC YASNAC i80Mi or YASNAC 180Mi depending on configuration Dimensions and weight Main equipment Automatic pallet changer (APC) Integrated 4th axis 40-tool magazine Coolant system RS232 communication interface (depending on configuration) Subject to error or omission, the technical information is provided without guarantee.

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping... Bwsdpfxewix E Re Afmow *

Condition: used, Technical details: Bedpfxjwix Hho Afmeww x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: used, Year of manufacture 1997 2 grid tables Bwodow Uf N Sepfx Afmew Working area X 3,900 mm Working area Y 1,600 mm Working area Z 200 mm Additional images available

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Bwedpfsy Ah Rcjx Afmew Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards. Bwsdpexm Sxvefx Afmsw

Condition: used, Year of construction: 2008, travel distance X-axis: 500 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 210, Horizontal Machining Center Bwsdpeyigalofx Afmjw Manufacturer: MATSUURA Model: H.PLUS 300 Year of manufacture: 2008 Control: Matsuura G-Tech 30i Technical data: Travel ranges: - X-axis travel: 500 mm - Y-axis travel: 560 mm - Z-axis travel: 500 mm Main spindle: - Max. speed: 20,000 rpm - Number of tool positions: 210 - Total power requirement: 52 kW Equipment & accessories: - 5-station pallet changer - New spindle (including ceramic ball bearings) - New spindle chiller In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min Bjdpfx Afsy E Np Sjmeww max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: good (used), Year of construction: 2005, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year: 2005 Working hours: !!! 9.971 !!! h SPECIFICATIONS Bwedpfjzizd Hex Afmsw Travel X-Axis: 1.400 mm Y-Axis: 1.200 mm Z-Axis: 1.200 mm B-Axes: 0,001° Rapid motion: (X/Y/Z): 50 m/min. Spindle speeds: 10.000 rpm Spindle power: 30 / 25 kW Tool: BT 50 Toolchanger Tool capacity: 140 Palett system Amount of paletts: 2 Palett size: 800 x 800 mm Machine weight: 32.000 kg Req. space (LxBxH): 9,200 x 4,900 x 3,920 m Equipment Internal cooling: 70 bar Chip conveyor High pressure pumps

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,120 mm, Toshiba BMC80 with 4-axis control Year of manufacture: 1987 CNC control: Tosnuc Travel ranges: X = 1,600 mm, Y = 1,000 mm, Z = 1,120 mm 2 pallets, each 800 × 800 mm B-axis: 360° Max. table load: 2,000 kg Bwjdpfx Asz Ahtnofmsw Max. spindle speed: 4,500 rpm CAT 50 Automatic tool changer with 60 positions Renishaw Tool measurement

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, controller manufacturer: Siemens, controller model: 840D Solutionline, spindle speed (max.): 10,000 rpm, coolant supply: 70 bar, spindle nose: HSK63, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Hüller Hille NBH500 Condition: Functionally refurbished by the professionals at GSN Maschinen-Anlagen-Service GmbH (Pallet changer, guideways and ball screw drive, measuring system) Bwjdszzqwgopfx Afmow Spare parts, repairs, modifications, retrofits, relocation, commissioning, and much more – all from a single source. Technical data and highlights: Pallet size: 500x500mm (Additional pallets available) Year of manufacture: 2013 Tool interface: HSK63 Control system: Siemens 840D Solutionline Main axes: X/Y/Z/B Spindle type: Motor spindle Spindle speed: 10,000 rpm Tool magazine: 60-position chain magazine Axis travels (X/Y/Z): 900/800/900mm Coolant: 600l coolant tank incl. chip conveyor Rotary table (B): NC type, 0.001mm Options: Renishaw measuring probe, work area extraction, internal coolant supply 60 bar, 6-position hydraulic clamping system on the setup station.