Used Honer Exact for sale (891)

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Chedpfxjxr Ng Ue Abbjf Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: new, color: black, !!!!! SPECIAL PRICES !!!!! ALL ITEMS AVAILABLE FOR IMMEDIATE DELIVERY! KINSHOFER Clamshell Bucket 604HPX 250 liters (50cm) incl. KM 04 S69-30 Rotator, pin connection KINSHOFER Clamshell Bucket 604HPX 325 liters (60cm) incl. KM 04 S69-30 Rotator, pin connection KINSHOFER Crane Fork KM415 in stock KINSHOFER Stone Stacking Grab KM332V 1100C in stock, IMMEDIATELY AVAILABLE! Descriptions: KINSHOFER Clamshell Bucket 604HPX 250/325L complete package The universal two-shell grab KM 604HPX equipped with the HPXdrive Standard is ideal for daily use, for digging and loading with a truck-mounted crane. The advantages of the revolutionary HPXdrive technology make it a reliable and easy-to-operate attachment. - Available in 250L or 325L capacities - Bolt-on teeth - HPXdrive Standard - Hydraulic check valve and pressure relief valve - Closing force: 19 kN at 26 MPa operating pressure - Color: Black KINSHOFER Rotator KM04S69-30 pin connection The applied 'Gerotor' principle allows for the construction of very compact and effective rotators. Operators particularly appreciate its precise starting and stopping characteristics. Specifically: the grab does not rotate unintentionally when digging, it stops exactly even under maximum load, and there is no need to counter-steer when handling long loads. - Load capacity up to 4500 kg - Motor head made of steel - Max. operating pressure for rotation: 370 bar - Max. hydraulic flow for rotation: 40 l/min - Max. hydraulic flow for swivel: 75 l/min Codpfx Ajxnn Nysbbehf - Connections: M18 x 1.5 _____ KINSHOFER Crane Fork, version KM415-2000-600. Type: up to 2000 kg with 1150 mm tine length. Available with lifting eye only, or also with rotator/rotary drive KM04S. Optional quick-change device KM505 available upon request. ALL AVAILABLE FOR IMMEDIATE DELIVERY! _____ KINSHOFER Stone Stacking Grab KM332-1100 complete package incl. rotator, hoses, suspension, pressure rails, and much more. IN STOCK, AVAILABLE IMMEDIATELY! Stone Stacking Grab KM332-1100 complete package The technically advanced stone stacking grab KM 332 is highly versatile for both palletized and non-palletized building materials. - Fixed or adjustable insertion depth with parallel opening and closing gripping arms, hydraulically actuated. - Versatile usage thanks to opening widths from 400 mm to 1400 mm, e.g., for loading individual concrete elements such as kerbstones up to entire packs of bricks. - Adjustable insertion depths available on KM 332V – ideal for loads of varying heights. - Synchronization of the gripping arms via two hydraulic cylinders with a differential circuit. - Safety ensured by an overpressure valve in the hydraulic system, protecting against overload. A check valve prevents the grip from releasing even in the event of pressure loss from the carrier machine. - Durability thanks to generously dimensioned bearings, integrated lubricant reservoir, automatic main bearing wear compensation, and spherical central bearing on the cylinders. KINSHOFER Rotator KM04S69-30 pin connection The applied 'Gerotor' principle allows for the construction of very compact and effective rotators. Operators particularly appreciate its precise starting and stopping characteristics. Specifically: the grab does not rotate unintentionally when digging, it stops exactly even under maximum load, and there is no need to counter-steer when handling long loads.

Condition: used, mileage: 22 km, power: 77 kW (104.69 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,140 kg, first registration: 04/2023, loading space length: 3,533 mm, loading space width: 1,784 mm, loading space height: 1,886 mm, emission class: euro6, color: white, number of seats: 3, total width: 2,474 mm, total height: 2,550 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 89422 ---- Subject to errors and prior sale! LOCATION: 04758 Oschatz, Filderstädter Straße 10 Tel. no. for inquiries: Mr. Enrico Schieler: 03435 ? 90 90 22 or SPECIAL EQUIPMENT * Seat package 15: Driver's seat, 4-way adjustable - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height adjustable - Tray integrated in the double passenger seat (foldable) - Seat heating for driver and passenger - Armrest inside for driver - Lumbar support, manual (driver's seat) - Seat cover: fabric OTHER EQUIPMENT * 1 battery * Airbag driver's side * Anti-lock braking system with electronic brake force distribution including ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake support including emergency brake light * Battery life, battery life programmed to 10 min * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Double-wing rear door with 180° opening angle (without window) * Electric front window lifter - with quick-down/-up switch for driver's side * Ford Easy Fuel * Generator, high-performance version * Lockable glove compartment with lid * Interior lighting with delay switch with reading lights at the front * Air conditioning at the front including dust and pollen filter * Fuel tank 70 l * Cargo area lighting * Steering wheel: artificial leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency call assistant * Package: Technology package 9 - Heated windscreen - Windscreen wipers with rain sensor - Parking pilot system at the front and rear - Emergency brake assistant, active (camera-based) - Lane assistant with fatigue warning and high beam assistant, additionally with lane keeping assistant - Headlight assistant with day/night sensor - Cruise control - Fog lights - Ford audio system * Particle filter: diesel particulate filter * Wheels: Hubcaps * Wheels: Tire repair kit * Wheels: Steel wheels 6.5 J x 15 * Headlight dipped beam: Halogen headlights with daytime running lights * Sliding door entry light automatically when door is opened * Sliding door, right * Mud flaps at the rear * Side protection strips Cjdpelu Aqdefx Abbjhf * Power steering * Seat belts - seat belt tensioners and belt force limiters at the front * Start-stop system * Rear bumper with integrated step * Partition (plastic) at the height of the B-pillar * Air recirculation switch * Lashing eyes * Immobilizer * Heat-insulating glazing, slightly tinted * Central locking with remote control * Second key with remote control * Overhead storage compartment at the front ... and much more----1st hand. German version. Errors and prior sale reserved. 2-year factory warranty from the first registration (can be extended on request). We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you! As a deviation of the vehicle from the above description cannot be ruled out despite existing checks, we would like to point out that the vehicle description only serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The only decisive factors are the agreements in the order confirmation or in the purchase contract. The exact scope of equipment is provid

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 35 rpm, bed width: 250 mm, - Demonstration machine - - Handwheel on the left of the support - Chodpowrndzefx Abbsf with 3-axis digital display FAGOR INNOVA30iT (Art. No. 103877) * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: used, mileage: 224,000 km, Equipment: ABS, air conditioning, IVECO ML 120-190/P – 2020 Euro 6 – flatbed with ramp: - First registration: 2020 - Euro 6 engine – 190 HP - Approx. 224,000 km - 6-speed manual gearbox + reverse - Rear air suspension - Tyres: 265/70R19.5 - GVW: 11,990 kg - Payload: approx. 5,300 kg - Digital tachograph Features: - Air conditioning, electric windows, electrically adjustable mirrors, ABS, air-suspended high driver's seat, 3 seats, sun visor, rear cab wall with window Body: - Flatbed body, internal dimensions 5.90 x 2.41 m with 40 cm drop sides, winch with remote control, and double-acting hydraulic rear loading ramp, suitable for transporting vehicles and equipment (Two units available) The vehicle is available for inspection and test drive at: Cedpfxexziygj Abbshf PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Zone) 37067 Valeggio sul Mincio (Verona) Tel. +39 045-7950955 Please contact us to schedule an appointment to better organize access to our premises. For further information, technical details or to request the vehicle's selling price, please contact our sales managers directly at +39 045-7950955. N.B.: Please note that the vehicle description is intended as indicative and may contain errors or inaccuracies. Prospective buyers are required to verify the exact characteristics of the vehicle before making a purchase. PSL Autocarri Srl declines any responsibility for errors or discrepancies found in this vehicle description. N.B.: WE WILL ONLY RESPOND TO INQUIRIES CONTAINING THE APPLICANT'S NAME AND TELEPHONE NUMBER.

Condition: used, mileage: 289,000 km, power: 350 kW (475.87 HP), first registration: 03/2021, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, color: silver, gearing type: automatic, Equipment: air conditioning, parking heater, soot filter, Vehicle number: 253438 Chedpfx Absxiuiiebjf 1st owner, accident-free, full service history, non-smoker ---- INTERIOR * Stationary air conditioning WHEELS * Alloy wheels OTHER EQUIPMENT * Retarder Additional features * Solostar * Bi-xenon headlights ---- Subject to prior sale and errors. The vehicle description serves solely for general identification purposes and does not constitute a warranty in the legal sense. The exact equipment details are available from our sales staff. Please contact us.

Condition: new, Year of construction: 2017, functionality: fully functional, Item number: 470722 Serial number: 470722-5 Material: Aluminum Total weight: 27 kg Dimensions Base plate: 460mmx300mmx25mm Upper guide plate: 300mmx300mmx22mm Overall height: 105mm Travel: 130mm Total length: 680mm Cjdpfx Absu Raqpsbohf The Tünkers LE100-150 VRL SB T02-4 is a pneumatic linear unit designed for precise and repeatable linear movements in industrial applications. With a pneumatic drive, it is ideal for automated production processes in which exact positioning and stable sequences are required. The robust design ensures a long service life and low maintenance requirements, even under intensive use and demanding conditions. The unit can be flexibly installed both horizontally and vertically, which increases its adaptability to different areas of application. In addition, it is possible to integrate sensors and control components to monitor and control the movement even more precisely. This makes it a versatile and reliable solution for industrial applications where high precision and durability are required.

Year of construction: 2002, condition: good (used), machine/vehicle number: HHNRW, Demag / CTI monorail with 7 Demag DH hoists (ladle transport system of an aluminum foundry) Payload / lifting load 6300 -7000 kg / 6.3 + 7 tons approx. 100m runway beam (CTI profile - kit system) without hall constructions ff. Csdsh Ad Saopfx Abbjhf 9 pneumatic switches, bends, various distributors + control cabinets + pneumatic controls Documentation including circuit diagrams and test books are available Hoists can be moved individually on the rail system, each hoist has its own control, including busbar system to supply the hoists Can be moved completely in two stages - fine stroke! Used condition - system was serviced / overhauled in 2018 for 155000 euros (rails / hoists) Plant is dismantled and immediately available (scope of delivery approx. 20-25to approx. 2 truck loads) More pictures upon request. Shipping by courier possible, collection preferred Freight costs within a radius of 500 km 1400 euros. Please inquire about the exact costs according to your zip code!

Condition: used, mileage: 10 km, power: 125 kW (169.95 HP), fuel type: diesel, wheelbase: 4,215 mm, overall weight: 3,500 kg, empty load weight: 2,500 kg, maximum load weight: 1,000 kg, first registration: 09/2025, next inspection (TÜV): 09/2027, loading space length: 3,800 mm, loading space width: 2,100 mm, loading space height: 400 mm, loading space volume: 3.2 m³, emission class: euro6, color: white, driver cabin: other, number of seats: 7, construction height: 2,250 mm, working width: 2,175 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Air conditioning, central locking with remote control, electrically adjustable and heated exterior mirrors, electric front windows, onboard computer, cruise control, multifunction steering wheel, light and rain sensor, LED daytime running lights, radio, touchscreen display, hands-free system, Apple CarPlay, Android Auto, heat insulating glazing, tachometer, driver’s side airbag, anti-lock braking system (ABS), traction control (ASR), diesel particulate filter, full service history, immobilizer, side marker lights, outside temperature display, power steering, exact specification to follow, vehicle with extended loading bed, cab seating: height-adjustable driver’s seat, cab seating: second row 4-seat bench, overhead storage shelf, electronic brake force distribution, brake assist, height-adjustable steering column (steering wheel), electronic stability program (ESP), body/build: flatbed double cab (standard), wheelbase 4,332 mm, drive type: front-wheel drive, 6-speed gearbox, model update (2), gross vehicle weight 3.5 t, flatbed body, cargo compartment lining: wood, front mud flaps, gearshift indicator, interior filter: pollen filter, cab seating: driver’s seat with armrest, cab seating: multifunctional double passenger seat. Financing Example * Cash price: €43,911.00 Csdpfxew Sduhj Abbohf * Down payment: €8,782.00 * Term: 60 months * Net loan amount: €35,129.00 * Effective annual interest rate: 5.99% * Nominal (fixed) interest rate p.a.: 5.83% * Total credit amount: €40,583.00 * Monthly payment: €676.00 *A representative financing example from Santander Consumer Bank AG, Santander-Platz 1, 41061 Mönchengladbach, for private customers, with the dealership acting as a credit intermediary. Subject to credit approval. This information also serves as the 2/3 example in accordance with § 6a (3) PAngV.* Over 150 vans and minibuses in stock. Financing or leasing available via Santander Consumer Bank, Bank 11 or Auto Europa Bank – we are happy to advise you. This offer is non-binding; no guarantee for equipment details. Listed features may be subject to separate verification. Changes, errors, and prior sale reserved. Delivery available for an additional fee. Export license plates available onsite. Trade-in of your old vehicle possible. Retrofits available for: - Tow bars, also up to 3,500 kg - Auxiliary heaters - Monitors for reversing camera and/or navigation via smartphone (Android Auto) - Rear view systems with reversing camera - Workshop fittings - Cruise control - Retrofit of a tail lift and other individual solutions for your business needs available for an additional charge.

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, bed width: 250 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 35 rpm, quill mount: MK 3, Equipment: rotational speed infinitely variable, - Demonstration machine - - Handwheel on the left of the support - with steplessly variable spindle speeds and 3-axis digital display FAGOR INNOVA30iT (Art. No. 103878) Chodpfowrngcox Abbsf * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, laser wavelength: 10,600 nm, working length: 2,000 mm, working width: 1,500 mm, shaft length: 10,600 mm, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, SEI Laser Mercury 609 with Rofin CO₂ Tube, TEKA Extraction System & Icaro Backlight Software – Precision Large-Format Laser Cutting System For sale is an SEI Laser Mercury 609 equipped with a powerful Rofin CO₂ laser tube, a high-quality extraction system with TEKA filtration unit, and the original SEI Icaro Backlight control software. This machine delivers precise cutting results in large-format applications, making it ideal for demanding requirements in sign making, acrylic processing, industrial manufacturing, or display construction. Technical specifications: Manufacturer: SEI Laser Model: Mercury 609 Laser source: Rofin CO₂ tube Laser power: 300 W Working area: approx. 1500 × 2000 mm Control: CNC / SEI Icaro Backlight Software Extraction: Includes TEKA filtration system with pre-filter and activated carbon Condition: used, well-maintained, fully functional Chodpfxow D Rw Is Abbef Availability: immediately Special features & equipment: • Laser class 4 due to fully enclosed work area • Robust industrial design for continuous operation • Rofin CO₂ laser tube – easy maintenance and reliable • Icaro Backlight control – optimized for backlight, engraving, and cutting applications • Excellent cut quality – clean edges even on intricate contours • Large-format processing of materials such as acrylic, MDF, wood, cardboard, plastics, paper (including material library) • High-performance extraction system with TEKA filter for clean workplace air Exact operating hours will be provided upon request. Inspection of the machine is possible by prior arrangement. A test run can be performed on site.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Schröder Hamax 800 year of construction 2006. HAMAX 800 whole muscle stuffer is automatic filling of fresh (for example, as restructured meat) or cured meat parts/pieces of meat (for example, as raw and cooked cured meat) in artificial casings. The fundamental principle of the machine is based on a hydraulically driven piston that presses the meat into the casings. The HAMAX 800 whole muscle stuffer forms the technical requirement for increasing the efficiency in the production of sliced goods which are calibrated in length and thickness. In combination with an automated double clipping-machine, swift and efficient processing can be reached, which was previously very time-consuming for these products. The combination of the whole muscle stuffer and the integrated cutting system is the innovative factor. This affects the exact portioning of pork loins with tendon. Chedpfjxrnkfjx Abbef 2x filling pipes including 95 mm & 125 mm. Capacity up to 1200 kg / hour.

Condition: new, functionality: fully functional, Item number: 308602 Serial number: 308602-2 Chjdpfou Rbpaox Abbof Material: Aluminum Total weight: 62 kg Dimensions Base plate: 710mmx400mm Upper guide plate: 400mmx400mmx22mm Overall height: 130mm Travel distance: 350mm Total length: 1080mm The Tünkers LE200-300 VRL SB T024 is a pneumatic linear unit designed for industrial applications requiring precise and reliable linear motion. With a robust pneumatic drive, this unit is ideal for automated production and assembly processes where exact positioning is crucial. The robust design ensures a long service life and low maintenance, even with intensive use in demanding environments. The pneumatic linear unit can be mounted flexibly and can be used both horizontally and vertically, allowing it to be adapted to different areas of application. In addition, the linear unit can be equipped with sensors and control components to ensure precise monitoring and control of the movement. It is therefore a versatile and durable solution for industrial applications that require high accuracy, reliability and flexibility.

Condition: not inspected (used), ★ Lot of SK 40 Tool Holders with Tools in Rolling Shutter Cabinet ★ Condition: Not tested Delivery terms: Free loaded on truck – unpacked Location: 73347 Mühlhausen, Germany Availability: By arrangement – The equipment must be collected by the buyer no later than February 2026. The exact collection date will be specified by us. Earlier collection may be possible upon prior agreement. Payment terms: Advance payment by bank transfer Internal no.: JO10 ⚙️Technical data High-quality Diebold rolling shutter cabinet Equipped with 79 premium SK 40 tool holders (including tools) Dimensions & weights Approx. dimensions (L x W x H): 950 x 600 x 2000 mm Approx. weight: 350 kg Chodsxiy Svepfx Abbsf ⚠️ Please also see our other listings ⚠️ Additional notes: ► We expressly recommend collection via direct transport (haulage company) ► Goods are sold as is – without any warranty ► Technical data provided without guarantee ► Subject to prior sale ❗ Sale exclusively to businesses ❗

Condition: used, color: green, loading space volume: 29 m³, loading space width: 2,300 mm, loading space length: 6,200 mm, loading space height: 2,000 mm, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Body: roll-off container with wing doors, approx. 29 m³. Year of manufacture cannot be determined exactly, as there is no type plate. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Chodpoxgu Hvofx Abbef

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl Csdpfxov T Truj Abbshf - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: new, power: 397 kW (539.77 HP), overall weight: 56,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,470 mm, loading space length: 4,800 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH540 Chassis with Wiese Platform Body and Fassi Loader Crane Volvo FH540 10x4 Removable Flatbed with F1150RA.2.28 & Fly Jib, plus Winch and Work Basket ----Application · For good roads, standard operating conditions · Long-distance transport · Predominantly flat topography · Ambient temperature up to +40°C, if above +40°C max. 25 hours/year · Ambient temperature down to -25°C, if below -25°C max. 25 hours/year · Center of gravity (structure and load) approx. 0.5 - 1 m above top edge of frame · Clean roads, max. 10% dirty · Flatbed chassis without pre-installation · Gross combination weight, technical: 80 t (Observe the towing capacity of the trailer hitch!) · Special vehicles · Vehicle for crane behind the cab · Mirrors for body width of 2600 mm · New model · Chassis height: MED (medium), please refer to VBI/WIS for exact height measurements · Electorhydraulically steered trailing axle, single tires · Rear air suspension, tridem, 2 driven axles · Globetrotter safety cab FH · Wheelbase 4,300 mm · Emissions per Euro 6 Stage E, with SCR, particulate filter and EGR · Diesel engine 12.8 l, 551 HP/405 kW, 2,652 Nm · Volvo Engine Brake+ (VEB+). Braking performance: 340 kW/462 HP (D13S) · Complies with ADR braking regulations · I-Shift AT2612, automated 12-speed transmission (direct-drive), max. input torque: 2,652 Nm · Liftable axle Cedpfjw D U Ikox Abbohf · Drive axle RTH2610B. Tandem axles with hub reduction. 4 planet gears · Longitudinal and transverse differential locks · AA tires 315/80R22.5 · Drive axle ratio 3.33 : 1 · Fuel type: Diesel ---- Scope of Delivery Includes: Base unit: F1150RA.2 xhe-dynamic Wiese platform body with drop sides * Execution of all necessary chassis modifications for crane installation, disassembly and assembly of mounted parts, exhaust system, tanks etc., adjustment of the vehicle frame. All chassis and bodywork modifications are performed in compliance with the respective chassis manufacturer’s mounting guidelines and carried out to the highest quality standards. Complete assembly of a custom-designed and manufactured auxiliary subframe made of fine-grain steel, for crane and body. The welded and bolted subframe to the chassis guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique design of the subframe is a distinctive feature. Designs are executed to the highest standards and painted in the chassis RAL color. * Mounting/bolting of the crane and main stabilizer beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front * Flatbed design as a steel/welded construction, REMOVABLE FLATBED, length approx. 4800 mm x width 2480 mm with hydraulic extension to 1400 mm, radio remote controlled. Flatbed structure in steel / sandblasted / painted in chassis RAL color. Removable aluminum drop sides, Suer brand, 600 mm high, anodized finish. Standard bed floor with welded 4 mm steel chequer plate, painted. 2 rows of MultiSave locking system flush-mounted and welded into the floor. 6 x Thiele lashing rings 5000 daN recessed into base frame. 8 x retractable lashing rings per side 2000 daN, flexible profile/arrangement. Stable front wall consisting of welded frame, welded-on 4 mm steel plate and 5 accessory hooks, front wall height 1300 mm, made of steel / painted in the chassis RAL color. Trimming panels, mudguards in stainless steel (WIESE design). 4x 20' container locks on the front wall (2x) in the extensio...

Condition: used, machine/vehicle number: YS2R6X2000208xxxx, mileage: 595,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 21610 Specifications: 2013 model EU-approved until 06.05.2026 Approx. 595,000 km Euro 5 Wheelbase: 310 cm 6x2 620 hp Retarder Codsxx H Shjpfx Abbehf Full air suspension Movable fifth wheel Bogie Tires (see pictures) Tipping hydraulics Prepared for asphalt body NATO connector Clutch replaced in June Small exhaust leak on manifold "Visibility" error code appears – owner unsure which light it refers to 600 l diesel tank Radio/DAB AC/climate control Delivery by agreement Description:2013 Scania R620 6x2 tractor unit with tipping hydraulics and preparation for asphalt body.Gearbox has been removed at some point – owner doesn’t remember the exact work done, but the clutch was replaced.Delivery by agreement. Km: 595000 HK: 620 Technical approved: Yes EU-approved until: 06.05.2026 Own weight: 9900 Total Weight: 27000 Payload: 17100 Width: 255 Length: 675 Euro: 5

Year of construction: 2017, condition: new, functionality: fully functional, Item number: 307516 Serial number: 307516-5 Chodpfx Abeu Nzzyjbjf Material: Aluminum Total weight: 29 kg Dimensions Base plate: 510mmx300mm Upper guide plate: 300mmx300mmx22mm Overall height: 105mm Travel distance: 250mm Total length: 780mm The Tünkers LE100-200 VRL SB T02 is a pneumatic linear unit designed for precise, reliable linear movements in industrial applications. With a pneumatic drive, it is ideal for automated manufacturing processes, assembly and handling systems where exact positioning is required. The robust design ensures durability and reduces maintenance requirements, even under demanding operating conditions. Flexible mounting options allow it to be installed both horizontally and vertically, making it versatile. It can also be equipped with sensors and other control components to enable precise monitoring and control of movements. This pneumatic linear unit offers a reliable, durable solution for industrial applications that require high precision and stability.

Condition: used, Year of construction: 2004, Used Shrink Wrapper MIMI – Overview This used MIMI shrink wrapper is engineered for grouping and overwrapping PET bottles into stable retail-ready bundles on a modern used bottling line. Designed for industrial packaging and beverage production, it delivers dependable second hand performance with efficient film-only bundling. The machine is configured for straight infeed handling of round bottles and supports multiple pack patterns without cardboard backing, making it a versatile choice for high-throughput packaging operations. Built for continuous-duty operation, this shrink wrapper is well-suited to integrate into existing bottling equipment and packaging machinery. It is a strong fit for beverage production environments where consistent pack quality, format flexibility, and reliable throughput are essential. With compatibility for common PET bottle sizes and standard pack matrices (3×2, 2×4, 3×4), it helps reduce material consumption by eliminating trays or pads while maintaining pack stability after heat shrinking. Technical Specifications & Performance Data Manufacturer: MIMI Machine type: Shrink Wrapper Year of manufacture: 2004 Capacity: up to 6,000 bottles/hour or 100 packs/hour (depending on pack configuration) Bottle sizes supported: 0.33L, 0.5L, 1.0L, 1.5L Container types: PET bottles Pack configurations: 3×2, 2×4, 3×4 (trayless, no cardboard backing) Infeed orientation: Straight infeed for round bottles Advanced Automation & Control Systems The machine is designed for inline, conveyor-fed operation typical of automatic shrink wrapping systems. Standard industrial protections and operator interfaces support routine adjustments and format changes. Exact PLC/HMI, electrical ratings, and power data are not specified in the available documentation. Production Line Integration Capabilities This shrink wrapper integrates smoothly with upstream and downstream bottling equipment, including conveyors from fillers, labelers, and pack conveyors to palletizing. The straight infeed accommodates round PET bottles and allows quick transitions between pack matrices. Its trayless film bundling reduces material handling and simplifies logistics while maintaining pack integrity after the shrink tunnel. Machine Condition & Maintenance History Chodpfexurm Ajx Abbsf The machine was removed from service in 2019 and is currently not in active production. It is offered as a second hand unit suitable for recommissioning. Specific maintenance logs and operating hours are not provided in the available documentation. Operational Performance & Versatility Optimized for PET bottles, this shrink wrapper covers the most common beverage bottle sizes from 0.33L through 1.5L. Its ability to produce 3×2, 2×4, and 3×4 bundles without cardboard backing supports cost-efficient industrial packaging while preserving good pack stability following shrinking.

Condition: like new (used), functionality: fully functional, input voltage: 400 V, input current: 206 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP55, Exact type designation: ABB ACH580-01-206A-4+B056 Output power and output current: Chedpjw Euwbefx Abbjf 110kW | 206A ° With test seal! ° Was already installed, but has 0 operating hours ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Only 1 unit left in stock! This item has been reset to factory settings and is therefore in its original delivery condition. Please refer to the original product images for the visual condition. Functional and ready for immediate use.

Condition: good (used), Piston compressor Motor power: 18 kW / 24 HP Cjdpfxsvv Rpcs Abbshf Unfortunately, the compressor does not have a nameplate, so I do not know the exact air delivery.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,220 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, MAN 8x2 35.470 Crane F710 RA2.26 Winch preparation available * the exact equipment of the chassis and the crane is available on request Chjdpfxewd Aqge Abbsf Crane: New crane type FASSI F710 RA 2.26 endless rotating, completely assembled, installed and parameterized, with 6 hydraulic extensions on the knuckle boom. * Cable winch preparation * 6 x crane support plates with brackets * Radio remote control * Hydraulic outriggers Superstructure: Platform version Length approx. 6220 mm x width x 2480 mm * Container locks * Removable Suer aluminum drop sides 600 mm high * 8 x retractable lashing eyes per side 2500 daN * 3 x rows of Multifix stanchion pockets each approx. 600mm * 3 x retractable lashing eyes per side 6500 daN * 5 pcs. Toolboxes, aluminum checker plate version The detailed vehicle equipment is available on request For further information please do not hesitate to contact us

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,220 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, MAN 8x2 35.470 Crane F710 RA2.26 Winch preparation available * the exact equipment of the chassis and the crane is available on request Crane: New crane type FASSI F710 RA 2.26 endless rotating, completely assembled, installed and parameterized, with 6 hydraulic extensions on the knuckle boom. * Cable winch preparation * 6 x crane support plates with brackets * Radio remote control * Hydraulic outriggers Chsdpfxev Trzzo Abbef Superstructure: Platform version Length approx. 6220 mm x width x 2480 mm * Container locks * Removable Suer aluminum drop sides 600 mm high * 8 x retractable lashing eyes per side 2500 daN * 3 x rows of Multifix stanchion pockets each approx. 600mm * 3 x retractable lashing eyes per side 6500 daN * 5 pcs. Toolboxes, aluminum checker plate version The detailed vehicle equipment is available on request For further information please do not hesitate to contact us

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,220 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, MAN 8x2 35.470 Crane F710 RA2.26 Winch preparation available * the exact equipment of the chassis and the crane is available on request Crane: New crane type FASSI F710 RA 2.26 endless rotating, completely assembled, installed and parameterized, with 6 hydraulic extensions on the knuckle boom. * Cable winch preparation * 6 x crane support plates with brackets * Radio remote control * Hydraulic outriggers Superstructure: Platform version Length approx. 6220 mm x width x 2480 mm * Container locks * Removable Suer aluminum drop sides 600 mm high * 8 x retractable lashing eyes per side 2500 daN * 3 x rows of Multifix stanchion pockets each approx. 600mm * 3 x retractable lashing eyes per side 6500 daN Chedovw Hi Ispfx Abbef * 5 pcs. Toolboxes, aluminum checker plate version The detailed vehicle equipment is available on request For further information please do not hesitate to contact us