Used Hole Washers for sale (4,849)

Year of construction: 2026, condition: new, Messan P07 - Pneumatic press for hole punching in reinforcement sheet iron - Working system - pneumatic - Opens holes for handle and lock holes - Punching molds are changeable Dksdpfxezugwco Aa Hst - Maximum thickness of the sheet iron 1.50 mm - Option - special mould for different forms

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Dedpfxsfzrapo Aa Hjkt ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Dsdpefz Ax Sofx Aa Hjkt High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Dkodpofz A D Nefx Aa Hst

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Dksdpfof Aaaljx Aa Het User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2025, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L102 Automatically operated hot water parts washing machine with basket drive via gear motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. - Basket diameter: 910 mm - Usable height: 520 mm - Max. loading weight: 200 kg - Spray pressure: 2 x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature - 90°C) System dimensions (L x W x H): 1,300 x 1,250 x 1,990 mm Empty weight: approx. 300 kg Wash cycle timer, freely adjustable (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Tank cover with fine filter (2,000 microns) 2 suction filters as pump protection Steam extraction system incl. condensate return Dkjdpohymmgjfx Aa Het This is an exhibition machine from the Glogar Technology Center.

Condition: good (used), Year of construction: 1995, Top-hole drilling machine, Grass ECO Press Year of manufacture: 1995 Serial number: 9502665 in good condition Right and left linear guides (Work table can be included) Weight approx. 45 kg 380 V - 50 Hz - 2.5 A Pneumatic connection - max. 6 bar Dkedpfok D T Ncsx Aa Hst CE marked

Condition: new, Year of construction: 2026, Ultrasonic cleaning system – ultrasonic cleaning unit Chamber made of stainless steel 1.4401 (AISI 316L) - including insulated hinged lid Dsdpolcctgofx Aa Hekt - including level monitoring/dry-run protection - including 1 stainless steel basket - Bottom-mounted ultrasonic transducers, frequency: 25 kHz, power (effective/peak): 500/1,000 watts - Heating adjustable up to 80°C; power: 5,000 watts - Basket dimensions: L x W x H 520 x 230 x 200 mm - Tank dimensions: L x W x H 600 x 300 x 270 mm - External dimensions: L x W x H 680 x 420 x 490 mm - Max. load weight of the basket: 20 kg - Unit is mobile

Condition: excellent (used), 0.75 kW motor Dsdstrtz Eepfx Aa Hokt Spindles 8 2 pneumatic clamps Pawl 6

Year of construction: 2026, condition: new, The fruit washer mill is made from stainless steel. Firstly, the operator of machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 1000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. Dodpfx Aeflpfbea Hjkt - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. It facilitates the process of pouring the products into the basin. - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - The speed of the belt conveyor is adjustable in the control panel. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. - Machine is easy to clean after using. - Powerful 2.2 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel.

Year of construction: 2026, condition: new, Specifications: - Performance: 3000 kg/h - Electric demands: 0,75 kW, 400 V, 16 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel Dksdpfsfd E Trsx Aa Hjt - Dimensions: 750x2100x2800 mm - Output height: 1820 mm - Weight: 135 kg - Tub water capacity: 280 L/shift - Washing water supply: (20-100L/h depending on the setting) - Water connection: 3/4“ quick connector - IP65 certified electronics The fruits go to the input hopper, after soaking the elevator towards the fruit under the secondary clearwater sprays. Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels. It requires minimal maintenance.

Condition: new, INTERSONIK shock absorber pipe washing machine is specially designed by INTERSONIK design and manifacture engineers. PLC controlled machine provides both very little process time and perfect cleaning and dryness. Some technical details about the machine: PLC controlled. High pressure stainless steel pump Heavy duty blower Very little cycle time Compatible with different diameters and lengths Pump filter system Ideal for the automotive industry. Dedpfx Asd R Az Rea Hekt Please feel free to contact us for other details. You can check our youtube channel and visit our website.

Condition: new, Year of construction: 2026, Drilling and dowel inserting machine for simultaneous drilling, gluing and dowel inserting in the of System 32 mm through multi spindle drillhead and adjustable doweling stations. Short introduction: • Universal drilling and dowel inserting machine Dkodpfx Aajdx Aw Ns Het • Simplest operation • Closed gluing system • Suitable for panel and solid wood processing • Optional, additional vertical drilling unit • Relieves CNC machining centers • Optimal complement to nesting machines

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) Dodpov Tm Ayofx Aa Hokt + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 56 kg, warranty duration: 24 months, input frequency: 400 Hz, SPECIFICATION: Model: KPC-5.5TP Dksdpfx Aaow Ickas Het Voltage/Hz: 400/50 Pressure (Bar): 200 Flow Rate (L/h): 900 Power (W): 7200 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, DIAMETER 18 mm STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS EQUIPPED WITH PROFESSIONAL ACCESSORIES, INCLUDING 4 NOZZLES OF DIFFERENT SPRAY ANGLES TO HANDLE ANY TYPE OF DIRT AND SURFACE FEATURES A PRACTICAL HOLDER FOR ACCESSORY STORAGE AND A PROFESSIONAL BRAIDED HOSE Advantages of a crankshaft pump with ceramic pistons: - Precise operation and very high efficiency – these pumps are indispensable in environments where reliability over many hours of daily operation is crucial. - Minimal component wear – ceramic pistons are far more durable than steel ones, so they require less frequent servicing. - Resistance to chemicals and variable temperatures – they perform excellently even when working with aggressive chemicals and hot water. - Smoother operation – the pump runs more quietly and generates less vibration, improving operator comfort. Low-speed Motor – Professional design: - 1450 RPM ensures lower component wear and reduced noise emissions. - Designed for heavy-duty operations, ideal for tasks requiring continuous and extended use.

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 1,750 mm, total length: 1,750 mm, total height: 1,700 mm, type of input current: three-phase, The HYDRO WASH 1200 2-in-1 automatic basket washer is a multifunctional device, enabling fully automatic cleaning of parts in a motor-driven rotary basket. For parts with more complex shapes, high-pressure washing at 140 bar is available. Thanks to the combination of these processes, this machine is versatile and can be used in any workshop. It is particularly suited for companies specializing in turbocharger, steering gearbox, and transmission refurbishing, significantly streamlining workflow. To ensure user safety and stable washing parameters, an electronic control panel and a range of integrated sensors are employed. Operating principle: Before the first use, fill the tank with washing fluid. The recommended fluid is a solution of MRS Cleaner Strong concentrate and water in the specified ratio. The Hydro Wash offers both manual and automatic washing modes. a) To activate automatic washing, prepare the device (fill with water and concentrate), close the metal glove cover, close the washer lid by simultaneously pressing two buttons (located at the front and rear of the device), and press the start button. *Basket rotation possible when the lid is open by pressing the right pedal button or simultaneously pressing the two buttons at the front and rear. The condition is that the metal glove cover must be closed.* b) To activate manual washing, close the washer lid by pressing the two buttons (front and rear) simultaneously. Open the metal glove cover and press the left pedal button. STANDARD EQUIPMENT: - Lid interlock sensor for safety when opened during washing - Liquid level sensor to protect against dry operation - Liquid temperature sensor - Adjustable spray arms with nozzles made from stainless steel by Spraying System Dsdjxm Ullepfx Aa Hokt - Mechanically driven rotary basket - High-pressure pump (140 bar) - Compressed air gun - Pressure regulator with water separator - Coarse mesh filter for insoluble contaminants (0.8 mm mesh size) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic cylinders Technical Data: - Basket diameter: 1200mm - Working height: 500mm - Basket load capacity: 300kg - Programmable cycle time: 0–99 min - Washing temperature: 60℃ - Heater power: 12kW - Tank capacity: 400l - Spray rate: 200l/min - Working spray pressure: 4.5–6 bar - Manual washing pressure: 140 bar - Overall width: 1750mm - Overall depth: 1750mm - Overall height: 1700mm (2450mm with lid open) - Power supply: 3~400V Optional equipment: - Belt oil skimmer - Low-pressure lance kit - Reinforced pump OTHER DIMENSIONS OF HYDRO WASH 2-IN-1 WASHERS AVAILABLE! MODELS 800 AND 1000 ALSO IN STOCK. CONTACT US FOR DETAILS ON OTHER MODELS.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, empty load weight: 34 kg, fuel: super 95, warranty duration: 6 months, KARCHER HD 801 B COLD WATER PRESSURE WASHER This device features new accessories, including a pressure gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. The highly efficient Honda GX160 combustion engine ensures stable operation even during prolonged use. With operating parameters of 150 bar and 650 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power: Petrol Engine: Honda GX 160 Flow rate [l/h]: 650 Working pressure [bar]: 150 Maximum pressure [bar]: 160 Weight [kg]: 34 Dimensions (L x W x H) (mm): 1044 x 542 x 662 Hose length [m]: 10 Dksdoxrtctepfx Aa Het EQUIPMENT: NEW durable pressure gun NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Dedpswplgbefx Aa Hokt Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, overall weight: 56 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 1020 B NEW LIFAN 190 F (15KM) COMBUSTION ENGINE The device has new accessories, including a pressure gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient Lifan 190 F combustion engine ensures stable operation even with long-term use Thanks to the operating parameters of 200bar and 800l/h, the machine can be effectively used for heavy work in construction, the logistics industry and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: Combustion Engine: LIFAN 190 F 15 HP Pressing capacity [l/h]: 800 Working pressure [bar]: 200 Maximum pressure [bar]: 250 Weight [kg]: 56 Dimensions (length x width x height) (mm): 1044 x 582 x 668 Hose length [m]: 10 Dksdswwhinspfx Aa Het EQUIPMENT: NEW LIFAN 190 F (15HP) COMBUSTION ENGINE NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle GEKa water filter and claw couplings - FREE KEY FEATURES: Open oil system - no operating time limit Very legible and intuitive control panel Simple design and good access to individual components under the housing make the machine user-friendly and easy to service

Condition: new, Year of construction: 2026, functionality: fully functional, Mobile high-pressure waste container washers Autonomous container unit, independent from the chassis. Specifications: - Hydraulic lifting and lowering, - Washes either two small containers (120–240 L) or one large container (1100 L), Dkedpswmln Tjfx Aa Hot - Two washing nozzles, - Programmable washing cycles, - Honda engine or equivalent, - Power generator Low operating costs: - 3.5 t permissible gross vehicle weight for the chassis, - Only a few liters of petrol for an entire working day, - Water recycling system (average 800–1000 liters per day), - Up to 100–150 containers (120–240 L) cleaned per day, - Biodegradable cleaning and disinfecting agents (EU-certified). Versatile applications: - The unit can be removed from the truck bed and used separately (especially important during winter). Additional options: - Cleaning of construction machinery, gardens, parks, playgrounds, kindergartens, schools, offices, traffic signs, facades, parking lots, and much more. - Hot water function. - Power sockets (mobile generator) for your electric tools. - Quick couplings for an additional water tank. More photos and videos available on request.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! Djdpsxpvbtefx Aa Hjkt The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Condition: new, operating pressure: 130 bar, empty load weight: 164 kg, input voltage: 230 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM CA 11/130 TECHNICAL DATA: Model: KRANZLE THERM CA 11/130 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 660 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 130 Maximum pressure (bar): 145 Connected power (kW): 3.4 / 2.3 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM CA 11/130 EQUIPMENT KRANZLE pressure gun (M22 / quick connector) KRANZLE spray lance (quick connector) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m professional-class pressure hose KRANZLE external water filter WHY CHOOSE THE KRANZLE THERM CA 11/130? The THERM CA 11/130 model is ideal for factories, workplaces, and industrial halls. It is also successfully used in large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. A key advantage of this model is its power supply via a single-phase 230V socket, which translates into excellent mobility in terms of power supply points. The THERM line places a primary emphasis on smooth operation and continuous operation, making the CA 11/130 model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, a 25° power nozzle, and an external water filter. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded systems. RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow the device to be transported with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. A high-pressure gun with lance, 10m high-pressure hose, and a Power nozzle are standard. The device also features a quick-connect accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. Single-phase power supply (230V) The device is brand new. Dodpfsy Sg Swsx Aa Hskt

Condition: new, functionality: fully functional, operating pressure: 180 bar, empty load weight: 135 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KARCHER HDS 8/18-4 CXA PRESSURE WASHER TECHNICAL DATA: Model: HDS 8/18-4 CXA Manufacturer: KARCHER Country of manufacture: Germany Series: Professional Condition: NEW (washer in factory packaging) Type: Hot water Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Djdpey Sm Dgefx Aa Hjkt Discharge capacity (l/h): 300-800 Working pressure (bar): 30-180 Maximum pressure (bar): 220 Fuel consumption (kg/h): 5.2 Water heating range (°C): min 80 - max 155 Fuel consumption in eco mode! (kg/h): 4.2 Connected power (kW): 6 Power cable (m): 5 Hose length (m): 15 Fuel tank (l): 15 Weight with packaging (kg): 135 Dimensions (L x W x H) (mm): 1250 x 650 x 920 KARCHER HDS 8/18-4 CXA EQUIPMENT: Pressure gun: Karcher Professional !EasyForce Advance High-pressure hose: Karcher Professional 15M, DN6, 250BAR, 155°C - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Power nozzle with 25° flat stream. Flat high-pressure jet with high surface coverage and good dirt removal. Pressure regulator: ServoPress pressure regulator Automatic drum: Integrated, original automatic drum WHY CHOOSE THE HDS 8/18-4 CXA? With its ability to heat water to 155°C (steam cleaning above 100°C), the HDS 8/18-4 CXA, combined with a cleaning agent, effectively removes even the most stubborn dirt. The device also uses minimal water and fuel for heating thanks to the eco!efficiency mode, ensuring economical operation. Thanks to its compact dimensions and low weight, the device can be easily transported in a station wagon. Accessory holders on the rear of the housing allow for convenient storage of the lance and power cable. The large water filter installed at the water inlet is easy to remove and clean, further protecting the pump from water contamination. Large wheels and a compact, vertical design make it easy to transport the device over uneven terrain and overcome obstacles such as curbs. AUTOMATIC HOSES REEL: The HDS 8/18-4 CXA model is equipped with a unique, automatic hose reel, which significantly improves workflow. The automatic rewind system helps keep things organized, saves time, and protects the hose from mechanical damage when reeled. The reel itself is made of the highest quality materials, ensuring trouble-free operation. KARCHER HDS 8/18-4 CXA RELIABLE | DURABLE | ERGONOMIC The HDS line emphasizes ergonomics and work comfort. Due to its compact size, the device can operate in hard-to-reach places or where work often requires multiple locations. The device is equipped with a unique, automatic pressure hose reel. Additional handles allow for transporting the device with additional accessories. A brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes an EASY!Force high-pressure gun with a rotating lance, a 15m high-pressure hose with an automatic reel, a pressure regulator, and a power nozzle. EASY!Force technology reduces the force required to hold the gun trigger to zero. The device also features the EASY!Lock accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. The device is brand new and factory-sealed.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Dsdjywnr Nspfx Aa Hekt Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 3,250 mm, feed length Y-axis: 1,500 mm, spindle speed (max.): 4,200 rpm, table load: 35,000 kg, CNC SELCA 4040 DH Maximum drilling depth in single cycle, V axis: 1,500 mm Column, longitudinal travel X axis: 3,250 mm Vertical travel Y axis: 1,500 mm Drilling slide, workpiece support movement W axis: 500 mm Maximum workpiece height: 2,400 mm Clamping table and workpiece approach movement U axis: 1,000 mm Controlled radial resolution, B axis: 360,000 divisions/rev Clamping table, rotating surface size: 1,600 x 1,800 mm Clamping table, max load with rotating workpiece: 20,000 kg Standard T-slot size: 22 mm Minimum–maximum solid drilling diameter: 5 – 50 mm Rapid feed rate, adjustable max speed: 8,000 mm/min Drilling spindle rotation speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 15 kW Gun drill tool holders: Shank for drill Ø < 6 mm: Ø 10 x 40 mm Shank for drill 6 mm < Ø < 25 mm: Ø 25 x 70 mm Shank for drill Ø > 25 mm: Ø 40 x 70 mm Dimensions and weights Width x Length x Height MF 1500 BB: 5,900 x 7,600 x 3,850 mm Total weight: 42,000 kg Oil tank capacity: 600 – 1,200 liters WORK SLIDE TILTING Minimum / maximum vertical inclination – A axis: +20° / -20° Continuous controlled radial resolution: 0.001° MILLING HEAD – ISO 50 spindle connection Max horizontal working stroke – Z + W axes: 1,000 mm Column longitudinal travel – X axis: 3,250 mm Drilling slide vertical travel – Y axis: 1,500 mm Spindle rotation speed, adjustable max: 2,500 rpm Spindle power (S1 duty): 17 kW Maximum spindle torque: 680 Nm ROTO-TRANSLATING CLAMPING TABLE Max clamping surface: 2,000 x 2,000 mm Dkjdpfxeyymdio Aa Hot Max horizontal travel – U axis: 1,000 mm Continuous controlled radial resolution: 0.001° Max rotating workpiece load: 35,000 kg Standard T-slot size: 22 mm Machine complete with: • Remote electronic handwheel • ISO 50 tool changer magazine with 10 positions • Many tools and working equipment • Rack with various drills • User manual, maintenance manual, and CE conformity declaration