Hole line boring machine

Schleicher

Year of construction: 1993, condition: ready for operation (used), A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible. Giedpfew Az Rpjx Afnjn

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. Gijdpfx Asxnlflsfnen - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, machine/vehicle number: 48111, Mitring machine Schleicher F7Serial-No. 48111- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gedpfx Afsh Axthenjin

Condition: used, Year of construction: 1970, material width 200 mm material thickness 0,5 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm power requirement 3,1 kW weight 1,1 t dimensions (WxDxH) 1,5 x 1,2 x 1,9 m as is where is, WITHOUT putting into operation Gijdpjvzxm Hofx Afnsn Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1996, Polymacc edge banding machine mod. Rubber S.A. serial number PL-O-205 SA year of construction 1996 CE marked Gijdpfx Aewlm Sqsfnon

Condition: used, Year of construction: 1983, material width 200 mm Godovuk R Ropfx Afnoin material thickness 0,8 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 53 mm number of draw-in rolls 2 diameter of draw-in rolls 96 mm material cross-cut 400 mm² speed 3 - 15 m/min power capacity 0,75 kW weight 0,5 t Dimensions (WxDxH) 1,0 x 1,0 x 1,4 m with infinitely variable drive, straightening rolls individually manually adjustable, coil loop control can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t Giodpfx Asvuugijfnen dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Pitch max. 768 mm Godpsv Hnr Ajfx Afnein boring spindle 2 x 25 dividing 32 mm

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm Giedpfx Aovut Dtsfnen coil external diameter 1320 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: good (used), Safety relay, relay, contactor, semiconductor contactor, contactor -Type: SSP 34 Godpeb A S Naefx Afnoin -Re1: 220 V 50 AC -Re2: 220 V 50 AC -500W max. 380V max. 6A max. Quantity: 1 piece available -Weight: 0.7 kg

Condition: used, Year of construction: 2018, functionality: fully functional, number of spindles: 35, SECOND-HAND MULTISPINDLE DRILL WITH 35 SPINDLES MAGGI BORING SYSTEM 35 YEAR 2018 Gsdpox Rcqgjfx Afnsin - Center distance 32 mm.

Condition: used, PLC control, digital input, digital input, input module Godpfeqku I Nex Afnsin -Manufacturer: Schleicher, digital input Digital Input 24VDC -Type: UBE 24V 10D 31406792 -Quantity: 3x module available -Price per piece -Dimensions: 150/35/H200 mm -Weight: 0.5 kg/pc.

Condition: used, PLC control, digital output, digital output -Manufacturer: Schleicher, digital output Digital Output 24VDC/2A -Type: UBA 2A 31407502 -Quantity: 2x module available -Price per piece Giodpfx Aoqku I Tofnen -Dimensions: 150/35/H200 mm -Weight: 0.5 kg/pc

Condition: used, Year of construction: 1989, with many drills used, top condition Make Hoffmann Type DB 23 Year of manufacture 1989 Machine no. 169 Number of spindles 23 Number of drilling beams 1 Spindle spacing / grid 32 mm Drilling from below stroke 60 mm Stop rulers with central adjustment Gedsvyurcepfx Afnsin Working width 704 mm (1080 - portal passage) Drilling depth 70 mm horizontal Drill holder M 10 / cone 30° Space required approx. 1300 mm x 1000 mm x 1300 mm Weight approx. 500 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: used, PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, central processing unit -Manufacturer: Schleicher, Master CPU Central Processing Unit -Type: UCN 31306786 -Quantity: 1x module available Gijdpfx Asqku Nfsfnsn -Dimensions: 150/35/H200 mm -Weight: 0.6 kg