Used Homag Panel Saw for sale (471)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Iodsxxal Iopfx Ah Hsbd Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 5 Unit: Top milling unit Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-15-4101, travel distance X-axis: 535 mm, travel distance Y-axis: 535 mm, travel distance Z-axis: 535 mm, spindle speed (max.): 24,000 rpm, tool diameter: 280 mm, Equipment: chip conveyor, 5-Axis Machining Center with Chip Conveyor! Bidding obligates the buyer to collect the item by 14.10.2025 at the latest! TECHNICAL DETAILS Travel paths Travel range X-axis: 535 mm Travel range Y-axis: 535 mm Travel range Z-axis: 535 mm Feed speed X/Y direction: up to 60 m/min Feed speed Z direction: 30 m/min Spindle Head Spindle power: 12 kW Spindle speed: 1,500 - 24,000 rpm C-axis swivel range: -220 - +220 ° A-axis swivel range: ° Coolant temperature: 15 - 45 °C Tool Magazine Tool holder: HSK-F63 Interface: HOMAG Interface 9-002-04-3360 Number of tool positions: 18 Pitch circle diameter: 760 mm Max. total toolholder weight: 90 kg Max. weight per tool: 10 kg Tool diameter: 280 mm Max. tool height: 320 mm Clamping Cylinder Lower clamping plates: 70 × 90 mm Upper clamping plates: 77 × 100 mm Piston rod diameter: 25 mm Clamping height above console: 100 mm Lift – support cylinder: 55 mm Clamping force: 1,300 N Max. workpiece height: 80 mm Return: manual Drilling Unit with Slotting Tool Iedpfxexhgpfe Ah Hobd Drill tool speed: max. 6,000 rpm C-axis swivel range: ± 360° Tool holder for drill tool (rotating): Ø 11.55 mm Tool holder for slotting tool (fixed): Ø 18.95 mm Weight (mounted): 3.5 kg Chip Conveyor Discharge height with incline conveyor: 1.3 m Discharge height without incline conveyor: 0.3 m Max. scrap piece size: 300 × 300 mm EQUIPMENT Chip conveyor Eagle Eye laser projector 40 tools Numerous additional accessories

Year of construction: 2011, condition: ready for operation (used), This profile bending machine was manufactured in 2011. It features an automatic transport system for semi-finished LVT panels, with processing capabilities ranging from 500 mm to 2000 mm in length and 140 mm to 600 mm in width. The system includes longitudinal and cross machines, each equipped with 6 milling motors, ensuring precise profiling. If you are looking to get high-quality profiling capabilities, consider the HOMAG PROFI FPL 525/6/04/PW/V LVT machine we have for sale. Contact us for further details. Ibodpfxjxuld Ie Ah Hsd Application Types Complete Production

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Ibsdpfxjw Dc Nis Ah Hjd Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: used, Repair-needing Wide Belt Sander, Surface Grinding Machine, Sheet Metal Deburring Machine, Deburring Machine with 4 Processing Stations Sanding Unit and Brushing Deburring Unit Manufacturer: BÜTFERING - STEELMASTER Type: Frima-V/413RRTT Machine No.: 76 931 Year of Manufacture: 2002 2x Brushing Deburring Units + 2x Sanding Units Max. working width: 1350 mm Conveyor belt width: 1370 mm (heavily worn on the sides) Working thickness: 0.3 mm to 150 mm Sanding Units Abrasive belt dimensions: 1350 mm x length ?? mm Abrasive belt motor (1): 11 kW (speed 2930 rpm) Abrasive belt motor (2): 12.5 - 16 kW (speed 1470 - 2950 rpm) - Abrasive belt speed (belt 1): only at high speed - Abrasive belt speed (belt 2): 2 speed settings - Pneumatic belt tensioning Brushing Deburring Units with multiple vertical sanding discs and oscillation 2 roller brushes Ø 250 mm Isdsw Ed Uvepfx Ah Hobd Roller width: 900 mm Brush speed: approx. 1440 rpm Deburr brush motor (3): 7.6 - 9.5 kW Deburr brush motor (4): 7.6 - 9.5 kW - Sanding disc speed (3): 2 speed settings - Sanding disc speed (4): 2 speed settings - Oscillating movement of brush rollers via gear motors - 2 separate drive motors, one for each brushing station Conveyor Feed Unit Conveyor motor power: 0.75 kW - Infinitely variable conveyor speed via frequency converter - Motor-driven height adjustment for material thickness 0.3 - 150 mm Power supply: 400 Volt, 50 Hz, 55 kW Machine footprint: Length 300 x Width 270 x Height 210 cm Required space for transport: Length 600 x Width 242 x Height 210 cm Weight: approx. 5.5 tons The machine was operated with wet grinding; belt filtration system integrated in the machine frame The machine is in poor condition, was taken out of production, and stored under tarpaulin for approx. 5 months. Technically, everything still appears to be in reasonable shape, but improper storage has led to some rust formation. The machine requires refurbishment.

Condition: used, Year of construction: 2008, total length: 7,500 mm, total height: 1,800 mm, total width: 970 mm, Weight: 5.500 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: - Number of units [pcs]: 8 - Voltage [V]: 400 - Current consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 7500mm x 970mm x 1800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Ibedpfxsxakluo Ah Hsd Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Ibodoxw T H Nepfx Ah Hjd Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Ijdexgrfpspfx Ah Hjbd Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-200-10-2728, For sale is a Homag KL 79 edge banding machine from 2010 in very good, fully operational condition. The machine offers comprehensive features for demanding edge processing and is immediately ready for use in production. Key features at a glance: • Two gluing units for maximum flexibility in edge processing • Axis-controlled profile routers for precise and reproducible results • Multi-scraper for perfect edge finishing • Axis-controlled corner copying unit – ideal for complex workpiece geometries • Flat scraper and buffing unit for excellent surface quality • Swiveling jointing unit, suitable for large tool diameters up to 150 mm • Feeder for overhead parts ensures a right angle during processing Available additionally and not included in the price: • PUR pre-melter for processing PUR glue • Return system (no longer available) Condition: The machine is in well-maintained condition, has been serviced regularly, and is currently in operation – inspection under power can be arranged by appointment. Important: Only the edge banding machine is for sale at the listed price. Ibodpfxewhggmj Ah Hjd

Condition: excellent (used), functionality: fully functional, total length: 9,300 mm, overall weight: 4,000 kg, Feed infinitely variable from 18–24 m/min For edge material from rolls or as strips up to 20 mm edge thickness Transport chain 80 mm wide with rubber coating Workpiece support – scissor-type, extendable up to 1000 mm Infeed extension 500 mm Feeding device with two driven, angled rollers Iedpfow Sdlmox Ah Hjbd Processing units: Jointing cutter unit with 2 motors, each 3 kW Gluing unit A20 Trimming unit HL83, chamfer/straight with 2 motors, each 0.5 kW Pre-milling unit with 2 motors, each 1.5 kW Contouring/milling unit FK, 8-position automatic, with 2 motors each 0.55 kW Multi-stage finish sanding unit MN, automatic Finish sanding unit for glue joint Buffing unit above and below with oscillation Chip conveyor belt Electronic frequency inverters for processing units HOMATIC control system with NC21 input module Good condition of the machine.

Condition: good (used), Working width from 190 to 2600 mm Workpiece thickness 8 - 90 mm Working height 90.5 cm Equipment: 1. Scoring saw 1.5 kW, controlled 2. Cutter 4.5 kW, tiltable by 15 degrees 3. Milling motor 4.5 kW with electropneumatic control for plunge milling Ijdpfxexrx Uuj Ah Hsbd

Condition: good (used), Year of construction: 2019, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 850 mm, feed length Z-axis: 56 mm, power: 10 kW (13.60 HP), Homag drilling and milling machine Very compact machine Commissioned 6/2/2019, first owner Always maintained by Optimat, all invoices available Barcode scanner 13 vertical drills, quick-change system (left / right) 4 horizontal drills in X direction (left / right) 2 vertical drills in Y direction (left / right) Ibsdexpnkgopfx Ah Hod 1 groove saw 100mm in X direction 4 tool changer positions for HSK63 router 10kW Workpiece length 200mm to 3050mm Workpiece width 70mm to 850mm Workpiece thickness (8)12mm to 56mm Machine measures each workpiece on X Y and Z, so incorrect workpieces cannot be input. Woodwop control Works perfectly, can be seen in operation. Available January 2026 Selling due to purchase of V310 Tools not included 400V Can be loaded with forklift. Price 44,500 excl. VAT

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Ibodjwuuf Rjpfx Ah Hjd Position 2: bordatriceLottoUno HOMAG-PROFI KAL330/7/A3/WZ Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ

Year of construction: 2010, condition: ready for operation (used), Main Drive Ibsdpfx Ahjxpywls Hod Spindle motor power 15 kw Additional Equipment Gluing unit Tool changer (18-fold) Boring head (30 spindles) FLEX-5 unit This HOMAG OPTIMAT BAZ222/60/K was manufactured in 2010. A robust woodworking machine featuring a main spindle of 15 KW, an 18-fold tool changer, and a 30 spindle boring head. Additional features include a 6 KW milling spindle and a FLEX-5 unit. A great opportunity to buy this HOMAG OPTIMAT BAZ222/60/K woodworking machine. Contact us for further details regarding this woodworking machine. Application Types CNC Wood Machining

Condition: used, Year of construction: 2007, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 0-250-21-0442, travel distance X-axis: 3,850 mm, travel distance Y-axis: 2,015 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 3,850 mm, feed length Y-axis: 2,015 mm, feed length Z-axis: 80 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, Equipment: documentation/manual, Sale of a CNC machining center that is fully operational and has been completely overhauled. Homag Weeke Venture 5 Optimat BHC 550 In 2024, extensive maintenance measures were carried out. The main spindle was completely refurbished. Additionally, a new UPS and a new vacuum pump were installed. The frequency converter was also replaced. The offer also includes a Flex 5 aggregate (not required for standard operations); however, this unit is non-functional but a repair quote is available. Specification sheet for the Weeke Venture 5 Optimat BHC 550 (year of manufacture: 2007) Main technical data Dimensions & Weight Length: approx. 6,350 mm | Width: approx. 2,550 mm | Height: approx. 2,450 mm | Weight: approx. 6,500 kg • Processing Area (X, Y, Z) X-axis approx. 3,250 mm | Y-axis approx. 1,300 mm | Z approx. 150 mm • Main Spindle Power: 12 kW, liquid-cooled Tool holder: HSK-F63 Speed steplessly programmable from 1,250 to 24,000 rpm • Drilling Units & Milling o Vertical: 25 spindles (32 mm pitch), depths up to 38/55 mm, tool holder diameter 10 mm, max. drill diameter 35 mm o Horizontal: 4 spindles in X-direction, 2 in Y-direction (32 mm pitch), depths up to 38 mm, max. drill diameter 20 mm o Grooving/Sawing unit: swivels 90° in XY-direction, cutting depth up to 30 mm, up to 7,500 rpm, max. tool diameter 1 mm • Workpiece Clamping & Table o Pod and rail table or console table with 6 adjustable supports in X-direction, LED display for position o Suction cups: e.g., 12 vacuum suction cups or various tubeless versions o Vacuum pump: approx. 100 m³/h • Tool Changer & Control o Tool changer: 14 positions front (X-direction) and 8 positions rear (Y-direction) o Control: POWERCONTROL PC 85T (TFT 17″), WOODWOP 5.0 software, incl. MDE and production lists • Additional Equipment & Safety o FLEX-5 interface for sawing/milling/drilling o Tool picking function (Pick-Up), safety mats, safety fence/doors, barcode scanner, etc. Ijdpfx Ahjxrcf De Hebd Additional technical key data from supplementary sources for 2007 • Work area: X ≈ 3,250 mm · Y ≈ 1,220 mm · Z ≈ 125 mm • Tool slots: approx. 16 positions • Vertical drilling spindles: 12 units • Horizontal drilling spindles: 4 in X, 2 in Y • Main motor: 12 kW, HSK-F63, speed up to 24,000 rpm • Other equipment: Pod-and-rail table, positioning aids, crosshair laser, LED display, HOMAG POWER CONTROL, WOODWOP 5.0 software, safety mats, handheld terminal, UPS, CE marking

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 0-201-76-6720, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 270 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BMG311 VENTURE316XXL 6m machine 10 consoles 6 stops at the rear 6 stops at the front Vacuum system 2 x 90/108 m³/h (50/60 Hz) LED position display system 5-axis main spindle 10 kW Drive5C Programming 5-axis spindle with WoodWop 18-position disc changer below Drilling head with 21 spindles: V17/H4/S0/90° Safety barrier on the left Viewing element barrier on the right VENT.+BMG+B200/300 Chip conveyor on the right PowerClamp pneumatic package for K+AP table Iedpsxw H Tcofx Ah Hebd Performance pack for Drive5C 9-position linear changer for BMG311 without FLEX5 Measuring probe for tool changer Visualization of vibrations on machining spindle collisionControl Barcode reader package VENTURE for 1D codes HOMAG GROUP control system PowerTouch WoodWop CAD plugin WoodWop CAM plugin Professional Machine WoodMotion

Condition: excellent (used), Year of construction: 2018, Used 5-axis CNC machining center including edge banding Manufacturer: HOMAG Model: PROFI BMG310/42/F/V/K Year of manufacture: 2018 Main spindle overhauled by Benz GmbH Working area X: 4200 mm (4375 mm with tool diameter 25 mm) Working area Y: 1350 mm for all units - Milling with tool diameter 25 mm: 1600 mm - PowerEdge: 1600 mm Iedpsw H Nzdofx Ah Hobd Workpiece thickness: 300 mm Equipment: - Speed Pack - 32-position disc tool changer (24+8) - 10-position disc tool changer - 8-position linear tool changer - Processing spindle 12 kW Drive5C - Spindle vibration visualization - Drilling head with 31 spindles: Vertical 21 / Horizontal 10 / 0° / 90° - Additional milling spindle 6 kW for drilling head - Blowing nozzle for workpiece edge, 60 mm - PowerEdge edge banding unit - Pre-trimming station and double roller BMG310/V - Additional roll plate for pre-trimming station KH 65 mm - Pneumatic lift for drive spindle - Saw/trimming unit for tool changer - Combination flush trimming and scraper unit - LED positioning display system - PowerClamp fixture interface for console table - Dynamic nesting management - Vacuum system 290/345 m³/h - PowerControl PC87 Powertouch - Collision control - Tool length measuring system - WoodWop component Lamello Clamex-P - Chip conveyor - SafeScan for Speed Pack BMG And much more. Complete technical data available in the attached PDF document.

Condition: used, 1 piece roller table, make Homag, type TD01-30/08, year of manufacture 1977, serial no. 0-800-27-0002, working width approx. 3 m, length approx. 2 m, with transfer station, roller conveyor, approx. 4x1 m Category: Machinery and Technical Equipment Iodexuvv Uopfx Ah Hjbd Sale subject to confirmation: The sale of this item is subject to confirmation and is independent of reaching the minimum price. A decision regarding the sale will be made as soon as possible.

Condition: used, machine/vehicle number: 008121, Type of edging: Thin edge, Thick edge, Solid wood Ibodpfx Aew Idhteh Hsd Gluing System: PUR Corner Rounding Unit: yes Max Panel Width: 3000 mm Max feed speed: 32 m/min Operating Units Right Side: 10 nr Operating Units Left Side: 10 nr

Condition: good (used), Year of construction: 2008, functionality: fully functional, 4-axis machining center Homag Optimat BOF 311 venture 15 XXL New spindle Machine in excellent condition Iedew A R D Eopfx Ah Hjbd Can be inspected in department 14 Dismantling, loading and transport at buyer's expense

Condition: ready for operation (used), Year of construction: 2010, This HOMAG KAL 310/7/A3 was manufactured in 2010. A used single-sided edge banding machine featuring a 28-position ISAS edge magazine, PU gluing unit, and Boomerang return system. It includes a joint milling unit with two motors and a PU 34 gluing system with a capacity up to 6 kg/h. Ideal for precise edge banding applications. Contact us for more information about this machine. Application Types Iedpfx Ahoxn Uwqo Hsbd Edge Banding

Condition: used, 1 unit Single-sided edge banding and formatting machine, manufacturer Homag, model Kanomit KFL 54/16-QA-2+500, year 1988, serial no. 0-202-24-0375, fixed fence on the left, working height 895 mm, minimum working width 85 mm, workpiece thickness 8-60 mm, part feed system working width 260-2,800 mm, various magazines, recorded operating hours: 16,424, control unit, control cabinet, total length approx. 18 linear meters. Metal detector on the left, standard milling unit, chipping unit, extraction hood, hot melt glue unit, noise protection enclosure, glue station, special trimmer unit, pre-milling unit, milling unit, control cabinet type SO 4500x1800x400 mm, with roller feed table by Homag, type 001/15/20/S, serial no. 0-205-24-0374, year 1986, approx. 2x2 m. Category: Woodworking Sale subject to confirmation: The acceptance of this item is subject to confirmation and not dependent on reaching the minimum price. A decision regarding the acceptance will be made as soon as possible. Ibodpfx Ahoxuvvns Hjd

Condition: used, machine/vehicle number: 007793, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Ibedpfx Aov Tfydsh Hed Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 60 mm

Year of construction: 2015, condition: ready for operation (used), This 4-axis HOMAG PROFI BMG 511/60/12/R was manufactured in 2015. A robust CNC processing center featuring an 18-position tool changer, a drilling head with 30 spindles, and a dynamic table area allocation. It boasts a main milling spindle with a power of 12 kW and a speed range up to 24,000 rpm. Ideal for complex woodworking tasks with its extensive working area of 6,000 x 1,550 mm. Contact us for more information about this machine. Application Types Iedsxn Uwkjpfx Ah Hobd CNC Wood Machining

Condition: used, 1 pc. double-sided edge banding machine, manufacturer Homag, model KF 64/5/20, year of manufacture 1977, serial number 0-064-08-0003, length approx. 6 m, max. working width approx. 2 m. Category: Woodworking Iedoxuvu Rjpfx Ah Hebd Sale subject to confirmation: The sale of this lot is subject to confirmation and not dependent on achieving the minimum price. A decision regarding the sale will be made as soon as possible.