Used Hinge Boring Machine for sale (64,604)

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: - Number of drilling spindles: 21 pcs, 32 mm pitch - Drilling direction: from below and end-face Hsdpfsxwz Ihjx Afnsnh - Swivel: 0–90 degrees via handwheel - Pneumatic material clamps: 3 pcs - Passage: max. 100 mm height and max. 640 mm width - Motor: 1.5 kW - Extraction connection diameter: 120 mm - Includes a variety of stops (see pictures) Availability: approx. mid-April 2026 Storage location: Hesse

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain bore capacity in steel 40 mm spindle taper MK 4 Hedpsxwzg Rjfx Afnjnh bore spindle stroke 170 mm spindle turning speed - stepless 10-2.000 U/min ll diameter 230 mm table dimensions 900 x 770 mm vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2004, Drill chuck: Two-jaw chuck; Speeds: 2800 rpm; Drilling stroke: 200 mm; Max. drilling depth: 150 mm; Operation: Single-handed; Height adjustment: manual; Clamping cylinder: 1 pc; Clamping cylinder activation: Hand-operated eccentric; Version: movable drill head; Drill head tiltable: Yes; Table width: 630 mm; Table depth: 285 mm; Weight approx.: 240 kg; Motor power: 2.2 kW; Extraction diameter: 80 mm Location: Customer Hnodpfx Ajxbiu Rofnsh

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Hnjdpfxjwd U U De Afneh Location:

Condition: used, Year of construction: 1985, Used machine Hodpfx Afswka Hfenjnh Year of manufacture: 1985 Features and technical data: - For construction drilling horizontally and vertically - For vertical row drilling with 32 mm spacing - Vertical drilling unit with freely positionable double spindle drill heads on index shaft - 1.5 kW motor with 1400 rpm - 1.5 kW motor with 2800 rpm - Drill heads with pneumatic stroke - Pneumatic material clamps - Pass-through width approx. 850 mm - Includes various stops and drill bits Availability: short notice Location: Röllbach

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm Hnjdpfx Afeq Dlznjnjh table 590 x 350 mm, 360° turnable Misc. Accessories Marcels Maschinen AG

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, hone diameter: 600 mm, ELSA portable line boring machine for boring diameters from ø 62 to 600 mm. The machine is supplied with a control panel, boring bar ø 60 x 2200 mm, 2 main bearings, 2 intermediate bearings, 1 tool holder ring for ø 120 to 250 mm, 1 tool holder ring for ø 250 to 600 mm, 1 centering kit for through holes, 1 centering mechanism for ø 250 to 600 mm, 1 centering kit for blind holes, 1 dial gauge, 1 dial gauge holder, 1 internal gauge. Machine designed for on-site operations. With the purchase of a portable line boring machine, free training is offered at our workshop. Hnedpow Ic Dyofx Afneh

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, warranty duration: 6 months, hone diameter: 400 mm, Portable line boring machine for diameters from ø 42 mm to 400 mm. The machine is supplied with its accessories: 1 control panel, 1 main bearing, 1 intermediate bearing, 1 bar ø 40 x 2200 mm, 1 through-hole centering kit, 1 tool holder for ø 100 to 400 mm, 1 blind hole centering mechanism, 1 dial indicator, 1 dial indicator holder, 1 internal gauge. Machine overhauled in our workshop with 6-month parts warranty. Several optional kits are available to increase the machine's capabilities, including overlay welding. Machine suitable for on-site and fieldwork. With the purchase of this machine you receive free training in our workshop. Hodpfjw Idpkox Afnenh

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, warranty duration: 6 months, hone diameter: 600 mm, Portable line boring machine for diameters from ø 62 to 600 mm. This machine is designed for on-site boring operations. Supplied with standard accessories: control panel, ø 60 mm x 2200 mm bar, 2 main bearing supports, 2 intermediate bearing supports, 1 dial gauge, 1 dial gauge holder, 1 internal gauge, 1 tool holder for ø 120–250 mm, 1 tool ring holder for ø 250–600 mm, 1 centering kit for through holes. The machine can be optionally equipped for welding overlay operations. Hnjdpfx Afjw Iczfenjh

Condition: used, x-travel 400 mm y-travel 250 mm tool taper ISO 40 turning speeds 40 - 3.150 U/min table dimensions 630 x 300 mm table load 150 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Hnsdpoxu Nxpsfx Afneh

Condition: good (used), Year of construction: 1981, Dimensions (L/W/H) 660x1050x1600 mm metric thread M 33 Messing metric thread M 16 Gußeisen metric thread M 14 Stahl no. of flutes 25x10mm 2x T-Nuten throat 220 mm Hnedpfx Afoul Eg Denoh weight 730 kg

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t. Hnedpfx Aou T Ty Hefnoh

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Hnsdsu Nyxwepfx Afnjh Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter installation on request. price free on truck Rotterdam.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, Hodpfovl Eynox Afnjnh drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the 'new' own brand of: HoKuTech GmbH & Co. KG --- Slot Mortising Machine VD 20 R Motor 1.5/1.9 kW, Lateral travel in Y-axis 250 mm, Longitudinal travel in X 340 mm, Vertical travel in Z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel boring device with divisions 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, Hnederxcylspfx Afneh manual digital display for drill height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Table rotatable +/- 45°, Weight approx. 345 kg available immediately from stock Seevetal, subject to prior sale,

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Hnsdjif Az Uepfx Afnsh Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: Hnsdped Ih Hyefx Afnjh - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 100 mm Z axis - 105 mm 1 drilling unit horizontal (dowel drilling unit left) Drilling motor 380 V, 1,100 W Clamping chuck d = 8/10 4,000 - 11,000 rpm can be adjusted 1 drilling unit vertically from above - fixed Drilling motor 1.1 KW, 3,000 rpm Quick change of the drill head 1 drill head BKF 2/3, quick-changeable, (corner bearing) On the loose part, hardware according to customer requirements including drill replacement Control: electro-pneumatic with three axes NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE compliant, with 1 set of drilling tools Dübo je 1xd = 6,8,10,14 + 2 Roughing cutter d = 16, 1 milling cutter d = 20, ready for connection 1 drill head BKF 3, fast exchangeable for olives including drill bit Fitting according to customer requirements 2 drilling units 1 x horizontal for drilling from above (for tapes) 1 x vertical for dowel work, right Drilling motor 1.100 Watt, infinitely variable 4,000 - 11,000 rpm with collet chuck ER 20 2 Milling units for lock boxes 1 x horizontal for tapes, lock boxes 1 x vertically from above for PZ, pushers, tapes Milling motor 2.2 KW Speed ??adjustable 3,000 - 16,000 rpm Clamping tool holder ER 25 1 length stop right and left, working length 2.8 m NC-controlled When the length stop is used, the fixed stops are removed. Dimension: LxBxH = 2.50 x 1.50 x 2.20 m - Weight machine 850 kg PowerDrill LxBxH = 0,30 x 0,30 x 6,00 m - Weight length stop 100 kg 1 Dübelleim- and press-in station consisting of: - Swing conveyor for dowels with feed -Dübeleinpressstation -High pressure glue pump made of stainless steel with glue container - Full jet valve for precise glue application Exhaust nozzle Price for 1 dowel diameter The basic machine will be about 300 mm longer (Technical data according to manufacturer - without guarantee!)

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Hnsdsxpww Ajpfx Afnsh Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, compressed air connection: 5 bar, From business closure Schleicher dowel drilling machine DBS 1000 Year of manufacture: 1979 Also ideal for line boring with 5mm holes, 32mm spacing Comes with 25 pcs. 5mm carbide-tipped brad point drills and 8mm carbide drills, as well as 16mm and 35mm drill bits for cup hinges and other drill bits Pneumatically tiltable to horizontal/vertical position Machine is mobile Payment in cash upon collection Hjdpfox Avf Sjx Afnenh No warranty

Condition: used, Year of construction: 1974, spindle diameter 90 mm x-travel 1000 mm y-travel 1200 mm z-travel 1200 mm feed movement 710 mm spindle taper ISO 40 turning speed range 8 - 1600 U/min table-size 1120 x 1000 mm table rotating 360 ° table load 2,5 t total power requirement 11 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 3,3 x 3 m separate switchboard, rapid traverse some tool holders, without facing plate, without steady rest, Hjdpfx Aetv Ibdefnenh

Condition: good (used), Year of construction: 2017, Manufacturer: MIBA Type: NC-Milling Machine Control: Siemens TOUCH Year of manufacture: 2017 Z Axis 1100 mm X Axis 1310 mm C Axis Endless Hsdpfswq Hwdex Afnonh Working range stage 1: 4000 - 8500 mm Working range stage 2: 4000 - 11,500 mm Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 14400 mm Width 12000 mm Height 6000 mm Weight 24000 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you check all important details.

Condition: new, Year of construction: 2025, neu 2025 030138 ca. 2 - 4 Wochen ab Auftr Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min 0,54 (230 V, frequenzgere kW M 10 (steigungsabhängig) 520 mm 400 mm 850 mm Hodpsxcbhrjfx Afnjnh 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: excellent (used), 0.75 kW motor Spindles 8 2 pneumatic clamps Hnodpfotrtz Ejx Afneh Pawl 6

Condition: excellent (used), Drill Pade Hnodsttlbgopfx Afnjh Model: 3L MATIC

Condition: excellent (used), 6 drilling units with two heads two side heads spindles span 32mm max material length 2250mm magazine feeding manual regulation of units span rotated heads pneumatic top pressure drilling depth regulation Hnodpfjw Ad Tmex Afnjh