Used Honer Exact for sale (590)

Condition: used, This listing is for a Schott Halogen HT2 Stirrer Hotplate The unit is in full working condition and is ready for immediate release. Key Features & Specifications While exact values for the “HT2” designation are not widely published, the listed SLR Halogen model gives a very good indication of typical performance: Heating surface: glass/ceramic top plate (≈16 cm diameter in one listing). Maximum plate surface temperature: up to ~500 °C. Stirring range: approximately 10 – 1,100 rpm (in one listing). Compact dimensions: one listing shows ~24 × 37 × 9 cm (W×D×H). k Suitable for use with a retort rod. Ncodexv Aa Nepfx Adtjl

Condition: used, This listing is for a Hirschman pipetus with charger station The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated colour display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Njdpfx Adexv Dznstecl Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, This listing is for a Hirschman Pipetus 100 Rechargeable Pipette Controller The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated color display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Ncsdpfxexv Ax Ss Adtol Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, This listing is for a Techne Dri-block DB3 Heat Block . The unit is in full working condition and is ready for immediate release. The Techne Dri-Block Heater DB-3 is a highly efficient laboratory-grade heating device designed to offer precise temperature control for a variety of applications. Its robust features make it ideal for researchers and laboratory personnel seeking reliable heating solutions. Key Features: Temperature Range: The Dri-Block Heater DB-3 operates within a range from ambient temperature to 100°C (32°F to 212°F), accommodating a wide variety of heating needs. Fast Heat-Up Rate: The device can heat from 30°C to 100°C in approximately 15 minutes, reducing waiting time and increasing efficiency in laboratory workflows. Temperature Stability: It boasts impressive stability specifications, with a temperature accuracy of ±0.1°C at 40°C and ±0.15°C at 100°C. This precision is critical for experiments requiring exact temperature conditions. Temperature Setting: The user-friendly interface consists of three push-button controls paired with a 4-digit LED display, allowing users to set temperatures with a 0.1°C resolution for fine-tuning. Max Temperature Variation: Designed for uniform heating, the maximum temperature variation is limited to 0.2°C between blocks at 40°C, ensuring consistent results across different samples. Number of Blocks: The Dri-Block Heater can accommodate up to three aluminium alloy insert blocks, enabling simultaneous heating of multiple samples or different types of samples. Overall Size: The compact dimensions of the DB-3 are 279 x 260 x 105 mm (L x W x H), making it suitable for space-constrained laboratory environments while still providing ample heating capacity. Applications: The Techne Dri-Block Heater DB-3 is versatile and can be used for a range of laboratory and research applications, including: Incubation: Ideal for incubating biological samples under controlled temperatures. Ncedpfx Adjxxz N Ijtsl Boiling: Suitable for processes requiring boiling solutions efficiently. Inactivation: Useful for inactivating enzymes or pathogens in samples. Wet Ashing: A useful tool in sample preparation for elemental analysis. Sample Concentration: Facilitates concentrating samples by gentle heating. Enzyme Analysis: Maintains specific temperature conditions for enzyme studies. Nucleic Acid Hybridizations: Supports temperature-controlled hybridization necessary for nucleic acid experiments. Key Benefits: Precise Temperature Control: The high degree of control and stability ensures reliable results. Fast Heat-Up Rate: Saves time in laboratory procedures, enhancing productivity. High Temperature Stability: Reduces variability in experimental conditions, leading to more accurate outcomes. Lightweight and Compact Design: Fits conveniently in various lab settings, preserving valuable workspace. Accepts Multiple Insert Blocks: Increases versatility by allowing customization based on specific protocols or sample types.

Condition: used, This listing is for a Kern PCB 250-3 Balance. The unit is in full working condition and is ready for immediate release. The Kern PCB 250-3 is a Precision Laboratory Balance that is highly accurate, fully programmable and comes with a range of advanced features for precise record keeping and weighing. The balance is suitable for weighing and counting even the smallest parts. The balance is supplied with an 81mm weighing plate. A built-in recipe function makes determining the exact measurements of a mixture as easy as possible. This mode will allow you to weigh the specific parts of a mixture, record each value and recall your measurements afterwards for reference. Pre-tare function - manually subtracts known container weights Fully programmable - configure the balance to measure in special units such as length of thread g/m, paper weight g/m² or similar Percentage determination - store a given weight value (100%) and determine deviations from the target value Nedsxx Atzepfx Adtecl CAL EXT function - adjust the balance's accuracy with an external adjustment weight RS232 interface - allows the balance to interface with a PC or printer GLP/ISO record keeping of weighing data with date, time and identification number Dedicated Recipe function logs the weight of a tare container plus the recipe's ingredients % Determination mode - calculates % deviations from a target value (100%) Vibration-free weighing - filters out vibrations to maintain stable weight results Supplied with a weighing range of 250g Manufacturer's part: Kern PCB 250-3

Condition: used, Year of construction: 2009, total height: 2,900 mm, Empty weight: 14.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Ncsdpfx Adjx Dil Ijtsl These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-03-31 - Details: - └ Description: Excluding tools - Year: 2009 - Documentation available: Yes - CE certificate present: No - Serial number: 113253 - Number of milling spindles [pcs.]: 1 - Drilling unit present: Yes - Tool changer positions [pcs.]: 24 - Table length [mm]: 4500 - Working range X [mm]: 4500 - Working range Y [mm]: 260 - Z-axis working range [mm]: 150 - Voltage [V]: 400 - Current consumption [A]: 63 - Fuse [A]: 80 - Power [kW]: 32.0 - Transport weight [kg]: 14000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2001, Empty weight: 5.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 Nsdpfx Adexbzg Eetocl - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AL/6222 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 18 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 14 - System/software: Xilog plus - Safety feature: Bumper guard - Voltage [V]: 400 - Current consumption [A]: 32 - Power [kW]: 26.0 - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2009, operating hours: 2,216 h, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Njdpfxex Aq Dpe Adtecl These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-01-19 - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 26 - Operating hours: 2216 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Corner rounding unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm capacity 90 degrees: flat 700 x 410 mm capacity 45 degrees: round 410 mm capacity 45 degrees: flat 500 x 410 mm capacity 45 degrees: round links 410 mm capacity 45 degrees: flat links 430 x 410 mm capacity 30 degrees: round 320 capacity 30 degrees: flat 320 x 410 15 - 150 m/min workpiece weight max. 250 kg/m kg 5,5 kW 3200 kg 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering electric saw feed with ball screw: - highest cutting performance and quality, while being gentle on the saw band - Consistent use of the most modern recirculating ball bearing systems: - smooth-running, highly resilient, low-maintenance and play-free - Unique and patented double miter system: - Material is always clamped at right angles Furnishing: Njdpfx Adjx Sr Drstecl - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic material full stroke clamping - Automatic movement of the vices - Saw frame height adjustment automatically - Minimum speed and saw band monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA pliers insertion system from 5-2300 mm per stroke with integrated roller conveyor *Special equipment: - Laser light for cutting line display/marking saws - Chip brush driven - Micro dosing system - Clamping pressure regulation - Material bundle tension - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip disposal, 2000 mm long - Cutting progress control

Year of construction: 1945, condition: used, New: No Nedpfxowz H Uqj Adtscl Serial number: 15 HP LISTER DIESEL TAKEN OUT AN OLD ALUMINIUM SLOOP EXACT AGE UNKNOWN.

Condition: like new (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm weight of the machine ca. 6500 kg required space 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Center (Year of Manufacture: 2001) The MIKRON VCP 600 is a precise 3-axis CNC vertical machining center, ideally suited for high-accuracy machining of complex workpieces. With its robust construction, high-performance spindle, and reliable Heidenhain control system, it meets the highest standards in both single-part and series production. All specifications are provided without guarantee. Exact technical details will be provided at the time of purchase. Control system: TNC 426/430 Travel Paths X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Maximum table load: 400 kg Number of T-slots: 6 Njdpfxjwmzgfj Adtscl T-slot spacing: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool holder: HSK-A63 Tool Changer Number of tool positions: 30 Max. tool diameter: 90 mm Max. tool diameter with adjacent slots empty: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and Rapid Traverse Feed rate: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Installation dimensions (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm table height 750 mm feed 5 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 capacity 30 degrees: flat 170 x 335 15 - 150 m/min workpiece weight max. 250 kg/m kg Ncjdpsulnb Dofx Adtsl 3,0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 124 mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1.010 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale Nedoxaaanepfx Adtscl - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever

Condition: used, Year of construction: 2017, turning length 4000 mm turning diameter 850 mm turning dia. in gap 1150 mm turning diameter over slide 520 mm turning speeds 5.0 - 630 U/min quill: 6 MK quill travel 250 mm spindle bore 100 mm workpiece weight max. 4000 kg bed width 600 mm travel -x axis 500 mm travel -z axis 3700 mm rapid traverse X 1800 mm/min rapid traverse Z 3640 mm/min feeds X : 0.04 - 4.8 mm/min feeds Z : 0.08 - 9.6 mm/min feeds Z1 : 0.02 - 2.4 mm/min engine output 20.0 kW weight of the machine ca. 6800 kg. dimensions 6150 x 1500 x 1500 mm good / well-maintained condition (!!) original price at the time approx. 65.000 euros special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: Ncsdpfx Adoxabh Totol - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection - Coolant device - Machine leveling feet - Work light - Operating tools - Operating instructions

Condition: used, This listing is for a Varian Autosampler Model 410 unit on it's own. The Varian ProStar 410 HPLC Autosampler has variable injection volumes and automixing/autodiluting. The ProStar 410 is perfect for laboratories with changing needs. It provides flexible operation without sacrificing reliability or performance. Multiple injection modes for flexibility, ease of use, and precision. Full loop filloverfills the sample loop for maximum precision. Partial loop fill allows easily programmed variable injection volumes. Microliter pickup withdraws the exact amount to be injected without sample loss. The Varian ProStar 410 AutoSampler offers the best of both worlds. It is intelligent for research applications yet rugged enough for routine quality control work. With Pressure Assisted Sampling Aspiration (PASA), the Varian 410 ProStar AutoSampler applies pressure within the vial while the sample is withdrawn by a high-resolution syringe. Air bubbles and in-vial vacuum problems are eliminated resulting in excellent reproducibility. Flexibility with multiple injection modes Optimal performance with integrated column oven Biocompatible and sample cooling options available Specifications: Standard sample tray 84 x 1.5 mL vials with 3 x 10 mL vials Optional sample trays 96 x 2.5 mL vials or 24 x 10 mL vials Dispenser unit 50 µL syringe standard; 1000 µL or 2500 µL syringes, optional Injection volume 1 to 5000 µL with preparative option up to 10 mL Injection methods nine methods in memory Needle wash integrated, programmable large reservoir Vial detection Yes Reproducibility Full Loop: < 0.3% RSD Partial Loop: < 0.5% RSD Microliter Pickup: < 1.0% RSD Carryover < 0.05% Optional sample cooling 4°C to 15°C programmable Can be refurbished on request, refurbishment not included in price. Ncjdexzh Amspfx Adtel

Condition: used, Holac Industrial Dicing Machine – VA Series (VA 90 / VA 120) Manufacturer: Holac Type: Industrial Dicing / Cubing Machine Model: VA Series (exact model to be confirmed) Availability: Direct Description This Holac industrial dicing machine is designed for high-capacity and precise cutting of a wide range of food products. The machine is equipped with a robust worm feed system, ensuring consistent product flow and uniform cutting results. Suitable for cutting products into cubes, strips or slices, depending on the installed knife set. Ideal for meat, cheese, vegetables and plant-based products. The machine is fully stainless steel, hygienically designed and easy to clean. Equipped with an original Holac Panelware control panel. Key Features - High-capacity industrial dicing machine - Continuous worm feed system - Interchangeable knife grids for different cutting sizes - Suitable for fresh and lightly frozen products - Solid stainless steel construction - Reliable and proven Holac technology Technical Specifications (approx.) - Capacity: up to 1,500 – 3,000 kg/hour (product dependent) - Cutting sizes: approx. 5 x 5 mm up to 40 x 40 mm - Product temperature: fresh to approx. -2 / -3 °C Ncsdsx Ti Hmopfx Adtjl - Power supply: 400V / 50 Hz - Installed power: approx. 5.5 – 7.5 kW - Material: stainless steel (food grade) Applications - Meat (fresh or lightly frozen) - Cheese - Vegetables - Plant-based products - Convenience & pet food - Machine is in good working condition and ready for production. Video available on request. 📍 Located in the Netherlands 🌍 Worldwide delivery possible The information contained in this advertisement is for general information purposes only. Although care has been taken to ensure accuracy, no liability is accepted for any errors or omissions. Specifications are subject to change.

Condition: used, Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary encoder Ncjdjqz Ai Nepfx Adtel -Manufacturer: Stegmann, rotary encoder encoder -Type: K. unfortunately no exact type designation can be read -Voltage: see photo of nameplate -Shaft: Ø 6 x 30 mm -Dimensions: Ø 90 x 140 mm -Weight: 1.0 kg

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator Manufacturer: MS, Ultrasonic welding generator -Type: SoniGEN 35/1000 or similar, unfortunately no exact designation -Power output: kVA Ncsdpfx Adsxxkbaetsl -Dimensions: 460/150/H150 mm -Weight: 5.5 kg

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley Ncsdsw Uvv Ajpfx Adtel -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 52 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1 piece available -Dimensions: 220/123/H160 mm -Weight: 9 kg

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm Nsdpfx Adsw Uy Uietjcl -Weight: 8.5 kg

Condition: good (used), Servo motor, geared motor, electric motor, micro geared motor, mini geared motor, DC motor with planetary gearbox -Manufacturer: Nucleus, servo motor with gearbox, micro geared motor Nsdoxzzbpspfx Adtscl -Type: unfortunately no exact type designation -Item No.: FUK1101 -Tension: -Shaft: Ø 20 mm / M8 -Number: 9x geared motors available -Price: per piece -Dimensions: Ø 40 x 170 mm -Weight: 0.5 kg/pc.

Condition: used, Compressed air filters, fine filters, filters, flange filters, compressed air microfilters -Manufacturer: Domnick Hunter, compressed air filter -Type: unfortunately no exact type designation -Dimensions: see photos -Dimensions: 270/150/H495 mm Ncjdpfxoq Av Upo Adtel -Weight: 7 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Karl Klein, blower radial fan -Type: DNG 6 unfortunately no exact type designation -Engine: Emod 71/S2 -Speed: 2900 rpm -Volume output: m³/min -Fan wheel: Ø 160 x 85 mm -Connection input: Ø 125 mm -Connection output: 120 x 110 mm -Quantity: 1 piece available Nsdpfx Adouqf Urstscl -Dimensions: 350/270/H340 mm -Weight: 9.1 kg

Condition: used, Ventilation system, comfort compact ventilation, ventilation control, ventilation device control -Manufacturer: Aircool WGB control ventilation device -Type: unfortunately no exact type designation -Individual components: see photos Nsdpfx Ajqmt Avjdtocl -Quantity: 19x controls available -Price per piece -Dimensions: 380/240/H415 mm -Weight: 14.7 kg/pc.

Condition: used, Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Bossler, radial fan -Type: unfortunately no exact type designation, see photo -Speed: 2820 rpm Njdpfx Aeuncyajdtscl -Power: 0.55 kW -Protection class: IP 54 -Connection input: Ø 155 mm -Dimensions: 300/280/H300mm -Weight: 10.4 kg